boat sailboat classic

Classic Yacht Register of Heritage

ClassicSailboats.Org

ClassicSailboats.Org (CSO) is a not-for-profit maritime publication and the world’s largest alliance of guardians, and preservationist. We are dedicated to preserving the spirit and historical record of vintage & classic sailing vessels. While remaining committed to protecting historical maritime properties, our precious oceans, waterways & wildlife.

As educators it is important to extend our reach to the communities, organizations and schools that would otherwise be unable to access our message because of geographical, and sociological limitations. The application of STEM through our initiatives 10 Class, Bluestar, Greenstar, and Sailing for Water is our educational mission. Whether following the progress of expeditions to the Pacific to study plastic pollution, or to the Arctic to study the effects of the loss of salinity from our oceans. It is our pledge “To empower people of all ages to make smart decisions today that will affect the quality of life for future generations to come.”

As preservationist and historians each classic vessel has a unique story to tell. The Classic Yacht Register of Heritage, on the CSO website, has become a go-to reference for historians, former guardians, their families, and the general public. An important part of CSO’s mission is to promote the rich history and intriguing human interest stories associated with these classics, preserving and adding to their cultural significance for future generations to come.

The topics and stories that are focused on our publication are made possible through the hard work and achievements of our alliance, and through the associated supporting cast of the collective initiatives. We look forward to expanding the reach of our cultures and remain dedicated to our collective efforts. The stories, and racing histories of these magnificent craft are important to the overall valuation of each yachts role in history. We encourage our readers to contribute with historical contributions (comments) when possible.

Team Ten Class – Our collective mission is to bring awareness to the overuse of plastics that are effecting the overall health of our oceans, the blue heart of our planet. To bring a call to action to the communities we serve, through Science, Technology, Education and Math; to create a venue for recognizing the efforts in “Keeping the Legends Alive,” through periodical “Lifetime Achievement Awards.” Our race team is historical in design, spartan in concept, and void of modern day conveniences…pure vintage racing machines.

Advisory Board – The purpose of our Advisory Board is to gain outside expert and independent advise on the role and message that ClassicSailboats.Org will pursue for the communities we serve, and for stewardship for the environmental and philanthropic causes that are collectively important to us.

Sustainability and the Capacity to Endure – To continue to exist in the same state or condition has been a real challenge for all custodians and stewards of Vintage, Classic and Spirit of Tradition yachts and that of our Team boats. Preserving the ecosystems and environments that we sail in are equally as important, in our quest for sustainability. In our organizational capacity we will provide a means in achieving low environmental impact by exemplifying the importance of using renewable and biodegradable resources when possible.

Privacy Policy and Compliance – Classic Sailboats is committed to protecting your personal information. Classic Sailboats will gather and use information through Classic Sailboats Web site only in the ways disclosed in the following statement.

Classic Sailboats will be periodically updating it’s Privacy Policy to ensure you enjoy continued high standards of data protection and management. This is a part of Classic Sailboats compliance with the EU General Data Protection Regulation (GDPR) which comes into force on 25th May, 2018… read more

Hello, My father, Graham Newland was involved in the building of many classic yachts in Sydney, Australia. I have just published his memoirs. Is this something you can promote on your website? I can send you a precis if you wish. kind regards, Jan

I would love to know more about the P class I think a number of them have been rebuilt. Are they being found in the US or Europe?

Leave a Comment Cancel

Your email address will not be published. Required fields are marked *

Email Address:

Save my name, email, and website in this browser for the next time I comment.

This site uses Akismet to reduce spam. Learn how your comment data is processed .

The global authority in superyachting

• NEWSLETTERS
• Yachts Home
• The Superyacht Directory
• Yacht Reports
• Brokerage News
• The largest yachts in the world
• The Register
• Yacht Advice
• Yacht Design
• 12m to 24m yachts
• Monaco Yacht Show
• Builder Directory
• Designer Directory
• Interior Design Directory
• Naval Architect Directory
• Yachts for sale home
• Motor yachts
• Sailing yachts
• Explorer yachts
• Classic yachts
• Sale Broker Directory
• Charter Home
• Yachts for Charter
• Charter Destinations
• Charter Broker Directory
• Destinations Home
• Mediterranean
• South Pacific
• Rest of the World
• Boat Life Home
• Owners' Experiences
• Interiors Suppliers
• Owners' Club
• Captains' Club
• BOAT Showcase
• Boat Presents
• Events Home
• World Superyacht Awards
• Superyacht Design Festival
• Design and Innovation Awards
• Young Designer of the Year Award
• Artistry and Craft Awards
• Explorer Yachts Summit
• Ocean Talks
• The Ocean Awards
• BOAT Connect
• Between the bays
• Golf Invitational
• Boat Pro Home
• Pricing Plan
• Superyacht Insight
• Product Features
• Premium Content
• Testimonials
• Global Order Book
• Tenders & Equipment

Are these the 8 most beautiful classic sailing yachts of all time?

Moonbeam of fife iii, 1903.

The 30 metre, gaff cutter Moonbeam of Fife III epitomises beautiful classic yachts at their finest. Launched in 1903, Moonbeam of Fife is still going strong on the classic yacht regatta circuit despite being more than a hundred years old. The William Fife-designed yacht is constructed in wood with an oak hull and superstructure, while her interior joinery is well-kept mahogany. The historical yacht Moonbeam of Fife III is currently for sale .

Tuiga, 1909

Built by the renowned William Fife shipyard in Fairlie on the Clyde estuary in Scotland, Tuiga was commissioned by the Duke of Medinaceli, a close friend of the King of Spain, Alfonso XIII, and has had 10 owners in 106 years. HSH Prince Albert II decided to buy her in 1995.  Tuiga  has been participating in classic yacht regattas ever since and is now the flagship of the Yacht Club de Monaco, crewed by YCM members.

Mariette, 1915

The classic 42 metre twin-masted schooner _ Mariette of 1915  _was built by Herreshoff in the United States 100 years ago. Age has not withered her, but  Mariette of 1915  has undergone a few refits in the Pendennis yard at Falmouth in recent years: in 2010 and again in 2012 in preparation for the Pendennis Cup, in which she took first prize in the St Petroc Traditional Class as well as being crowned overall winner. In 2014 she returned to Falmouth once more for minor works.

Creole, 1927

Now owned by the Gucci family, this beautiful wooden schooner has had a colourful history. Commissioned by wealthy American Alan Cochran and launched in 1927,  Creole  has had a number of different owners and also been called Vira. When she was known as  Magic Circle , she was transformed into a minesweeper during the Second World War, having previously competed in a number of regattas and attended previous America’s Cup events. In the 1970s she was used by the Danish government for sailing training in the rehabilitation of drug addicts before being bought by the Gucci family in 1983.

Endeavour, 1934

Arguably the world’s most famous J Class,  Endeavour  was the British challenger in the 1934 America’s Cup , but was beaten by the Harold Vanderbilt-owned Rainbow . Endeavour was commissioned by Sir T.O.M. Sopwith, who was keen to ensure that this yacht was the most advanced design possible. With his experience designing aircraft, Sopwith applied aviation technology to Endeavour ’s rig and winches and spared nothing to make her the finest vessel of her day.

She swept through the British racing fleet and into the hearts of yachtsmen around the world, winning many races in her first season. Though she did not win the America's Cup she came closer to doing so than any other challenger.

Since 1934, she has often led a perilous existence, even being sold to a scrap merchant in 1947 only to be saved by another buyer hours before her demolition was due to begin. In 1984, American yachtswoman Elizabeth Meyer bought Endeavour and she was transformed and rebuilt by Royal Huisman. Endeavour sailed again on June 22, 1989, for the first time in 52 years. J Class yacht  Endeavour  is now for sale .

Elena, 1910

In 1910, Morton Plant commissioned 55 metre  Elena to be designed by American naval architect Nathanael Herreshoff, the so-called “Wizard of Bristol”, who made his name designing sailing yachts for America’s elite. Plant's brief was to the point: he wanted a schooner “that can win”.

Herreshoff gave Elena a slightly deeper keel than preceding designs of that time, lowering her centre of ballast, which improved her windward ability. Elena won most of her early races against the cream of the American schooner fleet and in 1928 came her crowning glory, victory in the Transatlantic Race. In 2009, she was rebuilt using the original plans for the first Elena.

Black Swan, 1899

Originally designed by Charles Nicholson and built in 1899 at Camper and Nicholson in Gosport, England, Black Swan started life as Brynhild with a yawl rig. She won a number of races at the beginning of the 20th century, including the King’s Cup. Over the years, she has undergone several changes and different rig configurations, and at one stage she was renamed Changrilla . She was rechristened Black Swan in the 1960s and, today, after an extensive restoration project at the Beconcini yard in La Spezia, Italy, she is now carrying a gaff-rig, designed by the Faggioni Yacht Design Studio and built by Harry Spencer.

Mariquita, 1911

Another beautiful classic yacht from Fife, Mariquita was launched in 1911. The 38.16 metre sailing yacht was designed and built for the industrialist Arthur Stothert. As part of the 19 metre Big Class racing that re-emerged in 1911, this gaff-rigged cutter is said to have inspired the J Class yachts that came after her.

She raced competitively against her brethren from 1911-1913, but by the 1950s, Mariquita was the last in the 19 metre class remaining. She was restored in 1991 and received a further refit in 2004. A star on the classic yacht racing scene, Mariquita is now for sale .

Sponsored listings

• BOAT OF THE YEAR
• Newsletters
• Sailboat Reviews
• Boating Safety
• Sailing Totem
• Charter Resources
• Destinations
• Galley Recipes
• Living Aboard
• Sails and Rigging
• Maintenance
• Best Marine Electronics & Technology

40 Best Sailboats

• By Cruising World Editors
• Updated: April 18, 2019

Sailors are certainly passionate about their boats, and if you doubt that bold statement, try posting an article dubbed “ 40 Best Sailboats ” and see what happens.

Barely had the list gone live, when one reader responded, “Where do I begin? So many glaring omissions!” Like scores of others, he listed a number of sailboats and brands that we were too stupid to think of, but unlike some, he did sign off on a somewhat upbeat note: “If it weren’t for the presence of the Bermuda 40 in Cruising World’s list, I wouldn’t even have bothered to vote.”

By vote, he means that he, like hundreds of other readers, took the time to click through to an accompanying page where we asked you to help us reshuffle our alphabetical listing of noteworthy production sailboats so that we could rank them instead by popularity. So we ask you to keep in mind that this list of the best sailboats was created by our readers.

The quest to building this list all began with such a simple question, one that’s probably been posed at one time or another in any bar where sailors meet to raise a glass or two: If you had to pick, what’re the best sailboats ever built?

In no time, a dozen or more from a variety of sailboat manufacturers were on the table and the debate was on. And so, having fun with it, we decided to put the same question to a handful of CW ‘s friends: writers and sailors and designers and builders whose opinions we value. Their favorites poured in and soon an inkling of a list began to take shape. To corral things a bit and avoid going all the way back to Joshua Slocum and his venerable Spray —Hell, to Noah and his infamous Ark —we decided to focus our concentration on production monohull sailboats, which literally opened up the sport to anyone who wanted to get out on the water. And since CW is on the verge or turning 40, we decided that would be a nice round number at which to draw the line and usher in our coming ruby anniversary.

If you enjoy scrolling through this list, which includes all types of sailboats, then perhaps you would also be interested in browsing our list of the Best Cruising Sailboats . Check it out and, of course, feel free to add your favorite boat, too. Here at Cruising World , we like nothing better than talking about boats, and it turns out, so do you.

40. Moore 24

39. Pearson Vanguard

38. Dufour Arpege 30

37. Alerion Express 28

36. Mason 43/44

35. Jeanneau Sun Odyssey 43DS

34. Nor’Sea 27

33. Freedom 40

32. Beneteau Sense 50

31. Nonsuch 30

30. Swan 44

29. C&C Landfall 38

28. Gulfstar 50

27. Sabre 36

26. Pearson Triton

25. Islander 36

24. Gozzard 36

23. Bristol 40

22. Tartan 34

21. Morgan Out Island 41

20. Hylas 49

19. Contessa 26

18. Whitby 42

17. Columbia 50

16. Morris 36

15. Hunter 356

13. Beneteau 423

12. Westsail 32

10. Alberg 30

9. Island Packet 38

8. Passport 40

7. Tayana 37

6. Peterson 44

5. Pacific Seacraft 37

4. Hallberg-Rassy 42

3. Catalina 30

2. Hinckley Bermuda 40

1. Valiant 40

• More: monohull , Sailboats
• More Sailboats

Meet the Bali 5.8

Celebrating a Classic

New to the Fleet: Italia Yachts 12.98

Leopard 40 Prelude Listed For Sale

The Moorings Expands in Croatia

C-Map Updates North America Charts

St. Vincent Court Orders Deportation For Hijacking Suspects

• Digital Edition
• Customer Service
• Privacy Policy
• Terms of Use
• Email Newsletters
• Cruising World
• Florida Travel + Life
• Sailing World
• Salt Water Sportsman
• Sport Fishing
• Wakeboarding

Many products featured on this site were editorially chosen. Cruising World may receive financial compensation for products purchased through this site.

Copyright © 2024 Cruising World. A Bonnier LLC Company . All rights reserved. Reproduction in whole or in part without permission is prohibited.

Classic Boats & Antique Boats

Classic boats for sale archives: sold classic boats classic inboard engines classic boat restoration shop sell your antique boat how to restore a classic boat facebook mahogany lumber identify your classic chris craft & hull numbers about us privacy policy custom trailers, can i have it varnished before mitch delivers, classic boats for sale & vintage rebuilt engines specializing in classic chris craft boats, welcome to classicboat.com your source for classic boat sales, restoration and information., classic boat restoration shop, why buy a boat from a classic boat dealer, classic runabout vs utility, antique boat maintenance questions, rebuilt engines for classic boats we have about 60 classic chris craft engines in stock, ready to rebuild and ship to your marina or mechanic in the 48 states. we will even take your old vintage engine on trade. we specialize in chris craft 6 cylinder hercules engines and classic inboard v8 engines, including vintage chevy 283 v8s. selling your classic boat call mitch to sell your classic chris craft boat in any condition, he will pick it up anywhere in the continental usa, and pay you on the spot. in most cases, we prefer to buy your classic boat outright rather than consign it, but we do offer antique and classic boat broker services., identify your classic chris craft, boat collection:.

Parts | Site Map | Contact Us | Books About Antique Boats Wooden Boat Links | Wooden Boatbuilders of the Past

• Getting latest antique boats for sale ....

Login with your email address to see your favourites.

Logout of antique boat america.

Headquartered in the Heart of the 1000 Islands and operating throughout North America and Worldwide. We facilitate the buying and selling process by bringing together the most comprehensive marketplace of available boats. The listings provide specifications, photos, locations, and all necessary information to facilitate “the hunt”. Still looking for that special boat? Let us find it for you!

Buy a boat Browse our inventory of 1,274 classics currently available

Sell your boat List your boat in the World's most comprehensive marketplace

Store Visit our online store for more antique boat merchandise

• Use this link to find the perfect antique boat you have always wanted.
• Use this link to list your boat for sale on our site
• Use this link to visit our online store
• Sign up to our newsletter to keep current on all things antique boat.
• Show this help screen later if you need it

Let us show you around

Show me around Go

Maybe later not now

I know how things work got it, thanks

Classic Sailboat Shop

Specializing in the sale of small classic day sailers and weekenders.

Welcome to Classic Sailboat Shop Updated March 1, 2024

Located in the historic western massachusetts town of chesterfield, the classic sailboat shop specializes in the purchase, restoration and sale of small classic day sailers and weekenders in both fiberglass and wood.  we specialize in fine used marshall cat boats, arey’s pond catboats and daysailors, rhodes 19 by stuart marine, herreshoff designs from the herreshoff 12 1/2 to the fish class and the magnificent herreshoff alerion, as well as concordia buzzards bay 19, point jude 15, arey’s pond catboats, cape dory typhoon (one of our specialties), melonseed skifs, and of course  a variety of gannon & benjamin wooden boats, as well as joel white designs such as the bridges point 24 and rockport marine and brooklyn boatyard small yachts. if you are considering selling or purchasing a fine sailboat, feel free to contact us anytime at 413-335-6402 or e-mail tim mcelroy at:   [email protected].

News & Events – February 2024

2021 Rhodes 19 Sailboat by Stuart Marine with Trailer and 3HP Torqueeto Electric Outboard, and Loaded With Options.  Highly Recommended!  Details Below.         Asking $39,500.                                                             Contact Tim 413-335-6402    [email protected] 

Located in Western Massachusetts, this 2020 Stuart Marine built Rhodes 19 with retractable centerboard is in like new condition and loaded with approximately $8,000 in options.   A new boat as fitted currently costs $57,000.       Asking $39,500 This is a one owner, lift kept boat and is in like new condition.

Options Include:

3 HP Torqeedo Electric Outboard , Retractable Outboard Bracket Boom Vang , Lazy Jacks Full Cockpit Cushions Travel Cover Boom Tent Sail Cover Masthead Wind Indicator Bow Mooring Eye Bow Cleat Drain Plug

SOLD – Point Jude 15 – Like New   Exceptional 15′ 8″ Point Jude Daysailer has been kept in indoor storage and mostly un-used since new.  Her original Gell Coat is brightly polished, and all teak woodwork cockpit coamings, rail trim, tiller and rudder are solid, clean and bright.  The aluminum spars are bright and like new. The mainsail and jib are lightly used, crisp and not faded at all.   Running and standing rigging is in excellent condition.  Motor Mount.  The low mileage Galvanized Trailer is in excellent condition.   This is as close to a new Point Jude Sailboat as you will find. 

Melonseed Sailboat – (SOLD)

In  like new condition as it has been in heated indoor storage with a classic automobile collection, and unused for 21 years.    Everything is in perfect condition. The boat has an Ivory Hull, White Deck and Tanbark Sails and a perfect boat cover made to fit from the manufacturer.   The spars are beautifully varnished spruce. The boat comes with a galvanized trailer that is in like new condition.     Specifications    LOA 13’ 8”     Beam 4’ 3”    Draft 6” to 2’ 6”   .    Sail area 62 sq. ft.     13’ 8” x 4’ 3” x 235 LBS.

Summer 2021

Restoration Just Completed – Fiberglass reproduction of the Herreshoff Fish Class. This is very much a sister ship to the Classic Boat Shop PISCES. All Sails, Spars and Rigging in Excellent Condition. This is a magnificent example of the Fish!   The boat is available with or without the trailer.

Asking – Optional Trailer Availability. SOLD

Marconi rig with varnished wooden spars, Traditional club foot Jib Powered by 15 HP Saildrive Unit (Not an outboard). 

New Triad Trailer ,  New Topside Paint,  New Boot Stripe Paint,  New Varnish,  Bottom heavily sanded to barrier coat with New Bottom Paint   New Bronze Rudder Gudgeons and Pintles,  New Wiring ,  New Fuel Line,  New Fuel Tank,   New Breaker Panel ,  New Buss Bar ,  New Bilge Pump Switch

The boat will be available with or without the trailer, pending the needs of the buyer. The advertised price does not include the trailer

Buzzards Bay 15 Restoration Just Completed, July, 2020. SOLD

Herreshoff buzzards bay 15, (similar to watch hill 15)  professionally built in 1993. launched as “whisper” and listed in the herreshoff registry as build # 63.   , feel free to contact us at 413-335-6402or e-mail, tim mcelroy at:   [email protected], herreshoff buzzards bay 15     sold, she is currently at snediker yacht restoration located in stonington connecticut where in conjunction with classic sailboat shop, her hull, deck finishes and bright finishes were completely removed as well as removal of seam compound above and below the waterline.   she has now been re-calked, painted and varnished and looking gorgeous, the price listed is for the boat, includes  spars, sails, custom traditional rigging, boat covers and  custom lightweight aluminum trailer., professional surveys may be conducted at perspective buyers expense. reasonable offers will be considered., sold  2012 herreshoff goldeneye built by cape cod shipbuilding.  stored indoors, unused for 5 years.  shows like a new boat.  asking $37,900.         new cost with options almost $80,000.  see complete description below photos.  (listed dec. 21, 2019), feel free to contact us at 413-335-6402 or e-mail tim mcelroy at:   [email protected].

Self Bailing Cockpit Mainsail, Jib, Genoa, Storm Jib and Mooring Tent Self Tailing Jib Sheet Winches with teak bases Mainsail Halyard Winch Bulkhead Mounted Ritchie Compass with Inclinometer Custom Cockpit SoleTeak Grating Custom Cabin Sole Teak Grating Custom Cockpit Cabin Bulkhead Woodwork Custom Cabin Interior Woodwork Motor Mount VHF Radio Hand Held Sonar Depth Finder Hand Held GPS

3.5 HP Mercury 4 Stroke Engine, or available for additional charge Almost New Electric Torquito 3000 Travel. Triad Trailer with brakes, ladder, mast carrier and spare tire. Custom built to fit the Goldeneye Sailboat. Anchor, Line and Rhode

SPECIFICATIONS

2005  Herreshoff Alerion Constructed By       Gannon & Benjamin    SOLD

Classic sailboat shop in conjunction with snediker yacht restoration just completed refinishing all paint and varnish on this beautiful alerion. ready to go, she is outfitted with a 1gm10 yanmar diesel., for details, contact tim mcelroy at 413-335-6402 or email [email protected].

HAVEN 12 1/2 By Eric Dow of Brooklin Maine (Sold)

Beautiful 2003 Haven  12 ½  built by the Eric Dow Boat Shop of Brooklin Maine.  Joel White produced this design visually identical to the Herreshoff  12 ½  but with a centerboard and increased beam so that she can poke around in more shallow water than can the original Herreshoff, all the while maintaining many of the other attributes of the original Herreshoff design.

“diane” is in exceptional condition as she has only been sailed a handful of times and has spent most of her life indoors, unused.  , “diane” is constructed of cold molded mahogany. she is a gaff rigged boat with a club footed, self tending jib.  all blocks are of bronze.,  she comes with a custom built 2003 triad trailer and a full storage cover.  sold, gannon & benjamin rowing dingy      .

Coming from the drawing board of Nat Benjamin and built in Vineyard Haven by G&B in 2007, this beautiful rowing boat has spent most of it’s life, unused,and in covered storage at the Concordia Boat Yard.  She was painted and varnished by the Concordia yard in 2015 and remains in superior like new condition.  She is cedar planking on steam bent frames. Located in Western Massachusetts in the town of Williamsburg. Call 413-335-6402 or email [email protected]

Cape Dory Typhoon Daysailer/Weekender Completely Refinished  (Sold)  

Professionally Restored Cape Dory Typhoon. Professional restoration in Rockport Maine Work completed January 2015.

Ready to sail. 

SOLD…  If you would like one just like it, we would be happy to restore another to your color specifications.

Located in Western Massachusetts, near Northampton. Call 413-335-6402 or email [email protected]

AREY’s POND DAYSAILER 2007 (SOLD)

Exceptional 2007 Arey’s Pond 18’10” Daysailer.  Teak Decks, Roller Furling Genoa, Harken blocks and gear through out.  Carbon Fiber Mast as well as a second custom built clear spruce mast and spar.  2007 galvanized trailer custom fit.  This boat has been kept  unused in indoor storage for the past three seasons.

Call Tim McElroy at 413-335-6402 or email [email protected]

2008 Thomas Gilmer Blue Moon Yawl “TIME”

OR 413-335-6402 or e-mail [email protected]

• Already have a WordPress.com account? Log in now.
• Subscribe Subscribed
• Copy shortlink
• Report this content
• View post in Reader
• Manage subscriptions
• Collapse this bar

• New Sailboats
• Sailboats 21-30ft
• Sailboats 31-35ft
• Sailboats 36-40ft
• Sailboats Over 40ft
• Sailboats Under 21feet
• used_sailboats
• Apps and Computer Programs
• Communications
• Fishfinders
• Handheld Electronics
• Plotters MFDS Rradar
• Wind, Speed & Depth Instruments
• Anchoring Mooring
• Running Rigging
• Sails Canvas
• Standing Rigging
• Diesel Engines
• Off Grid Energy
• Cleaning Waxing
• DIY Projects
• Repair, Tools & Materials
• Spare Parts
• Tools & Gadgets
• Cabin Comfort
• Ventilation
• Footwear Apparel
• Foul Weather Gear
• Mailport & PS Advisor
• Inside Practical Sailor Blog
• Activate My Web Access
• Reset Password
• Pay My Bill
• Customer Service

• Free Newsletter
• Give a Gift

How to Sell Your Boat

Cal 2-46: A Venerable Lapworth Design Brought Up to Date

Rhumb Lines: Show Highlights from Annapolis

Open Transom Pros and Cons

Leaping Into Lithium

The Importance of Sea State in Weather Planning

Do-it-yourself Electrical System Survey and Inspection

Install a Standalone Sounder Without Drilling

Rethinking MOB Prevention

Top-notch Wind Indicators

The Everlasting Multihull Trampoline

In Search of the Snag-free Clew

What’s Involved in Setting Up a Lithium Battery System?

Reducing Engine Room Noise

Breaking Point: What Can Go Wrong With Your Yanmar?

Mildew-resistant Caulks for Boats

Can We Trust Plastic Boat Parts?

Repairing Molded Plastics

Mailport: Marine plywood, fuel additives, through bolt options, winch handle holders

The Day Sailor’s First-Aid Kit

Choosing and Securing Seat Cushions

Cockpit Drains on Race Boats

Rhumb Lines: Livin’ the Wharf Rat Life

Resurrecting Slippery Boat Shoes

Shoe Goo’s Gift to Sailors

Tricks and Tips to Forming Do-it-yourself Rigging Terminals

Marine Toilet Maintenance Tips

Learning to Live with Plastic Boat Bits

The Ultimate Guide to Caring for Clear Plastic

• Sailboat Reviews

Used Sailboats from the 1970s: Practical Sailor Puts Plastic Classics Under the Microscope

Pearson 30, tartan 30, and catalina 30 stand out in colorful field of groovy fiberglass boats..

The fiberglass revolution in boats really hit its stride in the 1970s. Builders experimented, learned, and improved construction processes during the 1960s, so by the early 1970s, there were a lot of big- time builders pumping out a lot of good boats. In the East was Pearson Yachts; in the Midwest was Tartan Marine; in the South, Hunter Marine and Irwin; in Canada, C&C Yachts flourished; and out West were Jensen Marine (Cal), Ericson, and Columbia Yachts, to name just a few of them.

Narrowing The Field

In selecting a handful of 30-footers for review, we figured why review a boat no one can find? So we browsed online listings for plentiful boats. We also consulted our own files for old brochures, lines drawings, and owner comments, as well as past reviews of each model.

While there were at least several dozen 30-footers built in the U.S. during the hippy-dippy days of Woodstock, The Smothers Brothers, and Watergate, the most enduring are those built by the major builders—all-around family boats sometimes called racer/cruisers or cruiser/racers. Whatever you call them, they are fun to sail and have sufficient accommodations for a family to live aboard for a week’s vacation.

The facing table shows the nine models we settled on for preliminary discussion: Tartan 30, Pearson 30, Catalina 30, Hunter 30, Irwin Competition 30, Newport 30, Cal 2-30, O’Day 30, and C&C 30. For various reasons, a number of interesting 30-foot designs are omitted—the S2 (1977), Sabre 30 (1979), and Dufour Arpege (1968) come to mind—primarily because they are on the cusp of a different time period where they seem a better fit.

Before we move onto the chosen three, here are brief notes on six models dropped in the final cut.

More than 800 C&C 30s were built between 1973 and 1984, making it one of North America’s most successful 30-footers of all time. Though C&C was a pioneer in the use of balsa core in sandwich hull construction, the early C&C 30s have solid-glass hulls. Like other C&Cs of this period, the keel and rudder are swept aft.

C. William Lapworth was the designer for nearly all of Jensen Marine’s (Costa Mesa, Calif.) many models. The 2-30 was in production from 1967-1973, followed by the 3-30, which lasted until 1976. Cals have stout solid fiberglass hulls, but fairly plain interiors.

The Hunter 30 was an early model from Hunter Marine, a spin-off of the Luhrs’ family’s powerboat company, Silverton. The boat was in production from 1974-1983, with more than 1,000 built. It came with a deep keel or keel/centerboard. The rudder was skeg-hung. The designer was John Cherubini, who worked for Hunter at the time. Marketed for value, workmanship was below average.

Irwin Competition 30

Based in Florida, Irwin Yachts built three different 30-footers in the 1970s: the Competition 30 (1972), Citation 30 (1978), and the plain ol’ 30 (1975). All designed by Ted Irwin, one-time kingpin of southeastern sailboats who fell from grace with a thud. Shoddy workmanship resulted in lawsuits he couldn’t overcome. Many of his designs, however, were quite good. The Competition 30 was configured to rate as a 3/4-tonner under the International Offshore Rule (IOR).

Newport 30 (PHASE ii)

Capital Yachts (Harbor City, Calif.) introduced the Gary-Mull-designed Newport 30 PHII in 1971. Like Hunter and Irwin, Capital Yachts’ boats were built to a price. Like the Irwin Competition 30, the Newport was designed to compete as a 3/4-tonner under the IOR. It’s noticeably lighter than many of these boats, and has a shorter waterline.

O’Day 30

More than 350 O’Day 30s were built between 1977 and 1984. Designed by C. Raymond Hunt Associates and built by Bangor Punta Marine, the boat came with a full keel or keel/centerboard (3’6″-7’2″). In 1984, the stern was stretched to make the O’Day 31. By some reports, the Ranger 30 and O’Day 30 share the same hull. (Bangor Punta bought the Ranger and Cal lines from Jensen Marine.)

Bottom Line

At this age, maintenance history is key. Any upgraded and well-preserved specimen from the above group may serve well as a family coastal cruiser, but we’d focus on the three finalists on the following pages: the Pearson 30, the Tartan 30, and the Catalina 30. All are fin keel, masthead sloops, but each has unique features that sets it apart and will appeal to certain buyers.

The Pearson 30 is the smallest of the three, but a good sailing boat that still competes in club races. It’s the lowest priced of the three. If you’re counting dollars, grab the best one you can find at your price.

The Tartan 30 has a stronger following than the Pearson, partly because of its S&S pedigree. It, too, sails very well. Engine placement poses some complications, but you can get used to it.

The Catalina 30 is the logical choice for the family battlewagon. It’s heavier, roomier, newer … and more expensive. With a displacement/length ratio of 291 and a sail area/displacement ratio of 15.1, however, don’t expect performance matching the Tartan 30 and Pearson 30.

Budget-friendly Pearson 30 reflects Bill Shaw’s growing influence.

The Pearson 30 was introduced in late 1971, and when the last boat went out the door in 1980, 1,185 units had been built. Most were sold in the early and mid 1970s. All were built in Portsmouth, R.I. The P30 was succeeded by the Pearson 303.

Bill Shaw joined Pearson Yachts in 1965, after Grumman bought the company from Everett and Clint Pearson, and during the following few years, he began to exert his influence on the design of the yachts. Fin keels and spade rudders replaced full keels with attached rudders, underbodies became shallower, and displacement less. In short, Shaw modernized the Pearson fleet, and the Pearson 30 is a good example of contemporary design at that time, in particular the swept-back keel and scimitar-shaped rudder. George Cuthbertson was drawing similar appendages at C&C, noting that test-tank data indicated super speed, but on the water, they proved not as efficient upwind as vertical keels and rudders with higher aspect ratios. Extra care must be taken in blocking the boat if not in a cradle.

Our July 15, 1984 review of the Pearson 30 added these comments: “The boat’s underwater shape is somewhat unusual. The hull is basically dinghy-shaped. The sections aft of the keel are deeply veed, however, so that deadrise in the forward and after sections of the boat is similar. Coupled with a fairly narrow beam by today’s standards, this provides a hull form that is easily balanced when the boat is heeled—an important consideration in this relatively tender 30-footer.”

Construction

The hull is a solid laminate with alternating plies of 1½-ounce mat and 18-ounce woven roving. The skin coat under the gelcoat is two layers of mat to prevent the pattern of woven roving from showing (print-through). The external flange of the hull-deck joint is secured with self-tapping screws and then fiberglassed. The deck is balsa-cored for stiffness.

Interestingly, the Pearson 30’s lead ballast is encapsulated in the fiberglass keel molding, which means there are no keel bolts to worry about. This is somewhat unusual for a fin-keel boat.

About the only problem particular to this boat is the rudderstock. Early boats had aluminum rudderstocks, some of which broke, prompting the company to replace the approximately 200 others with stainless steel. Even the stainless steel stocks were not without problems, turning as they do in Delrin bushings, which wear and cause slop in the steering system. They are owner replaceable, however, by removing the tiller fitting and dropping the rudder.

Molded fiberglass floor pans and headliners are bonded to the hull and deck. Through-hull valves may be gate valves (like garden faucets) or positive action seacocks; chainplates are properly through-bolted to structural bulkheads.

Pearson Yachts’ construction methods were above average.

Performance

Though not designed specifically as a racer, the Pearson 30 enjoyed many successes in IOR and Midget Offshore Racing Club (MORC) classes. In fact, it won the ¾-Ton North American championship in 1972. And it was a very popular club racer. It balances well and is quick through tacks. On the downside, it is tender. Our 1980 reviewer wrote, “In 15 knots apparent wind, we find that the boat is almost overpowered with the full main and 150 percent genoa. Gusts of 12-14 knots bury the rail, slowing the boat. The P30 does not, however, carry any substantial weather helm even when overpowered. Any tendency to round up or spin out can usually be controlled by a strong hand on the tiller and easing the mainsail.”

For family daysailing and cruising, smaller headsails are recommended.

Still actively raced in local fleets, a typical the Pearson 30 has a PHRF number of 174 seconds per mile.

Accommodations

The interior layout of the Pearson 30 is straightforward, with a V-berth forward, small enclosed head, settees in the main cabin, a quarter berth aft to port, and a compact galley in the starboard quarter area. The port settee converts to a double berth, so the plan totals six berths, which are more people than you’d want to spend much time with on a 30-footer.

The four portlights in the head and forward cabin are opening, which combined with the forward hatch provide decent ventilation. Unfortunately, the forward hatch isn’t big enough for emergency exit. There is no anchor well in the foredeck, a feature that became more common later in the ’70s.

There’s adequate stowage under, behind, and above the settees. The 1984 reviewer wrote: “Although the lockers are sealed to the bilge at the bottom, owners report that, with their boat heeled, bilge water finds its way into the lockers by running up the inside of the hull behind locker partitions, then down into storage spaces. Most dinghy-hulled boats lack real bilge space or a sump, and as little as a gallon of water in a boat of this type can be annoying.”

Other shortcomings are limited engine access (though not any worse than most boats of this size), and a galley sink and spigot that partially block the companionway. On the upside, the interior is light and airy. Headroom is 5’ 11″ in the main cabin.

As with any boat of this age, one should ask the surveyor to look closely for delamination of the core and deck skins, separation of the hull-deck joint, water in the rudder, corroded electrical wiring, corroded through-hulls, and hoses that need replacement.

On early Pearsons the cockpit scuppers were connected to the bottom of the hull by fiberglass tubes, rather than hoses and seacocks/through-hulls. Though probably safe and secure, this drain system does not satisfy American Boat & Yacht Council standards.

As noted earlier, there are just a few areas in which the Pearson 30 falls short of quality building standards, principally the rudder stock design in which bushings wear faster than usual.

Pearson Yachts once ran one of the best customer service departments in the business; alas, it’s been out of business for more than 20 years, and several of the more helpful owner association web sites seem to have disappeared.

The Pearson 30 is a fun boat to sail—quick and responsive. It has the lowest displacement/length ratio (238) and highest sail area/displacement ratio (17.3) of the three. If you like performance, the fact that it’s a little tender shouldn’t bother you much. Reef or just enjoy the ride. It’s not a big 30-footer, but nicely proportioned and of better- than-average construction. There are quite a few on the used boat market in the low and mid-teens, enabling bargain hunters to get into a full-size boat for not much money. Asking prices we saw online, for all years, average around $14,000, with lows around $8,000 and highs around $25,000.

Tartan 30 brings fine S&S cachet within reach of ordinary Joes.

Built by Tartan Marine in Grand River, Ohio, and at a plant in Hamlet, N.C., between 1971 and 1980, the Tartan 30 was one of the first designs introduced by Charlie Britton after buying out partner Ray McLeod. The company could complete a boat in less than 4 days. It filled in the gap between the Tartan 27 and Tartan 34. Production totaled 630 units.

The Tartan 30 (like the 27 and 34) was designed by Sparkman & Stephens, probably the world’s most prestigious yacht design firm at that time. The lines are clean and crisp. Like the Pearson 30, its LOA is 29’11,” so it could qualify for competition under the MORC, a rating rule under which it proved quite successful. The bow is raked, and the reverse transom gave it a very modern look for the early 1970s. It has a fin keel and skeg-mounted rudder; a Competition model offered a taller mast (by 3 feet), deeper keel (5’6″ vs. 4’11″ for the standard model), and 500 pounds more ballast. It’s beamier than the Pearson 30, and of about the same displacement, but with a slightly shorter waterline. The rig is fairly high-aspect ratio with large headsails.

A highly unusual feature is the location of the Atomic 4 auxiliary amidships, under the dinette table. This places the considerable weight of an engine exactly where you want it most, near the center of gravity, to minimize hobbyhorsing, which slows a boat and is uncomfortable. Access is better than the usual location aft behind the companionway. And that space is opened up in the T30. The disadvantage is it takes up space in the saloon, particularly seatspace and legroom at the table.

The lamination schedule is typical of this period: hand-laid mat and woven roving. Liners make for an easy-to-clean interior, but make customizing difficult; they also tend to sweat more than wood interiors, and are noisier.

Ballast is external lead hung on 1-inch stainless steel keel bolts. The rudder is partially supported by a bronze shoe secured to the skeg.

Interior and exterior wood is teak. The sole is covered with cork, a quality home flooring material of the 1950s and ’60s.

Of the rig, our Jan. 15, 1987 review noted: “The rig, like most of those specified by Sparkman & Stephens, was designed to be practically indestructible. Given its inherent strength, look primarily for the effects of corrosion at the spreaders and the butt. Many 30s have been fitted with babystays in lieu of forward lower shrouds. For typical cruising we think the babystay is a pain and probably unnecessary, so we’d make it detachable.” Some owners added babystays as a cure for mast pumping. The standard rig has just single lower shrouds.

Early T30s had bronze pipe (no flanges) for through-hulls as well as gate valves instead of seacocks. Diligent owners will have replaced both by now, but it’s worth checking.

Blistering of all boats was not as common as later in the ’70s and into the ’80s, but there were isolated cases for which one should be on guard.

Tartan’s quality of construction, in the early ’70s, was at least as good as Pearson’s, in some respects better, in others not. It was certainly better built than the Catalina.

The Tartan 30 is a wholesome design with few bad habits. Our 1987 review said, “The Tartan 30 sails well. In a breeze to windward—perhaps the best test of any boat—she is at her best: comfortable, stable, reasonably handy, and modestly dry. Off the wind, she is more steerable than a host of successors with free-standing spade rudders and dagger-thin keels. Only on a broad reach with biggish following seas can her weather helm be tough to handle. Under such conditions, good sail control hardware—vang, traveler, reefing, adjustable backstay, etc.—is important.”

The skeg helps provide good directional stability or tracking, and the narrow sheeting angles (due to inboard genoa tracks) contribute to narrow tacking angles. The largest T30 PHRF fleet in the U.S., on Lake Erie (20 boats), races with a handicap of 168, though most of the other fleets, including the 18-boat fleet on the Chesapeake Bay, rate higher, around 177. So it and the Pearson 30 are very similar in boat speed, though the Pearson has the edge in light air, where the Tartan’s shorter waterline is a disadvantage.

Two interior plans were offered, one with an aft galley, the other with a midship galley, the latter with two quarterberths, the former with a single quarterberth to port and a settee amidships to starboard, where the galley is in the midship model. With either, there are simply too many berths. The aft galley seems preferable mainly because of the two opposing settees in the saloon.

One reason why five berths in a 30-footer is at least one too many is that berth length is diminished; this is particularly evident in the V-berth. Another reason is that quarterberths subtract from available stowage space; instead of stowing sails in cockpit seat lockers, on this boat they end up in a quarterberth.

The midship galley is, of course, more spacious than the aft galley, but neither has a stove/oven combo. Owners note that when the boat is heeled, the sink can fill and slosh water onto the sole.

The cockpit is of average size and would be more comfortable if the wood coamings weren’t so low.

Beyond the usual issues afflicting old boats, like bedding failing on deck hardware, the Tartan 30 has few peculiarities of construction. A number of owners have installed tie rods between the lower portion of the mast in the cabin, and the underside of the deck, to prevent deflection when the rig is heavily tensioned. Check tabbing of the main bulkhead. Also check the starboard chainplate and its attachment to the bulkhead, which reportedly isn’t as stiff as the port side bulkhead; water migration down a chainplate and into a wood bulkhead is a serious problem. Other issues noted online include inadequate insulation of the ice box, and an engine exhaust system prone to back-siphoning.

Tartans enjoy very active owners groups, especially in the Chesapeake Bay area. T30 owners’ websites have much useful information on troubleshooting and upgrading.

The Tartan 30 is probably the classiest boat of the three finalists. Part of the reason is that Sparkman & Stephens is one of the world’s great yacht design firms, and the work they did for Tartan was very good, with handsome, classic lines. And Tartan construction was above average. Online asking prices start at just under $10,000 and run up to around $23,000, with an average of about $17,000.

The family-friendly Catalina 30 comes with the largest fan club.

More than 6,500 Catalina 30s have been built since the boat was introduced in 1974, which must be some kind of record. Its design was continually upgraded over the years, but the first model, the Mark I, was in production through the same period as the Pearson 30 and Tartan 30. The Mark II came along in 1986. Owner Frank Butler has built more than 70,000 boats since he founded the company in 1970, so he must be doing something right. In 2001, the Catalina 30 was inducted into the American Sailboat Hall of Fame.

Butler drew most of the early designs himself, though he has no formal training in naval architecture or yacht design. He was a machinist by trade, and smart. His first design was the Coronado 25, which he’d asked Sparkman & Stephens to design, but they told him it would take two years and they’d first have to check his finances. So he designed the boat himself, with a fiberglass pan interior, which he believes was an industry first (Henri Amel was doing something similar in France.)

The Catalina is three years newer than the Pearson 30 and Tartan 30, and was not intended as a racer, which explains its wider beam and heavier displacement. Like most Catalinas, the 30 is a family boat, best suited to coastal cruising.

Here’s what we said about the design in our Nov. 15, 1980 review: “The boat has a swept-back, fairly high-aspect-ratio keel of the type made popular by IOR racing boats in the early 1970s. The high aspect ratio spade rudder is faired into the underbody with a small skeg. The boat is conventionally modern in appearance. She is moderately high-sided, with a fairly straight sheer and short ends. The cabin trunk tapers slightly in profile, and is slightly sheered to complement the sheer of the hull. When coupled with the tapered cabin windows—a Catalina trademark—this yields a reasonably attractive appearance compared to many modern boats.”

Of course, what was modern in 1980 and what is modern today are two different things. For one, waterline lengths have increased in relation to length overall, which means shorter overhangs, which means bows that are more plumb.

The hull of the Catalina 30 is solid fiberglass; there is no balsa, no foam, which makes for a heavier boat, but also one that isn’t susceptible to potential delamination. The hull-deck joint is a shoebox, in which the wider deck, with downward-facing flanges, fits over the hull. It is then bonded and fastened with self-tapping screws. A wood sheerstrake glassed to the hull adds strength. The joint is then covered with a vinyl rubrail secured in an aluminum extrusion.

Shoal and deep keels were offered, both external lead through-bolted to the hull.

The masthead rig has upper and double-lower shrouds and is deck- stepped. A wood compression post transfers rigging loads to the keel. A tall rig, for light-air regions, was an option. Check wood spreaders for rot. Early boats had fixed portlights, but these can be upgraded to opening.

Stanchions, double lifelines and double stern and bow pulpits were standard. Stanchions are though-bolted, but backed only by washers, not backing plates of fiberglass or aluminum, which do a better job of transferring loads and preventing cracking of the gelcoat, and possibly the deck laminate, in way of the stanchion bases.

Like Tartan, early models had through-hulls made up of bronze pipe. Gate valves were standard and must be replaced with bronze positive-action seacocks.

The Catalina 30’s generous beam (for its day anyway) gives it good initial or form stability. And coupled with a conservative sail plan, the boat is stiff, much more so than the Pearson 30. The downside of such beamy hull forms is the tendency to develop weather helm when heeled; so it, like many other modern boats, is best when sailed relatively level.

The smallish sailplan also means that performance in light air is not particularly sparkling. Our 1980 review said, “To get good performance in light air the boat will either have to be ordered with the taller rig, or very large headsails must be carried. If headsails larger than a 150% genoa are carried with the normal rig, turning blocks will have to be added aft in order to get a proper lead to the headsail sheet winches.”

The biggest Catalina 30 PHRF fleets, both in California, rate 180 and 192 respectively; the Pearson 30 is 174 and the Tartan 30 177.

A gasoline Atomic 4 engine was standard; a small, underpowered diesel was optional. Look for a boat that’s been repowered with a newer engine like the Yanmar 3GM30F.

Interior “furniture,” such as berths and galley, are formed by an interior fiberglass pan or module dropped into the hull prior to the deck going on. A fiberglass headliner covers the underside of the deck. These make for an easily cleaned interior, and one that looka nicely finished (albeit like a refrigerator). Such liners do, however, restrict access to parts of the hull and deck, make customizing difficult, and are not as good thermal and acoustic insulators as wood. The bulkheads are teak-faced plywood.

Again, owing to its beam, the Catalina 30’s interior is more spacious than the Tartan 30’s or Pearson 30’s. The V-berth is comfortable, followed aft by the head and hanging lockers; a shower was optional. The engine is located very near the center of the boat, under the short leg of the L-shaped portside settee. Access is very good. There’s a U-shaped galley with alcohol stove/oven to port, and a quarterberth and chart table to starboard. But if you thought the Tartan 30 has too many berths, check this: The Catalina 30 supposedly sleeps seven! Two in the V-berth, two in the convertible portside dinette, one on the starboard settee, and two squished into the “double” quarter-berth.

The interior is spacious and wellplanned, but finish quality is only average.

The Catalina 30 is a pretty straightforward boat in terms of both design and construction. No big surprises.

Several potential issues mentioned recently on owner forums: corroded wiring harness between engine and control panel, poor rudder design (corrected with new design in December 1978), wear of rudderstock tube, chainplate attachment to bulkheads, gate valves on pipe through-hulls, and hollows in the lead keel.

A positive with any Catalina is that the company is still in business and able to offer customer support.

Catalina Yachts has been one of the country’s most successful builders because it offers a lot of boat for the money. If construction quality is only average, one must ask, “Do I need more?” Generally, what’s lacking is not structural integrity, but details, like more drawers with dovetail joints and hardwood sides. There’s lots of room in the Catalina 30, and there are hundreds on the used boat market, so you can find a deal. Because the Catalina is a somewhat newer boat than the Pearson 30 and Tartan 30, its prices run higher. Though fixer-uppers can be found, most run between $16,000 and $29,000, with an average of about $22,000.

An examination of 30-footers from the 1970s seems like a good place to begin our comparison of used boats, and the reasons are several: First, though boats 30-plus years old admittedly are getting a little long in the tooth, many are still around, and those well kept may represent great buys on the used-boat market—between $10,000 and $20,000. Second, the 30-foot size is where full cruising accommodations begin, with stand-up headroom, enclosed head, berths for four or five, inboard auxiliary engine, and a decent galley with ice box, sink, and stove-oven possible. Sure, you can find these features in some 27- and 28-footers, but the squeeze is telling.

• 30-Footers From The 1970s
• Pearson Web Resources
• Tartan Web Resources
• Catalina 30
• Catalina Web Resources

RELATED ARTICLES MORE FROM AUTHOR

I am looking at a Cooper Seabird 37 mast head sloop, can you point me to any credable reviews on this particular vessel. Any help would be appreciated thank you.

LEAVE A REPLY Cancel reply

Log in to leave a comment

Latest Videos

How To Make Starlink Better On Your Boat | Interview

Catalina 380: What You Should Know | Boat Review

• Privacy Policy
• Do Not Sell My Personal Information
• Online Account Activation
• Privacy Manager

A record on the high seas: Cole Brauer becomes first US woman to sail solo around the world

On Thursday, Cole Brauer made history, becoming the first American woman to sail solo nonstop around the world. The 29-year-old from Long Island, New York, celebrated at the finish line in Spain by drinking champagne from her trophy.

Friends, peers and sailing enthusiasts had been cheering Brauer on since last October, when she embarked on her more than four-month journey.

Race organizer Marco Nannini told USA TODAY he started the Global Solo Challenge to "create a platform for sailors like Cole to showcase her skills and move on to a pro sailor career."

While at sea Brauer kept her more than 400,000 Instagram followers updated − and entertained − with videos from onboard First Light. The trip was extremely challenging and physically exhausting, Brauer said in one video from December.

In the post, she describes how frustrated she felt when she had to fix and replace different parts of the boat.

"I don't want you guys to think I'm like Superwoman or something," Brauer said. "Right now I've been feeling just broken," she added, describing how she had to fix the boat's autopilot system after injuring her torso against the side of the boat's hull amid intense waves.

Who is Cole Brauer?

Brauer is from Long Island and competed for the University of Hawaii sailing team. She went to high school in East Hampton, New York, her university team website says. She was the youngest of more than a dozen sailors, or skippers, in the Global Solo Challenge.

The professional sailor lives in Boothbay, Maine, and during the spring and summer, she can be also found in Newport, Rhode Island, gearing up for races, the Newport Daily News reported last year .

Brauer has sailed on First Light, a 40-foot yacht, for over five years, the outlet reported.

"I always said I wanted to race around the world in this boat," she told the newspaper.

From above and below First Light's deck, Brauer shared aspects of her journey with followers and die-hard sailing fans.

On New Year's Eve, she donned a dress and danced at midnight , and in another post, she showed off how many pull-ups she can do.

As the only woman racing solo, nonstop around the world in the first Global Solo Challenge, Brauer said she was determined to prove there's nothing women and girls cannot accomplish.

"I push so much harder when someone's like, 'No, you can't do that,'" Brauer told NBC Nightly News . "And I'm like, 'OK, watch me.'"

Brauer is the first American woman to sail solo around the world. But Kay Cottee of Australia was the first woman in the world to accomplish the milestone, sailing off from Sydney Harbor in Australia in November 1987 and returning 189 days later.

On her profile page on the Global Solo Challenge website, Brauer said she wanted to send a message to the sailing community that it's time to leave its male-dominated culture in the past. In the profile, Brauer took aim at a lack of equal pay and what she describes as harassment in the sailing industry.

"Just as well as this community has built me up it has broken me and my fellow female teammates down. I am doing this race for them," Brauer said.

Brauer and her spokesperson did not immediately respond to requests for comment.

How long was Cole Brauer at sea?

Brauer was sailing for over four months after departing on Oct. 29.

She finished second in the race, behind a sailor who departed about a month before she did.

The start times differed because that first place boat, Phillipe Delamare's Mowgli, is much slower, Nannini said, explaining the race's staggered start times.

"The format means that if you enter on a slow, small boat you can still win, which makes it much more inclusive than an event where a bigger budget is a definite advantage," he said.

France's Delamare will win first-place prize money of 7,500 euros (about $8,140), Brauer will win 5,000 euros (about $5,430) and the third place finisher will win 2,500 euros (about $2,710), Nannini said.

How dangerous was Cole Brauer's sailing race?

A medical team including a nurse and a physician trained Brauer and sent her on her journey with medicines and medical supplies, in case of any health issues, according to her Instagram account.

Early in the race, Brauer administered her own IV with a saline solution after she became dehydrated, according to one video posted to her social media.

Brauer's most serious health scare happened in early December when she said gnarly ocean conditions caused the boat to jolt, throwing her across the inside of the boat and slamming her hard against a wall.

Her ribs were badly bruised as a result, and her medical team told her to alternate between taking Advil and Tylenol, Brauer said on Instagram.

"Rigging up a sleeping seat belt has been added to my priority list," she said in the post's caption. "I know I'm very lucky that this wasn't a lot worse."

What is the Global Solo Challenge?

The inaugural Global Solo Challenge is a nonstop sailing race in which competitors departed last year from A Coruña, Spain.

The race encompasses nearly 30,000 miles and takes place mostly in the southern hemisphere.

After leaving waters off the coast of Spain, sailors travel south and around Africa's Cape of Good Hope. The race then includes the two other capes that together make up the famous three great capes: Australia's Cape Leeuwin and South America's Cape Horn.

About half of the other competitors dropped out of the race, according to racing data posted online by the Global Solo Challenge.

Delamare finished the race late last month after embarking on his journey in late September 2023, according to race data.

Contributing: Associated Press

Toxic players MC/fear off Boats

Anyone else feel that players who fear bomb or MC you off the boat right before a loadscreen should be suspensed or banned from the game thats just toxic its not even pvp thats deliberate toxicity. the person either has to die and GY res or swim back and or hearth and blizz should really fix this!!! and discipline people who do this!!!

Have you tried not getting mind controlled?

great joke!!!

Your name describes this post perfectly

MC and fearing people off boats is TOXIC since toxic behvaior is against the TOS this should honestly be a suspendable/bannable offense.

PvP happened on a PvP server.

thats not PVP thats Toxic behavior to purposely MC someoen so they jump off the boat right before the load screen isnt PVP pvp is ganking someone on the boat

Its not PvP because…because it just isn’t, okay???

No, it’s really funny.

If your gonna gank someone that is PVP but to purposely MC someone to GREIF them is TOXIC behavior kind of like kiting elites to kill people in hardcore was called toxic!!!

there is a differance between griefing and pvp

You’re complaining about something thats been in the game since its inception. Its like me crying that rogues can stun-lock you til death. Get over yourself

Did you know the opposite faction cannot grief you on a PvE server? Because all “griefing” is just another form of PvP.

You rolled on a PvP server, and there are PvP solutions to your PvP problems.

PVP and greifing are not the same MC and fears should not be allowed on boats ganking is pvp but to purposley cause someone to waste time because you think its funny thats GREIFING not PVP

but i love mc’ing people off the boat!

when you play on a pvp server to actualy Fight thats one thing but to purposely cause someone to have to spend 15-20 minutes getting back to the boat that is not PVP that is TOXIC behavior

As you rightfully should

you should be suspsended for this toxic behavior i really hope a GM sees this because this has gotten out of hand

You know there’s counterplay right? Just kick the hard spell cast.

Posted 2024-03-16 10:35

Contact Information:

2020 Tracker Classic XL Loaded Great Price! - $14,000 (Brandenburg)

QR Code Link to This Post

post id: 7727719540

posted: 2024-03-16 10:35

♥ best of [ ? ]

refresh the page.

2020 Tracker Classic XL Loaded Great Price! - boats - by owner -...

2020 Tracker Classic XL with UPGRADES and MODS! added spare tire, drotto boat launch system, rub rail, led deck lights, upgraded 24v trolling motor, 3 deep cycle batteries (2 of them one season old)...

‘World’s biggest fishing contest’: Boats take to Coromandel waters for Kubota Billfish Classic

A fishing competition described by organisers as the world’s largest billfish contest has returned to Whitianga .

Hundreds of boats were on the water for a shotgun start, just after 7am on Thursday.

The Kubota Billfish Classic, hosted by the Mercury Bay Game Fishing Club, was now in its fifth year, and attracted 420 entries, making it the biggest contest of its kind.

The boats took to the waters off Whitianga, with teams competing for a total of $2 million in prizes.

Event organiser Tom Maxwell said he “was in the thick of it” today.

He established the event after becoming frustrated that New Zealand fishing events were “not doing well”.

“I had some ideas on how they should be run; tournaments were not getting a lot of people turning up.”

As a fishing charter captain, Maxwell travelled the world early in his career, competing in several international fishing competitions.

With such a rich prize pool, the stakes are high.

“One of the highlights of the competition for me is the theatre of it all . . . With big prizes on the line, all fishermen are competitive. You can see it on their faces, they want to bring home one of the big prizes for their families.”

This year’s prizes include $350,000 for the heaviest billfish, a share of the jackpot and a $115,000 Kubota U48G excavator for the “last man standing”.

The winners would be announced at an awards ceremony on Saturday, March 16, at the waterfront.

The Kubota Billfish Classic has grown from a small community event into what organisers believe is the largest billfish tournament globally - based on the number of boats taking part.

Governed by ethical fishing practices, the contest prides itself on sustainability, with one of the main categories being “tag and release”. What was caught is identified and earmarked for scientific research before being released back into the wild.

Stay up to date with the Waikato Herald

Get the latest Waikato headlines straight to your inbox Monday to Saturday. Register for free today - click here and choose Local News.

UFI approval for Moscow Boat Show

• Inspiration

Related News

Popular news this week, popular news this month, latest news.

• Yacht Charter & Superyacht News >

Written by Zuzana Bednarova

September 17 was marked by meeting of the UFI Executive Committee. During the event, the Committe approved the admission of Crocus Expo IEC as a full member of UFI in categories of “Exhibition Organizers” and “Exhibition Centres. Moscow Boat Show has been granted the status of “UFI Approved Event”.

Moscow Boat Show

UFI, The Global Association of the Exhibition Industry is the association of trade show organizers, fairground owners, national and international associations of the exhibition industry, and its partners. As of 2012, it has 608 members in 224 cities from 86 countries covering 6 continents. The association members are responsible for the management and operation of over 4 500 profile events. The association represents more than 1 000 000 of exhibitors and more than 150 000 000 visitors.

The Crocus Expo Exhibition Centre is a listed member of the International Association of Congress Centres (AIPC), the Russian Union of Exhibitions and Fairs, the Guild of Exhibition and Fair Operators by the Moscow Chamber of Commerce and Industry. Donald Tramp fund has awarded Crocus Expo IEC Diamond Excellence Award.

Crocus Expo IEC is an ideal venue for running of large international and national exhibitions of different profile including congress events, conferences and scientific symposiums.About 50% of all exhibition events of Moscow take place in Crocus Expo and average exposition space load comprises 85%.

Moscow Boat Show provides the perfect platform from which to preview new products, evaluate market trends, and establish long-lasting and commercially profitable partnerships. Despite the dynamic changes taking place in Russia and the rapid growth of the yachting sector, the show continues to complement and reflect the industry’s demand and is a promotional opportunity not to be missed!

The exposition space will increase up to 45 000 sq m in 2013. More than 350 Russian and foreign companies will participate in the show. The scale of the project confirms confident positions of its positive development.

Moscow Boat Show is the largest project in Russia presenting all the best in the world of yachting. The exhibition annually shows high level of attendance and has already proved as significant and noteworthy event in the world of yachts and boats.

Please contact CharterWorld - the luxury yacht charter specialist - for more on superyacht news item "UFI approval for Moscow Boat Show".

• Charity & Fund Raising
• CharterWorld News
• Classic Yachts
• Coronavirus
• Cruise Ship
• Ecological Yachts
• Expedition Yachts
• Expert Broker Advice
• Feature Superyachts
• Interior Design
• Legal & VAT Yacht Issues
• Luxury Catamarans
• Luxury Gulet
• Luxury Phinisi
• Luxury Trimarans
• Luxury Yacht Design
• Luxury Yachts
• Marinas & Harbours
• Marine Ecology
• Marine Electronics
• Marine Equipment
• Mega Yachts
• Modern Yachts
• Motor Yachts
• New Launch Yachts
• New To Charter
• Open Style Sports Yachts
• Private Jets
• Sailing Yachts
• Social Media
• Sports Yachts
• Superyacht Crew
• Superyacht Photographers
• Superyacht Products & Supplies
• Superyacht Refits
• Superyacht Reviews
• Superyachts
• Uncategorized
• Yacht Builders
• Yacht Charter
• Yacht Charter Destinations
• Yacht Charter Picks
• Yacht Charter Specials
• Yacht Delivered to Owner
• Yacht Designers
• Yacht Events & Boat Shows
• Yacht Fashion
• Yacht Industry News
• Yacht Photos
• Yacht Racing
• Yacht Racing & Regattas
• Yacht Safety Equipment
• Yacht Support Vessels
• Yacht Tenders
• Yacht Videos
• Yachting Associations
• Yachting Awards
• Yachting Business
• Yachts For Charter
• Yachts For Sale

Quick Enquiry

Superyacht news:.

Email Your Yachting News to: news @ charterworld.com

Luxury Yachts At Events

The Caribbean

The Mediterranean

Ferretti Group announces its presence at Moscow Boat Show 2013

Dates for the 6th International exhibition of boats and yachts Moscow Boat Show 2013 revealed

VIP Mega-Yacht Destination Flisvos Marina to participate in Moscow Boat Show 2013

Official Opening of Moscow Boat Show 2013 on March 12

39m luxury yacht EVOLUTION for charter on Australia’s east coast

Charter Special on board 36m luxury yacht CALYPSO I from Italy to Greece

Croatian charter yacht LA PERLA offering 10% discount on exclusive vacations in the Adriatic

Charter a yacht during the Monaco Historic and F1 Grand Prix festivals and soak up the atmosphere from on deck

Westport announce the first hull of their 36m W117 range is nearing completion

Superyacht LAUNCHPAD previously Feadship 1010 delivered

65m Feadship superyacht PROMISE.D delivered

Discover our Top 10 brand new yachts available for charter worldwide this year

Florida charter yacht REAL SUMMERTIME offering 10% discount

Discover summer in New England aboard a luxury charter yacht: Escape to this beautiful northeast corner of the USA

Looking ahead to the 2024 MYBA Charter Show in Genoa

Last minute yacht charter deals in the Bahamas

49m sailing yacht ANIMA MARIS is offering discounted rates for the remaining summer weeks in Croatia