sailboat with three sails

The Different Types Of Sails And When To Use Them – Complete Guide

sailboat with three sails

Sail forms an integral part of a sailboat. When you sail on the open water and observe other boats (in various sizes), you’d have noticed how each boat type has a specific model of sail. If you’re a beginner in boating, you must know that there are a ton of different sails and they each have their own purpose. 

As a general setup, sailboats will use three common sails, including headsail, mainsail, and specialty sail. Due to the varying wind conditions and the model of the sailboat, there are many types of sails including jib, genoa, trysail, storm jib, code zero, gennaker, and spinnaker. 

While that sounds like too many models of sails, you can easily differentiate between them and choose the ideal model based on your purpose. This article guides you on this aspect. Let’s begin!

Different Types of Sails & When To Use Them

1. mainsail.

Mainsail is by far the most widely spotted sail model, and it’s usually fixed to the boom and fitted behind the mast. This offers the highest mileage to your sailboat, thereby maximizing speed and performance. 

You can use a mainsail if:

  • You’re concerned about the performance
  • You need to go faster and utilize all wind power 
  • You need to steer your boat irrespective of the wind’s status
  • You’ve a large boat and can offer adequate space to this sail. 

This mainsail displays a wide surface area to make the most out of the available wind condition. As a result, you can steer your boat quite easily. However, the downside is its size. It is very large and hard to store if you need to take it down for some reason.

Check out my other article all about maintaing sails!

2. Headsail

Similar to a mainsail, it’s very easy to spot a head sail. Just look at the bow of the boat and see if there is a sail. If you see one then yes that’s a headsail. Also called a jib or genoa, a headsail is smaller in size compared to a mainsail and attaches in front of the mast to the forestay. The Foresail will not have a boom for the clew of the sail to attach to. The clew will be attached to the foresails sheet. It can be used without the mainsail in certain conditions but for the most part the two sails are used together. The foresail is always forward of the main.

The headsail comes in many different forms such as a jib, genoa, spinnaker or storm jib. The most common headsail is a jib or genoa.

You can use a headsail if:

  • Your sailboat is set up for it.
  • You don’t want to use the mainsail at this time.
  • Your mainsail is not usable.  

The biggest advantage of a headsail is the option to protect yourself even if the wind turns unpredictable or wild. This all depends on the type of headsail you are using.

So, what are the different types of headsails? Let’s take a look! 

As more boaters chose to use a headsail for their boats, the jib was introduced as one of its forms. The Jib is a form of headsail that is attached to a shackle present on the deck’s front region. 

The Jib is a sail that does not go past the mast when it is raised and in use. If it goes past the mast then you probably have a genoa.

You can use a jib if:

  • You are out for a normal day of sailing in moderate wind speeds
  • You have a roller furling. Which is a sail that wraps up around itself.

Some weather conditions can make maneuvering harder or tighter than usual. As a result, it’s essential to use a jib in such cases. It functions well with boats containing a roller furling as the jib handles different positions and tackles the movement of the boat at ease. 

2.2 Genoa 

Just when you’ve got acquainted with the jib, genoa comes into the picture as a larger version of the jib. If you’re boating along a coastal region, the genoa sail is the one widely used and is attached to the front area of the deck as well.

Here’s a quick trick to find out if a boat has a genoa sail. This genoa is usually larger than a Jib. This means that the genoa effortlessly overlaps and extends itself beyond the mast, thereby covering the mainsail as well. 

You should use a genoa sail if:

  • You’re planning to sail in minimum wind conditions. Less wind means you need more sail.
  • You find the wind to originate from the rear area. 
  • You own a large boat. Remember that genoa can partially or completely cover the mainsail too. Larger sails for larger boats!

While it’s great for sailing in regular conditions, there are downsides associated with it. A genoa can put you in a dangerous situation if you are sailing in high wind conditions and don’t have the ability to furl in the sail. Furling in the sail will reduce the area of the sail and catch less wind.

Genoas do come in many sizes as well such as 110% or 120%.

The next section of the sail list are ones that aren’t necessary but can be helpful in certain situations. Let’s look at specialty sails!

3. Specialty Sail

While headsails and mainsails are quite commonly used, there are also specialty sails in the market to address specific requirements. Some of the widely seen specialty sails are spinnakers, storm jibs, and code zeros. 

3.1 Spinnakers

Spinnaker is a sail dedicated to downwind and is quite large. Think of a beautifully covered parachute.

It’s easy to spot spinnakers as they resemble kites or parachutes. However, it crosses the bow of the boat and isn’t attached to the forestay.

Unlike the genoa sail that covers the mast, a spinnaker fails to do so. The advantage of a spinnaker is the surface area. When the wind is light, the spinnaker can catch a lot more wind giving you more speed. The Spinnaker is usually fixed to three points – pole, halyard, and sheet.

You should use a spinnaker if:

  • You have minimal wind on a run. 
  • You are trying to harness as much wind power as you can.

While it has a wide surface area, the downside is its inability to steer the boat during strong wind conditions. It can even put the passengers at risk when the wind is at high speeds. 

Make sure you have experience before trying out the spinnaker.

3.2 Storm Jibs

Storm jib is another type of specialty sail meant exclusively for rough weather. It’s a tiny, triangular structure that helps during offshore racing or cruising. Just think of it as a smaller jib.

You should use a storm jib if:

  • You’re going to sail in heavy weather conditions. 
  • You anticipate high wind speeds.
  • You’re going to be in an offshore race and they are an approved sail type.

Note: In the case of an offshore racing requirement, it’s critical to take prior permission from the regulatory authority for using a storm jib. 

3.3 Code Zeros

Code zero is another updated version of a spinnaker that’s meant to be a combination of genoa and gennaker sails. It resembles the look of a genoa but is a lot bigger. 

You should use a code zero if:

  • You’re looking for an overlapping flying headsail. 
  • You’re sailing only in light air conditions.
  • You’re looking for an alternative to a Genoa. 

Having said that, a code zero or a screecher does the job of a genoa with better efficiencies. 

3.4 Trysail  

Trysail is another type of specialty sail that’s tiny, triangular, and can be fixed right above a gooseneck on the sailboat. 

The Trysail is less known in the market as most boaters go ahead with common mainsails and headsails. It’s essential to acknowledge trysail as a front-and-aft mainsail model. It offers excellent performance and contains a permanent pennant in it. 

You should use a trysail if:

  • You’re sailing in heavy weather conditions. 
  • You’re looking for a storm replacement. 
  • You are experienced with using them.

The quadrilateral sail in a trysail is usually turned and bent to a mast, and this helps in heading the vessel during windy conditions. 

3.5 Gennakers

If you’ve been able to spot genoa and spinnaker in the past, identifying a gennaker is incredibly easy. A gennaker is a hybrid sail form that is small, slow, and requires no pole attached to the mast. 

You should use a gennaker if:

  • You’re looking for a smaller version of a spinnaker. 
  • You’ve no space to fix a pole to the mast. 
  • You require the sail to be easily manageable. 
  • You’re sailing in a region requiring minimum downwind levels. 

Choosing a hybrid sail has a lot of benefits as it combines the usefulness of 2 sail models. However, being aware of their cons is critical to planning a safe sail.

As you begin using these sails, you can also look for better customizations. There are drifters, wind seekers, and other jib types that are meant to handle different wind conditions. 

How Many Sails On A Sailboat ?

In general, a sailboat contains two sails. Two sails is the typical setup for the best performance of the boat during different wind conditions. It’s essential to pick your two sails based on your sailing plan.

Why Are There Two Sails On A Sailboat?

A sailboat uses two sails because the wind left over by the first sail is easily caught by the second sail. This helps in steering the sailboat to a better extent and gives the sailboat more power.

Final Thoughts

Sails are one of the major assets of a sailboat. From managing wind to maximizing the performance and longevity of a sailboat, the type of sails you use, plays a huge role. From the various sail types listed in this article, you can choose the best model that fits your sailing routine. Just make sure to remember to check and make sure they are the correct size for your vessel.

Make sure to plan ahead and have the right sails for your sailing weekend. Cheers!

Boatlifehq owner and author/editor of this article.

Recent Posts

Sailboat Racing - Rules & Regulations Explained

Sailboat racing, a blend of skill, strategy, and adherence to intricate rules and regulations, offers a thrilling and intellectually stimulating experience on the water. Navigating through the...

What is the best sailboat to live on? Complete Guide

Embarking on the journey of living aboard a sailboat requires careful consideration of your budget, desired amenities, and storage options. This guide offers a concise, step-by-step approach to...

No products in the cart.

Sailing Ellidah is supported by our readers. Buying through our links may earn us an affiliate commission at no extra cost to you.

A Full Guide to The Jib Sail And How To Use It

Most cruising boats today have a sail plan consisting of at least three sails: A mainsail, a headsail, and a light-wind sail.

The Jib sail (along with its sister, the Genoa) is one of the most widely used headsails on modern sailboats in combination with a larger mainsail. It is very versatile and easy to use in different configurations throughout most weather conditions. 

In this article, I want to explain the Jib in detail and talk a bit about how it works and how we rig and trim it to get the most performance out of the boat. I’ll also show you each part of the sail and its materials before explaining how it differs from other headsails like the Genoa .

Finally, I’ll finish with some tips on maintaining the sail properly to make sure it last as long as possible.

Well, shall we get started?

What is a Jib sail, and what do we use it for?

The Jib is a triangular sail that does not overlap the mainsail. It is typically between 100% and 115% of the foretriangle size and is commonly seen on modern vessels with fractional rigs.

The foretriangle is the triangular area formed by the mast, deck, and forestay. Learn more terms here .

Like other headsails, the Jib is usually rigged on a furling system attached to the forestay , making it easy to operate. The Jib can also be rigged with a self-tacking system, making upwind sailing easy for you, whether you want to cruise solo or with your friends.

How the Jib works on a sailboat

The Jib provides a sail area forward of the mast, allowing the boat to be steered and balanced effectively.

The curved shape of the sail creates a pressure differential. The outer, more convex side (leeward side) has a lower pressure than the inner, concave side (windward side). This pressure differential generates lift, which translates into forward propulsion, much like how an airplane wing produces lift. 

How to rig a Jib

You can rig the Jib on either a furling system or directly to the forestay. Most modern sailing boats are equipped with a furling system, which is a long sleeve that runs from the top of the mast down to the bow and attaches to a drum on the bottom and a swivel on the top. 

Take a closer look at this step-by-step process on how to rig the Jib to sail onto a furling system:

  • Feed the Jib’s luff into the track on the furler’s sleeve with the top of the sail first and connect the head ring on the sail to the chackle on the swivel.
  • Attach the Jib halyard to the swivel and hoist the sail up. 
  • When the sail is hoisted almost all the way to the top, you attach the sail’s tack to a shackle on the top of the drum. 
  • Put the halyard on a winch and winch it tight.
  • Now you have to manually roll up the sail around the forestay and tie on the two sheets to the clew of the sail.
  • Lead the two sheets on each side of the vessel’s side decks through the sheet cars, turn blocks, and back to the winches.
  • Now that the sail is furled away, we need to tie the furling line onto the drum. You have to figure out how the furling line attaches, as it differs from system to system.
  • Once the furler line is attached to the drum, ensure that it can wrap itself up freely.
  • Pull the sail back out using one of your sheets and monitor that the furling line wraps on nicely.
  • Leed the furling line through the blocks and funnels, through the jammer , and leave it next to the winch.
  • Furl the sail away again using the furling line and ensure that the sheets run freely as you monitor your sail getting wrapped nicely around the forestay.
  • Secure the furler line jammer and tidy up your two sheets. Make sure to secure the sheets around the winches.

So, you see now why most boats use furling systems? It is easy! Many larger sailboats even have electrical furlers, removing the need for the furling line.

How to use, reef, and trim a Jib

To use the Jib, you wrap the furler line around the winch, open the jammer, and pull on either of the sheets, depending on which tack you are sailing on. You should hold on to the furler line to prevent the sail from unfurling itself uncontrollably, especially in strong winds. Trying to catch it if it starts running can injure your hands, so be careful! I’m speaking from experience here; burned hands are “No bueno.”

You can now unfurl the entire sail or a part of it. Once the full sail, or the amount you desire, is out, adjust your car position and tighten the sheet.

How to reef a jib

You do the opposite as the above to reef the sail or furl it back in. 

Ease off the working sheet, but keep it on the winch. At the same time, pull in on the furler line either manually or on the winch. Remember to move the cars forward and re-tighten the sheet if you are reefing away only a part of the Jib. 

How to trim a jib

Adjusting the sheet cars and sheet tension is important to obtain an optimal sail shape in the Jib. Finding this balance is what we call  sail trim . I’m not going too deep into sail trim here, as it is a topic for itself, which will require a separate article,.

But here is a rule of thumb:

You want the leech and foot of the sail to form an even “U” shape on any point of sail . When sailing upwind, you usually move the car aft. When bearing off the wind, you move the car forward.

The goal is to apply even tension on both the foot and the leech. When you reef the sail, you’ll also want to move the car forward to adjust for the reduced sail area. Sailing downwind doesn’t require the same fine-tuning as upwind sailing.

Four tips for sailing upwind:

  • Winch up the jib sheet until the leech stops fluttering and the foot has a nice, even “U” shape. 
  • You must move the sheet car forward if the foot is tight and the leech flutters.
  • Move the sheet cars aft if the leech is tight and the foot flutters .
  • If the wind increases and the boat starts to heel excessively, you can either ease off the sheet or adjust your course more head to wind. 

You should play around and experiment with sail trim, as every boat behaves differently. Trimming sails is an art that takes time to master. Staysails, Jibs, and Genoas are trimmed the same way, but the car positions will be different due to their size and shape differences. Once you learn how to trim a Jib, you’ll be able to trim any headail and even a storm jib or a spinnaker.

Sailing with more than one Jib

Sailing with multiple jib sails can be beneficial on longer downwind passages. Most furling systems have two tracks, allowing you to have two Jibs on the same furler, making this setup easy to reef. You can do the same with Yankees and Genoas, depending on what you have available in your boat.

Some sailboats have two or more forestays, allowing them to have two individually furled Jibs. This is usually called a cutter rig. Most Cutter rigs, however, use a Staysail on the inner forestay and a Yankee sail on the outer, but this versatile rig allows you to experiment with many setups.

Exploring the different parts of the Jib

Head: The head is the top corner of the Jib. It typically has a ring in the top corner that attaches to the Jib halyard or the top swivel for furling systems.

Leech: The leech is the aft part of the rib, located between the clew and head. 

Luff : A Jib’s luff is the front part between the tack and head. Jibs can be equipped with  luff foam  to help maintain their shape when partially reefed on a furler.

Clew : The clew is the aft lower corner of the jib where the sheets are attached.

Tack : The tack is the lower, forward corner of the Jib. The tack is connected to a furler drum on the forestay on most sailboats. Vessels using traditional hank-on headsails connect the tack to a fixed point on the bow.

Foot : The foot of the Jib is the bottom portion of the sail between the clew and the tack.

Telltales: Telltales are small ropes, bands, or flags attached to the front of the Jib’s leech to help us understand how the wind affects the sail and allow us to fine-tune the trim for optimal performance.

Commonly used materials for the Jib

The most common material used for Jib’s today is Dacron woven polyester, followed by CDX laminate due to the relatively affordable price. Continuing up the range, we find woven hybrids like Hydranet, Vectran, Radian, and other brands.

Then, we have advanced laminates with Aramids, carbon, kevlar, and more exotic materials. At the top of the spectrum, we find the latest technology in DFi membrane sails like Elvstrøms EPEX or North Sails 3Di, which comes at a premium price tag.

These days, however, modern technology has given us warp-oriented woven cloth, which is becoming a popular option due to its increased ability to keep shape over time without stretching as much as traditionally cross-cut dacron sails. ProRadial, made by Contender and Dimension Polyant, is a good example. North Sails has an excellent article that goes in-depth on sail materials.

The difference between a Jib and a Genoa

The difference between a Jib and a Genoa is that the Jib is a headsail that does not overlap the mainsail, while the larger Genoa is designed to overlap the mainsail. While the smaller Jib is excellent at pointing upwind and easier to handle, the larger Genoa excels on any points of sail with the wind behind the beam.

Genoas are usually larger than 115% of the  foretriangle , with sizes ranging from 120% to 150%. They are often used on yachts with masthead rigs and smaller mainsails but are also common on fractional rigs.

How to Maintain and Care for Your Jib Sail

Good maintenance and care of your Jib will ensure optimal performance and minimize wear and tear. Check out these tips on how to maintain and protect your Jib:

  • Rinse the Jib with fresh water regularly and leave it up to dry before packing it away. Proper drying will prevent moisture and mildew.
  • Give the sail a service once a year. Check for any damaged seams and repair them if necessary. If there are any chafing marks, reinforce the sail with patches on chafe points and add shafe guards to the equipment it rubs against.
  • Protect the sail from UV rays by keeping it packed away when not in use. A furling Jib can be protected by adding a UV strip to the foot and leech.

I also wrote an article on how to make sails last longer .

Final Words

We have talked a lot about the Jib’s features and how it works in this article. I recommend you to head out and set sail to get some experience and play around with your sails. If you don’t have a boat, chat around in your nearest marina; someone will for sure bring you along for a sail. I know I would.

Remember to experiment with sail trim and practice tacking and maneuvering the vessel with the sail on both the port and starboard sides.

If you still have questions, check out the frequently asked questions section below or drop a comment in the comment field. I’ll be more than happy to answer any of your questions!

PS: Explore more sails in my easy guide to different types of sails here .

FAQ – The Jib Sail Explained

When to use a jib sail.

The Jib is an excellent sail for most conditions, especially when cruising at any angle towards the wind. The Jib has a benefit over the Genoa in strong winds as it is easier to handle, and its smaller size makes it more effective than a reefed Genoa when sailing to windward. 

Can you sail with just the Jib?

It is possible to sail with just the Jib alone, and it works exceptionally well downwind on deep angles where the mainsail usually would have blocked off the wind. 

Can you sail upwind with just the jib?

It is possible to sail upwind with just the Jib, but most sailboat owners prefer to balance their boats by flying their mainsail combined with theiJib when sailing to windward.

What is the difference between a Genoa and a Jib?

The Genoa is different from a Jib sail as it is larger and overlaps the mainsail, whereas the Jib is smaller and does not overlap the mainsail.

Sharing is caring!

Skipper, Electrician and ROV Pilot

Robin is the founder and owner of Sailing Ellidah and has been living on his sailboat since 2019. He is currently on a journey to sail around the world and is passionate about writing his story and helpful content to inspire others who share his interest in sailing.

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

life-of-sailing-logo

Sail Rigs And Types - The Only Guide You Need

Sail Rigs And Types - The Only Guide You Need | Life of Sailing

Last Updated by

Daniel Wade

June 15, 2022

A well-designed sailboat is a thing of pure beauty. Whether you're a proud owner of one, a guest on one, or a shore-side admirer, you'll fall in love with the gliding sails, the excitement of a race, and the eco-friendly nature of these sophisticated yet magnificent vessels. With good sails, great design, and regular maintenance, sails and rigs are an important part of a sailboat.

If you’re thinking about going sailing, one of the first things you have to understand is the variety of modern sail plans. Unlike old sailboats, modern sailboats don't need huge, overlapping headsails and multiple masts just to get moving. In the past, when sailboats were heavy, keels were long, the only way to get the boat moving was with a massive relative sail area. You needed as much square footage as you could just to get your sailboat moving. But with the invention of fiberglass hulls, aluminum or composite masts, high-tensile but low diameter lines and stats, and more efficient sails, sailboats no longer need to plan for such large sail plans.. Still, there are various rig styles, from the common sloop, to the comfortable cat-rig, to the dual masted ketch and schooner, there are various sail types and rigs to choose from. The most important thing is to know the different types of sails and rigs and how they can make your sailing even more enjoyable.

There are different types of sails and rigs. Most sailboats have one mainsail and one headsail. The mainsail is generally fore-and-aft rigged and is triangular shaped. Various conditions and courses require adjustments to the sails on the boats, and, other than the mainsail, most boats can switch out their secondary sail depending on various conditions.. Do you want to sail upwind or go downwind? You cannot hoist just any sail and use it. It's, therefore, of great importance to understand how and when to use each sail type.

In this in-depth article, we'll look at various sail types and rigs, and how to use them to make your sailing more enjoyable.

Table of contents

Different Sail Types

It is perhaps worth noting that a sailboat is only as good as its sails. The very heart of sailing comes in capturing the wind using artfully trimmed sails and turning that into motion. . Ask any good sailor and he'll tell you that knowing how and when to trim the sails efficiently will not only improve the overall performance of your boat but will elevate your sailing experience. In short, sails are the driving force of sailboats.

As such, it's only natural that you should know the different types of sails and how they work. Let's first highlight different sail types before going into the details.

  • Jib - triangular staysail
  • Spinnaker - huge balloon-shaped downwind sail for light airs
  • Genoa - huge jib that overlaps the mainsail
  • Gennaker - a combination of a spinnaker and genoa
  • Code zero - reaching genoa for light air 
  • Windseeker - tall, narrow, high-clewed, and lightweight jib
  • Drifter - versatile light air genoa made from particularly lightweight cloth
  • Storm jib - a smaller jib meant for stormy conditions
  • Trysail - This is a smaller front-and-aft sail for heavy weather

The mainsail is the principal sail on a boat. It's generally set aft of the mainmast. Working together with the jib, the mainsail is designed to create the lift that drives the sailboat windward. That being said, the mainsail is a very powerful component that must always be kept under control.

As the largest sail, and the geometric center of effort on the boat, the mainsail is tasked with capturing the bulk of the wind that's required to propel the sailboat. The foot, the term for the bottom of any sail, secures to the boom, which allows you to trim the sail to your heading. The luff, the leading edge of the sail, is attached to the mast. An idealized mainsail would be able to swing through trim range of 180°, the full semi-circle aft of the mast, though in reality, most larger boats don’t support this full range of motion, as a fully eased sail can occasionally be unstable in heavy breeze.

. As fully controlling the shape of the mainsail is crucial to sailing performance, there are many different basic mainsail configurations. For instance, you can get a full-batten mainsail, a regular mainsail with short battens, or a two-plus-two mainsail with two full-length battens. Hyper-high performance boats have even begun experimenting with winged sails which are essentially trimmable airplane wings! Moreover, there are numerous sail controls that change the shape by pulling at different points on the sail, boom, or mast. Reefing, for instance, allows you to shorten the sail vertically, reducing the amount of sail area when the boat is overpowered.

Features of a Mainsail

Several features will affect how a particular sail works and performs. Some features will, of course, affect the cost of the sail while others may affect its longevity. All in all, it's essential to decide the type of mainsail that's right for you and your sailing application.

Sail Battens, the Roach, and the Leech

The most difficult part of the sail to control, but also the most important, are the areas we refer to as the leech and the roach. The roach is the part of the sail that extends backwards past the shortest line between the clew, at the end of the boom, and the top of the mast. It makes up roughly the back third of the sail. The leech is the trailing edge of the sail, the backmost curve of the roach. Together, these two components control the flow of the air off the back of the sail, which greatly affects the overall sail performance. If the air stalls off the backside of the sail, you will find a great loss in performance. Many sail controls, including the boom vang, backstay, main halyard, and even the cunningham, to name a few, focus on keeping this curve perfect. 

As for parts of the sail itself, battens control the overall horizontal shape of the sail. Battens are typically made from fiberglass or wood and are built into batten pockets. They're meant to offer support and tension to maintain the sail shape Depending on the sail technology you want to use, you may find that full battens, which extend from luff to leech, or short battens, just on the trailing edge, are the way to go. Fully battened sails tend to be more expensive, but also higher performance.

Fully Battened Mainsails

They're generally popular on racing multihulls as they give you a nice solid sail shape which is crucial at high speeds. In cruising sailboats , fully battened mainsails have a few benefits such as:

  • They prevent the mainsail from ragging. This extends the life of the sail, and makes maneuvers and trimming easier for the crew.
  • It provides shape and lift in light-air conditions where short-battened mainsails would collapse.

On the other hand, fully-battened mainsails are often heavier, made out of thicker material, and can chafe against the standing rigging with more force when sailing off the wind.

Short Battens

On the other hand, you can choose a mainsail design that relies mostly on short battens, towards the leech of the sail. This tends to work for lighter cloth sails, as the breeze, the headsail, and the rigging help to shape the sail simply by the tension of the rig and the flow of the wind. The battens on the leech help to preserve the shape of the sail in the crucial area where the air is flowing off the back of the sail, keeping you from stalling out the entire rig.

The only potential downside is that these short battens deal with a little bit of chafe and tension in their pockets, and the sail cloth around these areas ought to be reinforced. If your sails do not have sufficient reinforcement here, or you run into any issues related to batten chafe, a good sail maker should be able to help you extend the life of your sails for much less than the price of a new set.

How to Hoist the Mainsail

Here's how to hoist the mainsail, assuming that it relies on a slab reefing system and lazy jacks and doesn't have an in-mast or in-boom furling system.

  • ‍Maintain enough speed for steeragewhile heading up into the wind
  • Slacken the mainsheet, boom vang, and cunningham
  • Make sure that the lazy jacks do not catch the ends on the battens by pulling the lazy jacks forward.
  • Ensure that the reefing runs are free to run and the proper reefs are set if necessary.
  • Raise the halyard as far as you can depending on pre-set reefs.
  • Tension the halyard to a point where a crease begins to form along the front edge
  • Re-set the lazy jacks
  • Trim the mainsail properly while heading off to your desired course

So what's Right for You?

Your mainsail will depend on how you like sailing your boat and what you expect in terms of convenience and performance. That being said, first consult the options that the boatbuilder or sailmakers suggest for your rig. When choosing among the various options, consider what you want from the sail, how you like to sail, and how much you're willing to spend on the mainsail.

The headsail is principally the front sail in a fore-and-aft rig. They're commonly triangular and are attached to or serve as the boat’s forestay. They include a jib and a genoa. 

A jib is a triangular sail that is set ahead of the foremost sail. For large boats, the roto-furling jib has become a common and convenient way to rig and store the jib. Often working in shifts with spinnakers, jibs are the main type of headsails on modern sailboats. Jibs take advantage of Bournoulli’s Principle to break the incoming breeze for the mainsail, greatly increasing the speed and point of any boat. By breaking the incoming wind and channeling it through what we call the ‘slot,’ the horizontal gap between the leech of the jib and the luff of the mainsail, the jib drastically increases the efficiency of your mainsail. It additionally balances the helm on your rudder by pulling the bow down, as the mainsail tends to pull the stern down. .

The main aim of the jib is to increase the sail area for a given mast size. It improves the aerodynamics of the mainsails so that your sailboat can catch more wind and thereby sail faster, especially in light air

Using Jibs on Modern Sailboats

In the modern contexts, jib’s mainly serve  increase the performance and overall stability of the mainsail. The jib can also reduce the turbulence of the mainsail on the leeward side.

On Traditional Vessels

Traditional vessels such as schooners have about three jibs. The topmast carried a jib topsail, the main foresail is called the jib, while the innermost jib is known as the staysail. The first two were employed almost exclusively by clipper ships.

How to Rig the Jibs

There are three basic ways to rig the jib.

Track Sheets - A relatively modern approach to the self-tacking jib, this entails placing all the trimming hardware on a sliding track forward of the mast. This means that on each tack, the hardware slides from one side of the boat to the other. This alleviates the need to switch sheets and preserves the trim angle on both sides, though it can be finnicky and introduce friction.

Sheet up the Mast - This is a very popular approach and for a good reason. Hoist the jib sheet up the mast high enough to ensure that there's the right tension through the tack. Whether internally or externally, the sheet returnsto the deck and then back to the cockpit just like the rest of the mast baselines. The fact the hardware doesn't move through the tacks is essential in reducing friction.

Sheet Forward - This method revolves around ensuring that the jib sheet stays under constant pressure so that it does not move through the blocks in the tacks. This is possible if the through-deck block is extremely close to the jib tack. Your only challenge will only be to return the sheet to the cockpit. This is, however, quite challenging and can cause significant friction.

Dual Sheeting - The traditional method, especially on smaller dinghies, though it is not self-tacking. This requires a two ended or two separate sheet system, where one sheet runs to a block on starboard, and the other to port. Whenever you tack or gybe, this means you have to switch which sheet is active and which is slack, which is ok for well crewed boats, but a potential issue on under-crewed boats.

Another important headsail, a genoa is essentially a large jib that usually overlaps the mainsail or extends past the mast, especially when viewed from the other side. In the past, a genoa was known as the overlapping jib and is technically used on twin-mast boats and single-mast sloops such as ketches and yawls. A genoa has a large surface area, which is integral in increasing the speed of the vessel both in moderate and light winds.

Genoas are generally characterized by the percentage they cover. In most cases, sail racing classes stipulate the limit of a genoa size. In other words, genoas are usually classified by coverage.

Top-quality genoa trim is of great importance, especially if the wind is forward of the beam. This is because the wind will first pass over the genoa before the mainsail. As such, a wrongly sheeted genoa can erroneously direct the wind over the mainsail,spelling doom to your sailing escapades. While you can perfectly adjust the shape of a genoa using the mast rake, halyard tension, sheet tension, genoa car positioning, and backstay tension, furling and unfurling a genoa can be very challenging, especially in higher winds.

That being said, here are the crucial steps to always keep in mind.

  • Unload and ease the loaded genoa sheet by going to a broad reach
  • Do not use the winch; just pull on the furling line
  • Keep a very small amount of pressure or tension on the loaded genoa sheet
  • Secure the furling line and tighten the genoa sheets
  • Get on the proper point of sail
  • Have the crew help you and release the lazy genoa sheets
  • Maintain a small tension while easing out the furling line
  • Pull-on a loaded genoa sheet
  • Close or cleat off the rope clutch when the genoa is unfurled
  • Trim the genoa

To this end, it's important to note that genoas are popular in some racing classes. This is because they only categorize genoas based on the fore-triangle area covered, which essentially allows a genoa to significantly increase the actual sail area. On the contrary, keep in mind that tacking a genoa is quite a bit harder than a jib, as the overlapping area can get tangled with the mast and shrouds. It's, therefore, important to make sure that the genoa is carefully tended, particularly when tacking.

Downwind Sails

Modern sailboats are a lot easier to maneuver thanks to the fore-and-aft rig. Unfortunately, when sailing downwind they catch less wind, and downwind sails are a great way of reducing this problem. They include the spinnaker and the gennaker.

A spinnaker will, without a doubt, increase your sailing enjoyment. But why are they often buried in the cabin of cruising boats? Well, the first few attempts to rig and set a spinnaker can be difficult without enough help and guidance. Provided a solid background, however, spinnakers are quite straightforward and easy to use and handle with teamwork and enough practice. More importantly, spinnakers can bring a light wind passage to life and can save your engine.

Spinnakers are purposely designed for sailing off the wind; they fill with wind and balloon out in front of your sailboat. Structured with a lightweight fabric such as nylon, the spinnaker is also known as a kite or chute, as they look like parachutes both in structure and appearance. 

A perfectly designed spinnaker should have taut leading edges when filled. This mitigates the risk of lifting and collapsing. A spinnaker should have a smooth curve when filled and devoid of depressions and bubbles that might be caused by the inconsistent stretching of the fabric. The idea here is that anything other than a smooth curve may reduce the lift and thereby reduce performance.

Types of Spinnakers

There are two main types of spinnakers: symmetric spinnakers and asymmetric spinnakers.

Asymmetric Spinnakers

Flown from a spinnaker pole or bowsprit fitted to the bow of the boat, asymmetric spinnakers resemble large jibs and have been around since the 19th century. The concept of asymmetric spinnaker revolves around attaching the tack of the spinnaker at the bow and pulling it around during a gybe.

Asymmetric spinnakers have two sheets just like a jib., These sheets are attached at the clew and never interact directly with the spinnaker pole. This is because the other corner of the spinnaker is fixed to the bowsprit. The asymmetric spinnaker works when you pull in one sheet while releasing the other. This makes it a lot easier to gybe but is less suited to sailing directly downwind. There is the loophole of having the asymmetric spinnaker gybed to the side opposite of the boom, so that the boat is sailing ‘wing-on-wing,’ though this is a more advanced maneuver, generally reserved for certain conditions and tactical racing situations.

On the contrary, the asymmetric spinnaker is perfect for fast planing dinghies. This is because such vessels have speeds that generate apparent wind forward. Because asymmetrics, by nature, prefer to sail shallower downwind angles, this apparent wind at high speeds makes the boat think that it is sailing higher than it really is, allowing you to drive a little lower off the breeze than normal. . In essence, the asymmetric spinnaker is vital if you're looking for easy handling.

Symmetric Spinnakers

Symmetric spinnakers are a classic sail type that has been used for centuries for controlling boats by lines known as a guy and a sheet. The guy, which is a windward line, is attached to the tack of the sail and stabilized by a spinnaker pole. The sheet, which is the leeward line, is attached to the clew of the spinnaker and is essential in controlling the shape of the spinnaker sail.

When set correctly, the leading edges of the symmetric spinnaker should be almost parallel to the wind. This is to ensure that the airflow over the leading edge remains attached. Generally, the spinnaker pole should be at the right angles to the apparent wind and requires a lot of care when packing.

The main disadvantage of this rig is the need to gybe the spinnaker pole whenever you gybe the boat. This is a complicated maneuver, and is one of the most common places for spinnakers to rip or get twisted. If, however, you can master this maneuver, you can sail at almost any angle downwind!

How to Use Spinnaker Effectively

If you decide to include the spinnakers to your sailboat, the sailmaker will want to know the type of boat you have, what kind of sailing you do, and where you sail. As such, the spinnaker that you end up with should be an excellent and all-round sail and should perform effectively off the breeze

The type of boat and where you'll be sailing will hugely influence the weight of your spinnaker cloth. In most cases, cruising spinnakers should be very light, so if you've decided to buy a spinnaker, make sure that it's designed per the type of your sailboat and where you will be sailing. Again, you can choose to go for something lighter and easier to set if you'll be sailing alone or with kids who are too young to help.

Setting up Spinnakers

One of the main reasons why sailors distrust spinnakers is because they don't know how to set them up. That being said, a perfectly working spinnaker starts with how you set it up and this revolves around how you carefully pack it and properly hook it up. You can do this by running the luff tapes and ensuring that the sails are not twisted when packed into the bag. If you are using large spinnakers, the best thing to do is make sure that they're set in stops to prevent the spinnakers from filling up with air before you even hoist them fully.

But even with that, you cannot fully set the spinnaker while sailing upwind. Make sure to bear away and have your pole ready to go as you turn downwind. You should then bear away to a reach before hoisting. Just don't hoist the spinnakers from the bow as this can move the weight of the crew and equipment forward.

Used when sailing downwind, a gennaker is asymmetric sail somewhere between a genoa and a spinnaker. It sets itself apart because it  gennaker is a free-flying asymmetric spinnaker but it is tacked to the bowsprit like the jib.

Let's put it into perspective. Even though the genoa is a great sail for racing and cruising, sailors realized that it was too small to be used in a race or for downwind sail and this is the main reason why the spinnaker was invented. While the spinnakers are large sails that can be used for downwind sail, they are quite difficult to handle especially if you're sailing shorthanded. As such, this is how a gennaker came to be: it gives you the best of both worlds.

Gennakers are stable and easy to fly and will add to your enjoyment and downwind performance.

The Shape of a Gennaker

As we've just noted, the gennaker is asymmetrical. It doesn't attach to the forestay like the genoa but has a permanent fitting from the mast to bow. It is rigged exactly like a spinnaker but its tack is fastened to the bowsprit. This is fundamentally an essential sail if you're looking for something to bridge the gap between a genoa and a spinnaker.

Setting a Gennaker

When cruising, the gennaker is set with the tack line from the bow, a halyard, and a sheet that's led to the aft quarter. Attach the tack to a furling unit and attach it to a fitting on the hull near the very front of the sailboat. You can then attach the halyard that will help in pulling it up to the top of the mast before attaching it to the clew. The halyard can then run back to the winches to make the controlling of the sail shape easier, just like when using the genoa sail.

In essence, a gennaker is a superb sail that will give you the maximum versatility of achieving the best of both a genoa and a spinnaker, especially when sailing downwind. This is particularly of great importance if you're cruising by autopilot or at night.

Light Air Sails

Even though downwind sails can be used as light air sails, not all light air sails can be used for downwind sailing. In other words, there's a level of difference between downwind sails and light air sails. Light air sails include code zero, windseeker, and drifter reacher.

A cross between an asymmetrical spinnaker and a genoa, a code zero is a highly modern sail type that's generally used when sailing close to the wind in light air. Although the initial idea of code zero was to make a larger genoa, it settled on a narrow and flat spinnaker while upholding the shape of a genoa.

Modern boats come with code zero sails that can be used as soon as the sailboat bears off close-hauled even a little bit. It has a nearly straight luff and is designed to be very flat for close reaching. This sail is designed to give your boat extra performance in light winds, especially in boats that do not have overlapping genoas. It also mitigates the problem of loss of power when you are reaching with a non-overlapping headsail. Really, it is closer to a light air jib that sacrifices a little angle for speed.

In many conditions, a code zero sail can go as high as a sailboat with just a jib. By hoisting a code zero, you'll initially have to foot off about 15 degrees to fill it and get the power that you require to heel and move the boat. The boat will not only speed up but will also allow you to put the bow up while also doing the same course as before you set the zero. In essence, code zero can be an efficient way of giving your boat about 30% more speed and this is exactly why it's a vital inventory item in racing sailboats.

When it comes to furling code zero, the best way to do it is through a top-down furling system as this will ensure that you never get a twist in the system.

Generally used when a full size and heavier sail doesn't stay stable or pressurized, a windseeker is a very light sail that's designed for drifting conditions. This is exactly why they're designed with a forgiving cloth to allow them to handle these challenging conditions.

The windseeker should be tacked at the headstay with two sheets on the clew. To help this sail fill in the doldrums, you can heel the boat to whatever the apparent leeward side is and let gravity help you maintain a good sail shape while reaching.The ideal angle of a windseeker should be about 60 degrees.

Though only used in very specific conditions, the windseeker is so good at this one job that it is worth the investment if you plan on a long cruise. Still, you can substitute most off the breeze sails for this in a pinch, with slightly less performance gain, likely with more sacrifices in angle to the breeze. 

Drifter Reacher

Many cruising sailors often get intimidated by the idea of setting and trimming a drifter if it's attached to the rig at only three corners or if it's free-flying. But whether or not a drifter is appropriate for your boat will hugely depend on your boat's rig, as well as other specific details such as your crew's ability to furl and unfurl the drifter and, of course, your intended cruising grounds.

But even with that, the drifter remains a time-honored sail that's handy and very versatile. Unlike other light air sails, the drifter perfectly carries on all points of sails as it allows the boat to sail close-hauled and to tack. It is also very easy to control when it's set and struck. In simpler terms, a drifter is principally a genoa that's built of lightweight fabric such as nylon. Regardless of the material, the drifter is a superb sail if you want to sail off a lee shore without using the genoa.

Generally stronger than other regular sails, stormsails are designed to handle winds of over 45 knots and are great when sailing in stormy conditions. They include a storm jib and a trysail.

If you sail long and far enough, chances are you have or will soon be caught in stormy conditions. Under such conditions, storm jibs can be your insurance and you'll be better off if you have a storm jib that has the following features:

  • Robustly constructed using heavyweight sailcloth
  • Sized suitably for the boat
  • Highly visible even in grey and white seas

That's not all; you should never go out there without a storm jib as this, together with the trysail, is the only sails that will be capable of weathering some of nature's most testing situations.

Storm jibs typically have high clews to give you the flexibility of sheet location. You can raise the sail with a spare halyard until its lead position is closed-hauled in the right position. In essence, storm jib is your insurance policy when out there sailing: you should always have it but always hope that you never have to use it.

Also known as a spencer, a trysail is a small, bright orange, veritably bullet-proof, and triangular sail that's designed to save the boat's mainsail from winds over 45 knots and works in the same way as a storm jib. It is designed to enable you to make progress to windward even in strong and stormy winds.

Trysails generally use the same mast track as the mainsail but you have to introduce the slides into the gate from the head of the trysail.

There are two main types of rigs: the fore-and-aft rig and the square rigg.

Fore-and-aft Rig

This is a sailing rig that chiefly has the sails set along the lines of the keel and not perpendicular to it. It can be divided into three categories: Bermuda rig, Gaff rig, and Lateen rig.

Bermuda Rig - Also known as a Marconi rig, this is the typical configuration of most modern sailboats. It has been used since the 17th century and remains one of the most efficient types of rigs. The rig revolves around setting a triangular sail aft of the mast with the head raised to the top of the mast. The luff should run down the mast and be attached to the entire length.

Gaff Rig - This is the most popular fore-and-aft rig on vessels such as the schooner and barquentine. It revolves around having the sail four-cornered and controlled at its peak. In other words, the head of the mainsail is guided by a gaff.

Lateen Rig - This is a triangular fore-and-aft rig whereby a triangular sail is configured on a long yard that's mounted at a given angle of the mast while running in a fore-and-aft direction. Lateen rig is commonly used in the Indian Ocean and the Mediterranean.

Square Rigged

This is a rig whereby the mainsails are arranged in a horizontal spar so that they're square or vertical to the mast and the keel of the boat. The square rig is highly efficient when sailing downwind and was once very popular with ocean-going sailboats.

Unquestionably, sailing is always pleasurable. Imagine turning off the engine of your boat, hoisting the sails, and filling them with air! This is, without a doubt, a priceless moment that will make your boat keel and jump forward!

But being propelled by the noiseless motion of the wind and against the mighty currents and pounding waves of the seas require that you know various sail types and how to use them not just in propelling your boat but also in ensuring that you enjoy sailing and stay safe. Sails are a gorgeous way of getting forward. They remain the main fascination of sailboats and sea cruising. If anything, sails and boats are inseparable and are your true friends when out there on the water. As such, getting to know different types of sails and how to use them properly is of great importance.

All in all, let's wish you calm seas, fine winds, and a sturdy mast!

Related Articles

I've personally had thousands of questions about sailing and sailboats over the years. As I learn and experience sailing, and the community, I share the answers that work and make sense to me, here on Life of Sailing.

by this author

Learn About Sailboats

Sailboat Parts

Most Recent

What Does "Sailing By The Lee" Mean? | Life of Sailing

What Does "Sailing By The Lee" Mean?

October 3, 2023

The Best Sailing Schools And Programs: Reviews & Ratings | Life of Sailing

The Best Sailing Schools And Programs: Reviews & Ratings

September 26, 2023

Important Legal Info

Lifeofsailing.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon. This site also participates in other affiliate programs and is compensated for referring traffic and business to these companies.

Similar Posts

Affordable Sailboats You Can Build at Home | Life of Sailing

Affordable Sailboats You Can Build at Home

September 13, 2023

Best Small Sailboat Ornaments | Life of Sailing

Best Small Sailboat Ornaments

September 12, 2023

Discover the Magic of Hydrofoil Sailboats | Life of Sailing

Discover the Magic of Hydrofoil Sailboats

December 11, 2023

Popular Posts

Best Liveaboard Catamaran Sailboats | Life of Sailing

Best Liveaboard Catamaran Sailboats

December 28, 2023

Can a Novice Sail Around the World? | Life of Sailing

Can a Novice Sail Around the World?

Elizabeth O'Malley

Best Electric Outboard Motors | Life of Sailing

4 Best Electric Outboard Motors

How Long Did It Take The Vikings To Sail To England? | Life of Sailing

How Long Did It Take The Vikings To Sail To England?

10 Best Sailboat Brands | Life of Sailing

10 Best Sailboat Brands (And Why)

December 20, 2023

7 Best Places To Liveaboard A Sailboat | Life of Sailing

7 Best Places To Liveaboard A Sailboat

Get the best sailing content.

Top Rated Posts

Lifeofsailing.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon. This site also participates in other affiliate programs and is compensated for referring traffic and business to these companies. (866) 342-SAIL

© 2024 Life of Sailing Email: [email protected] Address: 11816 Inwood Rd #3024 Dallas, TX 75244 Disclaimer Privacy Policy

Marine Insight

Types of Sailboats – A Comprehensive Classification

Traditionally, sailboats were made of marine wood and other materials however; modern ones use premium marine lumber products. Sailboats are divided into subclasses, and one such is the catamaran which is made of fiberglass, which makes it more durable and low maintenance.

Sailboats are propelled by wind captured through their sails, masts and rigging lines. Some are equipped with generators, wind makers and other technologies to generate more power, hence providing more speed. They are considered a separate class of vessels independent of motor-powered crafts since their hydrodynamic characteristics differ.

They can vary in occupancy from single-seater crafts for competitions or adventure sailing to recreational vessels spanning hundreds of metres that can host up to thirty individuals. The luxury yachts are ideal to experience sailing in comfort and style. These vessels are known for their remarkable craftsmanship and innovative design.

The most common type of sailboat is the racing sailboat, used in sailing competitions around the world. Several international events intended to raise awareness about sailing allow a wide range of craft types to participate, including catamarans and racer-cruiser.

For most sailing vessels, sail plans are often drawn up before the vessel leaves port. These plans indicate sail positions for various weather conditions.

In this article, we will go through the different types of sailboats and their key features.

Hull-Based Classification Of Sailboats

Sailboats can be classified into three distinct types based on their primary hull type.

These include

  • catamarans, and
  • multi-hull crafts.

Traditionally, monohulls are the most common design for sailboats since they provide storage in addition to a certain level of stability.

However, with the advent of sailing competitions and an increased focus on performance and stability features, there has been a general shift towards catamarans and trimarans.

Monohulls are single-hulled structures, much like conventional vessels , that have a large hull beam (breadth) which provides stability while sailing. The advantage of having a single large hull is that the longer beam allows for improved onboard systems and amenities. It has a cabin, a cockpit, a galley, a v-berth and a saloon as well.

Monohulls

Catamarans refer to twin-hulled structures that are attached by specialized members to provide strength. The term originates from the South Indian phrase for “tied pieces of wood”, as this was the manner in which traditional sailboats were built in the subcontinent.

Catamaran

Twin hulls offer an increased level of stability. In addition, if designed properly the vessel will have a much higher speed than conventional crafts owing to lower wetted-surface resistance forces.

On the other hand, extensive care must be taken in designing the vessel, or else the resistive forces can exceed the values found in monohulls.

Multi-hull crafts, or simply multihulls,  include vessels with anywhere between three to five hulls, although the three-hull variation is the most common. Such crafts are known as trimarans and are considered to be extremely stable owing to their large beam and lower centre of gravity.

Multi-hull crafts

Four and five-hulled vessels are more difficult to manufacture and hence are rarely used commercially. An advanced form of the catamaran design is the SWATH version.

SWATH is an acronym for Small Waterplane Area Twin Hull, and it achieves unprecedented levels of speed owing to a considerably small waterplane area. To reduce this area, the hull has a reduced beam above the surface of the water, while underwater buoyant structures ensure that the vessel has the necessary weight balance.

Small Waterplane Area Twin Hull

Common Monohull Designs

Monohulls are relatively easier to manufacture compared to multi-hull structures. Thus, there has been a wider range of innovations for this type of hull over the last thousand years.

The common classes of monohull crafts are – sailing dinghies, cutters, sloops, catboats, ketch and schooners.

A dinghy is a relatively common sailboat owing to its short overall length and ease of manoeuvring. They are used in competitions and in the port industry.

dinghy

Generally, dinghies are used to transport people or small cargo to and from a larger vessel such as a cruise ship that is anchored away from the shore.

Such vessels may not be able to enter a port due to size and tonnage regulations. Hence, dinghies serve as the best mode of transporting essential goods between the port and the vessel.

Dinghies can have sails, such as the three-sailed variant consisting of the mainsail, jib and spinnaker. However, motor-powered dinghies are also commonly used especially as lifeboats onboard ships.

Cutters are another class of sailboats that are medium-sized and generally have three sails. The mainmast on which the sails are mounted is located near the stern of the ship to allow for larger sails to be used.

Cutters

Cutters were commonly used in competitions as their design favours speed and agility. A different combination of the sails also allows cutters to be used for cruises and other recreational sailboats.

Sloops are similar to cutters and are the most commonly found sailboats. They are the standard in sail designs, with a two-sail configuration used for added manoeuvrability. They have a mainsail and a headsail called jib or genoa.

Sloops

In addition to the generic sloop sail configuration, there is also a fractionally-rigged sloop in which one of the sails lies below the top of the mast.

This design allows the crews of smaller sloops to handle the craft while improving performance. Catboats are sailboats equipped with only a single sail. They are aimed at capacity rather than speed and have the mainsail mounted on a single mast.

For increased speeds, sails can be added to the rigging such that wind force is better optimized by the vessel.

The ketch is a sailboat that has two main masts- the main mast located around the midship, and the mizzen mast at the aft. The mizzen mast is generally smaller than the main mast and serves to add speed to the craft. The word ketch is derived from the word catch, denoting the manner in which the sails “catch” the wind as they move.

ketch

Schooners are a class of sailboats that can have more than two sails supported on masts known as the main mast and foremast. The foremast is located near the fore of the vessel and is slightly shorter than the main mast. In variations where additional masts are added to support more sails, they are positioned such that they remain shorter than the main mast depending on their sizes.

Schooners

Keel Based Classification

The keel is the base of a vessel that provides a central backbone for the design of the entire structure. The boat keel is structurally relevant since it often has to carry the weight of the vessel.

In the case of sailboats, the keel is often what the entire craft rests on during transport by road or rail. Thus, keels need to have integral strength and be able to withstand a variety of forces.

Similarly, while sailing, the keel is the lowermost point of the vessel at which resistive forces act. As a result, many modifications are often made to the keel so that hydrodynamic features can be incorporated to reduce drag. Sailboats often sit high in the water owing to their design and shape.

However, for competition and performance crafts, it is essential that they try to sit as close to the surface of the water as possible without capsizing. Thus, the keel often plays the role of a central ballast, by integrating heavy iron or steel components so that the vessel draft increases.

Types of Sailboats Infographic

Based on keel type, there are several sailing boat variants found in the market. These generally have modified keels for improving performance and speed by integrating hydrodynamic features such as hydrofoils .

The types of keels commonly associated with sailboats are as follows: full-length keel, fin keel, centreboard keel, bilge keel, bulb keel and wing keel.

As the name suggests, full-length keels have keels that extend in the form of a long fin below the main structure of the ship. The fin runs along the length of the ship and often has an integrated rudder system attached at the stern.

The advantage of this type of keel is that it is easy to manufacture, with little cost in terms of development. Also, the ballast effect is provided by the extra weight of the full-length keel.

Since it can be difficult to enter certain ports or quays owing to the large draft that comes with this type of keel, manufacturers attempt to reduce fin depth and instead increase its length.

Fin keels , on the other hand, run only along certain regions of the sailboat. Located on the underside of the craft, it sticks out similar to the fin of a fish giving rise to this nomenclature. Since this type of keel must perform the same functions as the full-length keel without having a large length, the fin is deeper.

Fin keels

Owing to this large draft, it may be difficult to dock at certain ports due to depth restrictions. A key feature of this type of keel is that the rudder and manoeuvring systems remain independent of the fin keel, and are located at the extreme aft of the vessel. Centreboard keels are a common feature of high-performance crafts that take part in competitions. They are not restricted to monohull structures and are often found in catamarans and trimarans.

The centreboard keel employs a type of fin that is pivoted about a point on the keel of the vessel. By having a pivot, the natural flow of the vessel and surrounding water varies the depth at which the keel sits below the vessel. Similar to the fin keel, it only runs along a certain length of the vessel.

However, it is distinguished by being able to vary the angle of tilt with respect to the baseline of the craft. In some variations, the crew are able to manually change the angle of tilt, to change performance features during certain events and competitions.

Another variation of the centreboard keel is the daggerboard keel , which allows the fin to completely integrate into the underside of the vessel.

daggerboard keel

By providing a bay at the underside, the fin can be raised or lowered from the slot. In this type of keel, the raised configuration allows for higher speeds and reduced resistive forces. However, when lowered into the water, the vessel gains added stability and makes up for the loss in speed by improving hydrodynamic features.

Bilge keels refer to protrusions on the sides of the hull of the vessel, commonly called the bilges. These protrusions run along the length of the vessel while tapering into the hull panels at both ends.

The primary purpose of bilge keels is to improve the rolling stability of the craft. The fins stick out perpendicular to the hull and can vary in length depending on the purpose. For instance, sailboats require larger anti-roll stability and hence have long tapering bilge keels.

Bilge keels

The bilge keels must be symmetrically placed on both the port and starboard sides, so as to ensure even hydrodynamic characters.

A bulb keel is a protrusion sticking vertically below the craft and terminating in an oblong-shaped hydrodynamic device called the bulb. The bulb acts as a 3D hydrofoil that improves the stability and handling of the vessel. Due to the increased wetted surface area, there is a slight drop in the speed, but it can be made up through superior handling capabilities.

bulb keel

For smaller crafts, longer bulb keels are required, and as this length increases, the chance of accidental grounding of the vessel increases.

The last commonly found type of keel is the wing keel . The wing keel is similar to the bulb keel, except that instead of a bulb terminating a vertical protrusion, there are horizontal hydrofoils extending from the central shaft.

The primary purpose of the wings underneath the ship is to improve handling and stability. In addition, they slightly lift the craft above the surface of the water. As a result, the total wetted surface area remains constant and may even decrease. Thus, speed remains constant and may improve as the craft picks up velocity.

Mast Based Classifications

The mast of the vessel refers to a vertical shaft extending out of the deck which supports the sails and rigging. Older models of sailboats and ancient ships had masts constructed out of wood, while modern speed-oriented versions use galvanized steel or aluminium.

Aluminium has the benefit of being extremely light while still retaining its strength, which is important during harsh weather conditions.

The various mast-based classification includes – sloop, fractional-rig sloop, cutter, ketch, schooner and catboat.

The sloop is the most common mast type, where a single mast supports two sails called the headsail (or foresail) and the mainsail.

Mast based sloop

The headsail also goes by different names depending on the purpose and configuration of the sails.

In a fractional rig sloop , the forestay cable that is used to hoist the headsail is actually placed below the top of the mast. This configuration is particularly useful when it comes to performance, as the tip of the mast can be hauled towards the aft using stiff cables, and the sails can be collapsed.

fractional rig sloop

This is useful on days when wind power can be used to propel the sailboat, without the sails having to be fully extended.

Another useful feature of being able to trim or flatten the sails is that during particularly strong squalls of wind, the sails will not be punctured or ruptured due to the high wind pressure. The next type of mast configuration is the cutter. This involves a single mast supporting three sails- one mainsail, and two headsails known as the staysail hauled by the inner stay cable, and the jib hauled by the headstay cable.

The mast is located more towards the aft compared to the sloop, to allow for an easily manoeuvrable configuration. In addition, a wide range of sail arrangements makes it favourable for cruise operators and for competition purposes.

The ketc h has a two-mast configuration, with the aft mast known as the mizzen mast. The mizzen mast is located fore of the rudder post, and aft of the main mast.

Mast Based Ketch

The mizzen sail rests on the mizzen mast. In general, the mizzen mast is slightly shorter than the main mast.

mizzen sail

The main mast supports two sails known as the mainsail and the headsail.

The schooner is another configuration similar to the ketch, but where the aft mast is taller than the foremast.

schooner

Schooners can have multiple masts and are not restricted to commercial small and medium sailboats. The images of ancient ships that were used for trade and military purposes were often schooners having between four to six masts with an average of over ten sails each.

In addition, the sails of the schooner tend to lie along the length of the vessel, rather than along the beam. This is to prevent sail rupture during violent storms or during heavy winds. The catboat is one of the simplest configurations where only a single sail and mast arrangement are used.

The mast can be located either aft or fore of midships, with varying advantages to each configuration. The ease of design and construction makes it a favourable sailboat for beginners and trainees. However, the disadvantage behind the catboat is that the sail cannot be used to move against the direction of the wind, unlike other sail variations.

Apart from recreation purposes, sailboats are one of the most common types of vessels used in recreational purposes and competitions. They can vary in the hull, keel and sail configurations based on the primary purpose that they are intended to be used for.

For over five thousand years, sailboats have been in use, whether it has been for transportation in Ancient Egypt, or for sailing events in modern times. Technological advancements have turned the sailboat into a sleek, agile and fast vessel capable of reaching extremely high speeds by harnessing the power of the wind.

Whether it be for cruises or for racing events, sailboats and other such crafts continue to be a favourite choice for sailors.

Frequently Asked Questions About Sailboats

1. how many different kinds of sailboats are there.

There are many types based on their hull type- monohulls, catamarans and trimarans; keel type- fin keel, wing keel, daggerboard, centreboard; mast configuration and sails- sloop, fractional rig sloop, schooner, ketch, yawl, cutters and catch.

2. What is the most common type of sailboat?

The sloop is the most common sailboat. It has a mast, two sails, commonly a Bermuda rigged main and a headsail. They include a gaff rig, a mix of gaff and square rig or a Bermuda rig.

3. What is a four-masted sailboat called?

It is called a schooner. Traditional schooners have a gaff-rig, which means that they have a square topsail on the front of the mast. They were mainly constructed for carrying cargo, passengers and for fishing.

4. How many masts does a ketch have?

Ketch has two masts whose main mast is taller than the mizzen mast. It is similar to a yawl and has a triangular mizzen sail and a triangular or square headsail. Due to their smaller sails, they are easily manageable and preferred by sailors.

5. What is the most beautiful sailboat?

Some of the most beautiful sailboats in the world include Pelagic Australis, Thomas W Lawson, Royal Clipper, Barque Sedov and Amerigo Vespucci.

6. What are some popular sailboat brands?

Beneteau, Sparkman and Stephens, Oyster Yachts, Amel Yachts and Nautor’s Swan are some popular sailboat brands that sell the most number of sailboats yearly.

You Might also like to read

  • Real Life Accident: Officer Of The Watch Ignores Lookout’s Warning, Ship Collides with Sailboat
  • Introduction To Different Types Of Yachts
  • 12 Sailing Books For Beginners
  • The Ultimate Guide to Different Types of Boats – Top 20
  • Main Types of Catamarans Used in the Shipping World
  • What are Tug Boats – Types And Uses

Disclaimer:  The author’s views expressed in this article do not necessarily reflect the views of Marine Insight. Data and charts, if used, in the article have been sourced from available information and have not been authenticated by any statutory authority. The author and Marine Insight do not claim it to be accurate nor accept any responsibility for the same. The views constitute only the opinions and do not constitute any guidelines or, recommendations on any course of action to be followed by the reader.

The article or images cannot be reproduced, copied, shared or used in any form without the permission of the author and Marine Insight.

Do you have info to share with us ? Suggest a correction

How Much Cargo Can A Cargo Ship Carry

Latest Naval Arch Articles You Would Like :

Port and Starboard Of Vessels – Everything You Wanted To Know

Port and Starboard Of Vessels Explained – Everything You Wanted To Know

An Introduction to Tunnel Thrusters in Ships - Design and Application

An Introduction to Tunnel Thrusters in Ships – Design and Application

Ship Stability - What Makes a Ship Unstable

Ship Stability – What Makes a Ship Unstable?

Design And Construction Of Ice Class Ships – Part 1

Design And Construction Of Ice Class Ships – Part 1

Methods For Designing Ship’s Hull – A General Overview

Methods For Designing Ship’s Hull – A General Overview

15 Main Advantages of Advanced Outfitting For Shipbuilding

15 Main Advantages of Advanced Outfitting For Shipbuilding

Subscribe to our newsletters.

By subscribing, you agree to our  Privacy Policy  and may receive occasional deal communications; you can unsubscribe anytime.

Web Stories

US Navy sailor charged with espionage for passing Confidential Data To Foreign Government

About Author

Ajay Menon is a graduate of the Indian Institute of Technology, Kharagpur, with an integrated major in Ocean Engineering and Naval Architecture. Besides writing, he balances chess and works out tunes on his keyboard during his free time.

Leave a Reply

Your email address will not be published. Required fields are marked *

Subscribe to Marine Insight Daily Newsletter

" * " indicates required fields

Marine Engineering

Marine Engine Air Compressor Marine Boiler Oily Water Separator Marine Electrical Ship Generator Ship Stabilizer

Nautical Science

Mooring Bridge Watchkeeping Ship Manoeuvring Nautical Charts  Anchoring Nautical Equipment Shipboard Guidelines

Explore 

Free Maritime eBooks Premium Maritime eBooks Marine Safety Financial Planning Marine Careers Maritime Law Ship Dry Dock

Shipping News Maritime Reports Videos Maritime Piracy Offshore Safety Of Life At Sea (SOLAS) MARPOL

The Various Types of Sailboats and Rigs

 Aditya Adjie / EyeEm / Getty Images

The Modern Sloop

The most common type of small-to-midsize sailboat is the sloop. The rig is one mast and two sails. The mainsail is a tall, triangular sail mounted to the mast at its leading edge, with the foot of the sail along the boom, which extends aft from the mast. The sail in front called the jib or sometimes the headsail, mounts on the forestay between the bow and the masthead, with its trailing corner controlled by the jib sheet.

The Bermuda or Marconi Rig

These tall triangular sails are called the Bermuda rig, or sometimes the Marconi rig, named for their development more than two centuries ago in Bermudan boats. Because of the physics of how force is generated by wind blowing past a sail, tall thin sails generally have more power when the boat is sailing into the wind.

Racing Sloop

Gail Oskin / Getty Images

Here is another example of a sloop with a Bermuda rig. This is PUMA Ocean Racing's il Mostro, one of the fastest monohull sailboats in the world, in the 2008/2009 Volvo Ocean Race. The sails are much bigger than found on most cruising sailboats, but the general rig is the same. In both of the sloops shown so far, the jib reaches to the top of the masthead. These are sometimes called masthead sloops.

Fractional Sloop Rig

Ahunt [CC0] / Wikimedia Commons

Here, notice a small racing dinghy with a sloop rig. This is still a Bermuda rig, but the mainsail is proportionally larger and the jib smaller, for ease of handling and maximum power. Note that the top of the jib rises only a fraction of the distance to the masthead. Such a rig is called a fractional sloop.

KenWiedemann / Getty Images

While a sloop always has two sails, a cat-rigged boat generally has only one. The mast is positioned very far forward, almost at the bow, making room for a very long-footed mainsail. The mainsail of a cat rig may have a traditional boom or, as in this boat, a loose-footed mainsail attached at the aft corner to what is called a wishbone boom.

Compared to Bermuda Rigs

A primary advantage of a cat rig is the ease of sail handling, such as not having to deal with jib sheets when tacking. Generally, a cat rig is not considered as powerful as a Bermuda rig, however, and is more rarely used in modern boats.

Cat-Rigged Racing Dinghy

technotr / Getty Images

In this photo, there is another cat rig, which works well on small racing dinghies like this Laser. With a small boat and one sailor, a cat rig has the advantages of being simple to trim and very maneuverable when racing.​

John White Photos / Getty Images

A popular rig for midsize cruising boats is the ketch, which is like a sloop with a second, smaller mast set aft called the mizzenmast. The mizzen sail functions much like a second mainsail. A ketch carries about the same total square footage of sail area as a sloop of the equivalent size.

Make Sail Handling Easy

The primary advantages of a ketch are that each of the sails is usually somewhat smaller than on a sloop of equivalent size, making sail handling easier. Smaller sails are lighter, easier to hoist and trim and smaller to stow. Having three sails also allows for more flexible sail combinations. For example, with the wind at an intensity that a sloop might have to double-reef the main to reduce sail area, a ketch may sail very well under just jib and mizzen. This is popularly called sailing under “jib and jigger”—the jigger being an old square-rigger term for the aft-most mast flying a triangular sail.

While a ketch offers these advantages to cruisers, they may also be more expensive because of the added mast and sail. The sloop rig is also considered faster and is therefore used almost exclusively in racing sailboats.

Public Domain

A yawl is very similar to a ketch. The mizzenmast is usually smaller and sets farther aft, behind the rudder post, while in a ketch the mizzenmast is forward of the rudder post. Aside from this technical difference, the yawl and ketch rigs are similar and have similar advantages and disadvantages.

Tomás Fano [ CC BY-SA 2.0 ], via Wikimedia Commons

A typical schooner has two masts, and sometimes more, but the masts are positioned more forward in the boat. Unlike in a ketch or yawl, the forward mast is smaller than the aft mast (or sometimes the same size). One or more jibs may fly forward of the foremast.

Traditional Schooners

While some modern schooners may use triangular, Bermuda-like sails on one or both masts, traditional schooners like the one shown here have gaff-rigged sails. At the top of the sail is a short spar called the gaff, which allows the sail to extend back along a fourth side, gaining size over a triangular sail of the same height.

Gaff-rigged schooners are still seen in many areas and are well loved for their historic appearance and sweeping lines, but they are seldom used anymore for private cruising. The gaff rig is not as efficient as the Bermuda rig, and the rig is more complicated and requires more crew for sail handling.

Schooner With Topsail and Flying Jibs

  Print Collector   / Getty Images

Above is another gaff-rigged schooner that is using a topsail and several flying jibs. Tacking or gybing a complicated sail plan like this takes a lot of crew and expertise.

Square-Rigged Tall Ship

Bettmann  / Getty Images

In this illustration, notice a large three-masted square-rigger flying five tiers of square sails, several headsails, and a mizzen sail. Although this is a modern ship, one of many still used around the world for sail training and passenger cruise ships, the rig is essentially unchanged from centuries ago. Columbus, Magellan, and the other early sea explorers sailed in square-riggers.

Generating Power

Remarkably efficient sailing downwind or well off the wind, square sails do not generate power from their leading edge as in the Bermuda rig, which has become predominant in modern times. Thus, square-riggers generally do not sail upwind. It was due to this limitation that the great trade wind sailing routes around the world were developed centuries ago.

Learn the Parts of a Sailboat and How to Communicate Them

Heavy Weather Sailing

Buying a Sailboat: Sloop vs. Ketch

West Wight Potter 19 Sailboat Review

How to Rig Your Small Sailboat and Prepare to Sail

Review of the O'Day Mariner 19 Sailboat

Learn How to Sail a Small Sailboat

The 9 Best Recreational Kayaks

The 12 Best Inflatable Stand-Up Paddleboards of 2024, Tested and Reviewed

The 11 Best Two-Person Tents of 2024, Tested and Reviewed

Tall Ships in Los Angeles and Southern California

The 4 Best Bass Boats

The 10 Best Kites

The 10 Best Women’s Sailing Shoes

How to Choose the Best Cabin on a Cruise Ship

The Best Sunglasses for Men of 2024, Tested and Reviewed

MarineSource.com

Boats for Sale

Guide to the different types of sailboats.

email share

Sailing is a wonderful hobby that is appropriate for a wide range of ages and ability levels. Sailing is the art of controlling and maneuvering a boat with the power of sails. Sailors need to learn about the power of wind and water, as well as understand the basic function and operation of a sailboat. A sailboat is a small to mid-sized boat that is powered by the use of sails, some more modern designs are also powered with a small motor, but this is not characteristic of most sailboats. The dual forces of hydrodynamic and aerodynamics combine to provide a sailboat with the ability to move through water. A sailboat may have one or more sails attached to the mast and/or a boom. Sails may also be attached to winches, mechanical devices used for winding, or to cleats that are used for tying. Learning how to maneuver the sails and steer the sailboat takes time and attention; for the safety of those onboard and fellow sailors, it is important that each sailor understand the proper way to maneuver and operate a sailboat.

There are many different types of sailboats. Sailboats can be categorized into a few different types, depending upon the number and location of sails, as well as the number of masts. Here is a brief introduction to the different types:

A catboat is a single-sail boat with one mast set up near the front of the boat. The origin of the catboat can be traced back to New York in the 1840s. Its easy operation and large capacity helped the sailboat gain popularity among sailing enthusiasts. The catboat has a broad beam, a centerboard and a single mast and sail. However, any sailboat with a single sail carried forward is referred to as a catboat. Popular catboats include the Beetle Cat, Barnegat Bay and Sanderling.

  • Association for Catboat Sailors
  • What is a Catboat

A cutter is a sailboat with one mast and more than one headsail. According to Frank Sargeant in The Complete Idiot's Guide to Boating and Sailing , a cutter has a mast stepped amidships with two sails that are set up forward of the mast. Usually, the staysail is directly in front of the mast. The cutter is ideal for small crews or groups of people and most cutters can be easily managed without the need for complicated tackles or winches.

  • What is a Cutter
  • Peterson Cutters

A dhoni, or doni, is a handcrafted, sailboat with either a motor or lateen sails. Popular in the Maldives, this boat is used for transportation and even, for staying aboard comfortably. Traditionally, this boat was built of coconut palm wood and used by Maldivian fishermen. Today, the dhoni is typically built using fiberglass, are generally motorized with a steering wheel and are furnished as well. According to the FAO, the motorized fishing vessels or masdhoni are fitted with satellite navigation systems, hydraulic line haulers, sonars, fish finders and have room for accommodation as well.

  • Association for Wooden Boats
  • About the Dhonis of Maldives

A smaller version of the sailboat, the dinghy has three or less sails - the mainsail, jib and spinnaker. These small boats are easy to handle and fun to sail, making them popular with youngsters. Dinghies are further divided into different types such as catamarans, skiffs, classic dinghies, cruising dinghies, high performance dinghies, racing dinghies and sports dinghies.

  • Types of Dinghies
  • Dinghy Sailing Races

Fractional Rig Sloop

A fractional rig sloop is a sailboat in which the headstay is attached to the mast at some point lower than the masthead. This enhances performance in certain conditions but may make the fractional rig sloop a little difficult to handle, since the bend of the mast has an impact on the mainsail and bending the mast perfectly requires a fair amount of skill. However, the fractional rig requires fewer sail changes and lesser experienced sailors may benefit from setting up a masthead rig or one in which the headsail reaches all the way to the top of the mast.

  • Definition of a Fractional Rig

A ketch is a sailboat that has two masts and two sails. The second mast is called a mizzen and the sail is called the mizzen sail. The second mast is shorter than the main mast and is located forward of the rudder. Smaller and narrower in size than other sailboats, ketches were traditionally used for trading purposes and for bombing in the 17th century.

  • What is a Ketch
  • Ketch Sailing Guide

A schooner is a large sailboat and generally, has two or more masts with the aftermost mast being taller than or equal to the height of the forward mast. The schooner rig is made up of the bowsprit, fore and main mast and their sails. Freight schooners may have three or more masts. Schooners were introduced by the Dutch and later adopted in North America to carry cargo and for fishing. One of the most popular schooners is the Clotilde, the last ship to bring African slaves to the U.S and the USS Hannah, the first armed American naval vessel.

  • About the Arctic Schooner
  • Sailing the Schooner

A sloop is the most common type of sailboat. It has a single mast and a fore-and-aft rig. The position of the mast is determines whether a sailboat will be termed a sloop or not. The forestay on the sloop runs to the outboard end of the bowsprit, rendering the bowsprit fixed and non-retractable. The Bermuda sloop is the name given the contemporary yacht due to the Bermuda rig, which is ideal for upwind sailing.

  • Sloop Glossary
  • Sailing on a Sloop

Similar to a ketch, the yawl is a sailboat with two masts and the mizzenmast is shorter than the main mast. However, the mizzenmast on a yawl is not forward of the rudder as in the ketch, but aft of the main mast. Moreover, it is used for creating balance rather than for propelling the vessel. Originally, the yawl was developed for the purpose of commercial fishing however, in the 1950s and 60s; yawls were developed for racing, a tradition that continues in many places even today.

  • Yawl Sailing Association
  • Concordia History

Misc. Sailing Sites

  • International Sailing Federation
  • American Sailing Association
  • Sailing for the Blind
  • Training for Sailing
  • Sailing Magazine
  • Disabled Sailing Association
  • Sailing School

Connecting with Marinesource.com

facebook

Copyright 1992-2024 MarineSource Network, Inc. All Rights Reserved.

Sail Types: A Comprehensive Guide to 8 Types of Sails

Sailboats come in all shapes and sizes. And that means there are many types of sails on the market! For those who might not know, sails are made of canvas and use wind power to propel sailboats through the water.

Understandably, different sails are required for different types of sailboats . And sailboats are categorized by the number of hulls they have. Monohulls have a single-hull design, catamarans have two hulls, and trimarans have three. Generally, sailors use catamarans for upwind sailing (but they can be used to sail downwind in certain conditions). 

The type of sail you'll need for your sailboat depends on the kind of sailboat you have. Additionally, sails are highly dependent on the wind and weather conditions. Therefore, it's always a good idea to have different types of sails on board to navigate the ever-changing weather conditions. 

Sailboat-Types

8 Types of Sails for Sailboats

As mentioned, you should carry multiple sails when sailing to prepare for various weather conditions. Here's a brief overview of the types of sails for sailboats: 

1. Mainsails

The mainsail is the largest and most important sail. Therefore, it's probably the first sail to come to mind when you think of camping. Typically, it's situated directly behind the mast — connected to the boom — and uses wind energy to move the vessel. The mainsail plays a significant role in tacking and gybing, making it essential for any voyage. 

Since the mainsail is a larger sail, it doesn't require wind to propel it forward. And the fact that it can be moved by moving the boom makes it uber-easy to operate. 

Learn More About Sailing

2. Headsail

The headsail often accompanies the mainsail, though it is smaller in size. Regardless of your sailboat type, the headsail is positioned at the front of the mast – over the sailboat's bow. 

Because headsails are small, they are helpful when navigating through windy conditions. Smaller sails catch less wind, preventing them from propelling your boat as strongly as larger sails. Additionally, headsails help lift, balance, and protect the vessel from inclement weather conditions.

While the term 'headsail' refers to any sail in front of the mast, the jib is the most common type of headsail. (And when a jib is so large that it overlaps the mast, it's called a genoa.)

Learn More About Sailboats

The genoa is a large sail that attaches to the front of the forestay. (In this instance, it's similar to a headsail.) However, the genoa is larger than the headsail and overlaps the mainsail partially or completely to help the boat go faster. 

Genoa sails are useful when sailing through light or medium wind. You can also use it when the wind comes directly from the rear. If you use a Genoa sail during high winds, you'll probably start sailing too quickly and put yourself and your boat at risk. 

4. Spinnaker

The spinnaker is a large and whimsical (often colorful) sail. Spinnaker sails are usually symmetrical, allowing them to reach different points of sail. Generally, these are lighter sails and don't cover the mast like the genoa. 

Because spinnaker sails are on the larger side, you have to be incredibly careful with them. Don't use them in rough conditions. Instead, save them for sailing in low winds and calm seas.

5. Gennaker

As the name suggests, the Gennaker sail combines a spinnaker and a Genoa sail. They are as large as the spinnaker, although they're not symmetrical.

They come in handy whenever the wind changes from a pure dead run to a reaching point of sail, as sailors can navigate various wind types with the same sail. It's still only meant for lighter and milder winds, but it's more versatile than the spinnaker and genoa. 

6. Light Air Sails

Light air sails are useful in calmer conditions when the headsail and mainsail alone aren't cutting it. They include:

  • Code Zero : A code zero sail is a gennaker sail ideal for sailing in light to mild winds. It's designed to create lift and boost boat speed whenever regular sails don't generate enough power. For that reason, many racers and cruisers use code zero sails to improve performance and gain control in various situations.   
  • Windseeker : This small, special sail is reserved for no wind or light wind. Essentially, it helps boats remain maneuverable in extremely calm conditions. And for that reason, it's valuable to long-distance sailors. 

7. Storm Jib

Storm jibs can be used as a headsail whenever the weather is particularly rough and windy. Because it functions as a safety seal, it prevents boats from capsizing by reducing the sail area exposed to the wind. Therefore, it's a necessary sail for every sailor. 

Read Next: Boating in Inclement Weather

During strong winds and storms, sailors can raise a trysail — a small, triangular sail near the boat's stern — for better control and stability. Generally, sailors do this whenever the mainsail becomes too large and challenging to maneuver.  

Sailing Basics: 10 Nautical and Sailing Terms To Learn

Join Our Newsletter!

Get community news, buying bargains, and how-to guides at your fingertips.

  • Pontoon Boats
  • Personal Watercraft
  • nauticalknowhow
  • Nautical Knots
  • Tools and Calculators

Types of Sailboats: Classification Guide

Ian Fortey

Sailboats can be divided into three basic types based on their hulls (catamaran, monohull or multihull) , their keel and their rigging, and then further subdivided from there. The result is that there are actually well over a dozen different kinds of sailboats out there.

Sailboat Hull Types

sailboat with three sails

There are three main hull types that you’ll find in sailboats.

  • Monohull: This is what most people think of when they think of a sail boat or any boat at all, really. A monohull sailboat has a single hulled structure that gives a boat that traditional boat shape we all instantly recognize. These are far and away the most common hull type for sailboats because they’re some of the oldest, they’re cheaper to produce, and they are fairly easy to maintain compared to the other options. You can do a lot more with the rigger in monohull sailboats and any sailing vessel with multiple masts is invariably going to be a monohull one. The downside of the monohull compared to the others is that they lack the stability.
  • Catamaran: The second hull type you’ll find in sailboats is the catamaran . While technically a multihull vessel, they feature two hulls that are located on either side of the boat connected by a deck. Because it’s just the two, they get called catamarans rather than multihull which generally refers to three. Catamarans had been used by ancient peoples for years but never really caught on with “modern” boating for quite a long time. Now that we have fiberglass hulls and other advances, catamarans are much more commonplace than they were a  hundred years ago. Catamarans offer great speed and stability but don’t have as much cabin space as a monohull.
  • Trimaran/Multihull : This hull style features three hulls in a similar style to the catamaran with the addition of that third center hull. From the side you wouldn’t be able to tell a catamarans from trimaran sailboats. These boats are even faster and more stable than a catamaran and, by extension, a monohull. They have a very low center of gravity and a large beam. Space is still a drawback but the third hull increases room overall. There are also vessels with even more hulls, but they are exceedingly rare and also pretty expensive.

Sailboat Keel Types

sailboat with three sails

Heading below the hull now and we’ll find the keel, which is what gives your sailboat added stability in the water. While multihull boats find stability in the additional hulls, a monohull boat will get stability from its keel. Though it’s nearly impossible to flip or capsize a trimaran, if it does happen it’s staying flipped or capsized. However, the keel on a monohull boat makes it even harder to flip because of the physics of resistance in the water. That isn’t to say a monohulled boat with a keel is unsinkable, quite the opposite, but you’re just not going to flip one upside down without a real fight. There are six main keel types you’ll find in sailboats.

  • Bilge Keel: These are dual keels that can be like fin keels or even full keels extending the length of the vessel. They extend from the sides and can prevent the boat from rolling. They need to be symmetrical on both sides of the boat to work.
  • Bulb Kee l: These are a kind of fin keel but they carry ballast in them. That allows them to have a little more stability. They operate like a hydrofoil
  • Centerboard Keel: This type of keel actually pivots and can be changed depending on the depth of the water.
  • Daggerboard Keel : Another kind of centerboard keel but the daggerboard can actually be pulled up into the hull. This allows you to alter its position for an increase or decrease in speed or stability as needed.
  • Fin Kee l: If you’re into racing you’ll probably have a fin keel. They are thin but extend deep below the sailboat. This makes them great for speed but not really ideal for a comfortable ride. You wouldn’t want to be day sailing for fun and relaxation with a fin keel.
  • Full Keel: This is the most common type of keel and it spans the entire length of the vessel. There will likely be a rudder built into the keel as well.
  • Wing Keel : This is a variant on the fin keel. Wing keels have a small wing at the tip to allow better directional stability by reducing cross flow.

Sailboat Mast Configuration

sailboat with three sails

The mast of the sailboat is obviously that large pole onto which sails are rigged. Depending on your boat type you may have one mast, two masts, or more masts. How these masts are configured is where you can start distinguishing sailboat types you may recognize by name.  These include:

Sloop: This is arguably the most popular type of sailboat mast type. A sloop has a single mast and two sails – the headsail and the mainsail. Being a single masted sailboat makes them easy to identify. These are probably the easiest to learn how to rig and how to sail. It’s versatile enough for cruising and for racing. Commonly these a gaff rig or a Bermuda rig. Another kind of sloop rig is the fractional rig sloop in which you can find one of the sails below the top of the mast.

Schooner: These can have multiple masts, not just two. The largest sailing vessels you’re likely to see, either in the present or in images from history, were schooners. Giant ships with six masts each bearing over 10 sails were schooners. An important detail is that the first mast on a schooner will always be shorter than the others. They are usually gaff-rigged

Cutter: This type of sailboat is very similar to the sloop and has a centrally located mast supporting three sails. Two headsails, the second called a staysail, is what distinguishes it most easily from the sloop. The rigging makes a cutter a bit harder to manage than a sloop.

Ketch : A ketch is a lot like a schooner but the two masts are arranged differently. On a ketch, the main mast is taller than the aft mast which is called the mizzen mast. The mizzen sail naturally is on the mizzen mast with the mizzen mast positioned aft.

Catboat : Also called a cat, a catboat has a single mast and a large, single gaff sail. The boats are usually short, stout boats that aren’t built for speed or for open seas. Best to be used in coastal waters

Yawl: This vessel is nearly identical to the ketch with one main difference. In a yawl, the helm is forward of the mizzen mast, while that is not the case in a ketch.

Other Types of Sailboats

Sailboat

Now that we have the basic configurations out of the way, let’s look at some of the more specific types of sailboats you may find at sea. In some cases you’ll see that these terms are not entirely specific and one term may actually apply to multiple kinds of sail boats in much the same way that something like SUV can describe multiple different vehicles that are similar but not all the same.

Sailing Dinghies

Like any dinghy, a sailing dinghy is going to be a small vessel. Typically made to accommodate just one or two people, they are under 15 feet and the smallest of which are often used by children. Optimist dinghies are raced professionally and must meet certain requirements to be officially registered as true Optimist boats. If you’re totally new to sailing, a sailing dinghy might be a good place to learn the ropes.

Daysailer generally refers to any sailboat that is not intended to either race other boats or keep you out on the water for an overnight stay. As such, it can cover a lot of ground. Typically, a daysailer will probably be between 14 feet and 20 feet. Usually you won’t get more than 4 people on board and there will be room for storing gear but not a sleeping berth. These are great beginner sailboats.

Pocket Cruisers

Like a daysailer, a pocket cruiser is more of a general label for boats rather than a specific kind. In this case, any sailboat under 30 feet could technically be considered a pocket cruiser. Basically it should be trailerable and used for either cruising or racing. They may contain a small cabin or berth. They could be outfitted for long offshore trips.

Trailer Sailer

Very similar to a pocket cruiser, a trailer sailer is a smaller vessel but still larger than a sailing dinghy. There is clear overlap between trailer sailers, daysailers, and pocket cruisers and the same name could technically be used for many different boats. The defining characteristic of a trailer sailer is that it can easily be transported by trailer behind your tow vehicle. Unlike a sailing dinghy, a trailer sailer would likely have a retractable keep like a centerboard or daggerboard.

Racing Sailboats

These boats can be very large, anywhere from 20 feet to over 70 feet, and they are designed to be light and fast on the water. Larger racing sailboats required a skilled crew to operate. These have keels intended to increase speed and even laminate sales to improve performance. Smaller racing boats can be manned by just one or two people. They don’t offer a lot of creature comforts and aren’t meant for relaxing trips at sea.

Beach Catamarans

Beach cats get their name from the fact they’re designed to be beached and can be launched again from the beach if you so desire. They are usually under 25 feet and not meant for extending sailing offshore, rather they are designed for daysailing. They are very agile and fast and take a good foundation of knowledge to control properly.

Cruising Catamarans

sailboat with three sails

This is the larger style of catamaran designed for more serious boating. Like any catamaran they have a shallow draft but these can be between 25 feet and up to more than 50 feet. They’re designed for extended cruising offshore.

Cruising Sailboats

Boats like schooners quality as a cruising boat and they are typically at least 16 feet in length but may get well over 50 feet as well. Cruising sailboats include cabins for extended stays offshore and, if the boat is large enough, will likely have a fairly large living space below deck which includes a galley and a head in addition to sleeping berths. These are often called liveaboard sailboats .

Cruisers are often monohull but can just as easily be multihull. When properly outfitted they can be used for long, extended stays at sea that last weeks or more. Depending on rigging a cruising sailboat could easily be a sloop, a schooner, a cutter, a ketch or even a superyacht.

Racing Cruisers

This is essentially a hybrid of the cruising sailboat and the racing sailboat. It’s built for more speed than a cruiser but it will have better accommodations than a racing sailboat to allow for stays at sea.  The end result is a lighter cruiser ideal for a few days at sea that can get some good speed.

Bluewater Cruising Boats

These are basically the next step up from a cruising sailboat. A bluewater cruiser is meant to sail across oceans, which is where the bluewater part of the name comes from. These are large sailboats and are best only sailed by skilled sailors. They can be outfitted for very long stays at sea and are able to handle rough weather better than smaller vessels.

Motorsailers

You don’t hear this term much anymore but it refers to a sailboat that also has an inboard motor so that they can travel under engine power or wind power. Typically these are larger vessels with accommodations below deck and designed for extended stays off shore. That said, because they mix both styles of boat, they fall somewhere short of either in terms of performance. The engine takes up space and adds weight, limiting your sailing abilities. Obviously traditional sailboats won’t include a motor.

The Bottom Line

There are a number of different kinds of sailboats and the easiest way to distinguish them is by comparing hull types, sail and mast configuration, and keels. Many terms you hear to describe sailboats can describe more than one kind, while others are very specific and the boat must meet certain requirements to merit the name. The only thing that truly unites every type of sailboat is the fact it must be powered by the wind, and even then there are hybrid versions that use motor power sometimes.

Learning the rigging of the different types of sailboats, including things like gaff rigs, standard rigging, and other rig types can be hard work and time consuming as some of these sailing boat rig types are far more complex than others.

' src=

My grandfather first took me fishing when I was too young to actually hold up a rod on my own. As an avid camper, hiker, and nature enthusiast I'm always looking for a new adventure.

Categories : Boats

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

More in Boats

sailboat with three sails

What Is A Gunwale?

Best Snorkeling in Maui

131 of the Best Hawaiian Boat Names

sailboat with three sails

167 Patriotic Boat Names

sailboat with three sails

The 138 Best Boat Names for Dog Lovers

sailboat with three sails

The People’s Poncho Review and Ratings 

sailboat with three sails

Oru Lake Kayak Review

sailboat with three sails

About Boatsafe

Established in 1998, BoatSafe is your independent guide into the world of boating, fishing, and watersports. We provide expert insights and detailed guides to help you find products tailored to your needs and budget.

Contact Boatsafe

  • Address: 4021 West Walnut Street. Rogers, AR 72756
  • Phone:  (479)339-4795
  • Email: [email protected]

Site Navigation

  • How We Test
  • Corrections Policy
  • Privacy Policy
  • Terms & Conditions
  • Editorial Policy
  • Affiliate Disclosure

Our Reviews

Boat Safe BBB Business Review

All content is © Copyright 2024. All rights reserved.

The 15 Different Types Of Sailing Ships

Paul Stockdale Author Avatar

The 15 types of sailing ships are listed below.

  • The Schooner
  • The Carrack
  • The Brigantine
  • The Barquentine
  • The Clipper
  • The Windjammer
  • The Fully Rigged Ship

Throughout centuries, there have been many different types of sailing ships seen from harbors and coastlines around the world.

This article will show the various types of sailing vessels that have made their mark in maritime history and we showcase their purposes and why they are still remarkable feats of marine engineering.

The different sizes, shapes, and masts of the ships required different numbers of sailors to handle them and each type of ship was crafted with a different purpose in mind.

All ships are unique with no two types of ships being the same with each coming with its own experiences, features and requirements.

1. The Schooner

The Schooner

The Schooner sailing vessel, with an average size of 46m (152 feet) in length, was developed in the early 17th century and first used by the Dutch.

The ship came with fore and aft sails and they were created to operate in the toughest of wind and ocean conditions.

The Schooner was a multi-purpose sailing vessel used for transporting slaves to transporting cargo and it was used for fishing and racing too.

There are 5 different schooner types that are characterized by their rig configurations listed below.

  • Tern schooner : This was a 3-masted schooner most popular between 1880 and 1920 capable of carrying up to 400 tons in cargo and it required a crew of 6-8 people
  • 4-6 masts schooner : These schooners spread the sail area over smaller sails
  • Grand Bank Fishing schooner : Similar to the famous Bluenose, it carries the main gaff topsail and a fisherman's staysail set between the masts.
  • Square Topsail schooner : This was a combination of fore and aft sails and small square sails, most popularly used for coastal cargo transportation in the 1800s
  • Coastal schooner : This was a coastal schooner sailing ship used for carrying goods and general cargo to nearby islands along the coast ( 1 )

The 19th Century schooner came with two or three masts, the one at the fore being shorter than the others.

Modern schooners, with Bermuda rigged sails, remain powerful, economical coastal liners traversing the Pacific.

Famous schooner sailing ships are listed below.

  • America : The Schooner named " America " was designed for racing and it became the first winner of the America's Cup international sailing trophy ( 2 )
  • Thomas W Lawson : The schooner “ Thomas W Lawson ” had a unique seven masts, with interchangeable sails and gear
  • Wawona : The schooner " Wawona " was one of the largest lumber carriers and fishing vessels between 1897 and 1947

2. The Carrack

The carrack sailing ship

The Carrack, developed in the 14th and 15th centuries with the first built in Portugal, is a nautically-rigged wooden ship with three or four masts each having square sails or triangular sails and it was heavily used between the 14th to 15th Centuries and remained popular until the 18th Century. It is the sailing ship Christopher Columbus used to sail the world.

It was the largest ship in Europe with the Spanish Carrack being more than 1,000 tons in weight and 150 feet (45 meters) in length. More modern versions of the Carrack were developed by the Portuguese and they could hold up to 2,000 tons. ( 3 ).

The Carrack had 4 decks with the lower 2 used for cargo, the 3rd was for accommodation and the 4th was for cargo owned by the crew ( 4 ) and this bulky ship was the standard trading ship along the Baltic, Mediterranean, Asian, and Atlantic coasts in the mid-16th century useful for carrying cargo across seas.

The Carrack had a strange shape which made it cumbersome to sail close to the wind and after a lot of engineering experiments, parts of the ship were stripped off giving the ship a high stern and a low bow.

The modern Carrack features a square-rigged mainmast, foremast, and a latten-rigged Mizzen mast, along with a rounded stern, sizable bowsprit, forecastle, and aft castle.

This is a large ship, built to carry heavy freight for long-distance hauls since it was very steady even in the worst weather with the British Army calling it the “Great Ship” because of its highly-functional ship design.

Famous carrack shipping vessels are listed below.

  • Santa Maria : This was the famous ship that Christopher Columbus used to sail and discover America in 1492
  • Victoria : The first ship to circumnavigate the globe
  • Grace Dieu : This was commissioned by King Henry V and it was one of the largest carrack ships in the world in 1418
  • Cinco Chagas : This was presumed to be the richest ship at that time. it was sunk in battle in 1594 ( 5 )

3. The Brigantine

The Brigantine

A Brigantine is a two-masted sailing ship with the main mast both a fore-and-aft main sail, a triangular type of sail and a square main topsail that came in various sizes ranging from 30 tons to 150 tons and it could carry a crew of up to 125 people but the shipping vessel could still be handled by a smaller crew if needed.

These ships were similar to the sailing vessel called the Brig as they both had top-gallant sails and were used by the Royal Navy to scout and monitor enemies on the high seas while also being popular amongst pirates as they were faster and easily maneuverable sailing vessels.

It is unclear when the ship was originally built with loose definitions date the ship back to the 13th century when it was originally referred to as the "sail and oar-driven war vessel" ( 6 ) and early academic definitions where the vessel was referred to as the "Brigantine" was first seen in books in the early to mid-16th century ( 7 ).

They would sail across the trade routes of the Baltics and Northern Europe, all the way from Germany to Scandinavia.

The mid-size ships had two sails on the-mainmast with a stripped-down fully-squared rig.

4. The Barquentine

The Barquentine

The Barquentine, first built in the 17th century and also referred to as a " schooner barque ", " barkentine " or " schooner bark ", is a sailing ship similar to a barque but with only the foremast square-rigged and the remaining masts rigged fore and aft ( 9 ). They weighed 250 to 500 tons.

The Barquentine has three or more masts and square sails on the fore and aft masts with the main mast had topmast and gaff sails and these had been stripped down to facilitate operation by a slimmer crew and basic rig.

The Barquentine sailed the waters of Northern Europe which were dominated by variable wind speeds and they were popularly used to carry lumber from Scandinavia and Germany to England and the Baltic Areas.

5. The Xebec

The xebec

The Xebec, also known as " Zebec ", a name derived from the Arabic word for "Small Ship", was a sailing ship built in the 16th to mid-19th century that was used mainly for moving cargo.

The Xebec sailing vessel held between 90 and 400 crew and was 103ft 9 inches in length with a tonnage of between 200 - 300 tons ( 10 ) and they were very agile and popular with European navies.

The features of the Xebec are listed below.

  • Long-prow bulkheads
  • Narrow elongated hulls
  • Huge lateen yards
  • One aft-set mizzen mast
  • 3 lateen-pillared masts, both raked forward and having a single triangular sail

Their shallow draft and lateen rig allowed for a closer pinch to the wind allowing them to flee quickly or turn around and fire a broadside volley quickly.

After a lot of engineering experiments, the Xebec gave rise to the Polacre-Xebec, which replaced the mizzen mast. The mainmast of the new derivative also had a square rig and these new vessels were light and could not carry a heavy load with the shallow draft and low free-board making them unsuitable for open-seas sailing.

6. The Barque

The barque ship

The barque, also referred to as " barc " or " bark ", is a sailing ship first introduced in the 15th century ( 11 ) with 3 or more masts with square sails on all masts, except the aft or mizzen mast. It could carry approximately 500 tons and could hold a crew of 100 people.

Although they are quite similar, the barque should not be confused with the Schooner Bark which is a different vessel.

The Barque ship was commonly used by traders to carry extremely high volumes of cargo from Australia to Europe with cargo mainly consisting of Nitrates and Guano destined for the Western South American coast and they were popular in the period prior to the start of World War II.

7. The Clipper

the clipper ship

A clipper was a sailing vessel introduced in the mid-19th century that was mainly used as a merchant ship for transporting goods and it was designed for speed.

Clipper ships ranged in size from a few hundred tons to over 4000 tons ( 12 ) and they all had a narrow build, a protruding stern, 3 to 5 masts for speed, and a square rig.

They were most commonly used by British and American traders to ship goods from China to their countries and they were also used to ferry Gold and Tea back to Great Britain and the Americas.

Famous clipper ships are listed below.

  • Cisne Branco : This is a steel-hulled built like the original clipper. It is used as a training vessel by the Brazilian navy to this day
  • Race Horse : This clipper ship set the record of getting from New York to San Francisco in 109 days in 1850 which was a record at that time
  • Marco Polo : This clipper vessel was the first boat of the time to make around trip between England & Australia in under 6 months in 1852

8. The Windjammer

the windjammer

The Windjammer is a commercial sailing ship built in the 19th century with a capacity between 2,000 to 8,000 tons and the speed ranged from 14 to 21 knots ( 13 ).

It came with three to five square-rigged masts and it had a cost-effective extended hull that allowed for larger storage space.

It was a general-class merchant ship and was mainly used to transport bulky cargo and it ferried lumber, coal, and many other goods from one continent to another before evolving from carrying cargo to carrying passengers on cruises in later generations.

9. The Fluyt

The Fluyt sailing ship

The Fluyt, also known as " fleut " or " fluit " is a sailing ship that originated in the 16th century in the Dutch Republic with a weight between 200 and 300 tons, approximately 80 feet (24 meters) in length, and a crew capacity of 12 - 15 people ( 14 ).

The Fluyt has three squared-rigged masts and was primarily used as a merchant ship to transport cargo.

It was lightly fortified, had a small stern and extended box-style structure, and was crafted using specialized tools to reduce the costs of production and make them affordable to merchants.

10. The Fully-Rigged Ship

The Fully-Rigged Ship

A fully rigged ship, also referred to as a "full-rigged ship", is a sailing ship with three or more masts, with all of the masts being square-rigged and the rig, hull, mast, and yards made of iron, wood, or steel.

A full-rigged ship weighed an average 325 tons and could carry a crew of up to 36 people and these ships required a larger crew because of their fully rigged construction ( 15 ).

During the 18th century, a full-rigged ship was also referred to as a " frigate " and they were mainly used for patrolling and for attacking.

A full-rigged ship weighed an average 325 tons and could carry a crew of up to 36 people ( 16 ).

However, towards the end of the 19th century, these ships were stripped down so they could be handled by a smaller crew which helped in easier handling of the sails during the monsoon period when winds would change speed and direction without any warning.

This helped in easier handling of the sails during the monsoon period when winds would change speed and direction without any warning.

A fully rigged ship masts from stern to bow consists of: ( 17 )

  • Mainmast : This is the tallest mast on the ship
  • Foremast : This is the second tallest mast on the ship
  • Mizzenmast : This is the third tallest mast on the sailing vessel
  • Jiggermast : If there is a 4th mast, it will be the jiggermast and will be the smallest mast on the ship

11. The Cutter

The Cutter

The cutter is a smaller sailing ship built in the early 18th century with a single mast rigged fore and aft and it varied in size from 20ft to 34 ft in length on average with a crew capacity of between 21 to 66 people ( 19 ).

A cutter sailing vessel features: ( 18 )

  • Narrow hull
  • 2 or more headsails
  • Decked sailcraft
  • Raking transom
  • Vertical stem
  • A gaff-rigged long bowsprit

This sailing ship was used for patrolling territorial waters and other enforcement activities during the 18th century and it was used to ferry soldiers and government officials because it was very fast and could outrun any enemy.

Modern-day cutters have a rugged appearance, are small and aptly fit into their intended purpose – speed and agility and the British Sailing Club still has open-oared cutters in their fleet of sailing ships.

12. The Yawl

The Yawl

A Yawl is a sailing ship that was originally that was originally a dutch ship nicknamed " Dandy " or " Jol " in Dutch built in the 19th century with a speed range from 10-14 knots, an average crew size of 25 people and a ship size ranging from 30ft to 75ft in length with beam sizes ranging from 10ft to 12ft.

They bore two fully-equipped masts and a fore-and-aft sail, a smaller jigger-mast and a mizzen mast that leans towards the rudder post of the ship with the mizzen sail in this case purposely designed to aid in balancing and trimming the ship on rough waters.

One famous yawl sailing ship is the Islander which was a 34ft yawl that Harry Pidgeon sailed around the world on. He was the second person in 1918 to sail around the world at that time.

13. The Brig

The Brig

The brig is a two-masted sailing ship that was originally built in the 18th century with square rigging on both masts and sometimes had a spanker on the aft mast.

The length of a brig varied from 75ft to 165ft with tonnages up to 480 ith tonnages up to 480 and it needed a crew of 22 people ( 20 ).

The brig was used as a war vessel and a cargo ship for transporting goods and they were later used to ferry large cargo on the open seas since they could easily follow the direction of the prevailing winds.

It came with a berthing deck that had sleeping quarters for cabin crew and marine officials, storage areas, a sail bin, a wood-paneled stove room, guns, and carronades.

They would be brought into the harbor without using tugs and could maneuver well in small areas.

Famous brig ships are listed below.

  • USS Argus : This was a United States Navy brig that fought in the First Barbary War, taking part in the blockage of Tripoli and the war of 1812
  • USS Reprisal : This was the first ship of the United States Navy
  • USS Somers : This was a brig in the United States Navy that became infamous for being the only US Navy ship to undergo a mutiny

14. The Ketch

The Ketch

A ketch is a two-masted sailboat that originated in the 17th century with most ketch ships ranging from 40ft to over 120ft in size and weighing between 100 and 250 tons. A ketch ship needed a smaller crew of only 4 people to operate ( 21 ).

The ketch looked just like the Yawl and as stated had two masts each having a fore-and-aft rig with the difference between the two being that the ketch had a mizzen mast placed on the taller mainmast but at a position in front of the rudder post. The mizzen in this case aided in maneuvering the vessel.

A ketch ship was used for:

  • Cargo Transportation

15. The Hulk

The Hulk

A hulk is an 18th-century ship that is a derivative of the Carrack with a weight of 400 tons that is afloat but incapable of going to sea. In maritime terms, the name "Hulk" was given to ships that were outdated, stripped down or unprofitable to run.

The bulk of the hulk fleet was comprised of abandoned ships, stripped down and therefore could not continue to ply across the Mediterranean Sea as cargo or transport ships.

They are stationary and kept for their buoyancy and were used as a prison, a place for gambling.

  • Maritime Museum Of The Atlantic. " Sailing Ship Rigs ".
  • The New York Times. " America's Cup Held Here Since 1851 ", PDF.
  • World History Encyclopedia. " Carrack Definition ," Paragraph 3.
  • Same As Reference 3
  • Military History. " Carracks, Famous Carracks ," Paragraph 9.
  • " Aken, tjalken en kraken " by Hans Haalmeijer & Dirk Adrianus Vuik, Page 12.
  • Google Books Ngram Viewer. " Brigantine ".
  • Gaspee Info. " Brigentines Described ," Paragraph 3.
  • Wikipedia. " Barquentine ," Paragraph 1.
  • " Ship: 5000 Years Of Maritime Adventure " by Brian Lavery, Page 137.
  • Oxford English Dictionary (Online Edition). " Barque ".
  • University of Houston. " No. 338 Clipper Ship ". Paragraph 2
  • Marine Insights. " Windjammer Sailing Ships: From Past to Present ". Paragraph 8
  • History Today. " Dutch Shipbuilding in the Golden Age ". Volume 34, No. 1
  • " The Story Of The Sea, Volume 1 " by Arthur Quiller-Couch, Page 20.
  • Whaling Museum. " Rigs Of Vessel, Ship ," Paragraph 1.
  • " A Dictionary of Sea Terms " by Anstead, A, Page 96.
  • Britannia. " Cutter, Sailing Craft ". Paragraph 1.
  • " The Boats Of Men Of War " by William May & Simon Stephens
  • Texas Navy Association. " Glossary Of Nautical Terms ". Page 1
  • National Museum Of American History. " Ship Model, Ketch ". Paragraph 1

Logo of website with a blue concept of a bot and the words Wind On Sails below

The Ultimate Guide to Sail Boat Designs: Exploring Sail Shape, Masts and Keel Types in 2023

WOS Team

  • June 4, 2023

Sail Boat Designs have changed over the years, image shows a historical sail boat with large masts and multiple sails

When it comes to sail boat designs, there is a wide array of options available, each with its own unique characteristics and advantages. From the shape of the sails to the number of masts and the type of keel, every aspect plays a crucial role in determining a sailboat’s performance, stability, and manoeuvrability. In this comprehensive guide, we will delve into the fascinating world of sail boat designs, exploring the various elements and their significance.

Table of Contents

The sail shape is a fundamental aspect of sail boat design, directly impacting its speed, windward performance, and maneuverability. There are several types of sail shapes, including:

1. Bermuda Rig:

The Bermuda rig is a widely used sail shape known for its versatility and performance. It features a triangular mainsail and a jib, offering excellent maneuverability and the ability to sail close to the wind. The Bermuda rig’s design allows for efficient use of wind energy, enabling sailboats to achieve higher speeds. The tall, triangular mainsail provides a larger surface area for capturing the wind, while the jib helps to balance the sail plan and optimize performance. This rig is commonly found in modern recreational sailboats and racing yachts. Its sleek and streamlined appearance adds to its aesthetic appeal, making it a popular choice among sailors of all levels of experience.

2. Gaff Rig:

The Gaff rig is a classic sail shape that exudes elegance and nostalgia. It features a four-sided mainsail with a gaff and a topsail, distinguishing it from other sail designs. The gaff, a horizontal spar, extends diagonally from the mast, providing additional area for the mainsail. This configuration allows for a taller and more powerful sail, making the Gaff rig particularly suited for downwind sailing. The Gaff rig offers a traditional aesthetic and is often found in vintage and classic sailboats, evoking a sense of nostalgia for a bygone era of maritime exploration. The distinctive shape of the Gaff rig, with its graceful curves and intricate rigging, adds a touch of timeless charm to any sailboat that dons this rig.

3. Lateen Rig:

The Lateen rig is a unique and versatile sail design that has been used for centuries in various parts of the world. It features a triangular sail that is rigged on a long yard, extending diagonally from the mast. This configuration allows for easy adjustment of the sail’s angle to catch the wind efficiently, making the Lateen rig suitable for a wide range of wind conditions. The Lateen rig is known for its ability to provide both power and maneuverability, making it ideal for small to medium-sized sailboats and traditional vessels like dhow boats. Its versatility allows sailors to navigate narrow waterways and make tight turns with ease. The distinctive silhouette of a sailboat with a Lateen rig, with its sleek triangular sail and graceful curves, evokes a sense of adventure and a connection to seafaring traditions from around the world.

Number of Masts

The number of masts in a sail boat design affects its stability, sail area, and overall performance. Let’s explore a few common configurations:

1. Sloop Rig:

The sloop rig is one of the most popular and versatile sail boat designs, favoured by sailors around the world. It consists of a single mast and two sails—a mainsail and a jib. The sloop rig offers simplicity, ease of handling, and excellent performance across various wind conditions. The mainsail, situated behind the mast, provides the primary driving force, while the jib helps to balance the sail plan and improve manoeuvrability. This configuration allows for efficient upwind sailing, as the sails can be trimmed independently to optimize performance. The sloop rig is commonly found in modern recreational sailboats due to its versatility, enabling sailors to enjoy cruising, racing, or day sailing with ease. Its streamlined design and sleek appearance on the water make it both aesthetically pleasing and efficient, capturing the essence of the sailing experience.

2. Cutter Rig:

The cutter rig is a versatile and robust sail boat design that offers excellent performance, especially in challenging weather conditions. It features a single mast and multiple headsails, typically including a larger headsail forward of the mast, known as the cutter rig’s distinguishing feature. This configuration provides a wide range of sail combinations, enabling sailors to adjust the sail plan to suit varying wind strengths and directions. The larger headsail enhances the boat’s downwind performance, while the smaller headsails offer increased flexibility and improved balance. The cutter rig excels in heavy weather, as it allows for easy reefing and depowering by simply reducing or eliminating the headsails. This design is commonly found in offshore cruising sailboats and has a strong reputation for its reliability and seaworthiness. The cutter rig combines versatility, stability, and the ability to handle adverse conditions, making it a preferred choice for sailors seeking both performance and safety on their voyages.

3. Ketch Rig:

The Ketch rig is a sail boat design characterized by the presence of two masts, with the main mast being taller than the mizzen mast. This configuration offers a divided sail plan, providing sailors with increased flexibility, balance, and versatility. The main advantage of the Ketch rig is the ability to distribute the sail area across multiple sails, allowing for easier handling and reduced stress on each individual sail. The mizzen mast, positioned aft of the main mast, helps to improve the sailboat’s balance, especially in strong winds or when sailing downwind. The Ketch rig is often favoured by cruisers and long-distance sailors as it provides a range of sail combinations suitable for various wind conditions. With its distinctive double-mast appearance, the Ketch rig exudes a classic charm and is well-regarded for its stability, comfort, and suitability for extended journeys on the open seas.

The keel is the part of the sail boat that provides stability and prevents drifting sideways due to the force of the wind. Here are some common keel types:

1. Fin Keel:

The fin keel is a popular keel type in sail boat design known for its excellent upwind performance and stability. It is a long, narrow keel that extends vertically from the sailboat’s hull, providing a substantial amount of ballast to counterbalance the force of the wind. The fin keel’s streamlined shape minimizes drag and enables the sailboat to cut through the water with efficiency. This design enhances the sailboat’s ability to sail close to the wind, making it ideal for racing and performance-oriented sailboats. The fin keel also reduces leeway, which refers to the sideways movement of the boat caused by the wind. This improves the sailboat’s ability to maintain a straight course and enhances overall manoeuvrability. Sailboats with fin keels are commonly found in coastal and offshore racing as well as cruising vessels, where stability and responsiveness are valued. The fin keel’s combination of performance, stability, and reduced leeway makes it a preferred choice for sailors seeking speed and agility on the water.

2. Full Keel:

The full keel is a design known for its exceptional stability and seaworthiness. It extends along the entire length of the sailboat, providing a continuous surface that adds substantial weight and ballast. This configuration offers significant advantages in terms of tracking and resistance to drifting sideways. The full keel’s deep draft helps to prevent leeway and allows the sailboat to maintain a steady course even in adverse conditions. Its robust construction enhances the sailboat’s ability to handle heavy seas and provides a comfortable ride for sailors on extended journeys. While full keel sailboats may sacrifice some manoeuvrability, their stability and predictable handling make them a popular choice for offshore cruising and long-distance voyages. The full keel design has stood the test of time and is often associated with classic and traditional sailboat aesthetics, appealing to sailors seeking reliability, comfort, and the ability to tackle challenging ocean passages with confidence.

3. Wing Keel:

The wing keel is a unique keel design that offers a combination of reduced draft and improved stability. It features a bulbous extension or wings on the bottom of the keel, which effectively increases the keel’s surface area. This design allows sailboats to navigate in shallower waters without sacrificing stability and performance. The wings create additional lift and prevent excessive leeway, enhancing the sailboat’s upwind capabilities. The reduced draft of the wing keel enables sailors to explore coastal areas and anchor in shallower anchorages that would be inaccessible to sailboats with deeper keels. The wing keel is particularly well-suited for sailboats in areas with variable water depths or tidal ranges. This keel design offers the advantages of increased manoeuvrability and improved performance while maintaining stability, making it a popular choice for sailors seeking versatility in a range of sailing environments.

In the vast world of sail boat designs, sail shape, number of masts, and keel types play pivotal roles in determining a boat’s performance and handling characteristics. Whether you’re a recreational sailor, a racer, or a cruiser, understanding these design elements can help you make informed choices when selecting a sailboat.

Remember to consider your specific needs, preferences, and intended use of the boat when choosing a sail boat design. Each design has its strengths and weaknesses, and finding the perfect combination will greatly enhance your sailing experience.

By gaining a deeper understanding of sail boat designs, you can embark on your next sailing adventure with confidence and make the most of the wind’s power.

Related Posts

Sailing Navigation equipment, a compass sat on top of a rope and a map

Sailing Navigation: Exploring Modern Techniques for Navigating the Seas in 2023

  • June 10, 2023

Sailing in Different Directions. Image showing a view down a boat with a winch in the foreground and the mast sails in the background

Sailing in Different Directions: Harnessing the Wind’s Power in 2023

Sailboats sailing towards the horizon

Sailing Terms Demystified: A Comprehensive Guide to 14 Common Sailing Terminology

  • May 28, 2023

Nomadic Sailing

The Definitive Guide to Sailboat Hull Types

Catamaran

If you’ve ever been on a sailboat or any kind of boat, one of the first parts of the boat you saw was its hull and you might not have even known it.

Simply put, the hull is the bottom part of a boat that rides in and on top of the water. When a sailboat is underwater, it’s accompanied by the keel and the rudder.

Just like knowing the different types of sails , knowing the hull type on your sailboat means you’ll have a better understanding of how your boat operates while it’s out on the water.

All in all, the hull of any boat is meant to keep the boat afloat and to ensure minimum resistance against the water while being propelled forward. Now let’s dive into the different sailboat hull types and even some other types of hulls in boats in general!

Main Sailboat Hull Types

There are two main hull types that we’ll be looking at that encompass the many other types of hulls that vary from these two main types.

Depending on the type of boat you have, you’ll be floating around with one or the other. We’ll take a look at what you can expect if your boat has either of these hull types.

Displacement Hulls

The most common sailboat hull type you’ll find out there is the displacement hull, which is very effective at pushing the water aside and powering through it during forward propulsion.

A displacement hull is often found not only on sailboats, but also fishing, freight, cruise, and other larger boats.

All boats that have a displacement hull will be limited in their speed based on the waterline length of the hull. Regardless of how much power you use, whether it’s from the wind or motor, the maximum speed can’t be increased.

This is why you’ll see people mention the waterline length of a boat’s hull when putting them on the market to sell.

The big advantage of having a displacement hull is that they require far less power to get moving across the water compared to the other main hull type; the planing hull.

What this means is that your boat will be able to cruise for a long time with the same amount of energy, which also allows you to carry more items on board.

Planing Hulls

It’s almost guaranteed that your sailboat won’t have a planing hull since they’re most commonly found on powerboats and personal watercrafts (PWCs), like jet skis.

Planing hulls allow the boat to lift itself out of the water, reducing drag and increasing the speed of the boat.

Almost any boat that’s equipped with a planing hull will be able to attain a speed much greater than a boat with a displacement boat.

The main reason for this is the lift that’s produced when traveling at high speeds which reduces drag on the water.

The maximum speed of a boat with a planing hull is dependent on the horsepower of the engine and how much of the hull can be removed from the water while still cruising.

The biggest advantage of having a planing hull is that your boat will be able to pick up speed quickly and reach a greater maximum speed.

This allows for shorter journey times. However, there needs to be a source of all that energy, which comes directly from a combustion engine. The faster a boat with a planing hull goes, the larger the cost of fuel will be.

How Planing Works

The way planing works is actually pretty interesting, so I thought I’d dive into it a bit. Even though a sailboat is virtually guaranteed not to have one, it’s always nice to know how other boats operate while out on the water.

1. Displacement

Before a boat with a planing hull actually planes, it starts out acting like a displacement hull.

As a matter of fact, a boat with a planing hull needs to reach a certain speed before it starts to produce lift. Before that happens, it’s essentially a displacement hull.

While a boat with a planing hull is picking up speed and lifting itself out of the water, it’s in a plowing mode.

You’ll know when a boat is in plowing mode when the bow of the boat is elevated and the boat is throwing a relatively large wake. The goal, however, is to move from plowing mode to planing mode, which requires further acceleration.

Once the boat with a planing hull reaches a certain speed, it’ll leave plowing mode and enter planing mode.

As I already described, planing is when the hull is gliding across the water with a smaller amount of the hull dragging in the water when compared to the previous modes. Different boats will start planing when reaching different speeds.

Common Sailboat Hull Styles

Now that we’ve gone over the two main types of hulls you’ll find in sailboats and other types of boats, we have a good foundation for the hull styles you’ll commonly see when out on the water.

There are three main hull styles that you’ll see quite often, so let’s take a look at those.

sailboat with three sails

By far the most common hull style you’ll see on sailboats is the monohull, which is simply a single hull.

Traditionally, a sailboat will have a monohull and they can be found all over the place. It’s probably the style of hull that comes to most peoples’ mind when imagining a sailboat.

Monohulls on sailboats are virtually all displacement hulls. As we went over previously, this allows your sailboat to cruise for long stretches and has a greater efficiency compared to planing hulls.

However, most boats that exist on planet earth are monohulls, including powerboats, which can also be of the planing hull type.

When it comes to a monohull on a sailboat, the only way it can keep its stability is to have a proper keel attached to it.

A keel is a wing-like object that sticks out of the bottom of the hull in the water and provides a sailboat with ballast for stability. It’s important to understand how a keel works when operating a sailboat with a monohull since it’s one of the main reasons a sailboat can move forward without tipping.

sailboat with three sails

There are certainly a lot of monohull sailboats out there, but there’s no doubt that you’ll also see your fair share of catamarans.

Catamarans are sailboats with two hulls and operate quite differently than their monohull cousin. Catamarans are known to be fast and are likely to outrun most monohull sailboats.

Unlike monohull sailboats, catamarans can be fitted with displacement hulls as well as planing hulls. However, even if they have a planing hull they can still produce a relatively good amount of cruising time and do so rather efficiently.

Catamarans are a bit different than monohulls in the sense that they can reach greater speeds. There are several reasons for this. For one, a catamaran doesn’t need a ballast for stability since the broad stance between the two hulls provides enough stability.

This means there’s no need for a large, heavy keel. Second, they’re often built out of lightweight materials that allow the boat to reach a higher maximum speed compared to heavier sailboats.

Also, if a catamaran has a planing hull, it’ll have the ability to produce lift resulting in reduced drag on the water and even greater speeds.

Unfortunately, catamarans do have the disadvantage of being more likely to capsize in unwanted high-wind situations.

Also, it’s very difficult for a catamaran to recover from capsizing as opposed to a monohull sailboat that has a good ballast from its keel.

sailboat with three sails

You might have already guessed from the name, but I’ll state the obvious anyway. A trimaran is exactly like a catamaran but with three hulls instead of two.

Often times you’ll see a trimaran look like a monohull sailboat with a pair of hulls attached to its side.

Similar to a catamaran, trimarans can hit speeds much greater than your average monohull sailboat. As a matter of fact, they’re known to be “unsinkable” under the situation that the hulls on the port and starboard side of the central hull are completely filled up with water.

One of the coolest aspects of having a trimaran is that when it has a planing hull and/or a hydrofoil, the trimaran’s central hull will lift completely out of the water.

This gives it the effect that it’s floating across the air, which is the result of lift produced from the planing hull or a hydrofoil. It’s very cool to see this!

Sailboat Hull Bottoms

Apart from the main boat hull styles, like the monohull, catamaran, and trimaran, there are hull bottoms that pop up in the world of boating that can differ in style and function.

These hull bottoms are more of a deeper look at the hulls of a monohull, catamaran, or trimaran, so you can think of them more as a feature of any of the previously mentioned styles of hull.

Flat Bottom

sailboat with three sails

A very common hull bottom for boats that are derived from the planing hull type is a flat bottom hull.

The flat bottom hull is considered to be one of the less stable styles of hulls, especially when confronted with rough waters.

However, you’ll often find them on boats that don’t necessarily ride in these situations, including fishing or taxi areas.

  • Good for small lakes and rivers due to having a shallow draft.
  • Able to hit relatively high speeds once entering planing mode.

Disadvantages

  • Not good at handling choppy waters resulting in a rough ride.

Round Bottom

sailboat with three sails

When it comes to sailboats, you’re most likely going to run into monohull sailboats that have a displacement style hull with a round bottom.

While these are the most common hull bottom for sailboats, they can also be found on smaller boats that are used for fishing, canoeing, and other similar kinds of boats.

  • Easily moves through the water due to being a displacement hull type.
  • When accompanied by a keel, it produces a great amount of stability from the ballast.
  • Without a keel, it can roll when entering and exiting the boat as well as when waves are present.
  • Less maneuverable compared to other hull styles.

Deep ‘V’ Bottom

sailboat with three sails

If you’re operating a powerboat, then in all likeliness your boat has a planing hull with a deep ‘V’ bottom.

Since deep ‘V’ bottoms are found on planing hulls, these types of boats will be able to pick up speed quickly and at high maximums. This is the most common setup for powerboats out on the water.

This is the most common type of powerboat hull. This hull type allows boats to move through rough water at higher speeds and they provide a smoother ride than other hull types.

  • Provides a smooth ride compared to its flat bottom rival.
  • Good at handling rough water.
  • Requires more power to plane compared to its flat bottom rival.
  • Cannot handle sharp turns very well resulting in potential rolling or banking.

Multi-Chine Bottom

We took a good look at multi-hull styles like the catamaran and the trimaran earlier, which are the exact style of hulls that have a multi-chine bottom.

A multi-chine bottom is a great example of a displacement hull on either a catamaran or trimaran as it’s the most common bottom you’ll find.

  • In a multi-hull boat, it has a great amount of stability due to its wide beam.
  • In a multi-hull boat, it needs a large area when either tacking or jibing.

Main Parts of a Sailboat Hull

There’s some terminology I threw around while describing the many types of hulls a sailboat and other types of boats have.

As is the case with a lot of activities, learning the terminology is just something you have to do.

Thankfully, the terminology will eventually sink in overtime and eventually you’ll be able to ring off any hull terminology that comes up.

The bow is simply the most forward part of a sailboat and, thus, the very front of the hull.

The stern, conversely to the bow, is the most backward part of a sailboat and, thus, the very end of the hull.

The port side of a hull is the left side. I always remember this with the phrase “I left my port on the table”, with the port being wine.

This just so happens to also be the side where boats will have a red light turned on at night, which is the color of port wine.

The starboard side of a hull is on the right side.

Opposite the port side, in the evening boats will have a green light turned on and will be located on the starboard side of the boat.

Fore is a sailor’s way of saying “forward”.

Aft is a sailor’s way of saying “back”.

A transom is the aft-most (see what I did there?) section of the boat that connects the port and starboard sections of the boat.

The flare of a hull is where the hull starts to form a large angle the closer the hull gets to the deck.

The waterline is the line around the hull where the water touches when under a normal load.

Waterline Length

The waterline length, once referred to as the Load Waterline Length (LWL), is the length of the hull where the waterline is located.

This is not the entire length of the boat.

Length Overall (LOA)

The length overall (LOA) is, you guessed it, the overall length of the boat. This is measured from the tip of the bow to the end of the stern.

The freeboard is the space on the hull of a boat above the waterline and below the deck.

The draft is the length from the bottom-most part of a boat (the tip of the keel on a sailboat) and the waterline.

Get the very best sailing stuff straight to your inbox

Nomadic sailing.

At Nomadic Sailing, we're all about helping the community learn all there is to know about sailing. From learning how to sail to popular and lesser-known destinations to essential sailing gear and more.

Quick Links

Business address.

1200 Fourth Street #1141 Key West, FL 33040 United States

Copyright © 2024 Nomadic Sailing. All rights reserved. Nomadic Sailing is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means to earn fees by linking to Amazon.com and affiliated sites.

Better Sailing

Best Sailboats with 3 Cabins

Best Sailboats with 3 Cabins

Are you looking for chartering or buying a new or used 3-cabin sailboat? Do you want to sail around the world with your family, friends, or partner? Nowadays, there are a lot of spacious and reliable 3-cabin sailboats that can serve your needs and preferences. Always remember to conduct thorough research before buying a sailboat in order for you to live or sail on it with adequate comfort and space. Choosing a well-designed, robust, spacious, and seaworthy sailboat is the key to successful passagemaking. So, are you looking to accomplish your dream and sail overseas with a 3-cabin sailboat? Then, continue reading this article. I’m going to list the best 3-cabin sailboats to live on and travel overseas as well as their characteristics. Follow me!

For more than four decades the Amel brand has managed to build robust and reliable long-range cruising yachts. The Amel 55 ensures a comfortable motion while sailing and her long waterline length offers great speed potential. Moreover, she provides excellent protection on deck because of her wheel shelter at the end of the cockpit as well as ample space in the cockpit area. As for the rigging, the cutter headed ketch rig is fully furling, and has electric reefing on the mainsail, genoa, and a set of electric sheet winches. Another great characteristic is that she has double bow rollers which allow two anchors to be carried on the bow. The saloon has a huge table with wrap-around seating, plenty of handholds, and enough space for stowage.

Furthermore, she has a three-cabin layout; forward is situated the main cabin with enough headroom, and aft you can choose either a huge stateroom or a pair of cabins with double or side-by-side beds. Lastly, forward, aft and main bulkheads are watertight with rubber seals on the door and have a strongback so as to close firmly. All these amenities, space, easy-handling, and excellent performance while sailing, should be considered by anyone planning long-term cruising.

Amel 55 - Best Luxury Sailboat with 3 Cabins

Elan Impression 40.1

This sailboat is widely popular in the charter market. She offers great volume aft that allows for extra storage under the helmsman seats and has extra space forward in the cockpit. The rig features a powerful overlapping headsail which is the main driving force behind the sailboat when the engine is off. Moreover, she has a simple overall set-up which makes her easy to handle. The interior layout features a linear affair running down the starboard side including a large fridge. To port, there’s a very large convertible saloon sofa as well as a chart table.

Furthermore, there’s a double berth forward and a bunk room just to port with the heads/shower to starboard. So, you benefit from a larger double berth with heads to port and a separate shower room to starboard. Lastly, you can choose between four different cabin layouts; for the 3-cabin layout, there are two roomy cabins aft and an en-suite forward cabin with enough storage under the bed.

Oceanis 40.1

The 39ft Oceanis 40.1 offers plenty of deck volume, interior space and ensures high performance while sailing. She is available in different layouts, draughts, and rigs, so as to satisfy each sailor’s needs and preferences. A spacious family cruiser, with a wide cockpit, and enough speed without minimizing her capabilities in terms of performance and handling. She has the standard in-mast furling mainsail and as well as an optional genoa and a standard self-tacking jib. Below, there’s a big saloon, a C-shaped galley, a double cabin forward, and one double cabin or two cabins aft with bunk beds. So, you have all amenities to satisfy a family’s needs. A comfy cockpit, a spacious saloon, 3 roomy cabins, and a large practical galley for use in port. You can buy a new Oceanis 40.1 for $257,400 and even schedule a test drive through the company’s website.

Oceanis 40.1 - 3 Cabin Sailboat

Jeanneau Sun Odyssey 36i

This high-performance cruiser with her exceptional hi-tech construction ensures powerful offshore sailing. With her fractional rig, high-aspect blade rudders, 3rd generation hull construction, and perfectly capable of sailing upwind, she’s a classic example of a modern performance cruiser. You can select the 3-cabin option, aft cabin with a double bed and the other two with bunks or doubles. The central saloon has clever design touches with a removable dining table leaf to seat and extra settee space. Also, a big L-shaped galley at the foot of the companionway, to starboard, and the head and shower stall just opposite, to port. As you can see the boat’s overall appeal offers great amenities along with excellent sailing performance.

Jeanneau Sun Odyssey 36i Budget 3 Cabin Sailboat

This is a 39ft 3-cabin sailboat adequate for 6 or 8 persons. She has a wide and straight hull as well as a spacious cockpit that provides enough space to move around, relax, and dine outdoors. On the stern, there’s a platform that is located lower to the hull of the ship. The platform is separated from the cockpit with a bench below and is very easy to lower and raise, as well as store items and additional equipment. Furthermore, you can choose between three different types of interior or 2 different cabin layouts. She has a modern and functional interior equipped with comfy furniture. Due to her abundant space below deck, the sailboat can offer a three-bath double cabin layout or 3 small but comfortable cabins with enough headroom.

This sailboat is carefully designed so as to ensure comfort and a spacious interior to live in. The layout of Hunter 38 has an L-shaped galley to starboard at the foot of the companionway, a nav station to port, and a dining area amidships. Moreover, the salon has a 6’6” headroom and the galley has a fridge, a sink, a stove/oven, and cabinets for storage. The V-berth and both aft cabins can accommodate 2 people each. Also, all 3 cabins have hanging lockers and enough storage space. Also, the 2-compartment single head is connected with doors to both the main cabin and the aft stateroom. Her base price starts from $144,990 and is ideal for coastal cruising and family outings.

Hunter 38 3 Cabin Sailboat

Bavaria Cruiser 34

The Bavaria 34 has similar hull construction with her previous models 32 and 33. However, this one is more spacious and with a few new bits of restyled bodywork as well as more interior options. She’s generally responsive and enjoyable on the helm while sailing. Despite this, deck stowage around the cockpit is limited to just two depth lockers in the aft cockpit seating. But below deck, there’s a quite large saloon, big and functional galley with all basic amenities, and 3 roomy cabins. The option of three double cabins can accommodate a family of 6 and the port cabin offers a big head compartment. Lastly, she’s easy to sail and handle and ensures a great combination of quality and value. In other words, she’s like a home away from home!

Best Sailboats with 3 Cabins – Final Thoughts

These are some great 3-cabin sailboats adequate for either offshore sailing or just for coastal cruises and family outings. Remember that everything depends on some important factors that determine which 3-cabin sailboat is the right for you. These factors are your sailing routes, your budget, your needs, interior comforts, sailing performance, and your crew members. So, you need to consider everything before buying a new or used 3-cabin sailboat. For example, if you’re just sailing around a bay and anchoring a lot with your family, you don’t need a high-performance sailboat. On the other hand, if you’re sailing offshore for a long time and you have 5 more persons in your crew then you’d require a spacious, reliable, and fast sailboat. In any case, there’s a wide variety of different options out there to choose from and you’ll definitely find what you’re looking for. Bon voyage!

Peter

Peter is the editor of Better Sailing. He has sailed for countless hours and has maintained his own boats and sailboats for years. After years of trial and error, he decided to start this website to share the knowledge.

Related Posts

The Ultimate Guide to Choosing the Best Fishing Line for Trolling

The Ultimate Guide to Choosing the Best Fishing Line for Trolling

Lagoon Catamaran Review: Are Lagoon Catamarans Good?

Lagoon Catamaran Review: Are Lagoon Catamarans Good?

Best Inboard Boat Engine Brands

Best Inboard Boat Engine Brands

Are O’Day Sailboats Good? A Closer Look at a Classic Brand

Are O’Day Sailboats Good? A Closer Look at a Classic Brand

  • Buyer's Guide
  • Destinations
  • Maintenance
  • Sailing Info

Hit enter to search or ESC to close.

Sailboat Parts Explained: Illustrated Guide (with Diagrams)

When you first get into sailing, there are a lot of sailboat parts to learn. Scouting for a good guide to all the parts, I couldn't find any, so I wrote one myself.

Below, I'll go over each different sailboat part. And I mean each and every one of them. I'll walk you through them one by one, and explain each part's function. I've also made sure to add good illustrations and clear diagrams.

This article is a great reference for beginners and experienced sailors alike. It's a great starting point, but also a great reference manual. Let's kick off with a quick general overview of the different sailboat parts.

General Overview

The different segments

You can divide up a sailboat in four general segments. These segments are arbitrary (I made them up) but it will help us to understand the parts more quickly. Some are super straightforward and some have a bit more ninja names.

Something like that. You can see the different segments highlighted in this diagram below:

Diagram of the four main parts categories of a sailboat

The hull is what most people would consider 'the boat'. It's the part that provides buoyancy and carries everything else: sails, masts, rigging, and so on. Without the hull, there would be no boat. The hull can be divided into different parts: deck, keel, cabin, waterline, bilge, bow, stern, rudder, and many more.

I'll show you those specific parts later on. First, let's move on to the mast.

sailboat with three sails

Sailboats Explained

The mast is the long, standing pole holding the sails. It is typically placed just off-center of a sailboat (a little bit to the front) and gives the sailboat its characteristic shape. The mast is crucial for any sailboat: without a mast, any sailboat would become just a regular boat.

I think this segment speaks mostly for itself. Most modern sailboats you see will have two sails up, but they can carry a variety of other specialty sails. And there are all kinds of sail plans out there, which determine the amount and shape of sails that are used.

The Rigging

This is probably the most complex category of all of them.

Rigging is the means with which the sails are attached to the mast. The rigging consists of all kinds of lines, cables, spars, and hardware. It's the segment with the most different parts.

The most important parts

If you learn anything from this article, here are the most important parts of any sailboat. You will find all of these parts in some shape or form on almost any sailboat.

Diagram of Parts of a sailboat - General overview

Okay, we now have a good starting point and a good basic understanding of the different sailboat parts. It's time for the good stuff. We're going to dive into each segment in detail.

Below, I'll go over them one by one, pointing out its different parts on a diagram, listing them with a brief explanation, and showing you examples as well.

After reading this article, you'll recognize every single sailboat part and know them by name. And if you forget one, you're free to look it up in this guide.

Diagram of the Hull Parts of a sailboat

On this page:

The hull is the heart of the boat. It's what carries everything: the mast, the sails, the rigging, the passengers. The hull is what provides the sailboat with its buoyancy, allowing it to stay afloat.

Sailboats mostly use displacement hulls, which is a shape that displaces water when moving through it. They are generally very round and use buoyancy to support its own weight. These two characteristics make sure it is a smooth ride.

There are different hull shapes that work and handle differently. If you want to learn more about them, here's the Illustrated Guide to Boat Hull Types (with 11 Examples ). But for now, all we need to know is that the hull is the rounded, floating part of any sailboat.

Instead of simply calling the different sides of a hull front, back, left and right , we use different names in sailing. Let's take a look at them.

Diagram of the Hull Parts of a sailboat

The bow is the front part of the hull. It's simply the nautical word for 'front'. It's the pointy bit that cuts through the water. The shape of the bow determines partially how the boat handles.

The stern is the back part of the hull. It's simply the nautical word for 'back'. The shape of the stern partially determines the stability and speed of the boat. With motorboats, the stern lies deep inside the water, and the hull is flatter aft. Aft also means back. This allows it to plane, increasing the hull speed. For sailboats, stability is much more important, so the hull is rounded throughout, increasing its buoyancy and hydrodynamic properties.

The transom is the backplate of the boat's hull. It's the most aft (rear) part of the boat.

Port is the left side of a sailboat.

Starboard is the right side of a sailboat

The bilges are the part where the bottom and the sides of the hull meet. On sailboats, these are typically very round, which helps with hydrodynamics. On powerboats, they tend to have an angle.

The waterline is the point where the boat's hull meets the water. Generally, boat owners paint the waterline and use antifouling paint below it, to protect it from marine growth.

The deck is the top part of the boat's hull. In a way, it's the cap of the boat, and it holds the deck hardware and rigging.

Displacement hulls are very round and smooth, which makes them very efficient and comfortable. But it also makes them very easy to capsize: think of a canoe, for example.

The keel is a large fin that offsets the tendency to capsize by providing counterbalance. Typically, the keel carries ballast in the tip, creating a counterweight to the wind's force on the sails.

The rudder is the horizontal plate at the back of the boat that is used to steer by setting a course and maintaining it. It is connected to the helm or tiller.

Tiller or Helm

  • The helm is simply the nautical term for the wheel.
  • The tiller is simply the nautical term for the steering stick.

The tiller or helm is attached to the rudder and is used to steer the boat. Most smaller sailboats (below 30') have a tiller, most larger sailboats use a helm. Large ocean-going vessels tend to have two helms.

The cockpit is the recessed part in the deck where the helmsman sits or stands. It tends to have some benches. It houses the outside navigation and systems interfaces, like the compass, chartplotter, and so on. It also houses the mainsheet traveler and winches for the jib. Most boats are set up so that the entire vessel can be operated from the cockpit (hence the name). More on those different parts later.

Most larger boats have some sort of roofed part, which is called the cabin. The cabin is used as a shelter, and on cruising sailboats you'll find the galley for cooking, a bed, bath room, and so on.

The mast is the pole on a sailboat that holds the sails. Sailboats can have one or multiple masts, depending on the mast configuration. Most sailboats have only one or two masts. Three masts or more is less common.

The boom is the horizontal pole on the mast, that holds the mainsail in place.

The sails seem simple, but actually consist of many moving parts. The parts I list below work for most modern sailboats - I mean 90% of them. However, there are all sorts of specialty sails that are not included here, to keep things concise.

Diagram of the Sail Parts of a sailboat

The mainsail is the largest sail on the largest mast. Most sailboats use a sloop rigging (just one mast with one bermuda mainsail). In that case, the main is easy to recognize. With other rig types, it gets more difficult, since there can be multiple tall masts and large sails.

If you want to take a look at the different sail plans and rig types that are out there, I suggest reading my previous guide on how to recognize any sailboat here (opens in new tab).

Sail sides:

  • Leech - Leech is the name for the back side of the sail, running from the top to the bottom.
  • Luff - Luff is the name for the front side of the sail, running from the top to the bottom.
  • Foot - Foot is the name for the lower side of the sail, where it meets the boom.

Sail corners:

  • Clew - The clew is the lower aft (back) corner of the mainsail, where the leech is connected to the foot. The clew is attached to the boom.
  • Tack - The tack is the lower front corner of the mainsail
  • Head - The head is the top corner of the mainsail

Battens are horizontal sail reinforcers that flatten and stiffen the sail.

Telltales are small strings that show you whether your sail trim is correct. You'll find telltales on both your jib and mainsail.

The jib is the standard sized headsail on a Bermuda Sloop rig (which is the sail plan most modern sailboats use).

As I mentioned: there are all kinds, types, and shapes of sails. For an overview of the most common sail types, check out my Guide on Sail Types here (with photos).

The rigging is what is used to attach your sails and mast to your boat. Rigging, in other words, mostly consists of all kinds of lines. Lines are just another word for ropes. Come to think of it, sailors really find all kinds of ways to complicate the word rope ...

Two types of rigging

There are two types of rigging: running and standing rigging. The difference between the two is very simple.

  • The running rigging is the rigging on a sailboat that's used to operate the sails. For example, the halyard, which is used to lower and heave the mainsail.
  • The standing rigging is the rigging that is used to support the mast and sail plan.

Standing Rigging

Diagram of the Standing Riggin Parts of a sailboat

Here are the different parts that belong to the standing rigging:

  • Forestay or Headstay - Line or cable that supports the mast and is attached to the bow of the boat. This is often a steel cable.
  • Backstay - Line or cable that supports the mast and is attached to the stern of the boat. This is often a steel cable.
  • Sidestay or Shroud - Line or cable that supports the mast from the sides of the boat. Most sailboats use at least two sidestays (one on each side).
  • Spreader - The sidestays are spaced to steer clear from the mast using spreaders.

Running Rigging: different words for rope

Ropes play a big part in sailing, and especially in control over the sails. In sailboat jargon, we call ropes 'lines'. But there are some lines with a specific function that have a different name. I think this makes it easier to communicate with your crew: you don't have to define which line you mean. Instead, you simply shout 'mainsheet!'. Yeah, that works.

Running rigging consists of the lines, sheets, and hardware that are used to control, raise, lower, shape and manipulate the sails on a sailboat. Rigging varies for different rig types, but since most sailboats are use a sloop rig, nearly all sailboats use the following running rigging:

Diagram of the Running Rigging Parts of a sailboat

  • Halyards -'Halyard' is simply the nautical name for lines or ropes that are used to raise and lower the mainsail. The halyard is attached to the top of the mainsail sheet, or the gaffer, which is a top spar that attaches to the mainsail. You'll find halyards on both the mainsail and jib.
  • Sheets - 'Sheet' is simply the nautical term for lines or ropes that are used to set the angle of the sail.
  • Mainsheet - The line, or sheet, that is used to set the angle of the mainsail. The mainsheet is attached to the Mainsheet traveler. More on that under hardware.
  • Jib Sheet - The jib mostly comes with two sheets: one on each side of the mast. This prevents you from having to loosen your sheet, throwing it around the other side of the mast, and tightening it. The jib sheets are often controlled using winches (more on that under hardware).
  • Cleats are small on-deck hooks that can be used to tie down sheets and lines after trimming them.
  • Reefing lines - Lines that run through the mainsail, used to put a reef in the main.
  • The Boom Topping Lift is a line that is attached to the aft (back) end of the boom and runs to the top of the mast. It supports the boom whenever you take down the mainsail.
  • The Boom Vang is a line that places downward tension on the boom.

There are some more tensioning lines, but I'll leave them for now. I could probably do an entire guide on the different sheets on a sailboat. Who knows, perhaps I'll write it.

This is a new segment, that I didn't mention before. It's a bit of an odd duck, so I threw all sorts of stuff into this category. But they are just as important as all the other parts. Your hardware consists of cleats, winches, traveler and so on. If you don't know what all of this means, no worries: neither did I. Below, you'll find a complete overview of the different parts.

Deck Hardware

Diagram of the Deck Hardware Parts of a sailboat

Just a brief mention of the different deck hardware parts:

  • Pulpits are fenced platforms on the sailboat's stern and bow, which is why they are called the bow pulpit and stern pulpit here. They typically have a solid steel framing for safety.
  • Stanchons are the standing poles supporting the lifeline , which combined for a sort of fencing around the sailboat's deck. On most sailboats, steel and steel cables are used for the stanchons and lifelines.

Mainsheet Traveler

The mainsheet traveler is a rail in the cockpit that is used to control the mainsheet. It helps to lock the mainsheet in place, fixing the mainsails angle to the wind.

sailboat with three sails

If you're interested in learning more about how to use the mainsheet traveler, Matej has written a great list of tips for using your mainsheet traveler the right way . It's a good starting point for beginners.

Winches are mechanical or electronic spools that are used to easily trim lines and sheets. Most sailboats use winches to control the jib sheets. Modern large sailing yachts use electronic winches for nearly all lines. This makes it incredibly easy to trim your lines.

sailboat with three sails

You'll find the compass typically in the cockpit. It's the most old-skool navigation tool out there, but I'm convinced it's also one of the most reliable. In any way, it definitely is the most solid backup navigator you can get for the money.

sailboat with three sails

Want to learn how to use a compass quickly and reliably? It's easy. Just read my step-by-step beginner guide on How To Use a Compass (opens in new tab .

Chartplotter

Most sailboats nowadays use, besides a compass and a map, a chartplotter. Chartplotters are GPS devices that show a map and a course. It's very similar to your normal car navigation.

sailboat with three sails

Outboard motor

Most sailboats have some sort of motor to help out when there's just the slightest breeze. These engines aren't very big or powerful, and most sailboats up to 32' use an outboard motor. You'll find these at the back of the boat.

sailboat with three sails

Most sailboats carry 1 - 3 anchors: one bow anchor (the main one) and two stern anchors. The last two are optional and are mostly used by bluewater cruisers.

sailboat with three sails

I hope this was helpful, and that you've gained a good understanding of the different parts involved in sailing. I wanted to write a good walk-through instead of overwhelming you with lists and lists of nautical terms. I hope I've succeeded. If so, I appreciate any comments and tips below.

I've tried to be as comprehensive as possible, without getting into the real nitty gritty. That would make for a gigantic article. However, if you feel I've left something out that really should be in here, please let me know in the comments below, so I can update the article.

I own a small 20 foot yacht called a Red witch made locally back in the 70s here in Western Australia i found your article great and enjoyed reading it i know it will be a great help for me in my future leaning to sail regards John.

David Gardner

İ think this is a good explanation of the difference between a ”rope” and a ”line”:

Rope is unemployed cordage. In other words, when it is in a coil and has not been assigned a job, it is just a rope.

On the other hand, when you prepare a rope for a specific task, it becomes employed and is a line. The line is labeled by the job it performs; for example, anchor line, dock line, fender line, etc.

Hey Mr. Buckles

I am taking on new crew to race with me on my Flying Scot (19ft dingy). I find your Sailboat Parts Explained to be clear and concise. I believe it will help my new crew learn the language that we use on the boat quickly without being overwhelmed.

PS: my grandparents were from Friesland and emigrated to America.

Thank you Shawn for the well written, clear and easy to digest introductory article. Just after reading this first article I feel excited and ready to set sails and go!! LOL!! Cheers! Daniel.

steve Balog

well done, chap

Great intro. However, the overview diagram misidentifies the cockpit location. The cockpit is located aft of the helm. Your diagram points to a location to the fore of the helm.

William Thompson-Ambrose

An excellent introduction to the basic anatomy and function of the sailboat. Anyone who wants to start sailing should consider the above article before stepping aboard! Thank-you

James Huskisson

Thanks for you efforts mate. We’ve all got to start somewhere. Thanks for sharing. Hoping to my first yacht. 25ft Holland. Would love to cross the Bass Strait one day to Tasmania. 👌 Cheers mate

Alan Alexander Percy

thankyou ijust aquired my first sailboat at 66yrs of age its down at pelican point a beautifull place in virginia usa my sailboat is a redwing 30 if you are ever in the area i wouldnt mind your guidance and superior knowledge of how to sail but iam sure your fantastic article will help my sailboat is wings 30 ft

Thanks for quick refresher course. Having sailed in California for 20+ years I now live in Spain where I have to take a spanish exam for a sailboat license. Problem is, it’s only in spanish. So a lot to learn for an old guy like me.

Very comprehensive, thank you

Your article really brought all the pieces together for me today. I have been adventuring my first sailing voyage for 2 months from the Carolinas and am now in Eleuthera waiting on weather to make the Exumas!!! Great job and thanks

Helen Ballard

I’ve at last found something of an adventure to have in sailing, so I’m starting at the basics, I have done a little sailing but need more despite being over 60 life in the old dog etc, thanks for your information 😊

Barbara Scott

I don’t have a sailboat, neither do l plan to literally take to the waters. But for mental exercise, l have decided to take to sailing in my Bermuda sloop, learning what it takes to become a good sailor and run a tight ship, even if it’s just imaginary. Thank you for helping me on my journey to countless adventures and misadventures, just to keep it out of the doldrums! (I’m a 69 year old African American female who have rediscovered why l enjoyed reading The Adventures of Robert Louis Stevenson as well as his captivating description of sea, wind, sailboat,and sailor).

Great article and very good information source for a beginner like me. But I didn’t find out what I had hoped to, which is, what are all those noisy bits of kit on top of the mast? I know the one with the arrow is a weather vane, but the rest? Many thanks, Jay.

Louis Cohen

The main halyard is attached to the head of the mainsail, not the to the mainsheet. In the USA, we say gaff, not gaffer. The gaff often has its own halyard separate from the main halyard.

Other than that it’s a nice article with good diagrams.

A Girl Who Has an Open Sail Dream

Wow! That was a lot of great detail! Thank you, this is going to help me a lot on my project!

Hi, good info, do u know a book that explains all the systems on a candc 27,

Emma Delaney

As a hobbyist, I was hesitant to invest in expensive CAD software, but CADHOBBY IntelliCAD has proven to be a cost-effective alternative that delivers the same quality and performance.

https://www.cadhobby.com/

Leave a comment

You may also like, guide to understanding sail rig types (with pictures).

There are a lot of different sail rig types and it can be difficult to remember what's what. So I've come up with a system. Let me explain it in this article.

Cruising yacht with mainsail, headsail, and gennaker

The Ultimate Guide to Sail Types and Rigs (with Pictures)

sailboat with three sails

The Illustrated Guide To Boat Hull Types (11 Examples)

sailboat with three sails

How To Live On a Boat For Free: How I'd Do It

sailboat with three sails

How To Live on a Sailboat: Consider These 5 Things

Own your first boat within a year on any budget.

A sailboat doesn't have to be expensive if you know what you're doing. If you want to learn how to make your sailing dream reality within a year, leave your email and I'll send you free updates . I don't like spam - I will only send helpful content.

Ready to Own Your First Boat?

Just tell us the best email address to send your tips to:

Yahoo!ニュース

現在JavaScriptが無効になっています

Yahoo!ニュースのすべての機能を利用するためには、JavaScriptの設定を有効にしてください。 JavaScriptの設定を変更する方法はこちら

BE:FIRST、ONE PIECE CARD GAME×BE:FIRST COLLABORATION SONG「Set Sail」先行配信決定

2/25(日) 14:05 配信

Billboard JAPAN

  BE:FIRSTが、4月24日リリースのニューシングルより最新曲「Set Sail」の先行配信を2月26日に開始することが決定した。 その他の画像   自身初のドーム公演も3分で完売し、その勢いは止まるところを知らないBE:FIRSTの2月26日リリースの2024年第一弾デシタルシングルはONE PIECE CARD GAME×BE:FIRST COLLABORATION SONGとして書き下ろした「Set Sail」。   数々のヒットソングを世に送り出しているプロデューサーUTAとTinyVoice Production所属のYohei、SKY-HIのコライトにより作り上げられたエモーショナルで力強いメロディー、疾走感溢れるトラックと、ONE PIECEカードゲーム好きを公言するSHUNTOとRYUHEIが作詞に参加し、ゲームファン、ONE PIECEファンなら分かる仕掛けを入れた言葉でゲームの世界観を表現したリリックが融合した、ファンクとロックがフューチャリスティックにミックスされたパッション溢れる楽曲となっている。   さらにYouTube「【公式】ONE PIECEカードゲーム チャンネル」からは「Set Sail」のスペシャルムービーが2月26日20時よりプレミア公開される。 ◎リリース情報 「Set Sail」 2024/2/26 DIGITAL RELEASE

  • BE:FIRSTがドコモ「ahamo」新TVCMでダンス披露、メイキングムービーも公開
  • BE:FIRST、コンセプトシングルを4月リリース 記念グッズやバンドル商品も登場
  • クリープハイプ、現メンバー15周年記念ページ&RYUHEI(BE:FIRST)/詩羽(水カン)ら選曲プレイリスト公開
  • SKY-HI/BE:FIRSTら集結【BMSG FES'23】DVD&BDが本日リリース
  • BE:FIRSTの映画『BE:the ONE』パッケージ化、特典映像は「Message -Acoustic Ver.-」フルや未公開映像など

アクセスランキング(エンタメ)

華原朋美「めっちゃ痩せましたね」最新ショット”美ボディー”に「可愛い」「綺麗」の声相次ぐ

sailboat with three sails

森尾由美「凄くびっくりした」という血液検査の結果を公表 「糖尿病の恐れ…あと0.2しかない」

sailboat with three sails

二宮和也 付き合い10年以上の仲良し女優「マジのお友達。おとといは家に遊びに来て」

sailboat with three sails

フィフィ 韓国を「日本の仮想敵国」と表現 経済支援の中止を強く訴え「韓国を支援する義理はない!」

sailboat with three sails

岩橋名指しの放送作家・前田政二氏 お笑いコンクールやらせ疑惑に否定投稿「二人の大きな勘違い」

sailboat with three sails

雑誌アクセスランキング(エンタメ)

もう終わってもいい長寿バラエティ番組 3位『世界仰天』2位『新婚さん』唯一100票超えの圧倒的1位は【500人に聞いた】

sailboat with three sails

投函したはずの郵便物が行方不明に…意外と知らない“ポストの仕組み”に「読んでゾッとした」の声

sailboat with three sails

「過去の離婚や彼氏のことも全部話している」“幼稚園児ホスト”で炎上したシングルマザー・ちいめろが明かす、子どもとの意外な関係

sailboat with three sails

「“間借りママ”としても活動」エンタ女芸人、千原ジュニアも認めるトーク力とブレイク後の今

sailboat with three sails

2023年度総決算「ガッカリしたドラマ」は?《フジテレビ編》1位は「昭和かよ」な恋愛ドラマ【500人にきいた】

sailboat with three sails

I've been on 50 cruises. Here are 3 routes I'd sail again in a heartbeat and 3 I'd probably skip.

  • I've been on 50 cruises (at least six a year), and some routes are better than others. 
  • I try to avoid cruises that make stops at Nassau and Freeport in the Bahamas.
  • My favorite cruise I've ever been on was a Mediterranean voyage from Barcelona. 

Insider Today

I've taken 50 cruises with family and friends, and I'm always looking to try out new routes with different port stops .

Before I ever book a cruise — which I do about six times a year — I try to find either a new-to-me ship or a new-to-me route. If neither of those options works for my budget or timeframe, I opt for a familiar favorite.

Here are my favorite cruise routes that I'm always happy to book, and the ones I don't need to sail again.

My favorite route is a Mediterranean cruise that starts and ends in Barcelona, Spain.

sailboat with three sails

Mediterranean cruises start and end in various ports of call around Europe, typically throughout the summer sailing season.

Last year, my family and I took a Disney Cruise that started and ended in Barcelona, with stops in France and Italy.

My favorite part of this trip was splitting a day between Nice and Eze in the French Riviera . I was able to walk through cobblestone streets overlooking the ocean while sipping on limoncello.

I love Caribbean cruises along the western ports.

sailboat with three sails

I've taken many western Caribbean routes over the years on Carnival Cruise Line and Disney Cruise Line, and they never disappoint.

The route usually includes stops at Cozumel, Mexico, and Georgetown, Grand Cayman. But it may also include ports of call at Falmouth, Jamaica; Costa Maya, Mexico; or Roatán, Honduras.

I always get off the ship in Cozumel, even if it's just to have lunch at a taco shop. Don't get lured into the restaurants right at the docks because the best food is in the spots farther down the main street.

I also love getting off in Roatán. On a recent cruise, I took an excursion to Roatan Island Brewing Company to try different beers made with local ingredients.

I also enjoy routes that only stop at private islands.

sailboat with three sails

Every once in a while, I can find a short three-night cruise on Royal Caribbean or Disney that only visits the brand's private islands.

These short cruises are ideal weekend getaways and go to some of my favorite ports of call, like Royal Caribbean's CocoCay and Disney's Castaway Cay.

I love both of these destinations because there's so much to do — you really can spend the entire day at the beach or exploring the various parts of the island. I also love that food and drinks are all provided, so I don't have to return to the ship for lunch.

On the other hand, I don't need to go to Nassau and Freeport in the Bahamas again.

sailboat with three sails

I love short cruises from Port Canaveral or Fort Lauderdale, Florida, but they often mean stopping at Nassau and Freeport in the Bahamas .

I don't really think there's much to see at either stop once you've done it once or twice. If my route includes them, I usually stay on the ship to enjoy the less crowded pool and spa.

The trade-off for these two ports is often getting to visit a cruise line's private island , so I think it's worth it for that. But I don't need to go on another long cruise through the Bahamas.

I'm also not a big fan of Bimini, Bahamas.

sailboat with three sails

Many cruise lines, like Carnival and Virgin Voyages , are now taking cruisers to Bimini for an easy beach day. But if you're not a big fan of chilling at the beach, there's not much else to do on the island.

I’d probably skip cruising to Key West.

sailboat with three sails

I love Key West in the Florida Keys , but as a port stop, it was hard to see a lot of the island and explore beyond Duval Street.

I'd prefer to spend a few days in the destination to explore all that it has to offer instead of making it a cruise stop.

sailboat with three sails

  • Main content
  • Order Status
  • Shipping & Delivery
  • Order Cancellation
  • Size Charts
  • Promotions & Discounts
  • Product Advice
  • Send Us Feedback

Popular Search Terms

  • Air Force 1

Top Suggestions

Sign in & use code MEMBER25. Not a Member? Use code GET20.

Look for Store Pickup at Checkout

Nike Invincible 3

Women's road running shoes.

Nike Invincible 3 Women's Road Running Shoes

Select Size

With maximum cushioning to support every mile, the Invincible 3 is our highest level of comfort underfoot. Its plush and bouncy ZoomX foam helps you stay stable and fresh. In other words—it's going to feel good all day, no matter what you're doing. And when you pair all this cushioning with easy-to-style colors, you get a shoe you never want to stop wearing.

  • Shown: Barely Volt/White/Pink Foam/Hyper Pink
  • Style: FZ3969-705

Shipping & Returns

Reviews (1).

Write a Review

Awesome shoe!

SamanthaS892266218 - Feb 09, 2024

Cute, great fit and super comfortable right out of the box. Wide forefoot too. No squished toes! Zoom X cushion A+++🧡🧡🧡

More Reviews

Complete the Look

 alt=

Support: High

The more supportive the shoe, the more stability it can give to your natural stride. A combination of tuned support and intentionally placed cushioning helps you feel secure with every step. The Invincible 3 has high support technology, with cushion and stability intentionally placed and shaped to help protect your foot from the effects of pronation.

Cushioning: Super High

The more cushioning that you have underfoot, the softer and more comfortable your running experience can be. Cushioning helps soften impact as your feet hit the ground. With Nike ZoomX cushioning shaped like a rocker and higher foam heights, this shoe is so soft and bouncy that just by putting it on you'll be excited for your next run. It provides ultimate cushioning at ground contact and an even softer underfoot feel for your workout and beyond.

Responsiveness: Super High

The more responsive the shoe, the more energy return you can get back with each step. Whether you want to run a little bit faster or with a little less effort, responsive shoes help give you slightly more spring in your step to get more out of your run. Nike ZoomX foam is ultra responsive and lightweight, giving you bounce and a snappy response with every step.

Fit: Secure, Breathable, Comfortable

An evolved Flyknit upper places zones of breathability where your foot heats up most. It's strong and durable, helping keep your foot secure with every mile.

What's New About the Invincible 3?

A wider midsole adds more stability than our previous iteration. Taller foam stacks than our previous version raise the bar on cushioning and comfort, in a more sleek-looking design. The strong plastic going around the heel is smaller than our previous iteration while still providing a secure, comfortable fit.

Product Details

COMMENTS

  1. The Ultimate Guide to Sail Types and Rigs (with Pictures)

    Most sailboats have one mainsail and one headsail. Typically, the mainsail is a fore-and-aft bermuda rig (triangular shaped). A jib or genoa is used for the headsail. Most sailors use additional sails for different conditions: the spinnaker (a common downwind sail), gennaker, code zero (for upwind use), and stormsail. Each sail has its own use.

  2. The Different Types of Sails On A Sailboat: An Easy Guide

    Jib Genoa Staysail Yankee Mizzen Sail Light-wind sails Spinnaker Gennaker Parasailor Code Zero Storm Sails Storm Mainsail Storm Jib Explaining the terms for the parts of a sail Head Leech Luff Battens Telltales Clew Tack Foot Traditional and less commonly seen sails Square sails Gaff Sails

  3. The Different Types Of Sails And When To Use Them

    As a general setup, sailboats will use three common sails, including headsail, mainsail, and specialty sail. Due to the varying wind conditions and the model of the sailboat, there are many types of sails including jib, genoa, trysail, storm jib, code zero, gennaker, and spinnaker.

  4. Sailing Terms: Sailboat Types, Rigs, Uses, and Definitions

    Trimaran - three hulls While monohull sailboats are more traditional and far more common, there are many performance advantages to catamaran and trimaran sailboats, including faster speeds and more stability. A monohull relies on ballast for stability. Catamarans and trimarans gain stability from the distance between their multiple hulls.

  5. Types of Sailboats: A Complete Guide

    The most common kind of sailboat is the sloop, as it's simple to operate and versatile. Other common sailboat types include the schooner, cutter, cat, ketch, schooner, catamaran, and trimaran. Other sailboat variations include pocket cruisers, motorsailers, displacement, and shoal-draft vessels.

  6. The Jib Sail Explained: A Complete Guide

    Most cruising boats today have a sail plan consisting of at least three sails: A mainsail, a headsail, and a light-wind sail. The Jib sail (along with its sister, the Genoa) is one of the most widely used headsails on modern sailboats in combination with a larger mainsail. It is very versatile and easy to use in different configurations ...

  7. Sail Rigs And Types

    Bermuda Rig - Also known as a Marconi rig, this is the typical configuration of most modern sailboats. It has been used since the 17th century and remains one of the most efficient types of rigs. The rig revolves around setting a triangular sail aft of the mast with the head raised to the top of the mast.

  8. Types of Sailboats

    Dinghies can have sails, such as the three-sailed variant consisting of the mainsail, jib and spinnaker. However, motor-powered dinghies are also commonly used especially as lifeboats onboard ships. Cutters are another class of sailboats that are medium-sized and generally have three sails. The mainmast on which the sails are mounted is located ...

  9. The 10 Most Common Sailboats and Rigs

    The Modern Sloop. The most common type of small-to-midsize sailboat is the sloop. The rig is one mast and two sails. The mainsail is a tall, triangular sail mounted to the mast at its leading edge, with the foot of the sail along the boom, which extends aft from the mast. The sail in front called the jib or sometimes the headsail, mounts on the ...

  10. What Are the Different Types of Sailboats

    A sailboat is a small to mid-sized boat that is powered by the use of sails, some more modern designs are also powered with a small motor, but this is not characteristic of most sailboats. The dual forces of hydrodynamic and aerodynamics combine to provide a sailboat with the ability to move through water.

  11. Sail Types: A Comprehensive Guide to 8 Types of Sails

    1. Mainsails The mainsail is the largest and most important sail. Therefore, it's probably the first sail to come to mind when you think of camping. Typically, it's situated directly behind the mast — connected to the boom — and uses wind energy to move the vessel.

  12. Types of Sailboats: Classification Guide

    There are three main hull types that you'll find in sailboats. Monohull: This is what most people think of when they think of a sail boat or any boat at all, really. A monohull sailboat has a single hulled structure that gives a boat that traditional boat shape we all instantly recognize.

  13. Different Sailboat Rigs Explained (Tall Ship, Gaff)

    https://improvesailing.com/sails - If you want to learn the rig sail types for sailboats, this video is for you. I've done a ton of research to learn how to ...

  14. The 15 Different Types of Sailing Ships

    1. The Schooner The Schooner sailing vessel, with an average size of 46m (152 feet) in length, was developed in the early 17th century and first used by the Dutch. The ship came with fore and aft sails and they were created to operate in the toughest of wind and ocean conditions.

  15. List of sailing boat types

    The following is a partial list of sailboat types and sailing classes, including keelboats, dinghies and multihull (catamarans and trimarans). Olympic classes Laser. Name Year of first construction Designer Builder Notes 470: 1963: André Cornu: Several: 49er: 1999: Julian Bethwaite: Several: 49er FX: 2010: Julian Bethwaite: Several:

  16. Names of Sails on a Sailboat

    Sails form a crucial part of the sailboat because without them, there's no starting up. For that reason, there are many details about different types of sails concerning their utility, functionality, fabrication materials, and performance. Simply put, each sail serves different purposes when out on the water.

  17. Three Sails

    A smooth, pure, British-style blend of Virginia tobaccos, Three Sails from Daughters & Ryan uses specially-selected, flue-cured gold leaf tobaccos and an ultra-fine cut to produce a pleasing smoke and presentation alike.

  18. The Ultimate Guide To Sail Boat Designs: Exploring Sail Shape, Masts

    The sail shape is a fundamental aspect of sail boat design, directly impacting its speed, windward performance, and maneuverability. There are several types of sail shapes, including: 1. Bermuda Rig: The Bermuda rig is a widely used sail shape known for its versatility and performance. It features a triangular mainsail and a jib, offering ...

  19. The Definitive Guide to Sailboat Hull Types

    Before that happens, it's essentially a displacement hull. 2. Plowing. While a boat with a planing hull is picking up speed and lifting itself out of the water, it's in a plowing mode. You'll know when a boat is in plowing mode when the bow of the boat is elevated and the boat is throwing a relatively large wake.

  20. Best Sailboats with 3 Cabins

    Buyer's Guide Best Sailboats with 3 Cabins By Peter 12 mins read Are you looking for chartering or buying a new or used 3-cabin sailboat? Do you want to sail around the world with your family, friends, or partner? Nowadays, there are a lot of spacious and reliable 3-cabin sailboats that can serve your needs and preferences.

  21. Sailboat Parts Explained: Illustrated Guide (with Diagrams)

    The mast is the pole on a sailboat that holds the sails. Sailboats can have one or multiple masts, depending on the mast configuration. Most sailboats have only one or two masts. Three masts or more is less common. Boom. The boom is the horizontal pole on the mast, that holds the mainsail in place. Sails

  22. BE:FIRST、ONE PIECE CARD GAME×BE:FIRST COLLABORATION SONG「Set Sail」先行配信

    BE:FIRSTが、4月24日リリースのニューシングルより最新曲「Set Sail」の先行配信を2月26日に開始することが決定した。 自身初のドーム公演も3分で ...

  23. I've been on 50 cruises. Here are 3 routes I'd sail again in a

    Here are 3 routes I'd sail again in a heartbeat and 3 I'd probably skip. Megan duBois. 2024-02-20T16:12:35Z An curved arrow pointing right. Share. The letter F. Facebook. An envelope. ...

  24. Australia Sail Grand Prix: Sydney

    Full Race and Event Results for the Australia Sail Grand Prix: Sydney Skip to Main Content. Christchurch 23 - 24 Mar 2024. 00. Days: 00. Hours: 00. Minutes: 00 ...

  25. Nike Invincible 3 Women's Road Running Shoes. Nike.com

    The Invincible 3 has high support technology, with cushion and stability intentionally placed and shaped to help protect your foot from the effects of pronation. Cushioning: Super High. The more cushioning that you have underfoot, the softer and more comfortable your running experience can be. Cushioning helps soften impact as your feet hit the ...