lancer 28 sailboat data

• New Sailboats
• Sailboats 21-30ft
• Sailboats 31-35ft
• Sailboats 36-40ft
• Sailboats Over 40ft
• Sailboats Under 21feet
• used_sailboats
• Apps and Computer Programs
• Communications
• Fishfinders
• Handheld Electronics
• Plotters MFDS Rradar
• Wind, Speed & Depth Instruments
• Anchoring Mooring
• Running Rigging
• Sails Canvas
• Standing Rigging
• Diesel Engines
• Off Grid Energy
• Cleaning Waxing
• DIY Projects
• Repair, Tools & Materials
• Spare Parts
• Tools & Gadgets
• Cabin Comfort
• Ventilation
• Footwear Apparel
• Foul Weather Gear
• Mailport & PS Advisor
• Inside Practical Sailor Blog
• Activate My Web Access
• Reset Password
• Customer Service

• Free Newsletter

Ericson 34-2 Finds Sweet Spot

How to Sell Your Boat

Cal 2-46: A Venerable Lapworth Design Brought Up to Date

Rhumb Lines: Show Highlights from Annapolis

Solar Panels: Go Rigid If You have the Space…

Leaping Into Lithium

The Importance of Sea State in Weather Planning

Do-it-yourself Electrical System Survey and Inspection

When Should We Retire Dyneema Stays and Running Rigging?

Rethinking MOB Prevention

Top-notch Wind Indicators

The Everlasting Multihull Trampoline

What Your Boat and the Baltimore Super Container Ship May Have…

Check Your Shorepower System for Hidden Dangers

DIY survey of boat solar and wind turbine systems

What’s Involved in Setting Up a Lithium Battery System?

The Scraper-only Approach to Bottom Paint Removal

Can You Recoat Dyneema?

How to Handle the Head

The Day Sailor’s First-Aid Kit

Choosing and Securing Seat Cushions

Cockpit Drains on Race Boats

Re-sealing the Seams on Waterproof Fabrics

Safer Sailing: Add Leg Loops to Your Harness

Waxing and Polishing Your Boat

Reducing Engine Room Noise

Tricks and Tips to Forming Do-it-yourself Rigging Terminals

Marine Toilet Maintenance Tips

Learning to Live with Plastic Boat Bits

• Sailboat Reviews

This maximum-size trailer sailer shows the compromises needed to haul a boat on the road.

Lancer Yachts was an offshoot of the remarkably complex and inbred family tree known as California boatbuilding. Lancer principals Dick Valdes and Maury Threinen founded Columbia Yachts back in the late 1950s, built boats under contract for Islander, sold Columbia to Whittaker, and got back into the sailboat business in 1974 by forming Lancer Yachts.

The names that passed through this Columbia connection read like a who’s who of fiberglass boatbuilding. Designer Bruce King was a draftsman for Columbia. Ericson founder Kurt Densmore was a Columbia plant manager, and Frank Butler—owner of Catalina Yachts, probably the biggest sailboat builder in the country—ran the Coronado division of Columbia.

It’s no wonder that many California-built boats from the 1970s bear a strong family resemblance: they’re practically first cousins.

Lancer Yachts built a rather astonishing variety of boats before going out of business in 1986. None of the Lancers can be considered a classic. Rather, the boats were a mirror of their times, and this constant change may have been what finally did in the company.

In 1983 alone, Lancer offered 13 different boats ranging in size from a 25′ trailer sailer to a 65′ motorsailer. The sheer variety of models reduces efficiency in production, and to stay competitive in price, you must shave profit margins closer and closer.

Perhaps the most interesting boats ever produced by Lancer were those in a series of high-performance motorsailers built in the mid-1980s. These boats ranged from the 25′ Powersailer up to the 65′ Motorsailer, and were characterized by huge engines relative to their displacements in an attempt to get both powerboat and sailboat performance out of the same hull. The Powersailer 27, for example, was designed for outboards of up to 200 hp. The 44′ high-performance motorsailer had engine options up to twin 200 hp turbocharged diesels.

The idea was to capture a crossover market which really wanted a powerboat, but felt that sailboats were the way to go due to real or imagined fuel shortages.

Needless to say, these boats had a somewhat limited appeal, and the return of cheap oil spelled their doom.

By comparison, the Lancer 28, built from 1977 to 1985, seems a rather tame and ordinary boat.

Part of the variety in the Lancer line stems from the use of a number of different designers. Most builders use a single designer or design team. Lancer was building designs by Bill Lee, C&C, Bruce Farr, and Shad Turner—all at the same time.

Turner designed both the 25 and 28, the smallest Lancers from 1977 to 1983. Both are shoal-draft fixed-keel trailerables. The 25 and 28 are attractive boats with short ends, flattish sheer, and Swan-type bubble deckhouses.

When the Lancer 28 entered production in 1977, trailer sailers were a hot item. And the more you could cram into a boat that could be towed behind your car, the better the consumer liked it.

Sailing Performance

In a lot of ways, the Lancer 28 is a good study in the compromises that are inherent in creating a relatively big boat that can be lugged around from place to place on a trailer. Sailing performance is one of those compromises.

Small boats get stability either from wide beam or deep, heavy keels. The Lancer 28 has neither.

To keep weight to a level that can be towed behind a car, trailerables such as the Lancer 28 tend to be lighter in weight and more lightly ballasted than boats of the same size designed to be kept in the water rather than taken home at the end of the day. The

Lancer 28’s 44% ballast/displacement ratio may sound high, but the actual amount of ballast—2200 pounds—is fairly low for a 28′ boat. By way of comparison, the Ranger 28, at about the same displacement, has 600 pounds more ballast.

It’s not just the weight of ballast that counts, it’s the location. Because of the Lancer 28’s shoal draft— less than 3’—the ballast cannot be located very far down. A fin keel 28-footer of the same displacement would draw 4′ or more, and have a correspondingly lower center of gravity.

What this means is that the Lancer 28 is tippy. Most owners in our survey consider the boat about average in stability, but in our experience, an “average” rating usually means a fairly tender boat.

The narrow 8′ beam doesn’t help stability, either. In many states 8′ is as wide as you can go without special trailering permits, so you find an awful lot of trailer sailers 8′ wide, no matter what their length.

The fixed keel of the Lancer 28 is a poor shape for windward performance. The keel is a hollow fiberglass box, with the cabin sole dropped down inside it. The keel is much wider than it should be for good performance, and its long, shallow shape does little as an efficient foil.

This is a boat that must be sailed upright. When the boat heels over, there is little to stop it from moving sideways. A centerboard would probably make a dramatic improvement in windward performance, but it was not an option.

Off the wind, performance is substantially better. Owners rate it average to above average in reaching and downwind performance.

The boat was built with both fractional and masthead rigs, with the fractional rig stepped further forward. The fractional boat should be better balanced, and is faster.

The Lancer 28 is no speed demon, with an average PHRF rating of 258 for the masthead version. The fractional rig is about 10 seconds per mile faster. By way of comparison, the Hunter 27 rates about 216, the Ericson 27 about 220, the Ranger 28 about 186, the Catalina 27 about 204. Any of these boats will chew up and spit out the Lancer 28.

You don’t buy this boat for speed. It’s a noncompetitive daysailer and weekend trailer cruiser.

Most Lancers under 30′ were powered by outboards, although inboard engines were frequently options. An inboard engine in the Lancer 28 adds several hundred pounds of weight to a boat that is already near the upper limit for trailering.

While most Lancer 28s have outboards, a number of different inboard engine configurations and models were used over the course of production, including

Petter, Renault and Yanmar diesels; a 10 hp gas inboard; and an OMC saildrive.

If the boat is really to be trailered, an outboard engine is preferable. An outboard can be flushed with fresh water after every cruise in salt water. The outboard and its fuel tank will come in at less than half the weight of any of the inboards. When the time comes to replace the engine, an outboard will cost about half what an inboard will cost, and you don’t have to worry about whether or not it will fit in the boat.

The outboard well in the stern of the Lancer 28 is pretty good. The engine stays in the water even in rough conditions, and the weight isn’t can’tilevered out over the stern to add to pitching moment. We’d be wary of purchasing a boat with a saildrive that has been used in salt water. A lot of owners are less than faithful about flushing out saildrives after each use, yet the innards are as vulnerable to corrosion as an outboard.

Likewise, parts for small diesel inboards are disproportionately expensive, and may be hard to find for any of the engines used in the boat except the Yanmar.

The inboard engine is tucked in a box under the companionway ladder, and owners rate the installation about average for accessibility.

A 10-horse outboard will move this boat along just fine, even in a chop. Take good care of it—flushing with fresh water after use in salt water—and an outboard will easily last for seven or eight years. Neglect it, and your first season may be its last.

Construction

To keep weight down for trailering, construction of the Lancer 28 is fairly light. To keep price down, finish detail is not particularly refined.

In its description of their fleet, Lancer described the 28 as bringing “real ocean-going capability to trailer boating.” We think you’d have to use a lot of imagination to consider this a boat for serious sailing in the ocean: the design and construction are those of a coastal cruiser and daysailer.

With the masthead rig, a compression column in the middle of the main cabin is required for under-deck support; the fractional rig utilizes the forward bulkhead.

Check for compression and stress cracks around either mast step.

The companionway dropboards are light plywood, and the companionway opening has so much taper that the boards can be removed by lifting them only a few inches. This may be convenient and give a lot of ventilation below, but it also means that the dropboards could fall out in a severe knockdown. The sliding companionway hatch is also wide, and not well sealed against boarding waves.

Several owners in our survey comment that the mast tabernacle is not strong enough, and that there is a lot of friction in the system when raising and lowering the mast.

The rig is quite tall—about 31′ above the top of the cabin with the masthead rig, and the fractional rig is taller still—so a lot of care is required in stepping and un-stepping the mast. That’s one trade-off with a maximum-size trailerable boat: you’re getting at the limit for easy rigging and unrigging without a fairly sophisticated tabernacle, which the boat doesn’t have.

Owner complaints about structural flaws include leaking hull-to-deck joints and leaking ports. Finding deck leaks is complicated by the vinyl headliner. Water may find its way along a circuitous route before it deposits itself on your head, and leaks may be next to impossible to trace. Look carefully for signs of drips and discoloration on the vinyl, particularly around every joint in the liner.

In general, there are numerous reports of deck leaks in our surveys. This is fairly common in relatively inexpensive mass-produced boats such as the Lancer 28, but it is a problem that can make your life miserable when cruising.

Although bottom blistering is usually less of a problem with trailerable boats than with boats kept in the water, several owners report blistering or other types of gelcoat flaws, such as crazing or stress cracks.

The Lancer 28 was designed in a time when it was fashionable to jam the maximum number of berths in the shortest possible overall boat length. It is true that there are six berths in the original version of this boat. It is also true that headroom at the aft end of the main cabin is 6′ 2″. However, just as the rooms in tract houses look a lot smaller in the flesh than they look in those wonderful wide-angle architectural photographs, the reality of the interior of the Lancer 28 is a little different from the promise.

Main cabin headroom comes from dropping the cabin sole 1′ into the keel stub. What this means is that you have a very long, narrow section of cabin sole over which there is reasonable headroom. But the effect is a little strange: you feel like you’re standing in a hole.

Frankly, this dropped cabin sole is a pretty mediocre idea. In the galley, where you could use the headroom, it’s not even easy to turn around because the dropped sole is so narrow. You’d be better off sitting on a little folding stool.

Without the dropped sole, headroom would be 5’2″ or so. You would have trouble selling that amount of headroom in a 28-footer, even a trailerable boat.

Forward, there is a narrow double berth with a storage locker below. In 1979, the forepeak berth was replaced in the Mark V version with a sail storage area. There is no provision for ventilation in this space. The bubble-type deckhouse fairs into the foredeck over the forward cabin, so there is reasonable sitting headroom over the berth. Actually, “cabin” is a misnomer: it is really just a berth, separated from the head by a bulkhead.

Just aft of the forward berth, a narrow head compartment spans the width of the boat. It gives you as much privacy as you can get in a trailer boat—which isn’t that much—and has a hatch overhead for ventilation. Some of these boats are equipped with self-contained toilets, while others have more conventional overboard-discharge toilets. Your sailing waters will dictate which arrangement you need.

There are two berths in the main cabin, On the port side is a conventional settee berth. On the starboard side, the dinette table drops to form a fairly wide berth, but don’t let anyone try to tell you it’s a double.

Dinettes don’t really work on narrow boats. You feel like you’re sitting in a narrow booth at the corner drugstore, which is fine if you happen to be a teenager—but not if you’re an adult. In this case, it’s a really tight squeeze for four people to fit into the dinette. On the other hand, it’s great seating for two.

Over the years, Lancer has actually done some pretty inventive things with interiors. Their boats had a California/European crossbred look that was always the talk of boatshow crowds, with wild colors and fabrics.

But the interior of the Lancer 28 is basically Neo-Padded Cell. Almost every surface is covered with either carpeting, upholstery, or padded vinyl.

Lancer isn’t the only builder guilty of this. Early Swans such as the Swan 43 were similarly padded.

It may seem like a good idea—if you get thrown against it you won’t get hurt—but we’ve never cared for the look of padding. Owning a boat is precariously close to insanity in any case: reminders of that when belowdecks are not particularly welcome.

The galley occupies both sides of the aft end of the main cabin, with a two-burner stove and lockers to port, and a sink, icebox and lockers to starboard. It’s quite workable.

Aft, there are quarterberths under both sides of the cockpit. They are very narrow at the foot. Your head and shoulders, however, are not stuffed under the cockpit, so the berths are not claustrophobic, although they are likely to be pretty hot in warm weather.

It’s not realistic to expect a lot of interior room in a hull as narrow as the Lancer 28. But the boat has a relatively long waterline, and the low-profile cabin trunk is also quite long, increasing the feeling of space.

Conclusions

The Lancer 28 is a maximum-size trailerable boat. The weight of about 5000 pounds will require a serious pulling vehicle if anything other than a once yearly trip to and from the launching ramp is planned.

Despite the six berths in the boat, we wouldn’t recommend it for four adults for anything longer than a weekend. For a young family with several children, the Lancer 28 could be seen as a floating camper.

The performance compromises that are a result of the shoal keel, high center of gravity and narrow beam have to be weighed against the fact that you can put the boat behind a big car or truck and take off for cruising areas that you might otherwise never reach with a 28′ boat.

If you really aren’t going to trailer the boat, there are a lot of other boats around 28′ long that will give you better performance and better accommodations. The extra foot or so of beam and ton of displacement that you would get in most non-trailerable 28-footers translates into a lot more usable volume, and in most cases, better performance. At the same time, a Lancer 28 costs less than most 28-footers.

Keeping a boat in a marina or on a mooring can be an expensive proposition. You can greatly reduce your sailing costs by owning a trailerable boat. The problem is that a trailerable as big as the Lancer 28 is a bit of a handful to tow, launch, and rig. You’re not going to hitch it up to the family station wagon after a day at the office and launch it for an evening cruise.

If you need a trailerable boat that can accommodate two adults and several children for relatively short-term cruising, the Lancer 28 makes sense. But don’t expect to get six berths, “full headroom,” shoal draft, and trailerability in a 28′ boat without some fairly substantial compromises.

RELATED ARTICLES MORE FROM AUTHOR

Thanks for the information on the Lancer28.My wife and me own a Lancer 28 we took it on a 6 day sail in puget sound and she did just fine had no problems.Handle great than our 23 ft American the 28 would turn on dime no problem on sailing her.

LEAVE A REPLY Cancel reply

Log in to leave a comment

Latest Videos

Safety At Sea For You & Your Family – The Joe...

What’s The Best Vinyl Window Cleaner for Your Boat?

40-Footer Boat Tours – With Some Big Surprises! | Boat Tour

Electrical Do’s and Don’ts

• Privacy Policy
• Do Not Sell My Personal Information
• Online Account Activation
• Privacy Manager

Lancer 28t mk5

The lancer 28t mk5 is a 27.67ft fractional sloop designed by w. shad turner and built in fiberglass by lancer yacht corp. (usa) since 1982..

The Lancer 28t mk5 is a light sailboat which is a reasonably good performer. It is very stable / stiff and has a good righting capability if capsized. It is best suited as a coastal cruiser. There is a very short water supply range.

Lancer 28t mk5 for sale elsewhere on the web:

Main features

Login or register to personnalize this screen.

You will be able to pin external links of your choice.

See how Sailboatlab works in video

We help you build your own hydraulic steering system - Lecomble & Schmitt

Accommodations

Builder data, modal title.

The content of your modal.

Personalize your sailboat data sheet

Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.

• Sailboat Guide

Lancer 28T MK5

Lancer 28T MK5 is a 27 ′ 7 ″ / 8.4 m monohull sailboat designed by W. Shad Turner and built by Lancer Yacht Corp. starting in 1982.

Rig and Sails

Auxilary power, accomodations, calculations.

The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.

Classic hull speed formula:

Hull Speed = 1.34 x √LWL

Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio .311 Hull Speed = Max Speed/Length ratio x √LWL

Sail Area / Displacement Ratio

A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.

SA/D = SA ÷ (D ÷ 64) 2/3

• SA : Sail area in square feet, derived by adding the mainsail area to 100% of the foretriangle area (the lateral area above the deck between the mast and the forestay).
• D : Displacement in pounds.

Ballast / Displacement Ratio

A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.

Ballast / Displacement * 100

Displacement / Length Ratio

A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.

D/L = (D ÷ 2240) ÷ (0.01 x LWL)³

• D: Displacement of the boat in pounds.
• LWL: Waterline length in feet

Comfort Ratio

This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.

Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam 1.33 )

• D: Displacement of the boat in pounds
• LOA: Length overall in feet
• Beam: Width of boat at the widest point in feet

Capsize Screening Formula

This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.

CSV = Beam ÷ ³√(D / 64)

Embed this page on your own website by copying and pasting this code.

• About Sailboat Guide

©2024 Sea Time Tech, LLC

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

× You are using an outdated browser. Please upgrade your browser to improve your experience.

We Ship Worldwide! | FREE SHIPPING! for US Continental orders over $99. Click for details.

Shopping Cart

Your cart is currently empty..

FREE SHIPPING! for US Continental orders over $99 click for details

Lancer 28 - Sailboat Data, Parts & Rigging

Sailboat data, rig dimensions and recommended sail areas for Lancer 28 sailboat. Tech info about rigging, halyards, sheets, mainsail covers and more.

Sailboat Data directory for over 8,000 sailboat designs and manufacturers. Direct access to halyards lengths, recommended sail areas, mainsail cover styles, standing rigging fittings, and lots more for all cruising and racing sailboats.

MAURIPRO Sailing offers a full range of sailboat and sailing information to help you find the correct sailboat part, one that properly would fit your sailboat and sailing style. Our sailor's and sailboat owner support team are ready to talk with you about your specific sailing needs, coming regatta, or next sailing adventure.

From all at MAURIPRO, let's Go Sailing!

Copyright © 2024 MAURIPRO Sailing LLC.

Review of Lancer 28

Basic specs., sailing characteristics.

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

What is Theoretical Maximum Hull Speed?

The theoretical maximal speed of a displacement boat of this length is 6.5 knots. The term "Theoretical Maximum Hull Speed" is widely used even though a boat can sail faster. The term shall be interpreted as above the theoretical speed a great additional power is necessary for a small gain in speed.

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for Lancer 28 is about 119 kg/cm, alternatively 666 lbs/inch. Meaning: if you load 119 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 666 lbs cargo on the boat it will sink 1 inch.

Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

What is L/B (Length Beam Ratio)?

Maintenance

Are your sails worn out? You might find your next sail here: Sails for Sale

If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.

This section shown boat owner's changes, improvements, etc. Here you might find inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what to look for.

We are always looking for new photos. If you can contribute with photos for Lancer 28 it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us . Criticism helps us to improve.

LANCER 28 Detailed Review

If you are a boat enthusiast looking to get more information on specs, built, make, etc. of different boats, then here is a complete review of LANCER 28. Built by Lancer Yacht Corp. (USA) and designed by W. Shad Turner, the boat was first built in 1977. It has a hull type of Fin w/spade rudder and LOA is 8.43. Its sail area/displacement ratio 17.19. Its auxiliary power tank, manufactured by undefined, runs on undefined.

LANCER 28 has retained its value as a result of superior building, a solid reputation, and a devoted owner base. Read on to find out more about LANCER 28 and decide if it is a fit for your boating needs.

Boat Information

Boat specifications, sail boat calculation, rig and sail specs, accomodations, contributions, who designed the lancer 28.

LANCER 28 was designed by W. Shad Turner.

Who builds LANCER 28?

LANCER 28 is built by Lancer Yacht Corp. (USA).

When was LANCER 28 first built?

LANCER 28 was first built in 1977.

How long is LANCER 28?

LANCER 28 is 7.29 m in length.

What is mast height on LANCER 28?

LANCER 28 has a mast height of 8.23 m.

Member Boats at HarborMoor

• Most Popular Categories
• Boat Covers
• Boat Propellers
• Bimini Tops
• Boat Motors & Parts
• Boat Motors
• Boat Seats & Pontoon Furniture
• All Categories »
• Boats for Sale
• Boating Forums

1982 Lancer Boats 28

Parts, accessories & upgrades to consider:, would these parts and accessories improve your boating and experience, related links.

• Insure my Lancer Boat
• Sell my Lancer Boat
• Boat loan quotes

Parts & Accessories

• Anchoring & Docking
• Cabin & Galley
• Boat Hardware
• Boat Seats & Furniture
• Boat Windshields
• Controls & Steering
• Covers & Tops
• Fishing Equipment
• Fuel Tanks & Systems
• Inflatable Boats
• Life Jackets
• Maintenance & Boat Repair
• Manuals & Books
• Marine Electrical
• Marine Electronics
• Marine Engine Parts
• Nautical Gifts
• Plumbing & Pumps
• Trailers & Parts
• Trolling Motors
• Videos, CDs & Software
• Watersports

STAY CONNECTED

Sign up for our Newsletter to Receive the Latest Deals, News and More.

OUR COMPANY

Explore iboats, connect with us.