laser sailboat two person

Vanguard 1300

Performance, accomodation.

Report error

Tell us what's wrong

We do our best to fix any errors in boatpedia. thanks for the help, your inquiry, please provide your contact information and specify the requirements or preferences you have..

• Club Finder

Laser 2 Rigging Guide

Go To: Sailing - Rigging Guides

Posted on 02 May 2010 14:53

The Laser 2 is a two person dinghy, which comes in various different configurations, some with trapeze, some with spinnakers, some with both. There are a range of names for them, from Regatta, Fun, and Fun New Wave amongst others. With an ideal crew weight between 120-170kg, it's an ideal boat for mixed crews and younger sailors.

The Laser 2 was launched in Australia and North America in 1979, then Europe in 1980. It was designed by Frank Bethwaite, whos family are also responsible for other high performance boats such as the 29er, 49er and B14. It's still fairly popular with University racing in the UK, as it's open handicap popularity has dropped in recent years with the launch of the newer asymmetric ranges from Laser, Topper and RS. The Laser Vago is considered to be the replacement for the Laser 2.

Photo 1, Parts laid out

Photo 2, Trapeze parts

As far as rigging guides go, sit tight because this is going to be a big one! We've got the spinnaker trapeze version, and are going to rig it all up. We have 102 photos in all to show all the steps, so here we go.

Photo 3, Spinnaker parts

Photo 4, Sails, spars and foils

1. The Parts

- Hull - Mast + Shrouds and Forestay + Trapeze Wires - Boom - Main Sail + Battens, Jib Sail, Spinnaker Sail - Rudder + Tiller + Tiller Extension - Daggerboard - Outhaul - Downhaul - Kicking Strap (various arrangements available, ours uses 2x double pulleys) - Inhaul - Clew Tie Down + Hook - Painter Rope - Trapeze Bungee + Height Adjuster Ropes - Trapeze Handles + Cleats (these vary boat to boat) - Traveller / Hawse - Main Sheet - Jib Sheet - Spinnaker Sheets (one red and one green) - Spinnaker Halyard/Downhaul - Spinnaker bag - Pulley blocks (traveller x1 double, main sheet x2, spinnaker sheets x2, spinnaker halyard x3 etc)

Photo 5, The hull and cockpit layout

Photo 6, Trapeze handles

Photo 7, Shroud adjusters

That's a pretty long kit list we have this time! If you're buying a Laser 2 second hand (which chances are you will be as there are very few new ones), make sure you know what you're getting with the boat. It's always good to have a spares box at hand when rigging up for the first time, chances are something will be missing. If the list above looks quite daunting, then remember that some of it's already attached; there's a good chance all the trapeze wires, handles and adjustors will be hooked up ready to go. We're rigging up a spinnaker trapeze version here - it's quite possible some of the above won't apply to your boat, depending on the model.

Photo 8, Centreboard retaining clip

Photo 9, Spinnaker halyard

Photo 10, Spinnaker halyard cleat

There are also some Laser 2's that come with spinnaker chutes through the foredeck into the cockpit, and some quite rare examples with asymmetric spinnakers (and also a one off quite mad conversion that uses a 29er asymmetric spinnaker). We won't be demonstrating any of this as we don't have any available.

2. The Mast

We're going to start with the mast already up. The mast on a Laser 2 is in two halves - the top half is about 6 feet long, and slides into the lower half - but make sure the main sheet halyard goes down the same side of the mast as it comes up. Before you continue, make sure the end of the main sheet halyard you attach to the sail is pulled all the way down.

Photo 11, Spinnaker halyard

Photo 12, Spinnaker uphaul

Photo 13, Jib cleat

It's pretty easy to get the mast up - one person lifts it up and lowers it onto the mast step on the deck - make sure both the deck step and the bottom of the mast are clean. Hold the mast steady, while a second person attaches each shroud in turn, and then the forestay to the fitting on the front of the deck. It is possible to do this solo - the best way we've found is to attach one shroud and the forestay while the mast lies on the ground, and it should then stay up in place while you attach the other shroud and tighten everything up.

3. The Trapeze

Now the mast is up, let's start with the trapeze, as it's easiest to do without the sails in the way. This is a single trapeze on this boat, one on either side for the crew. If you have them they should already be attached to the mast, and shouldn't be taken off, as you will have to remove the diamond shroud to do this, and won't get it back on after! There is a piece of elastic bungee that goes from the bottom of each handle, around the front of the both, to keep the tension on the handles and pull them forward out of the way. To start, thread the elastic through the micro block on the front of the deck (Photo 14), and pull it through to get equal lengths on each side. You can get double micro blocks - you should use the bottom sheave.

Photo 14, Insert the trapeze elastic

Photo 15, Through the bullseyes

Photo 16, Into the cockpit

Next, hold the ends together, and thread them through the fairlead in front of the mast (Photo 15). They then split, one going to each side. There is a fairlead inside the cockpit on the front side that it should lead through (Photo 16), and then for now, tie a quick knot in it, to hold it here (Photo 17), and do the same for the other side.

Next, assemble the trapezes with their handles. You can get slightly varying handles, We have v-jammer adjustors on them. Tie the trapeze adjustor rope (should be about 60cm / 2 feet long), onto the bottom of the jammer with a bowline (Photo 18), then take it around the pulley block of the handle (Photo 19), back through the jammer and tie a knot in the rope to stop it coming out, as shown (Photo 20).

Photo 17, Tie it off for now

Photo 18, Rope adjuster on the trapeze handle

Photo 19, Through the handle

Now, take the end of the trapeze bungee, un-knot it, and secure it around the trapeze handle (Photo 21). We've used a slightly altered round turn and two half hitches, feeding the working end through one of the turns - this stops the elastic slipping through so easily (Photo 22).

Photo 20, Completed adjuster

Photo 21, Secure the trapeze elastic to the handle

Photo 22, Secure the trapeze elastic to the handle

Photo 23, Attach the jib to the front ring

Photo 24, Clip the jib on

The jib is next - make sure your jib halyard is free of any other lines (e.g. the spinnaker uphaul or halyard). Attach the front bottom edge (the tack) of the jib to the front loop of the boat using a shackle. We have to clip our jib onto the forestay along it's luff, but not all Laser 2 sails have these (in fact class legal ones don't).

Photo 25, Attach the jib to the halyard

Photo 26, Hoist the jib, and clip the jammer in

Photo 27, Neatly coil the halyard

Attach the end of the halyard onto the top of the jib with a suitable shackle (Photo 25), and hoist it. We've used a slightly different jib here, it's not Laser 2 class legal, and is ever so slightly smaller, hence the number of shackles on the top to make the wires fit. The Laser 2 has a crimp on the wire part of the halyard - which you can see in Photo 26 if you squint or without squinting in Photo 13 - this has to be fed through the metal fitting shown, and pulled towards the mast to hook it on - you may need to pull on the forestay to give you some extra slack to clip it in. The jib should then stay up - but we had to experiment with shackles to get the fit right. Coil up the halyard rope neatly (Photo 27) - this can be stowed on the deck or in the cockpit - we've got a nice neat solution of two halyard bags, as you can see in Photo 82 at the bottom of this rigging guide. In fact, these are just two see through pencil cases that we managed to attach to the front of the cockpit using shackles and the fairleads.

Photo 28, Jib clew

Photo 29, A bad way to attach the jib sheets

Photo 30, They get twisted easily this way

To finish the jib, attach the jib sheet to the jib clew (Photo 28). The method we've shown here first is a lazy method - fold the rope in half, pass the middle (bite) through the jib clew, then pass the two ends through the middle of the bite (Photo 29), and pull it tight (Photo 30). This is a quick way of doing it, but we've found that when sailing, the two jib sheets tangle up and wind around each other very quickly. They can be fairly easily untangled by sheeting in the jib tight, but the better way is to put a stop knot half way down the length of rope (Photo 31).

Photo 31, Better way - equalize the jib sheet

Photo 32, Stopper knot one side

Photo 33, Stopper knot the other side

Pull it through the jib clew until the knot is against the clew (Photo 32), then put another stopper knot in the other side of the clew, as shown in Photo 33. For some reason, jib sheets tend to tangle slightly less this way, we find. Finally, feed the ends of the jib sheets through the bullseyes (Photo 34), then into the cockpit (Photo 35). Inside or outside of the trapeze lines is the question - the answer is personal preference. The jib sheets need to come inside of the shrouds on the Laser 2, to allow you to sheet the jib in tightly enough.

Photo 34, Jib sheet through the jammer

Photo 35, and into the cockpit

5. Traveller

The traveller is quite easy - take the rope for the traveller, put a small bowline in one end of it, thread the working end through one of the bullseyes/fairleads on the back of the deck, thread it through the smaller block of the two joined blocks (ours are taped together), through the other bullseye/fairlead, the working end through the bowline (as shown in Photo 36), into the cockpit, and through the jammer cleat (Photo 37). Don't forget to put a stopper or figure eight knot in the rope to stop it coming back through (Photo 38).

Photo 36, Attach the hawse or traveller

Photo 37, Lead it into the cockpit

Photo 38, Jam the traveller line

To start the outhaul, secure one end of the line to the bullseye on the end of the boom (on the top), using a bowline (Photo 39). Take it through the smaller side of the stainless steel hook (Photo 40), then back through the bullseye (Photo 41). This line then leads along the top of the length of the boom, and through the jammer cleat on the top of the boom (Photo 42). Again, put a stopper knot in it, and the outhaul is done. If you're not rigging race legal, you could do a different outhaul arrangement, with blocks for a multi-purchase system like we use usually, as our club doesn't worry about race legal, but if you're up against other Laser 2's, you should use this class legal standard outhaul.

Photo 39, Start the outhaul with a bowline

Photo 40, Take it through an S-hook

Photo 41, Back through the first fairlead

7. Main Sail

Unfold the main sail (Photo 43), and get the battens ready. Insert each batten into it's correct batten pocket (Photo 44), and seal them in. On some sails this is just tucking the batten into a fold of the edge of the sail, on this sail we have velcro pocket ends, to stop the battens coming out as shown in Photo 45 (as they don't readily float, as we found out with our Merlin Rocket ones after a capsize!).

Photo 42, Along the boom into the jammer cleat

Photo 43, The main sail

Photo 44, Insert the battens

To raise the main sail, attach the halyard end to the top of the sail, using a suitable shackle (Photo 46) - at this point you may wish to add a masthead float or a few plastic bottles to stop you inverting (as Laser 2's have a reputation for inverting quickly). Slide the sail luff bolt rope into the mast slot (Photo 47), and as one person feeds the sail in (Photo 48), the other should pull on the halyard end that comes out of the bottom of the mast, to raise the sail. If it's difficult to pull up, check the following:

Photo 45, Ensure the pockets are sealed securely

Photo 46, Attach the halyard

Photo 47, Insert the bolt rope into the mast slot

1. The sheave block at the top of the mast, and at the bottom where the rope comes out should freely roll. If they are stiff or rusted, you will struggle, and should consider replacing them. We had to send off to the USA for replacements for the lower one, but it makes an incredible amount of difference. Try a simple oiling first though, don't immediately replace them. 2. If the sheave is ok, and the bolt rope is a little swollen/rough, try some silicon spray along the luff, this should make it easier to hoist. 3. Check the top of the bolt rope, next to the head of the sail, is tight and not frayed. If necessary, use a sharp knife, such as a craft knife, to cut the lose fraying rope off, then try to seal it with a flame.

Photo 48, Carefully hoist the sail

Photo 49, The rack for the main halyard

Photo 50, The halyard cleated off instead

For a standard Laser 2, you should be able to pull the halyard all the way out and expose the end of the stainless steel rope part of the halyard (Photo 49), then hook the wire loop onto one of the teeth on the halyard rack. Depending on conditions you should increase tension on the mainsail by hooking onto a higher tooth. Unfortunately when we had our main halyard wire replaced (as it was fraying), the replacement wire was not quite long enough, so we've had to add a stainless steel figure 8 cleat on the mast, just to the side of the rack (Photo 50). This however is still class legal. Finally, loosely coil up the rope and stow it - we've added halyard bags to pop this into, which you'll see later.

Photo 51, Starting the downhaul with a bowline

Photo 52, Through the sail

Photo 53, Through the top of the jammer cleat

8. The Downhaul

Next comes the downhaul - the purple rope on our boat. We've used lots of different colour pieces of rope to make it easy to tell which rope each one is, and this one is purpe. Start by tying a bowline in the end of the rope , then feed it through the cringle in the front of the main sail (Photo 51) - you should use the upper one (Photo 52), as you won't be able to pull the sail down much with the lower one, which should be used as a sail inhaul. As shown in the picture, get relatively equal lengths of rope either side of the sail. Next, with the working end, feed it upwards through the jammer cleat (Photo 53) just under the boom so it comes around the top edge of the cleat without touching the jaws, through the eyehole of the bowline (Photo 54), then back down through the jammer cleat, through the jaws. This now gives you a multi-purchase (2:1) downhaul, without using a pulley block, which is against class rules. Put the boom on the gooseneck, and this stage is done, as in Photo 55. Make sure the downhaul passes both sides of the boom as shown in Photo 56.

Photo 54, Back through the bowline loop

Photo 55, The completed downhaul

Photo 56, Make sure its either side of the boom

9. Clew Tie Down

We've added a quick and dirty clew tie down - just a length of rope passed around the boom and through the clew cringle on the mainsail a few times, secured with a reef knot, shown in Photo 57. You can come up with more elaborate solutions, but this is simple enough. Just make sure that it's not too tight, and the outhaul rope passes through the middle of it. You also don't want to trap the mainsheet if you've already added it by this point. Why do we need a clew tie down on a Laser 2? Much like the Laser 1, as it's a loose footed mainsail, if you don't have a clew tie down, when you let the outhaul off, the sail may have a tendency to rise up off the boom just lowering the boom, instead of forward along the boom giving it a more curved shape.

Photo 57, The clew tie down

10. Mainsheet

You probably will already have the correct block attached to the boom for the mainsheet, but if you haven't, it should be the black pulley with a becket. Attach it to the boom as shown, then start the mainsheet off the becket, using a bowline (Photo 58). We're using the 10mm thick blue and white rope (note this isn't standard Laser 2 issue but the class rules don't restrain you on rope types/thicknesses/colours). Take it through the larger top block of the traveller, in the front to back direction (i.e. through the front, and out towards the back) as in Photo 59, then back up and through the first pulley again (Photo 60), this time from the back through to the front. Take it along the boom, through the small fairlead (shown between the two spinnaker pole holders, Photo 61), through the final block on the boom (Photo 62), then through the block on the cockpit floor (Photo 63).

Photo 58, Start the mainsheet with a bowline

Photo 59, Through the traveller block, front to back

Photo 60, Through the boom block, back to front

Photo 61, Through the fairlead on the underside of the boom

Photo 62, Through the last block on the boom

Photo 63, Through the cockpit ratchet block

It needs to go through the cockpit block in certain direction, that is, so the ratchet (when switched on), makes a noise as you pull the rope through as if you were sheeting in. You can see the complete mainsheet arrangement in Picture 64 (ignore the weed choked Mirrors in the background). Ideally, you should put a stopper knot in the mainsheet (Photo 65), so you can't lose it completely through the block (although if you have one long enough this is unlikely). Better still, pull the sail out until the boom is about two inches from touching the shroud, and put a stopper knot in the mainsheet just before it goes through the block - this will keep the boom from hitting the shroud, which can never be a good thing.

Photo 64, The completed mainsheet

Photo 65, Tie a knot in it

The kicking strap, such a necessity. Without it, we can't depower the sail when it's too windy. The one that comes as standard with the Laser 2 is pretty pokey, and to be honest, we couldn't figure out how the odd kicking strap block worked, so we replaced it with the one shown in the photos, which was actually found on the rigging DVD from the Laser 2 class association. Their video guide to it is pretty good, and easier to figure out than seeing it in photos, but we'll try.

Photo 66, The kicker system

Photo 67, The kicker system

The class rules allow two double blocks, one with a jammer cleat on. You are not allowed to use any other pulley blocks in the system, and only one line is allowed, but you are allowed to use the line itself to create a multi-ratio system. How do you do that? With clever use of some knots and loops. You are also allowed to use rope protectors. Photos 66 to 68 show the setup of the kicker.

Start with the bowline around the becket on the jammer cleat (on the right). A bowline loop needs to be made around this becket, with one end going through the one pulley sheave on the other block, and then out the other end, ending in a bowline in a thimble. This knot must be as close to the metal thimble as possible - no gaps, or the rope will fall off the thimble. The other end of the line from the first bowline comes up to the thimble bowline, and through the centre of it, acting as a pulley. It then goes back down to the lower jammer block and around a block (not the jammer one), back up and around a block on the top block, then back down to the lower block, and through the block then jammer.

Photo 68, The kicker system

We've indicated the lengths of rope for each measurement in centimetres - this will take some adjustment on your boat depending on the size of your blocks, and how many shackles you use to attach things, so you may need to vary it slightly. It's important to put this all together next to the boat, as you'll need to adjust the position of the knot, as this controls how far apart the blocks will move, but also how close together the blocks will come. This pulley system is quite tricky - but worth the effort.

Photo 69, Attached to the mast

Photo 70, Attached to the boom

Photo 71, The complete kicker

Next, attach the kicker to the fixing point on the bottom of the mast (Photo 69). You may need a selection of shackles to get the kicker angled correctly - we've since changed ours to use a hook, as it's much easier and quicker to take on and off, but in the photo we've shown three blocks to change the angle enough. You can use a twisted shackle instead if you like. It's a good idea to be careful what shackles you use, as we found the shackle key handle was digging into the aluminium groove on the mast. The other end of the kicker should attach to the kicking point on the boom (Photo 70). While you're still rigging, remember to let the kicker run as slack as possible to depower the sail. The complete setup is shown in Photo 71.

12. Rudder and Centreboard

You can't sail a boat without it's foils... well actually, see our Centreboardless and Rudderless articles but it's pretty tricky doing both at the same time (especially in a Laser 2). In any case, it's much easier to sail with them attached. Next, we attached the rudder (Photo 72), by sliding it onto it's pintles. Our rudder is already setup with the lines attached, which you can see more information on in our article on rudder repairs , but basically, we have the bung attached to the rudder with a thin line (so we never forget it, as shown in Photo 73), and a downhaul on the rudder to allow us to pull it down while on the water. It drops onto it's pintles as shown, then the bung is screwed in. To finish off the rudder, insert the tiller into the top of the stop, and remember to pass the tiller extension under the back part of the traveller (Photo 74), but over the front part, as shown. Secure the tiller into the stock with a cotter pin, as shown in Photo 75, making sure this in turn is tied onto the stock.

Photo 72, Attach the rudder

Photo 73, Remember the bung

Photo 74, Add the tiller and tiller extension

Finally, add the daggerboard. On the Laser 2 it drops into the slot, which you won't be able to do on land. Ideally it should have a securing clip like ours on top, with a matching clip line secured somewhere in the cockpit (Photo 77) - ours is on the front. This stops it sinking or floating off when you capsize. Sorry, if you capsize.

Photo 75, Secure the tiller to rudder

Photo 76, The rudder downhaul ready

Photo 77, Add the centreboard and clip it on

The boat is now ready to sail, as shown in Photo 78! You could take it out just like this, and in fact, if it's your first time in a Laser 2, we recommend you do just that. Get used to it for at least a few hours first (unless you're a pretty spectacular sailor), and then come back for the spinnaker rigging part of this guide.

Photo 78, The completed boat (sans Spinnaker)

13. Spinnaker

This is the first rigging guide we've done with a spinnaker in, so sit tight, this is going to drag on a bit longer!

Most Laser 2 models have a classic symmetric spinnaker. There is one particular model that alledgely has an asymmetric spinnaker, but we can't find much conclusive proof of it, and there's also a one off where some nutter took a mast head asymmetric spinnaker from a 29er and modified a Laser 2 to make it fit. At least one of us at Caution Water is a bit jealous of that...

Photo 79, Block at front of the cockpit

Photo 80, Block at back of the cockpit

Photo 81, Block halfway down the cockpit

Chances are, you'll have a standard symmetric spinnaker model. It's a fair sized spinnaker, at 10 metres squared of sail, it'll keep you going at a fair whack down wind. Some models of the Laser 2 have a built in spinnaker chute running from the front of the deck to the front cockpit wall, but not all do, and if you have one that doesn't, you'll have to use a spinnaker bag, like we do. If you have a chute, it only makes a minor difference to this guide, and we'll point out where that is.

Photo 82, Halyard bags (non standard)

For more in depth articles on how to generally rig a spinnaker, see our series on spinnakers - it would be a good start to read that first. This is the Laser 2 version.

To start, we have a long spinnaker halyard/retrieval line. It goes into a sheave on the mast just above the jib block about 3/4 of the way up the mast, travels down through the mast, and exits just below the gooseneck, on the front of the mast (you can just about see it in Photo 9). There is no sheave at the bottom - just a hole. It then passes through a small jammer cleat on the mast (designed only to hold the spinnaker up, shown in Photo 10), and then starts traversing around the cockpit to turn into the retrieval line.

Photo 83, Spinnaker halyard and retrieval line

Photo 84, Spinnaker halyard and retrieval line

Photo 85, Spinnaker halyard and retrieval line

Coming from the jammer, it comes straight down to a small block located at the front of the cockpit - we've put ours on the same fitting as the toestraps. There are several other blocks that it is then designed to go through. For a properly rigged Laser 2, looking at the cockpit from the front of the boat, it travels from the mast, down through the block we've already discussed, along the middle of the cockpit, through a small pulley block attached to the main sheet block spring, through a small pulley block attached to the back of the cockpit (again to the toestrap fixing point), then back along the length of the cockpit along the right hand side, where it's picked up as the retrieval line, and attached to the spinnaker. You can see this in Photos 79, 80, 81, 83, 84 and 85.

Photo 86, Spinnaker halyard and retrieval line (shortened)

Photo 87, Spinnaker sheet block

Photo 88, Attach the halyard

However, on the few occasions we've tried this arrangement, it's caused issues, typically the longer the line in the cockpit, the more chance of it getting snagged on something or sat on (small cockpit, it's difficult to avoid sitting on things). Most asymmetric boats with spinnakers have their halyard/retrieval line only traverse the front half of the cockpit, so that's what we've done in Photo 86. We have the blocks in the same places, but we miss out the block at the back of the cockpit, so it only travels down to the mainsheet and back, and has less opportunity to get trod on or snagged. We're not entirely sure if this is in contravention of the class rules, so check before you make this minor change for class racing.

Photo 89, Partially hoist the spinnaker

Photo 90, Pass the retrieval line through the first patch

Photo 91, Attach the retrieval line to the second patch

The rest of our setup for the spinnaker is fairly standard. We have a pulley block on either side of the boat, attached to the chainplates for the shrouds with a shackle, as shown in Photo 87. The end of the halyard (that hopefully you didn't lose inside the mast as it's a pain to get through again) is attached to the head of the sail with a bowline, as shown in Photo 88, and the sail is then partially hoisted (Photo 89). The retrieval line that has been fed around the cockpit is fed up through the middle of the first patch (Photo 90), and then attached to the second with a bowline (Photo 91), as the Laser 2 has two retrieval patches. This is just to make getting it down a little easier as it has a fairly big belly. When done, hoist the sail up all the way (unless it's too windy).

Photo 92, Match sheet colour to sail corners

Photo 93, Attach the spinnaker sheet with a bowline

Photo 94, Through the jammer blocks and cleats

Photo 95, Through the fairlead

Photo 96, Attach the other sheet

Photo 97, Through the jammer and block

Next, attach the sheets; we have ours colour coded, white rope with red flecks for port, and green flecks for starboard (shown in Photos 92, 93 and 96). As the corners of the sail are colour coded, it makes everything a little easier. The spinnaker sheets are easily attached with a bowline (Photos 93 and 96). The sheet is then fed through the spinnaker jammer blocks just in front of the shroud chain plates (Photos 94 and 97), through the blocks attached to the chainplates, and then through the external bullseye halfway back along the deck (Photo 95), and into the cockpit. You can see the fully hoisted spinnaker in Photo 98. Make sure you rig all of the spinnaker lines outside of the jib sheets - for this reason it's best to have the jib rigged up first.

Photo 98, The spinnaker hoisted and ready

Photo 99, Pack the spinnaker

Photo 100, Practise this lots

Photo 101, The sheets and halyard go in last and stick out

Finally, drop the sail, and stuff it into the spinnaker bag (Photo 99). The belly and retrieval patches should go in first, followed by the three corners last, with the corners and their attached rope sticking out of the mouth of the bag, free and ready to hoist, as shown in PHotos 100 and 101. As we mentioned before, you can get Laser 2 with spinnaker chutes - we tried to modify ours, and attached a fabric spinnaker chute from a Dart 16, which is about 4 feet long and made out of grey shiny material. Unfortunately as it was relatively new, and the spinnaker was also fairly new, there was too much friction between the two, and the spinnaker would only pull in about 2 feet, so it didn't really work. Sailing's all about experimenting :)

There are two final things for the spinnaker - firstly, the spinnaker pole should be attached to the boom. In Photo 4, you can see two grey things, one either side of the boom, about 2/3rds of the way down the boom. These are very similar to short off cuts of fairly narrow guttering, riveted to the boom. The pole pushes through one of these, then is held to the end of the boom using a small elastic bungee tie, similar to those you get on marquees. The other thing is the spinnaker pole uphaul/downhaul. There is a metal fairlead half way up the mast. To this we have attached a length of elastic, which ends in a stainless steel S-hook. This elastic is short enough to be under tension enough so that when it attaches to the small fairlead half way down the spinnaker pole, it pulls the pole up (even when it is under load of the spinnaker). This S-hook also has a length of 5mm rope attached to it, which comes down from the hook, through a v-jammer cleat on the mast (there is one on the front that can be used), and this will now act as a pole uphaul/downhaul. When not in use, clip it onto the spinnaker pole ring on the front of the mast.

Photo 102, Ready to hoist when on the water

So there you have it - this was a long one, as we said - there's lots of things to play with on a Laser 2. There are various different models, but many of them will have the features described above, and if you have one that has anything extra we'd be happy to receive photos to add to this guide. Enjoy sailing your Laser 2!

Fig 1. Get all the gear ready

Home - About Us - Sailing - Club Finder - Links - Link To Us - Join Us - Contact Us - Classes - Reviews - Photo Galleries - Glossary - Knots

Disclaimer - Privacy Policy

Laser 2 Sailboat: The Ultimate Guide to Mastering this High-Performance Racing Dinghy

by Emma Sullivan | Jul 20, 2023 | Sailboat Gear and Equipment

Short answer laser 2 sailboat:

The Laser 2 sailboat is a high-performance sailing dinghy designed for racing and recreational sailing. It features a single trapeze, a mainsail, and a jib, providing exciting and responsive sailing experiences. Its hull is made from fiberglass, making it durable and lightweight.

Introduction to the Laser 2 Sailboat: Experience the Thrill of Sailing with this Classic Vessel

Have you ever dreamed of harnessing the power of the wind and gliding across the open waters? If so, then the Laser 2 Sailboat is just what you need to make those dreams a reality. With its sleek design, nimble handling, and unparalleled performance, this classic vessel has been a favorite among sailing enthusiasts for decades.

The Laser 2 Sailboat is renowned for its ability to thrill both beginners and experienced sailors alike. Whether you’re looking to learn the ropes or test your skills in competitive racing, this versatile boat is up to the task. Its simple rigging system and responsive controls make it easy to handle, even for novices. And with its durable construction and steady buoyancy, it can withstand any conditions Mother Nature throws at it.

One of the most captivating aspects of the Laser 2 Sailboat is its incredible speed. Once you catch a gust of wind in its fully battened sail, you’ll feel an exhilarating rush as you slice through the water like a knife. The combination of its lightweight hull and powerful sail allows for impressive acceleration and top speeds that will leave other boats trailing behind. It’s no wonder why sailors around the world have fallen head over heels in love with this legendary vessel.

But don’t be fooled by its fast-paced nature – the Laser 2 Sailboat also offers plenty of opportunities for leisurely cruising and exploration. Its spacious cockpit can comfortably accommodate two or three people, making it perfect for adventurous outings with friends or family members. Take a lazy afternoon sail along picturesque coastlines or navigate tranquil lakes while enjoying breathtaking views – there’s no limit to where this magnificent vessel can take you.

What truly sets apart the Laser 2 Sailboat from other sailboats is its community. Joining fellow sailors who share your passion for adventure and camaraderie makes every sailing experience all the more enjoyable. Connect with experienced professionals who can offer valuable tips on technique, equipment, and maintenance. Engage in spirited discussions about your latest sailing adventures or upcoming regattas. With the Laser 2 Sailboat, you’ll become part of a tight-knit group that spans the globe, bound together by a love for this remarkable vessel.

So, if you’re ready to embark on an unforgettable sailing journey, look no further than the Laser 2 Sailboat. Experience the sheer thrill of harnessing the power of wind with its unmatched performance and speed. Immerse yourself in a vibrant community of like-minded sailors who will inspire and support you along the way. Get ready to create memories that will last a lifetime – because once you’ve experienced sailing with this classic vessel, there’s no turning back.

How to Master the Art of Sailing a Laser 2 Sailboat: A Step-by-Step Guide for Beginners

Sailing is an ancient art that has captivated humans for centuries, invoking a sense of freedom, adventure, and pure bliss. If you’ve ever daydreamed about gliding effortlessly across the water with the wind in your hair, then learning how to sail a Laser 2 sailboat might be the perfect endeavor for you. In this step-by-step guide tailored specifically for beginners, we will explore the intricacies of sailing a Laser 2 and offer tips to help you master this exhilarating hobby.

Step 1: Understanding the Basics Before setting foot on a Laser 2 sailboat, it’s crucial to grasp the fundamental concepts of sailing. Familiarize yourself with key terms such as “tacking” (changing direction against the wind), “jibing” (changing direction with the wind behind you), and “points of sail” (different angles at which a boat can travel relative to the wind). Learning these essentials will serve as your foundation in becoming a skilled sailor.

Step 2: Preparing Your Laser 2 Sailboat Once you’ve familiarized yourself with sailing’s terminology, it’s time to prep your vessel. Ensure that all necessary equipment is on board and properly functioning- from ropes and rigging to sails and rudders. A well-maintained boat guarantees a smoother sail and contributes significantly to overall performance.

Step 3: Rigging Your Boat Rigging refers to setting up your boat, including attaching sails and rigging ropes correctly. This process can seem daunting at first but fear not! It becomes second nature with practice. Pay close attention to maintaining proper tension in your rigging lines – too loose or too tight can impact maneuverability considerably.

Step 4: Launching Your Laser 2 Sailboat You’re now ready for launch! Identify a safe location with suitable access points for entering the water; preferable areas would have few obstructions like rocks or shallow waters. Be mindful of wind conditions and direction before venturing out to ensure a more enjoyable experience – light to moderate winds are ideal for beginners.

Step 5: Safety First Never underestimate the importance of safety during any sailing activity. Before setting sail, equip yourself with a personal flotation device (PFD) and ensure everyone on board does the same. Also, be aware of weather forecasts and water currents that can affect your journey. Remember, wise sailors prioritize safety above all else.

Step 6: Balancing Act Mastering balance is vital when sailing a Laser 2 sailboat as shifts in body weight greatly impact agility and speed. Finding your center of gravity as you maneuver, particularly during turns or gusts of wind, will optimize your boat’s performance. Train your mind and body to anticipate these changes; it is both an art and a science.

Step 7: Navigating the Wind Understanding the nuances of wind direction is key to becoming an accomplished sailor. Study how sails behave when catching the wind at different angles, known as points of sail mentioned earlier. Adjusting the angle between the sail’s edge and the wind will allow you to harness its power efficiently while simultaneously controlling your course.

Step 8: Mastering Tacking and Jibing Now comes the exciting part – changing directions! Tacking refers to turning into the wind by bringing the bow through it; jibing involves turning away from the wind with it behind you. These maneuvers require practice, timing, and coordination between crew members (if applicable). As you become more proficient in tacking and jibing smoothly, you’ll experience newfound confidence in maneuverability.

Step 9: Advanced Skills & Techniques Congratulations! You’ve grasped the basics and are now ready to delve into more advanced techniques such as fine-tuning sail trim (adjustment), mastering upwind sailing angles, or even attempting tricks like planing (sailing at high speed with hull lifting out of the water). These skills come with time and experience, so continue pushing your boundaries as you evolve in your sailing journey.

Step 10: Continued Learning Sailing is an art that can never be fully mastered. The beauty lies in continuous learning, honing your skills, and embracing new challenges. Join sailing clubs or communities to exchange knowledge and experiences with fellow enthusiasts. Embrace the lifelong process of understanding wind patterns, experimenting with sail configurations, and exploring different bodies of water. Be open to new discoveries!

In conclusion, mastering the art of sailing a Laser 2 sailboat requires patience, dedication, and enthusiasm. With this step-by-step guide for beginners as your compass, set sail on a transformative journey that will unlock a world of adventure and sheer joy out on the open waters. Let the wind carry you toward newfound horizons as you become one with nature through the sport of sailing!

Frequently Asked Questions About the Laser 2 Sailboat: Everything You Need to Know

Title: Frequently Asked Questions About the Laser 2 Sailboat: Everything You Need to Know

Introduction: Ahoy, sailing enthusiasts! Whether you are new to sailing or a seasoned sailor, one boat that has undoubtedly caught your attention is the Laser 2 Sailboat. In this comprehensive guide, we will address some of the most commonly asked questions about this remarkable vessel. So grab your captain’s hat, secure your lifejacket, and let’s set sail into the world of the Laser 2!

1. What Makes the Laser 2 Sailboat So Special? The Laser 2 Sailboat stands out for its versatility and high-performance capabilities in both cruising and racing scenarios. The boat features an innovative design that combines speed and stability like no other. Its two-man configuration allows for collaboration between sailors while maneuvering through varied wind conditions, making it truly unique among its counterparts.

2. How Does It Differ from Other Sailboats? While there are many sailboats on the market, the Laser 2 sets itself apart through its adaptability. This vessel can be equipped with various rigging options according to your skill level or desired sailing style. From a single-sail setup for beginners to twin-trapeze configurations for advanced racers seeking an adrenaline rush – there is something for everyone!

3. Is It Beginner-Friendly? Absolutely! The Laser 2 caters to sailors of all expertise levels. Novice sailors can embark on their nautical adventures with confidence due to its forgiving nature and stable hull design. With accessible controls and simplified rigging systems, those new to sailing will find it easy to learn the ropes while still experiencing thrilling moments on the water.

4. How Do Its Racing Capabilities Compare with Other Boats? For competitive spirits hungry for victories on race day, the Laser 2 won’t disappoint! Its lightweight hull allows for quick acceleration, ensuring you consistently remain at the forefront of races against competitors. The boat’s maneuverability and responsive controls allows for quick adjustments, making it a fierce contender even in highly competitive fleets.

5. Can It Be Sailed Single-Handed? Yes, it can! Though designed as a two-person sailboat, the Laser 2 can be sailed solo by experienced sailors who prefer going solo or need some solitude on the water. With appropriate modifications and adjustments to the rigging systems, it is possible to enjoy the Laser 2 experience single-handedly.

6. What Type of Maintenance Does the Laser 2 Sailboat Require? The Laser 2 is known for its durability and low-maintenance requirements. Its robust construction ensures longevity, while simple systems make maintenance tasks hassle-free. Regular cleaning after each sail and occasional inspections of rigging components should suffice to keep your Laser 2 in top-notch condition for years of enjoyment.

7. Where Can I Find Spare Parts or Accessories? Fear not, fellow mariner! The Laser 2 community is strong, with passionate enthusiasts regularly sharing tips, tricks, and information about spare parts or accessories. Numerous online retailers specialize in providing genuine Laser 2 components to ensure you find exactly what you need with ease.

Conclusion: Now that we have delved into the world of frequently asked questions about the remarkable Laser 2 Sailboat, you are equipped with vital knowledge that will help you set sail confidently upon its sleek hull. Whether you’re seeking casual cruising adventures or craving exhilarating races, this versatile vessel has got your back covered. So cast off from land and embark on unforgettable aquatic expeditions aboard the magnificent Laser 2 – where thrill meets tranquility!

Exploring the Design and Features of the Laser 2 Sailboat: What Sets It Apart?

Introduction:

The Laser 2 sailboat is not your ordinary watercraft. It is a remarkable fusion of design, engineering, and ergonomics that sets it apart from other sailboats in the market. In this blog post, we will dive into the intricacies of its design and explore the array of features that make the Laser 2 a true standout.

1. Lightweight Construction:

One striking feature of the Laser 2 sailboat is its lightweight construction. Meticulously crafted using advanced materials and innovative manufacturing techniques, every component is designed to reduce weight without compromising on strength. This means increased durability while allowing for swift and nimble sailing performance.

2. High-performance Hull Design:

At the heart of the Laser 2’s exceptional functionality lies its masterfully designed hull. Utilizing extensive research and cutting-edge hydrodynamics, this boat glides through water with minimal resistance, maximizing both speed and maneuverability. Its sleek lines seamlessly integrate form with function, making it a sight to behold as it effortlessly slices through waves.

3. Three-sail Configuration:

Unlike conventional sailboats sporting a single or double-sail setup, the Laser 2 boasts a unique three-sail configuration that takes sailing to a whole new level. Consisting of a main sail, jib, and spinnaker, this trifecta offers enhanced control over various wind conditions. Whether you’re gracefully cruising along or chasing adrenaline-fueled speeds, this versatile setup ensures an exhilarating experience for sailors of all skill levels.

4. Ergonomic Cockpit Design:

The Laser 2’s cockpit design strikes an exquisite balance between comfort and functionality. The ergonomically contoured seating positions allow sailors to maintain optimal control while minimizing strain during long journeys or intense racing competitions. Every touchpoint has been meticulously engineered to keep sailors in harmony with their vessel – leading to enhanced responsiveness and precision handling on the water.

5. Rigging Simplicity:

Tying knots and setting up a sailboat can be a daunting task for newcomers. However, the Laser 2 eliminates this complexity by incorporating an intuitive rigging system. With numbered lines and user-friendly adjustments, even novice sailors can quickly learn to set up and fine-tune their sails. By reducing hassle and ensuring ease of use, the Laser 2 empowers sailors to focus on what truly matters – sailing itself.

6. Durability that Stands the Test of Time:

Investing in any watercraft is a significant decision — one that requires assurance of its longevity. The Laser 2’s robust construction ensures it stands the test of time, with high-quality materials and meticulous craftsmanship providing unmatched durability. This means you can confidently embark on countless adventures without worrying about wear and tear impacting your vessel’s performance or structural integrity.

Conclusion:

In conclusion, the Laser 2 sailboat undoubtedly surpasses expectations when it comes to design and features. Its lightweight construction, high-performance hull design, three-sail configuration, ergonomic cockpit, rigging simplicity, and durable build make it shine amidst a sea of ordinary sailboats. Whether you’re an experienced sailor seeking exhilarating thrill rides or a beginner looking to enter the world of sailing, the Laser 2 sets itself apart as a sophisticated watercraft that guarantees unforgettable experiences on every voyage.

Safety Tips and Precautions for Sailing a Laser 2 Sailboat: Enjoying Your Adventure Responsibly

Sailing a Laser 2 Sailboat can be an exhilarating experience, allowing you to explore the open waters and enjoy the serenity of the sea. However, just like any other water sport, it’s crucial to prioritize safety and take necessary precautions to ensure an enjoyable adventure. In this blog post, we will provide you with detailed professional advice on how to safely navigate your Laser 2 Sailboat while still having a witty and clever time!

1. Mind the Weather Forecast: Before setting sail, always check the weather forecast thoroughly. Wind speed, direction, and potential storms are critical factors that can greatly influence your sailing experience. While it may seem exciting to challenge yourself in rough conditions or strong winds, it’s essential to understand your abilities and limitations as a sailor. Remember, responsible sailors don’t disregard signs of inclement weather – they adjust their plans accordingly.

2. Get Comfortable with Your Boat: Knowing your boat inside out is paramount for safe sailing adventures. Take the time to familiarize yourself with every aspect of your Laser 2 Sailboat – from its rigging and sails to its navigation instruments and safety equipment. A witty sailor knows their boat intimately; better understanding ensures you’re prepared for any situation that comes your way.

3. Safety Equipment Should Be Your Best Friend: Never set sail without properly equipped safety gear! Life jackets are at the top of the list – make sure you have enough for each crew member aboard your Laser 2 Sailboat. Additionally, carry flares or alternative signaling devices in case you need help in an emergency situation — cleverly choose colorful flares that match your vibrant personality!

4. Communicate Effectively: Before embarking on your sailing journey, let someone else know about your plans. Share details including departure time, estimated return time, planned route (if applicable), and emergency contact information. Keeping friends or family informed allows them to keep an eye out for your well-being from the shore, and they’ll appreciate your responsible approach to adventuring.

5. Buddy System: Sailing is more enjoyable when you have company. Not only does sailing with a partner enhance your overall experience, but it also enhances safety. In case of an injury or other unforeseen circumstances, having a buddy on board ensures that there’s always someone available to assist or seek help if needed — plus, you can share witty banter during those long stretches of calm waters!

6. Keep Your Phone Dry: While it may seem obvious, we cannot stress enough how important it is to keep your phone protected from water damage. We live in a world where being connected is essential – not just for capturing clever Instagram stories but also for emergencies. Today’s smartphones are often equipped with waterproof or resistant features; however, carrying them in a proper waterproof case will provide an extra layer of protection – just in case things get too wet and wild!

7. Education is Key: Investing time in expanding your sailing knowledge through courses and certifications will undoubtedly make you a safer sailor. Understanding navigation rules, reading charts or maps, and knowing how to react in different boating situations are invaluable skills that come with education and training. Being professionally skilled while exhibiting a clever wit ensures admiration from fellow sailors!

8. Respect Nature: Finally, always respect the environment around you when sailing your Laser 2 Sailboat. Avoid littering, decrease noise pollution as much as possible (we know it can be difficult when celebrating witty victories on the high seas!), and follow guidelines for responsible anchoring practices.

In conclusion, enjoying sailing adventures responsibly means putting safety first while injecting some wit and charm into every voyage aboard your Laser 2 Sailboat! By following these tips and precautions diligently, you can confidently navigate the open waters while having fun, ensuring your adventure is memorable for all the right reasons. Happy sailing and stay cleverly safe!

Unleashing Your Competitiveness: Racing Techniques and Strategies in a Laser 2 Sailboat

Introduction: Sailing is a sport that has captured the hearts of adventurers and thrill-seekers since time immemorial. The sense of freedom, mastery over nature, and the adrenaline rush offered by sailing are unparalleled. Amongst all the sailboat classes out there, the Laser 2 is renowned for its exhilarating speed, maneuverability, and versatility. Whether you’re an experienced sailor or a novice looking to dive into competitive racing, this blog post will guide you through some ingenious techniques and strategies to unleash your competitiveness in a Laser 2 sailboat.

1. Mastering Boat Handling: A vital aspect of successful racing in a Laser 2 is mastering boat handling skills. This includes understanding how to efficiently maneuver your vessel through various wind conditions, waves, and currents. Being able to extract maximum speed from your sailboat while maintaining control requires finesse. Practice tacking (turning the bow of the boat through the wind) and jibing (turning the stern through the wind) until these maneuvers become second nature.

2. Effectively Using Sail Controls: Sail controls play a crucial role in optimizing your overall performance on water. Familiarize yourself with the main controls available on a Laser 2: mainsheet, traveler, vang/kicker, cunningham/downhaul, and outhaul; each has its own purpose in fine-tuning your sails’ shape and power efficiency. Understanding how to trim your sails using these controls can make a significant difference in speed and responsiveness.

3. Tactical Decision-Making: Racing involves not just raw sailing skills but also strategic decision-making on the racecourse. Analyze wind shifts meticulously to anticipate changes before they occur and position yourself advantageously on the course accordingly. Keep an eye on other competitors’ tactics as well; learn from their successes but also be ready to adapt and counter their moves. Sail smart, exploiting any tactical opportunity that arises to gain an edge over your rivals.

4. Teamwork: For those participating in two-person or three-person Laser 2 racing, effective teamwork is paramount. Communication between teammates on boat handling, sail setting adjustments, and tactical decisions need to be smooth and seamless. A synchronized effort between the helmsman and crew can make the difference between a win and a loss. Develop trust with your team members, learn each other’s strengths and weaknesses, and work in tandem towards a common goal.

5. Physical Fitness: Sailing may not seem like an intense physical activity at first glance, but maintaining optimal fitness levels is vital for competitive success in a Laser 2 sailboat race. Cardiovascular endurance helps you sustain high energy levels throughout demanding races, while strength training allows you to handle the boat’s forces efficiently during maneuvers. Core stability exercises are indispensable for maintaining balance on trapezing boats like the Laser 2.

Conclusion: Unleashing your competitiveness in a Laser 2 sailboat is a journey that combines technical mastery of boat handling, strategic decision-making, effective teamwork, and physical fitness. Investing time in honing these skills will undoubtedly elevate your racing game to new heights of excellence. So embrace the thrill of competition, embrace the adventure that comes with sailing a Laser 2, and prepare to unleash your full potential as you conquer the waves with style!

Recent Posts

• Approaching a Mooring Buoy: Essential Tips for Safe Navigation
• Best Tiller Autopilot: Enhance Your Sailing Experience
• Nautical Navigator: Essential Tools and Techniques for Seamanship
• Sail Making Material: A Comprehensive Guide
• 2 Person Dinghy: The Ultimate Guide to Choosing the Perfect Boat
• Sailboat Gear and Equipment
• Sailboat Lifestyle
• Sailboat Maintenance
• Sailboat Racing
• Sailboat Tips and Tricks
• Sailboat Types
• Sailing Adventures
• Sailing Destinations
• Sailing Safety
• Sailing Techniques

The Laser Two's Strengths

Inexpensive.

Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.

• Sailboat Guide

Laser 2 is a 14 ′ 5 ″ / 4.4 m monohull sailboat designed by Bethwaite Design and Ian Bruce and built by Performance Sailcraft between 1978 and 1987.

Rig and Sails

Auxilary power, accomodations, calculations.

The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.

Classic hull speed formula:

Hull Speed = 1.34 x √LWL

Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio .311 Hull Speed = Max Speed/Length ratio x √LWL

Sail Area / Displacement Ratio

A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.

SA/D = SA ÷ (D ÷ 64) 2/3

• SA : Sail area in square feet, derived by adding the mainsail area to 100% of the foretriangle area (the lateral area above the deck between the mast and the forestay).
• D : Displacement in pounds.

Ballast / Displacement Ratio

A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.

Ballast / Displacement * 100

Displacement / Length Ratio

A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.

D/L = (D ÷ 2240) ÷ (0.01 x LWL)³

• D: Displacement of the boat in pounds.
• LWL: Waterline length in feet

Comfort Ratio

This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.

Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam 1.33 )

• D: Displacement of the boat in pounds
• LOA: Length overall in feet
• Beam: Width of boat at the widest point in feet

Capsize Screening Formula

This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.

CSV = Beam ÷ ³√(D / 64)

Thanks to Ken H. for contributing drawing scanned from orginal brochure. The LASER 2 has a convoluted history. There was the LASER II FUN, and the LASER II REGATTA, a LASER FUN NEW WAVE, (which added an assym. spinnaker). All retired before 1990.

Embed this page on your own website by copying and pasting this code.

• About Sailboat Guide

©2024 Sea Time Tech, LLC

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

• Sign In or Register
• Boats for Sale
• Research Boats
• Sell a Boat
• Search Alerts
• My Listings
• Account Settings
• Dealer Advertising
• Laser 2 Sailboat

Laser 2 Sailboat Boats for sale

Laser 2 Sailboat with Spinnaker

Highlands, New Jersey

Posted Over 1 Month

Up for sale is a great condition Laser 2 with Spinnaker for sale. The pictures are a little grainy as they are still pictures from the a go-pro video i made last summer sailing her. Notice the built in spinnaker tube infront of the mast. Very rare, only the newest Laser 2's have these, they are getting harder and harder to fine. I have all necessary equipment for the spinnaker (pole and sail). Spinnaker sail is old, but serviceable. Comes with everything needed to sail, including spin pole and spinnaker sail. this boat is ready to rock and roll! this baby is ready to rock! just add wind and water! No trailer. Boat is located in Port Monmouth, NJ (Zip 07758). i can show you how to step the mast when you pick up, its very easy. great boat for newbies as well as advanced sailors. sail boat sailboat laser 2 hobie cat german shepherd

Laser Sailboat with Trailer / Ready to sail today / trailer has new tires

Kansas City, Missouri

Length 14.0

No longer race-ready, but still tons of fun. this much loved Laser, is ready for a new home. She's been cleaned up and is ready to sail as soon as you put her in the water. She comes with 2 piece mast and boom, Rudder with tiller extension, keel, one sail with battens, sail and spar bags, and a trailer that is road ready. This is the perfect boat for teaching your kids to sail. Easy for one person to launch and rig, even without a launch ramp. She's fast and snappy enough for even an experienced sailor to handle. Guaranteed that after a day sailing her, your face will hurt from smiling so much! Located in Kansas City, Mo 64116 Call Bill for info 816-916-9031

1974 Laser Sailboat with 1999 Trail-Rite Seitech two boat trailer

Santa Barbara, California

Model Standard

Category Dinghies

Length 13.8

1976 Laser Standard - older classic laser with wooden blades, all rigging, 2 sails (1 new practice sail and 1 blown out race sail), water tight inspection port with bag, hiking strap, ratcheting main block ready to sail! Very fun to sail and often get comments on the classic wooden blades. 1999 Trail-Rite galvanized trailer with Seitech two-boat rack, great condition, lightly used, Buddy Axle Bearings, current permanent California trailer registration. The Seitech rack alone is $958, a ready to roll trailer is $1975 - see the similar trailer picture in our listing - so pick up our boat and trailer for less than the trailer alone. Approx 14' l x 5' w, 315lbs, 2" trailer ball. Located in Santa Barbara, California. Local Pickup only. $250 Deposit Required on Buy It Now or Accepted Best Offer. Buyer to pickup within 14 days of Buy It Now or Accepted Best Offer. Thanks for looking!

12' Skipper Sailboat with Trailer

Sharpsburg, Georgia

Make Skipper

12' Skipper Sailboat with Trailer. Boat comes complete with Jib, Main Sail, Rudder, and Daggerboard. Boat also has a motor mount for outboard/trolling motor. Boat is in good condition. Trailer is a Venture Trailer and is in excellent shape. Very roomy for a 12', fits 3 adults and is a great way to learn how to sail. Skipper's are made in England and are hard to find in the States. Hull has (2) spots where the fiberglass has been repaired, but it is water tight. Located 30 min South of Atlanta $950 Cash. Call or Text 404-788-1026.Sunfish, sail boat, dinghy, laser, optimist, snark.

Morgan out island 41' cutter sailboat

Venice, California

1974 Morgan out island 41 sloop/cutter. Designed for Bahamas charter, this full keel, heavy displacement, shallow draft boat is perfect for liveaboard cruising. Very roomy, stable, and sea kind, the Morgan OI41 is a joy to sail - both coastal and offshore. She points comparatively well with her cutter rig, and is extremely stable - tracking like a train. Come take her for a sea-trail, you'll see... I am the third owner of this beautiful yacht. It was ordered custom from the factory for the original owner with every available option. Walk-through. Teak cockpit accents, toe-rail, and handholds. Solid cruiser. She has been across the Pacific twice, and through the Panama Canal three times. 320gal water and 140gal diesel capacity. Recent refit to prepare for another extended cruise, but owner's plans have changed. Everything comes with the boat; spares, 100's of feet of extra line, blocks, rigging, nuts, bolts, filters, 2 spare alternators, gusher manual pump, hoses, fuel filters, oil filters, racor filters, perkins parts, bosun's chair, ditch bag, life raft, fishing poles, propane, 140gal diesel, tools, laser thermometer, galley foot pump, fiberglass repair tools, batteries, anchor balls, bimini, MOB strobe, more, too much to list. Everything I've done to this boat has been done to the highest standard, no short-cuts or shoddy workmanship. I spared no expense to do it correctly. That's something you won't find on 90% of boats you'll look at. Come see for yourself. email for full specs

27' O'Day sloop - moving away from ocean - must sell soon :(

New York, New York

Make O'Day

Model Sloop

Category Cruiser Boats

Aquarius is easy to single hand, is great for day sailing yet sleeps five to six in four bunks (two in the fore-peak, one to two amidships, one on either side of the engine bay that has drop down sides for engine access). She's great for either a beginner or a seasoned sailor. O'Days are very popular, often raced, and there are several internet sites with information, forums and and offering of parts. I've had the pleasure of owning Aquarius for ten years now and I love her. We're relocating and after much procrastinating I realize that the ocean will just be too far way. The previous owners had her in Oyster Bay NY for many years. She is surprisingly fast yet very stable (2,230 lb lead keel) - although not suggested, we've powered through 6'-8' seas with her. She sails very close to the wind, is roomy with loads of storage, and you can stretch out on the 6'-6" cockpit seats with custom cushions (both with lockers beneath) or seat several. There's approximately 6' headroom. She has a 30 horse power Universal Atomic Four engine whereas most boats her size have either 9.9 HP outboards (which cavitate in lumpy water) or 7 to 13 HP diesels. She starts fast, runs clean. Uses about a gallon an hour. These are so popular that new parts are still made for it - even an optional hand crank! Here's one major source of new parts, service and info: moyermarine.com. She has a new jacket side plate from Moyer Marine. There's incredibly easy access to the engine from both sides and the front. There's even an engine "room" light. She has the original 12 gallon main gas tank along with the then optional 6 gallon plastic auxiliary tank (located on a shelf in the port side locker). Aquarius was made just before the cost of oil, gas and related resins sky-rocketed and caused many boat companies to skimp on construction and then to go out of business. Her hull is solid fiberglass - no balsa to worry about, and is about 3/8" thick. The prop is bronze. The prop shaft is bronze with a recent sacrificial zinc. I consider her the best year - 1975 had the best interior layout and has a lead ballasted fin keel with skeg mounted rudder (offering some protection to it). She has a 4' draft and nice freeboard which allows for usually dry sailing and calm guests.. My son worked at West Marine during school which gave us great discounts - she has new lifelines, new lazy jacks on the main boom, new main-sheet, new bronze thru-hull valves and Y-valve for the macerator toilet, new VHF radio, solar powered charger to keep her batteries charged between use, original Loran C, new coil and ignition parts, new water pump impeller, new engine exhaust pipe to the water muffler, new rubber diaphragm on her bilge pump, a cockpit tent in almost new shape, recent 12 volt receptacle, dual batteries with selector and gauge, tiller steering with nice looking new laminated wood tiller, old auto tiller, dual cockpit scuppers, cockpit cushions, anchor, teak and stainless steel swim ladder between the split stainless steel rear pulpit, auto-tiller, loads of storage, two sinks, cabin lights, electric macerator toilet between the fore peak and the main cabin with folding teak doors for privacy, curtains, cabin inclinometer, hanging locker, cockpit "table" (portable, that spans across the seats), storage under all the berths, a 12v hand vacuum, carpeting, a large ice box under a lid in the counter that drains to outside, alcohol stove plus a propane grill that attaches to hang off of the stern. There's a GPS/Depth sounder along with the original one that still works by a light revolving within its face and is entertaining to watch. There's roller furling, a wind vane and radio aerial atop the mast, stainless bow pulpit, a boom vang, a whisker pole for downwind sailing, genoa in reasonable shape, two jibs (one is older and a bit soiled), two mainsails (one also is older and a bit soiled). Two new stainless fishing rod holders, I've several life jackets, am/fm/cd stereo, full safety equipment including fire extinguishers, radar reflector ball, first aide kit, floodlight, Lifesling overboard rescue system, a flare gun, horn, boat hook etc. I can throw in a new medium sized dog life jacket if the buyer needs it. The upholstery is in very good condition. Loads of interior teak in good condition. The former owner gave us the original set of plastic dishes, silverware and ice tongs, and I'll give them to the new owner so they can stay with the boat. What I'm aware of: minor scars from dock battles etc, and a couple of soft deck spots which I was planning on repairing this season. The hardware & connections to the hull have been resealed over the years and should be checked. We had a problem with gunk in the main tank so we had it drained and we were planning on replacing it. We've been running off of the 6 gallon tank which has given us more than enough range. The sink hand pumps aren't working but I've a new electric pump to pressurize the system waiting to be installed (Whale offers refurbishment kits if you'd rather hand pump). The hatch boards are ready for replacement, last year there was minor weeping at the toilet - it may need tightening or a new gasket, and there's some minor rust here and there on the engine. Very little rain water weeps in from the ports - I do a yearly sealing but this year haven't gotten to it yet. She's a pretty dry boat. Aquarius has loads of spare parts including a new small holding tank for the toilet, new deck hardware along with a good-sized used winch for the cabin top to make single handling even easier, new electric water pump to pressurize the water system, new electric bilge pump - all ready to be installed. Obviously I love the boat - we weren't planning on moving from Brooklyn but the house that we've bought was an amazing deal in a historic small town and we realized that's where we want to semi-retire. She's out of the water in Gateway Marina (opposite Floyd Bennett Field) in Brooklyn open to the bay and to the ocean. The marina owes us a launch but it seemed to make sense to allow prospective buyers a look at her bottom. Here's more info: oday.sailboatowners.com, odayowners.com and iheartodays.com/model_oday_27 There was an ad in Craigslist for her but it was put in without my knowledge by a marina service employee. It was taken off. The boat is sold as is, and will need to be picked up or sailed from her location in Gateway Marina, Brooklyn, NY by the new owner. Storage and shipping arrangements are the responsibility of the purchaser. You may see the boat by appointment. She is fairly priced - serious offers only please. Thank you for looking. single handling, Pearson, Catalina, sloop, beginner boat, inexpensive sailboat, C&C, Hunter, Tartan, Morgan, Cal, Beneteau, Columbia, Macgregor, Irwin, Alberg, Vanguard, Islander, San Juan, Lightning, S2, Cape Dory, Hobie, Seidelmann, Tanzer, Island Packet, Herreshoff, Newport, West Wight Potter, Sunfish, Gulfstar, Laser, Ericson, Santana, Westerly, classic plastic, Contessa, stable, solid, best sailboat, day-sailer, daysailer, open water sailing, safe, high freeboard, cruiser, masthead sloop, dinghy, racer, catamaran, trimaran, diesel, sail, boat, fiberglass, awesome boat, catboat, rowboat, cheap sailboat, tender, anchor, coastal cruiser, Gulf, Bombay Clipper, Island Packet, Westerly, inboard, Universal, Universal Atomic Four, bronze prop and shaft, Nonsuch

Narrow Results

Current search reset all.

• Keyword: laser 2 sailboat
• Skipper (1)
• Cruiser Boats (1)
• Dinghies (1)
• California (2)
• Georgia (1)
• Missouri (1)
• New Jersey (1)
• New York (1)
• Search Title Only
• Has Picture
• Include Sold Listings

Showcase Ads

1980 Whitehall 19' Custom

2014 Skeeter 21i

Montgomery, TX

2005 Ranger Intercoastal 185VS

2016 Malibu Wakesetter 22 VLX

Firestone Park, CA

2017 Robalo R222 Center Console

Green Bay, WI

2006 Boston Whaler 150 Montauk

Chenequa, WI

2000 Duckworth Silverwing

Kettle Falls, WA

Create Alert

Please, name this search

Select Interval

Alert Successfully Created

• Vessel Reviews
• Passenger Vessel World
• Offshore World
• Tug and Salvage World
• Maritime Security World
• Specialised Fields
• Marine Projects World
• Small Craft World
• Tanker World
• Dry Cargo World
• Boxship World
• Aquaculture World
• Trawling World
• Longlining World
• Seining World
• Potting World
• Other Fishing Methods
• Regulation & Enforcement
• Feature Weeks
• Classifieds
• Book Reviews

VESSEL REVIEW | Sinichka – Electric commuter boats designed for Russia’s Moskva River

A series of three new electric monohull commuter ferries have already begun operational sailings on the Moskva River in the Russian capital Moscow.

Built by Russian shipyard Emperium, sister vessels Sinichka , Filka , and Presnya – all named after rivers in Moscow – are being operated by the Moscow Department of Transport and Road Infrastructure Development (Moscow Deptrans). They are the first units of a planned fleet of 20 vessels that will serve the capital city and other nearby communities. The new ferry system will be the water transport system to be operated on the Moskva River in 16 years.

Each vessel has a welded aluminium hull, an LOA of 21 metres, a beam of 6.2 metres, a draught of only 1.4 metres, a displacement of 40 tonnes, and capacity for 80 passengers plus two crewmembers. Seating is available for 42 passengers on each ferry, and the main cabins are also fitted with USB charging ports, wifi connectivity, tables, toilets, and space for bicycles and scooters. The cabin layout can be rearranged to allow the operator to adjust the distances between the seats and to install armrests of varying widths.

An open upper deck is also accessible to passengers and is the only area on each ferry where smoking is allowed.

The ferries are all of modular construction with each ferry’s wheelhouse, main cabin, and other structural elements being built as complete, separate components. This enables the ferries to be easily dismantled for transport to anywhere in Russia by rail and then quickly re-assembled within seven days.

The ferries are also ice-capable. Recently completed operational trials on the Moskva showed that the vessels can also easily navigate under mild winter conditions with broken surface ice, though year-round operations are planned for the entire fleet.

The ferries are each fitted with 500kWh lithium iron phosphate battery packs that supply power to two 134kW motors. This configuration can deliver a maximum speed of 11.8 knots, a cruising speed of just under 10 knots, and a range of 150 kilometres.

Emperium said the transfer of rotation of electric motors to the propeller is carried out by direct drive. As a propulsion installation, a pulling rotary propeller-steering column with double screws is used. The installation of double pulling screws, with similar power, allows an operator to increase the efficiency of the propulsion system to deliver a slightly higher speed or to reduce energy consumption. This arrangement also provides the ferries with enhanced manoeuvrability necessary for navigating in close quarters.

The batteries themselves have projected service lives of 10 to 12 years and are fitted with safety features such as built-in fire extinguishers and gas vents. Quick-disconnect features allow the batteries to be easily removed for replacement or maintenance.

Some of our readers have expressed disquiet at our publication of reviews and articles describing new vessels from Russia. We at Baird Maritime can understand and sympathise with those views. However, despite the behaviour of the country’s leaders, we believe that the maritime world needs to learn of the latest developments in vessel design and construction there.

Click here to read other news stories, features, opinion articles, and vessel reviews as part of this month’s Passenger Vessel Week.

Related Posts

Baird Maritime

Tags: Emperium Filka Moscow Moscow Department of Transport and Road Infrastructure Development Moskva River Presnya Russia Sinichka WBW newbuild

• Previous VESSEL REVIEW | Ferry Rokko – Second 194m Ro-Pax for Miyazaki Car Ferry
• Next Brighton man to be charged for illegal abalone haul

Baird Maritime , launched in 1978, is one of the world's premier maritime publishing houses.

The company produces the leading maritime new portal BairdMaritime.com , home of the world famous Work Boat World, Fishing Boat World, Ship World, Ausmarine, and Commercial Mariner sub-sites, and the industry-leading ship brokerage platforms WorkBoatWorld.com and ShipWorld.com .

Contact us: [email protected]

© Copyright - Baird Maritime

• Terms & Conditions
• Advertise with Baird Maritime
• Submit News/Leads

3 dead as Ohio tornadoes prompt mass casualty response in Logan County

Gov. mike dewine: 'the indian lake community will come back'.

At least three people are dead as a result of a series of severe storms that ravaged Ohio on Thursday night, spawning a series of 20 tornado warnings across the state and knocking out power to thousands.For the second time in as many weeks , storms and likely tornadoes tore through Ohio.

Authorities in Logan County are dealing with a mass casualty incident where at least three people died in tornado that struck a trailer park near Indian Lake , located about 70 miles northwest of Columbus. The National Weather Service confirmed as of 2 p.m. Friday that at least four tornadoes touched down across Ohio.

Logan County Sheriff Randy Dodds said the number of deaths could increase as rescue efforts continue.

"It's one hell of a mess up there," Dodds said. "It looks like a war zone." 

Ohio Gov. Mike DeWine: 'There's an awful lot of damage'

Dodds said there were areas where first responders could not search overnight because of debris and downed power lines that made it unsafe. He said there is anticipation that there may be more people found dead during searches that will continue Friday morning.

Dodds said there are areas where a single home may have remained untouched while everything around it has been leveled.

"The power of this thing is just amazing. It hopped around but when you look at it, it's just amazing." 

Officials including Gov. DeWine, Lt. Gov. Jon Husted, Senate President Matt Huffman and others held a news conference at around 3:30 Friday to give an update on the recovery.

DeWine drove through the Indian Lake area before the press conference to talk with home owners and those impacted by the storms.

"There's an awful lot of damage," he said.

DeWine said the Indian Lake community will rebound from the tragedy.

"The Indian Lake community will come back. That's the message I got from everybody," DeWine said at Indian Lake High School.

State Rep. Jon Cross, R-Findlay, who represents part of the area, said lawmakers have to work with the governor to get the community back open.

"This is a community that relies on tourism," Cross said. "We have devastated businesses that lost everything. We need to get these businesses back open.

Ohio's emergency operations center activated Thursday night during the severe weather and continues to coordinate damage assessment and clean-up efforts with local, state and federal agencies.

“Fran and I are deeply saddened by those impacted by the tornadoes and severe storms,” DeWine said in a statement issued shortly before noon. “We share the grief of the families who lost loved ones, homes, and livelihoods.  Ohioans will come together as they always do with resilience and compassion as we support and rebuild our communities.”

Indian Lake residents assess Ohio tornado damage

Indian Lake resident Blaine Schmitt was working outside his home last night when his wife called him.

She warned him about the tornado and told him to get into the bathtub. He gathered his dog and friend, Greg McDougle, and hunkered down in the bathroom.

Over the next few minutes, the tornado swept through Schmitt's home, shredding the front wall and scattering debris in his yard.

"It sounded like a freight train literally went through the living room," Schmitt said.

Luckily, Schmitt and McDougle managed to get through the storm unscathed.

"I thank God that I'm alive and that my kids weren't here. It was very emotional when I first got here, and it's been emotional ever since then. But I pray every day and it paid off," Schmitt said.

McDougle used to live next door with his father. He sold the home two years ago, and it was being renovated when the storm hit. Now, all that remains is scattered debris, a single flattened wall, and the foundation.

"This is what's left. No one was living here, and thank God for that," McDougle said.

Logan County resident describes tornadoes: 'It's a noise you'll never forget'

As storms approached Logan County late Thursday, Loretta Kinney told her goddaughter Lucy there was nothing to be afraid of.

Kinney and her brother walked Lucy home and by the time they returned to their own house, Kinney said she realized just how wrong she was. The two headed down to the basement and waited out a storm and likely tornadoes that rolled across the Midwest and the Indian Lake region about 70 miles northwest of Columbus.

By the time they'd emerge, Kinney would come to find out that at least three people had died and homes and businesses around the county had been ripped apart.

"Just the noise. When they say you hear a train, it's a noise you'll never forget," Kinney said. "Then to come up and see it, it is so surreal. Even though I'm standing here and looking at everything it doesn't seem real."

Shelter opens for Indian Lake storm victims

The Logan County Emergency Management Agency said it's opened a shelter for victims of Thursday night's storm at the Church of God located at 1000 E Brown Ave.

The United Way of Logan County also established a relief fund where monetary donations can be made to assist residents who have been impacted by the storms.

Donations can be made online to the Indian Lake Tornado Relief Fund at  www.uwlogan.org  and 100% of donations will go to help community members recover in both the short and long-term from the storms.

Possible tornado strikes Lakeview, Indian Lake: 'People's homes are destroyed'

Columbus Dispatch Photographer Doral Chenoweth arrived in the area before midnight and reported finding extensive damage, including a destroyed trailer park with tractor trailers and RVs overturned and large trees uprooted. In Lakeview, the library and a government building were damaged.

"Every building in Lakeview and every building here has some form of damage," he said, from a spot near Lakeview. "People's homes are destroyed."

The Logan EMA confirmed for The Dispatch that a trailer park in the Indian Lake area just north of Lakeview was struck by a tornado or at least very high winds that have caused extensive damage. The community also reported having a shortage of ambulances.

An NWS spokesman said he couldn't confirm that a tornado struck the community but said there was "reports of a lot of damage there." The NWS will send investigators out Friday to confirm the tornadoes as it did last month when nine were confirmed across Ohio .

Thursday's Ohio storms were part of a larger system that pushed through the Midwest beginning in the afternoon and into the evening.

The Indiana State Police said there are “many significant injuries” after a tornado tore through the community of Winchester, AP reported.

“There have been many, many significant injuries, but I don’t know the number. I don’t know where they are. I don’t know what those injuries are,” Indiana State Police Superintendent Douglas Carter told reporters just before midnight Thursday. “There’s a lot that we don’t know yet.”

The National Weather Service in Wilmington and Cleveland issued 20 tornado warnings based on a review of social media posts. That does not include multiple thunderstorms and other alerts.

Indian Lake volunteers continue search for people impacted by storms

Emergency personnel conducted "grid searches" Friday morning in the impacted areas where the storm struck, the sheriff said.

Grid searches are methodical searches using a grid pattern to ensure that all areas can be checked without duplicating efforts and minimizing the risk of missing an area.

The sheriff said there are areas that first responders are able to access during the daylight that were not accessible Thursday night because of downed power lines and concerns about gas leaks. Those areas are now being searched. Crews are also researching areas that were searched Thursday night to ensure that no one who needed medical assistance was missed.

While there has been a "plethora" of volunteers who have arrived on the scene, Dodds said volunteers are more likely to be necessary as the searches conclude and the clean-up effort begins. 

The Central Ohio Strike Team mobilized Friday morning to go to the Indian Lake area to help with the ongoing emergency response. The strike team, one of five regional teams across the state that are specially trained to respond when there are large-scale disasters, includes firefighters from every agency in Franklin County.

The members of the strike team receive special training on how to do search and rescue operations in the event of structure collapses, as well as how to do rescue operations in confined spaces and machinery extractions. 

AEP transmission towers toppled in Delaware County

AEP Ohio confirmed that the storms toppled six transmission towers near Olentangy Berlin High School. As of 9:15 a.m. Friday, the number of customers without power had risen to more than 13,000. 

Photos posted by the utility company on social media show the tower on its side. The tower fell into other power lines in the area. 

AEP issued a statement Friday afternoon saying more than 30 power lines came down in the storm, as well as six transmission towers in Delaware County.

The utility company said the goal is to have power restored to as many customers as possible on Friday, however, some customers who get their power from the high-voltage transmission towers could face a potential multi-day outage. AEP said as more information is gathered throughout Friday afternoon, those affected customers will receive an automated phone call. 

Specks and tatters of insulation lined sidewalks and the sides of houses at the Pine of Berlin Station, a subdivision near Berlin Middle School. Debris from inside houses — books, crayons, a broken pair of child’s glasses — were scattered in the grass.

“Someone else’s roof is in my kitchen,” said Katie Sprinkle, who weathered the storm with her husband and two kids, ages 9 and 11. The storm terrified her 9-year-old daughter.

“Pray loud, mom,” she said her daughter told her.

The kids wore bike helmets to protect themselves from falling debris, and her husband placed an overturned canoe over them. The family could hear windows breaking in the wind. It sounded like an explosion, Sprinkle said.

Delaware County road closures due to Thursday's storms

Several major traffic routes in Delaware County remained closed as of 7 a.m. Friday because of debris in the roadway. Ohio 315, closed between Hyatts Road and U.S. 23, is expected to remain closed at least through morning rush hour.

The Delaware County Sheriff's office is asking that people avoid the area where the aftermath of the storms are and avoid sightseeing. There are continued concerns about live wires and large trees in the roads.

In a post on Facebook Friday morning, the Delaware County Sheriff's office said crews have been working throughout the night to try and clear roadways but there are areas where debris continues to block roads. 

The sheriff's office asked for additional travel time and patience from drivers, as well as willingness to take alternate routes. 

The sheriff's office said that as of 5 a.m. Friday, a number of roads remained impassable. Those roads included: 

• Portions of Berlin Station Road near Glenn Parkway, between Kingsbury and Braumiller, between Piatt and Dale Ford
• Portions of Bunty Station east of Liberty Road
• Africa Road north of Cheshire
• Portions of Rome Corners
• Portions of Walnut Road and Piatt Road
• Portions of Ohio 3

Tornado warnings from Thursday night's deadly tornadoes

Storms hit indiana, kentucky and northern, central and southern ohio.

At least three confirmed tornadoes touched down Thursday afternoon in southern Indiana and north-central Kentucky Thursday, leaving dozens of structures damaged or destroyed,  The Louisville Courier-Journal reported .

Tornadoes were confirmed near Hanover and Marion in Indiana and near Milton in Kentucky. As for Ohio, officials have said it's too early to say just how widespread the storms were, or whether any confirmed tornadoes touched down.

Meteorologist Steve Harbenach of the National Weather Service in Wilmington said there have been several radar confirmations of possible tornadoes across Ohio, but added "we really have no idea right now how many tornadoes we had."

"There have been numerous areas where we've had reports of damage," he added. "It's going to take a while for us to sort through that. it's going to take multiple days for us to sort through this to see what happened."

An X user who was driving from Lima and passing through Logan took pictures of the extensive damage. In the post on X, he said authorities told him that he had missed a tornado "by about 2 minutes." He could not confirm if there were any casualties but said that a large section of U.S. Route 33 northwest of Marysville would remain closed as authorities assessed the damage.

Tornado watches remained in effect until midnight in dozens of Ohio counties, including Delaware, Fairfield, Fayette, Franklin, Hocking, Licking, Madison, Pickaway, Union, Ross, Butler, Clinton, Hamilton, Warren, Champaign, Clark, Drake, Greene, Logan, Miami, Montgomery, Preble and Shelby.

Severe thunderstorm warnings remained in effect for Franklin and Madison counties until 11 p.m. Thursday.

The Associated Press contributed to this report.

10 Best Sailboats for Solo Sailing (One Person)

Last Updated by

Daniel Wade

December 27, 2023

The idea of single-handed sailing or solo sailing appeals to racers and cruisers alike. But what are the best sailboats for solo sailing? Well, let's find out.

Whether you've been thinking of going for a day's sail without assistance or dreaming of a solo passage to Bermuda, the desire and the magic of venturing out alone at the sea is something that any sailor can experience. It doesn't matter if you're cruising or racing, solo sailing, of course, requires you to change your thinking as you'll be solely responsible for the entire operation of the boat. More importantly, choosing a well-founded boat is critical to solo sailing.

When sailing with a crew, things may seem a little easy because you share the responsibilities among the crew and support each other in case of anything. But what happens when you decide to venture out alone or sail single-handedly? Whatever motivates you to go out sailing solo, you should choose a good boat that you can perfectly operate single-handedly.

In this article, we'll highlight 10 best sailboats for solo sailing, their prices, their best rigs, and everything else that you might need to sail them comfortably and safely.

Table of contents

General Features of Best Sailboats for Solo Sailing

Here are the general features to look for when choosing the best sailboat for solo sailing.

The Availability of Automation Systems

The forces that you sometimes have to deal with when out sailing can be extreme, to say the least. It doesn't matter whether you're sailing solo or with a crew, it's always very important not to underestimate the power of the wind and tide. While you can do a lot on your own, having some automation systems in place is an important feature if you're planning to sail single-handedly. In other words, a good sailboat for solo sailing should have various automation systems to make your work a lot simpler.

So if you're planning to go solo sailing, it would be great to consider a boat with the following systems:

• ‍ Autopilot for steering
• Lines running aft (running to the cockpit)
• Roller furling
• Electric windlass
• Hydraulic bow/stern thrusters with remote

Stability and Ease of Use

Again, the best sailboats for solo sailing are generally not known for their speeds. This is because they typically have wide beams and short waterlines, which are vital in providing stability thereby limiting their speeds. In short, the best sailboats for solo sailing usually sacrifice speed and additional performance for ease of use and stability.

Boat Features

When it comes to the structure of the boat itself, it's important to go for a boat that is close to the water, relatively small when compared to the wave height, and has lighter ballast, especially when compared to the displacement ratio. The idea here is that these features can combine to increase the boat's performance when you're sailing solo.

Additionally, a good solo sailing boat should be designed with a flat profiled aft bottom section. This is to ensure that the boat can come up on a plane when the wind conditions are breezy or marginal.

When it comes to the best sails for solo sailing, you can go for the unique sail design that combines both a Bermuda sail and a gaff sail. This can be essential in giving you a more sail area on a shorter mast than is possible when using either a gaff sail or a Bermuda sail. More importantly, the combination of a gaff sail and a Bermuda sail not only gives you a greater sail area on a shorter and easy to control mast but can also reduce the heeling force that's common in boats with taller and narrower sails.

Still on sails, it makes a lot of sense to choose easily operated sail controls. You certainly want a sail that one person can tuck a reef in quickly and be able to easily adjust the sheets. You should, therefore, prioritize the reefing and sail handling systems.

In terms of rigs, the gaff rig is arguably the best when solo sailing. Although the Bermuda rig is the most common, especially in modern sailboats, you can lose some windward abilities because of its lower aspects. As such, you can choose to use the gaff rig thanks to its ease of use and superior downwind performance.

10 Best Sailboats for Solo Sailing

There are numerous sailboats out there that can be easily and properly handled by a skilled and experienced sailor. To make it a lot easier for you, the following boats are great choices when solo sailing. Whether you're just looking to experience how it feels to solo sail or short-handed, they all offer easy, comfortable, and safe sailing.

Jeanneau Sunfast 3200

{{boat-info="/boats/jeanneau-sun-fast-3200"}}

From the outset, it's easy to see that the Jeanneau Sunfast 3200 is designed with offshore short-handed sailing in mind. In addition to being a purist's sailing boat, this boat is a small and light boat that can be easily handled. Even better, it has the stability and strength to handle long passages and that's exactly why it was initially designed with the Trans-Atlantic race in mind.

With this boat, you can easily attain double figures in terms of speed even if you're sailing downwind. In essence, the Sunfast 3200 is designed with some of the latest technology to afford you the best strength-to-weight ratios. It has all the necessary features to allow you to easily adapt it to perform perfectly either as a cruising or racing sailboat. Some of its greatest features include the two double cabins, the chart table, a galley, and a head compartment.

This boat is particularly impressive when sailing off the wind and it's designed to ensure that it's functional and reliable even when solo sailing. This is perhaps because it's designed and set up for racing, so it can be great for you especially if you're looking for a coastal cruiser that can be easily handled.

Using the sloop Marconi can be the best way to go given that this vessel has a keel-stepped mast. Its maximum beam begins at 60% aft of the stem before extending to the transom, which can result in the sled hull being driven by a mainsail-heavy rig. This can then fly the masthead asymmetrical off a short sprit.

Given that the Jeanneau Sunfast 3200 is a very modern boat that's equipped with some of the latest boating technology; it comes with a base price of about $160,000. This is a vessel that's built by one of the world's premier builders and offers an intriguing blend of technology, reliability, functionality, practicality, and performance.

Having been the European Yacht of the Year for 2008, the Sunfast 3200 may just be the godsend boat for your solo sailing dreams.

{{boat-info="/boats/hanse-371"}}

If you're looking for a slippery cruiser-racer that's always ready to sail single-handedly, you might perhaps want to take a serious look at the Hanse 371. Introduced in 2003, the Hanse 371 is a mid-sized boat that was designed in a true blend of old and new boating technology. Thanks to its furling and self- tacking jib, the Hanse 371 becomes an instant single-handed sailing vessel that takes much of the strain out of your solo sailing adventures. That's not all; this boat is more popular as a result of its autopilot system. Press a few buttons and you'll be ready to go.

Although it's a little bigger and not one of the smallest boats out there, it can be a great option if you're planning to sail solo but on a vessel that offers a tremendous amount of space. Whether you love a boat with a shallow or deep center of gravity, the Hanse 371 has a commendable large galley and a spacious cabin layout.

Everything about rigging this boat is designed to be easy. Again, the jib on a roller furler is self-tacking. In essence, everything is standard and easy to use, which makes this boat a dream when sailing single-handed.

Already a classic that's known for its stylish interior, timeless look, and ultimate performance, the Hanse 371 is a coveted vessel that may cost you around $60,000.

Hunter Channel 31

{{boat-info="/boats/hunter-channel-31"}}

Launched in 2001, the Hunter Channel 31 is structured with a hull and keel design that makes it easy to sail single-handed. This is a British-made vessel that has steadily moved from the racing scene to become a well-respected cruiser, especially among the solo sailing community. Thanks to its faultless handling and impressive turn of speed, the Hunter Channel 31 provides near uncomplicated sailing without losing its impeccable handling features.

Its well-balanced hull shape can either be structured with a low or deep center of gravity. It also has an efficient twin keel to give it more stability, which is perfect for solo sailing. This is, without a doubt, one of the main reasons why Hunter Channel 31 has proved popular among solo sailors trying to sail across narrow channels.

The Hunter Channel 31 is also designed with a great standard deck layout, as well as a non-compulsory self-tacking jib that comes with a single line mainsail reefing. That's not all; the tiller steering is also efficient if you're sailing single-handed as you can steer it with your legs while trimming sails.

It should, therefore, not come as a surprise that owners of the Hunter Channel 31 keep them for a long time, so finding them on the market will be a long shot. But if you're lucky enough to find one, you'll be getting a great vessel that will never let you down if you want to sail solo.

Like many Hunter designs, the Hunter 31 can be fractionally rigged given that it has a relatively large mainsail to give it a more sail area in light winds and a small headsail with a lower sheet load. In other words, you can efficiently and easily reef from the cockpit.

At about $35,000, the Hunter Channel 31 is quite affordable and is a great bargain in its category.

{{boat-info="/boats/j-boats-j109"}}

The J/109 is unquestionably one of the best single-handed or double-handed sailboats that money can buy. Whether you're looking for a coastal cruiser or a long-distance single-handed vessel, the J/109 will rarely disappoint. That's essentially why its single-handed offshore capabilities remain popular with sailors looking to make North Atlantic crossings.

Even though it is widely categorized as a planing sailboat, this vessel is too heavy for simple planing. Instead, this is a superb boat that offers an all-round performance. It doesn't matter whether you're solo sailing or sailing with a crew, its performance is always top-notch.

Thanks to its asymmetric spinnaker, you can easily jib it from the cockpit, especially in light wind. But when the wind is on the north of 20 knots, you can pole out the jib to give you a quick downwind speed. No matter which type of rig you choose to use, the J/109 offers a fair degree of control.

In terms of price, the J/109 is one of the relatively expensive sailboats out there, though this is compensated with the high standard equipment and outstanding quality of construction. For about $58,000, you can get a great boat that offers excellent solo sailing adventures.

West Wight Potter 19

{{boat-info="/boats/west-wight-potter-19"}}

Designed for safety and easy handling, the West Wight Potter 19 is a great sailboat for solo sailing. Although its name might not be one of the catchiest in the sailing scene, it's been around for over three decades and is steadily becoming a popular pocket cruiser. The original design draws inspiration from the U.K. but is currently built by the International Marine in California.

Over the years, this boat has seen several improvements even though its original look and features still attract a large and dedicated group of followers. This is not only a tough little boat but its hard-chine hull offers incredible stability. This makes it a very easy and ultimately forgiving sailboat. Whether you're looking to sail from California to Hawaii or across the Atlantic, the Potter 19 is outstanding for solo sailing.

This is a Bermuda-rigged sloop. Its sail plan is huge enough to propel the sailboat in various conditions. This makes it a perfect single-handed boat as you can easily set it up or take it down with no special equipment.

This is a remarkably affordable boat. At around $5,000 you can get a superb solo sailing sailboat. But if you want a new Potter 19 with additional features, you could pay about $25,000.

Beneteau 31

{{boat-info="/boats/beneteau-31"}}

As a small cruiser keelboat, this French-designed boat is primarily built of fiberglass and is perfect if you want a vessel that's great for solo sailing while still offering maximum space for comfort. Its galley is equipped with superb stowage and counter space and even a sit-down navigation station with a small table.

Maneuvering this boat under power is quite easy and is well worth it for any solo sailor who is in the market for a coastal cruiser.

It has a fractional sloop rig, which makes in-mast furling a great option. This makes it easy to handle but also powerful in light winds. If you're sailing the boat off the wind, bow pulpit and an optional asymmetric cruising chute can keep things lively.

The new 31 can cost around $115,000, which is quite expensive but certainly worth it if you want to cruise the world in this French masterpiece.

Catalina 315

{{boat-info="/boats/catalina-315"}}

This is a nifty pocket cruiser that raises the quality bar for solo sailors with extreme comfort and performance. With just a 9.45 meter hull, the Catalina 315 has more internal room than most classics and remains superb for solo sailing.

Although it's a much bigger boat, it has little but significant features that make all the difference. For instance, the split backstays are great for balance and functionality. This is one of the main reasons why it won the Cruising World's 2013 Boat of the Year Best Inshore Cruiser award.

With a masthead sloop, rigging the Catalina 315 is a lot easier as it is equipped with both an in-mast roller furling mainsail and a roller furling genoa.

Even though the Catalina 315 will exceed your expectations when sailing solo, it's a high-end sailboat that will cost you north of $175,000. But if that seems expensive, you can look for a used model, which will cost you slightly lower.

{{boat-info="/boats/vanguard-laser"}}

A boat that has become a staple in the Olympics Games, the Laser may be simple and small but a real-go to boat if you want a vessel that will rarely let you down for your solo sailing escapades. As one of the world's most popular single-handed sailboats, its main feature is its sheer simplicity. This might not be the best boat for you if you love those fussy, big boats. But if you're looking for an amazing boat with a two-part free-standing mast and a sleeved sail, the Laser should be on top of your list.

The fact that it has a lightweight hull and is easy to rig makes it one of the most popular racing sailboats in the world with over 200,000 boats in over 140 countries. This is undoubtedly a perfect boat that's specifically designed for solo sailing.

This boat can be rigged using various rigs, so you should go with whatever works for you. We, however, prefer cat rigging the boat since it has no headsail and only has one mainsail. This is a boat that is designed for speed, particularly in high winds. It's also easy to set up, which makes it a marvelous option for solo sailing.

For around $7,000, this is probably one of the most affordable solo sailing sailboats you could ever get your hands on. You should, however, keep in mind that its price may widely vary depending on their availability in your area.

{{boat-info="/boats/oday-rhodes-19"}}

A real classically-styled sailboat, the Rhodes 19 is an ideal family daysailer that can be perfect for you if you're a spirited solo sailor. Whether you're planning to sail in heavy weather or fast, the Rhodes 19 is designed with a forgiving hull and is an accomplished heavy-weather performer. For over 5 decades, and with more than 3,500 boats built, this sailboat has proven time and time again that it has the characters for both beginners and experienced sailors.

With a low center of gravity, this boat remains a classic beauty that's very fast, easy to trailer, and will get many compliments whenever you're solo sailing. No wonder it is still actively raced throughout the United States.

A simple sprit rig can work greatly on this boat but you can also consider Bermuda-Rigged sloop, which is efficient in propelling the boat in various wind conditions.

Its price may vary depending on your location but something around $20,000 will get you a sailboat that's still in tip-top condition.

{{boat-info="/boats/dehler-29"}}

If like most Americans, you have a soft spot for finely engineered German automobiles, the Dehler 29 can be a great option for your solo sailing escapades. Even though the Dehler 29 hasn't attracted a huge following in the American shores, it remains an excellently-structured German sailboat, especially for sailors looking for a stable, agile, adaptable, and comfortable sailboat.

Whether you enjoy a smooth and solo cruise on a breezy afternoon or is energized by speed, the Dehler 29 is one of the most adaptable sailboats. This is certainly why it has received numerous accolades in the boating scene including the 1998 Cruising World Magazine Boat of the Year, as well as Sailing World Boat of the Year award.

Given that it's a single-handed sailboat, you can tiller steer it and cat rig it with ease to give you easy maneuverability, confidence, and absolute versatility.

With powerful dynamics and maximum safety, the Dehler 29 is one of the best German-produced sailboats that will set you back around $55,000.

Related Articles

I've personally had thousands of questions about sailing and sailboats over the years. As I learn and experience sailing, and the community, I share the answers that work and make sense to me, here on Life of Sailing.

by this author

Best Sailboats

Most Recent

What Does "Sailing By The Lee" Mean?

October 3, 2023

The Best Sailing Schools And Programs: Reviews & Ratings

September 26, 2023

Important Legal Info

Lifeofsailing.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon. This site also participates in other affiliate programs and is compensated for referring traffic and business to these companies.

Similar Posts

Affordable Sailboats You Can Build at Home

September 13, 2023

Best Small Sailboats With Standing Headroom

December 28, 2023

Best Bluewater Sailboats Under $50K

Popular posts.

Best Liveaboard Catamaran Sailboats

Can a Novice Sail Around the World?

Elizabeth O'Malley

June 15, 2022

4 Best Electric Outboard Motors

How Long Did It Take The Vikings To Sail To England?

10 Best Sailboat Brands (And Why)

December 20, 2023

7 Best Places To Liveaboard A Sailboat

Get the best sailing content.

Top Rated Posts

Lifeofsailing.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon. This site also participates in other affiliate programs and is compensated for referring traffic and business to these companies. (866) 342-SAIL

© 2024 Life of Sailing Email: [email protected] Address: 11816 Inwood Rd #3024 Dallas, TX 75244 Disclaimer Privacy Policy

Overnight drone attack on Moscow injures 1

3rd attempt to strike capital region this week.

Social Sharing

Three Ukrainian drones attacked Moscow in the early hours on Sunday, Russian authorities said, injuring one person and prompting a temporary closure of traffic in and out of one of four airports around the Russian capital.

It was the fourth such attempt at a strike on the capital region this month and the third this week, fuelling concerns about Moscow's vulnerability to attacks as Russia's war in Ukraine drags into its 18th month.

The Russian Defence Ministry referred to the incident as an "attempted terrorist attack by the Kyiv regime" and said three drones targeted the city. One was shot down in the surrounding Moscow region by air defence systems and two others were jammed. Those two crashed into the Moscow City business district.

Photos from the site of the crash showed the facade of a skyscraper damaged on one floor. Moscow Mayor Sergei Sobyanin said the attack "insignificantly damaged" two buildings in the Moscow City district. A security guard was injured, Russia's state news agency Tass reported, citing emergency officials.

Flights delayed

No flights went into or out of Vnukovo airport on the southern outskirts of the city for about an hour, according to Tass, and the airspace over Moscow and the outlying regions was temporarily closed to all aircraft. Those restrictions have since been lifted.

Moscow authorities have also closed a street to traffic near the site of the crash in the Moscow City area.

Without directly acknowledging that Ukraine was behind the attack on Moscow, a spokesperson for the Ukrainian air force said that the Russian people were seeing the consequences of Russia's war in Ukraine.

"All of the people who think the war 'doesn't concern them,' it's already touching them," spokesperson Yurii Ihnat told journalists Sunday.

'No discussion of peace'

"There's already a certain mood in Russia: that something is flying in, and loudly," he said. "There's no discussion of peace or calm in the Russian interior any more. They got what they wanted."

Ihnat also referenced a drone attack on Russian-occupied Crimea overnight. Moscow announced Sunday that it had shot down 16 Ukrainian drones and neutralized eight more with an electronic jamming system. There were no casualties, officials said.

In Ukraine, the air force reported that it had destroyed four Russian drones above the country's Kherson and Dnipropetrovsk regions. Information on the attacks could not be independently verified.

Putin blames Ukraine for new drone attack on Moscow

Meanwhile, two people were killed and 20 wounded by a Russian missile strike late Saturday evening on the city of Sumy in northeast Ukraine. A four-storey building belonging to a vocational college was hit, the Ukrainian Interior Ministry said. Local authorities said dormitories and teaching buildings were damaged in the blast and the fire that followed.

• Ukraine is moving its Christmas Day holiday to Dec. 25 in defiance of Russia
• Russia raises maximum age for military conscription to 30

Russia's Defence Ministry reported shooting down a Ukrainian drone outside Moscow on Friday. Four days earlier, two drones struck the Russian capital, one of them falling in the centre of the city near the Defence Ministry's headquarters along the Moscow River about three kilometres from the Kremlin. The other drone hit an office building in southern Moscow, gutting several upper floors.

In another attack on July 4, the Russian military said four drones were downed by air defences on the outskirts of Moscow and a fifth was jammed by electronic warfare means and forced down.

Related Stories

• Ukraine says it sunk a Russian warship in Black Sea in drone attack
• Man admits to fatal machete attack on teenage coworker at McDonald's but pursues NCR defence
• 'Double tap' Russian strike on houses in southern Ukraine kills 16, injures dozens

2018 Primetime Emmy & James Beard Award Winner

R&K Insider

Join our newsletter to get exclusives on where our correspondents travel, what they eat, where they stay. Free to sign up.

A History of Moscow in 13 Dishes

Featured city guides.

THE 10 BEST Moscow Boat Rides & Cruises

Boat rides & cruises in moscow.

• Boat Rentals
• Scuba & Snorkeling
• Fishing Charters & Tours
• Water Sports
• Stand-Up Paddleboarding
• Surfing, Windsurfing & Kitesurfing
• Kayaking & Canoeing
• Waterskiing & Jetskiing
• Parasailing & Paragliding
• River Rafting & Tubing
• Dolphin & Whale Watching
• Speed Boats Tours
• Submarine Tours
• 5.0 of 5 bubbles
• 4.0 of 5 bubbles & up
• 3.0 of 5 bubbles & up
• 2.0 of 5 bubbles & up
• 3rd Transport Ring (TTK)
• District Central (TsAO)
• Garden Ring
• District Northern (SAO)
• Good for Big Groups
• Good for Couples
• Good for a Rainy Day
• Budget-friendly
• Good for Kids
• Hidden Gems
• Honeymoon spot
• Good for Adrenaline Seekers
• Adventurous
• Things to do ranked using Tripadvisor data including reviews, ratings, photos, and popularity.

1. Flotilla Radisson Royal

2. Moscow River Boat Tours

3. Sup-Club

4. Akvanavt Diving Centre

5. Diving Center Crocus City Oceanarium

6. CheapRussia Tours

7. Kite School Kiteclass

8. SUP Center

9. Erwin. Reka

11. Easy Russia Tour Guide

12. Lovely Russia Tours

13. Capital River Boat Tours - Moscow Centre

14. Alfa Centr

15. Diving Club Divers

16. Sup Outdoor

17. MORE MOSCOW

19. Soho Sailing Style

20. Diving Center Crocodile

21. Dive-Project

22. Mosparokhodstvo

24. Kosinskiy Children Marine Club

25. Kayak Moscow

26. DIVECLUB CHE

27. FLOW Moscow

28. Moswake

29. Morskiye Volki

30. S-cruises

What travelers are saying

• CheapRussia Tours
• Easy Russia Tour Guide
• Lovely Russia Tours
• MORE MOSCOW
• Insider Moscow Tours
• Flotilla Radisson Royal
• Moscow River Boat Tours
• Capital River Boat Tours - Moscow Centre
• Diving Center Crocus City Oceanarium

• Link copied! Clipboard

Deadly Boat crash in Collier County under investigation

According to the Florida Fish and Wildlife Conservation Commission , the boat crashed into the mangroves and ejected both passengers.

A migrant boat sinks off the Turkish coast, killing at least 22 people

ANKARA, Turkey — A rubber dinghy carrying migrants sank off Turkey’s northern Aegean coast on Friday, killing at least 22 people, officials said.

Turkish coast guard personnel rescued two migrants from the sea off the town of Eceabat in Canakkale province, while two others reached the shore by themselves and notified officials, Gov. Ilhami Aktas said.

It was not clear how many people were on the boat when it sank and the coast guard was continuing to search the area, he said.

Aktas told the state-run Anadolu Agency that seven of the dead were infants or children.

The migrants’ nationalities were not immediately known.

They were trying to reach the Greek island of Samothraki, the private Demiroren News Agency reported.

Eighteen rescue boats, a plane, two helicopters and a drone were involved in the search and rescue mission, the statement said. Ambulances were on standby at a nearby port, Anadolu reported.

Although their numbers have declined in recent years, migrants mostly from the Middle East and Africa often leave Turkey to try to reach Greece or Italy in search of a better life in European countries.

The Turkish coast guard said it caught at least 93 migrants attempting to leave the Turkish coast on boats this week.

• Election 2024
• Entertainment
• Newsletters
• Photography
• Press Releases
• Israel-Hamas War
• Russia-Ukraine War
• Global elections
• Asia Pacific
• Latin America
• Middle East
• AP Top 25 College Football Poll
• Movie reviews
• Book reviews
• Financial Markets
• Business Highlights
• Financial wellness
• Artificial Intelligence
• Social Media

A migrant boat sinks off the Turkish coast, killing at least 22 people

A member of Turkish Coastal Security uses binoculars on the Turkey’s shore of Aegean sea in Eceabat, Turkey, Friday, March 15, 2024. A rubber dinghy carrying migrants sank off Turkey’s northern Aegean coast on Friday, killing at least 22 people, officials said. (Dia Images via AP)

• Copy Link copied

ANKARA, Turkey (AP) — A rubber dinghy carrying migrants sank off Turkey’s northern Aegean coast on Friday, killing at least 22 people, officials said.

Turkish coast guard personnel rescued two migrants from the sea off the town of Eceabat in Canakkale province, while two others reached the shore by themselves and notified officials, Gov. Ilhami Aktas said.

It was not clear how many people were on the boat when it sank and the coast guard was continuing to search the area, he said.

Aktas told the state-run Anadolu Agency that seven of the dead were infants or children.

The migrants’ nationalities were not immediately known.

They were trying to reach the Greek island of Samothraki, the private Demiroren News Agency reported.

Eighteen rescue boats, a plane, two helicopters and a drone were involved in the search and rescue mission, the statement said. Ambulances were on standby at a nearby port, Anadolu reported.

Although their numbers have declined in recent years, migrants mostly from the Middle East and Africa often leave Turkey to try to reach Greece or Italy in search of a better life in European countries.

The Turkish coast guard said it caught at least 93 migrants attempting to leave the Turkish coast on boats this week.