Tayana vancouver 42
The tayana vancouver 42 is a 41.77ft cutter designed by robert harris and built in fiberglass by ta yang yacht building co. ltd. since 1979., 200 units have been built..
The Tayana vancouver 42 is a heavy sailboat which is slightly under powered. It is very stable / stiff and has an excellent righting capability if capsized. It is best suited as a heavy bluewater cruising boat. The fuel capacity is good. There is a good water supply range.
Tayana vancouver 42 for sale elsewhere on the web:
Main features
Login or register to personnalize this screen.
You will be able to pin external links of your choice.
See how Sailboatlab works in video
We help you build your own hydraulic steering system - Lecomble & Schmitt
Accommodations
Builder data, other photos.
Modal Title
The content of your modal.
Personalize your sailboat data sheet
TAYANA VANCOUVER 42 Detailed Review
If you are a boat enthusiast looking to get more information on specs, built, make, etc. of different boats, then here is a complete review of TAYANA VANCOUVER 42. Built by Ta Yang Yacht Building Co. Ltd. and designed by Robert B. Harris, the boat was first built in 1979. It has a hull type of Fin with rudder on skeg and LOA is 12.73. Its sail area/displacement ratio 14.13. Its auxiliary power tank, manufactured by Yanmar, runs on Diesel.
TAYANA VANCOUVER 42 has retained its value as a result of superior building, a solid reputation, and a devoted owner base. Read on to find out more about TAYANA VANCOUVER 42 and decide if it is a fit for your boating needs.
Boat Information
Boat specifications, sail boat calculation, rig and sail specs, auxillary power tank, accomodations, contributions, who designed the tayana vancouver 42.
TAYANA VANCOUVER 42 was designed by Robert B. Harris.
Who builds TAYANA VANCOUVER 42?
TAYANA VANCOUVER 42 is built by Ta Yang Yacht Building Co. Ltd..
When was TAYANA VANCOUVER 42 first built?
TAYANA VANCOUVER 42 was first built in 1979.
How long is TAYANA VANCOUVER 42?
TAYANA VANCOUVER 42 is 10.06 m in length.
What is mast height on TAYANA VANCOUVER 42?
TAYANA VANCOUVER 42 has a mast height of 14.84 m.
Member Boats at HarborMoor
Review of Tayana Vancouver 42
Basic specs., sailing characteristics.
This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.
What is Capsize Screening Formula (CSF)?
The capsize screening value for Tayana Vancouver 42 is 1.62, indicating that this boat could - if evaluated by this formula alone - be accepted to participate in ocean races.
What is Theoretical Maximum Hull Speed?
The theoretical maximal speed of a displacement boat of this length is 7.7 knots. The term "Theoretical Maximum Hull Speed" is widely used even though a boat can sail faster. The term shall be interpreted as above the theoretical speed a great additional power is necessary for a small gain in speed.
The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for Tayana Vancouver 42 is about 256 kg/cm, alternatively 1438 lbs/inch. Meaning: if you load 256 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 1438 lbs cargo on the boat it will sink 1 inch.
Sailing statistics
This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.
What is Motion Comfort Ratio (MCR)?
What is L/B (Length Beam Ratio)?
What is Displacement Length Ratio?
What is SA/D (Sail Area Displacement ratio)?
Maintenance
Are your sails worn out? You might find your next sail here: Sails for Sale
If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.
This section shown boat owner's changes, improvements, etc. Here you might find inspiration for your boat.
Do you have changes/improvements you would like to share? Upload a photo and describe what to look for.
We are always looking for new photos. If you can contribute with photos for Tayana Vancouver 42 it would be a great help.
If you have any comments to the review, improvement suggestions, or the like, feel free to contact us . Criticism helps us to improve.
IMAGES
VIDEO
COMMENTS
The Tayana vancouver 42 is a 41.77ft cutter designed by Robert Harris and built in fiberglass by Ta Yang Yacht Building Co. Ltd. since 1979. 200 units have been built. The Tayana vancouver 42 is a heavy sailboat which is slightly under powered. It is very stable / stiff and has an excellent righting capability if capsized.
It has a hull type of Fin with rudder on skeg and LOA is 12.73. Its sail area/displacement ratio 14.13. Its auxiliary power tank, manufactured by Yanmar, runs on Diesel. TAYANA VANCOUVER 42 has retained its value as a result of superior building, a solid reputation, and a devoted owner base.
The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for Tayana Vancouver 42 is about 256 kg/cm, alternatively 1438 lbs/inch. Meaning: if you load 256 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 1438 lbs cargo on the boat it will sink 1 inch.