SHOREMASTER LIFT ACCESSORIES
A well-designed lift looks beautiful and performs effortlessly. From Boat Lift Lifting Arm to Wheel Caddy, Bunk Boards to Cleats and Battery Trays ShoreMaster lift accessories protect your watercraft and make it easy to store it. Our diverse line of accessories fit a large range of watercraft for a customized experience.
Vinyl / Aluminum Bunks
ShoreMaster Boat Lift Bunks are designed to provide safe, non-marring protection of your boat’s hull, or your pontoons, while the watercraft is stored on the boat lift.
PRODUCT DETAILS:
- Vinyl covered aluminum bunks
- Available in 8', 11' and 14' Lengths
- Non-marring vinyl rinses clean and does not promote the adhesion of sand or debris to the bunk
WORKS WITH:
Vertical Lift
Hydraulic Lift
SPECIFICATIONS:
ShoreMaster’s full length aluminum vinyl bunks are constructed using a full length aluminum support “C” channel that is covered with high quality marine-grade vinyl for superior protection and incredible durability. ShoreMaster full length boat lift bunks are available in either 8′ (Fits ShoreMaster 1200 vertical and cantilever PWC lifts) 11′, or 14′ lengths.
PARTS AND INSTALLATION:
Installation instructions are available for all ShoreMaster docks, boat lifts and accessories. Please reference installation instructions for individual products and/or coordinating products listed in specifications. Local dealers and our Customer Support Team are also available to help answer any questions.
Find a Dealer
Get Brochure
Find Your Perfect System
- 573-873-6058
- [email protected]
- LOZ Lake Level
- LOZ Weather
Lifetime Boat Lift Bunks: Why Boaters Love Them!
LOTO Lift’s LT (Lifetime) Models now offer a choice between marine grade treated lumber or HDPE lifetime boat lift bunks !
Our new premium boat lift bunk boards are a reinforced composite that blends HDPE plastic with a fill material comprised of natural minerals.
This powerful thermoplastic polymer results in bunk boards that are super-strong and durable enough to be part of our LT Lifetime Model boat lifts. And, because no organic fills are used, there is nothing for mold or mildew to adhere to. There is nothing for water to decompose. We want to provide the best and it needs to last a lifetime. We don’t want you to ever need another boat lift bunk replacement again!
Here’s a shortlist of why boaters will prefer poly bunk boards for boat lifts:
- Super-strong and durable
- No mold or mildew
- Will not rot, crack, splinter, peel or decompose
- Resistant to fading caused by UV rays
- Smooth surface won’t scuff or scratch your hull
- Maintenance-free
- Green / Eco-friendly material approved by U.S. Green Building Council (USGBC)
- Lasts a lifetime
What is a bunk board on a boat lift?
Boat lift bunks are the rails on which your boat sits when it is lifted up out of the water. They serve a dual purpose in that they are also responsible for the alignment and placement of your boat on the lift. So as you can imagine, boat lift bunk placement and composition are extremely important.
HDPE Bunks and LT “Lifetime” boat lifts
Many of our customers and the LOTO boaters community have expressed interest in a premium long-life bunk. Always attentive to customer service, we have made the change to HDPE high-density polyethylene plastic bunk boards on our most durable lift.
By replacing the wood boat lift bunks the new rails provide a solid, non-porous dimensional profile that is extremely durable. In addition, they are maintenance-free. So they will not rot, crack, splinter, or peel when exposed to weather elements, insect attacks, and other deteriorating influences. These poly bunks are even resistant to fading caused by UV rays
One of the things that customers value is our commitment to quality. And that commitment is what drives our pursuit of manufacturing the best-built boat lifts in the industry with the longest lifespan.
The result? LOTO Lift has engineered the toughest product on the market. The LT ( or Lifetime ) Model is a side-mount lift built to withstand such rough water as the Lake of the Ozarks. You can read about them here . And now we’ve added the ultimate bunk board solution!
Keep Your Boat Hull Looking Good
The new polyethylene boat lift bunks are engineered with an ultra-smooth surface to protect your boat hull. No more worrying about the sand and debris that can get embedded in wood or carpet. Nor will you need to be concerned about exposed wood scuffing or scratching up your hull.
As a result, you can rest easy knowing that your watercraft will rest safely on the sturdy, non-marring bunk surface. Additionally, the composition of the bunk helps prevent the adherence of sand or debris. So when your boat lift isn’t in use, the HDPE surface easily rinses clean.
A Word of Caution for Pontoon Owners
While many marine retailers sell bunks, this application is not well-suited for pontoon bunks. HDPE boat lift bunks are 8-10 times harder than treated lumber and are simply too hard for the aluminum logs of a pontoon or tritoon . Therefore, we advise against purchasing a set of poly bunks for use on your pontoon lift.
For this reason, we will continue to use our compression treated boards wrapped in a marine-grade carpet for that application. Our dye-free carpet is made in the USA from 100% recycled materials.
Never replace your bunks again.
As if all these things weren’t impressive enough, the materials we’re using are green and eco-friendly, approved by U.S. Green Building Council (USGBC). So prepare to hit the water with confidence in knowing that you have the best and longest-lasting lift made for lakes in Missouri and across the U.S.
When you’ve invested so much, it just doesn’t make sense to skimp on how you dock your boat . Buy a boat lift that will last a lifetime from one of the country’s most respected manufacturers .
Certifications
Our polyethylene bunk material is certified by the following:
- International Code Council (ICC)
- U.S. Green Building Council (USGBC)
- Illinois Recycling Association (IRA)
- Better Business Bureau (BBB)
- National Recreation and Park Association (NRPA)
- Plastic Lumber Trade Association (PLTA)
Like this? Please share!
Want to learn more? Check out some of our other blog posts…
How Does A Floating Boat Lift Work?
Many boaters who enjoy the open waters want to have the ability to conveniently lift and store their boats out of the water. To facilitate
Used Boat Lifts for Sale – Craigslist Isn’t Always Helpful
A boat lift can be an excellent investment to help you dock your boat more securely. However, a brand-new boat lift might be out of
Boat Docking: What Are Boat Lifts For?
There are two common ways to approach boat docking. Firstly, you can leave your boat in the water, tied securely up at the dock. This
Comments are closed.
- Sulphur, Louisiana | Made in the USA!
- 1-800-965-8544
- [email protected]
Shopping Cart
Welcome to Lunmar Boat Lifts!
Aluminum Bunks
Product Description
lunmar's aluminum bunks come with black polyethene bunk pads. available in 4'', 8", or 10". best if used with our 834a aluminum chock brackets. price is for each bunk; two bunks are required., some bunks are sold for pickup only due to freight. please call us if you have any questions.
PRICE IS PER BUNK
Related Products
Galvanized Guide Post Bracket
Hangers / Brackets
834 Galvanized Pontoon Chock Brackets
Aluminum Guide Post Bracket
Bunk Weights
Cradle Parts
834A Aluminum Chock Bracket Sets
Aluminum Bolt Together Walkway Plank
834 Galvanized Chock Brackets
Aluminum Walkway Plank
Aluminum Stern Platform
PVC Pipe with Cap
Boat Lift Accessories
Stern Platform
- Installation Guides
- Request A Quote
Lowest Price Guarantee
About Lunmar
Find us on facebook.
Aluminum Bunks, Mounting Brackets, guide post, ect.
Our Aluminum Bunk boards are covered with UV protected vinyl and are adjustable to perfectly fit the contour of your boat.
- Track Orders
- Shopping Bag
Pivoting Bunks
Pivoting Bunks cradle and stabilize your boat in the lift. We build our bunks with durability in mind to keep your boat secure even in rough conditions. They are adjustable and available in multiple height and style options, including carpeted wood and aluminum and vinyl.
Find a Dealer
Description
These bunks are the perfect option for boaters who require a new or replacement pivot bunk for their vertical or vertical hydraulic boat lift . Designed and built to outlast many years of use.
RGC Marine’s Pivoting Bunks
- All RGC Marine Docks and Lifts come with a 15-year limited warranty on aluminum materials and workmanship in freshwater applications.
- RGC has been manufacturing quality boat lifts and docks in the United States for over 70 years.
Downloadable assembly instructions for our pivoting bunks are available in our documentation and manuals section.
Choose RGC for Your Pivoting Bunks Today
To learn more about how our pivoting bunks and other accessories can enhance the performance of your boat lift, contact us online today.
Related products
Apex Canopies
Battery Shelf
Extreme Max Power Drive
Push-Pull Power Drives with Remote Control
Guide-in & Bunk Systems
Guide-in systems, for a perfect landing every time.
Pontoon Full-Length Bunk/Guide-in System
- A bunk and guide system all-in-one for water depths of 3 feet and greater.
- Extended bunks begin guiding your pontoon 16″ before entering the lift.
- Aluminum frame with maintenance-free vinyl guide.
- Enables you to use your boat lift in shallower water because the bunks lift your boat by the frame instead of the pontoons.
- Adjustable vertically and horizontally.
Full-Length Bunk System
- Maximum boat hull support and stability.
- Strong aluminum extrusion contours to boat hull for complete support.
- Bunks can be offset towards dock for easy access in and out of your boat.
- Infinite vertical and horizontal adjustment to accommodate most boat hulls.
To Ask Questions or Buy Product by Phone or Request Installation or Repair Services
Call 800.657.9998
Monday – Friday from 8AM-5PM
10″ x 12′ Pre-Fabricated Aluminum Bunk
$ 396.72
- 6061-T6 US Aluminum
- Height: 10″
- Length: 12′
**ITEM IS OVERLENGTH- FOR COST OF SHIPPING PLEASE CALL 713-461-9443**
***All canceled orders are subject to a restocking fee, per our terms and conditions ****
Description
- Specifications
10″ x 12′ Universal Prefabricated Aluminum Bunk
- Width: 2.73″
- Black Vinyl Bunk Pad
- Delivery: Loose Beam/Freight
- No rusting or wood rot.
**ITEM IS OVERLENGTH- FOR COST OF SHIPPING PLEASE CALL 713-461-9443
Related products
12″ Chock Brackets- Galvanized
4″ x 12′ Prefabricated Bunk
10″ x 14′ pre-fabricated aluminum bunk, 10″ x 10′ pre-fabricated aluminum bunk.
- New comments
- Military Photos
- Russian Military
- Anti-Aircraft
- SA-21/S-400 Triumf
5P85TM Launch Unit for S-400
- Oct 18, 2010
Media information
Share this media.
- This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register. By continuing to use this site, you are consenting to our use of cookies. Accept Learn more…
Friday 11 April 2014
Moscow metro - spirit of a city (e.p).
No comments:
Post a comment.
QUESTIONS? CALL US AT 877.468.5438
Surestep Decking From $20
Jet Ski Lifts From $1840
Power Pedestals From $600
How to Set Up Bunks for a Tritoon Boat Lift
Posted by Boat Lift Warehouse on Sep 13th 2022
If you’ve recently bought a tritoon boat you may be wondering, ‘how do I set up bunks for a tritoon boat lift?’ Whether you currently have a boat lift you are wanting to switch over or are setting up your boat lift for the first time, here are some recommendations for setting up your cradle to accommodate a tritoon.
You must first consider whether you have an aluminum or galvanized boat lift. You need to know if your I-beams are aluminum or galvanized because mixing the two materials will cause corrosion. If you have an aluminum cradle you’re good to go, but if you have wooden bunks and are not sure, use a magnet to help you find out. A magnet will stick to steel but not aluminum.
If you have an aluminum boat lift then using aluminum bunks is a great look. They are also strong, durable, and won’t float or rot like wooden bunks.
If you have existing aluminum bunks you can move your bunks to the middle of your cradle and add two sets of bunks on either side of your original bunks – for a total of six aluminum bunks.
If you do not have existing bunks or you are wanting to upgrade from wooden to aluminum bunks you can buy a tritoon bunk kit . The kit comes with two 12-foot bunks and a set of four 4-inch bunks.
If you have existing wooden bunks you can move your bunks to the middle of your cradle and add two sets of bunks on the outside. You will need one set of 4 pontoon bunk brackets . These are v-shaped brackets that allow you to attach two wooden bunks to each bracket. You will need to buy four pieces of 2x10x10 or 2x12x12 marine-grade wood and gray bunk carpet .
If you do not have existing bunks you will need a set of 4 pontoon bunk brackets plus an additional two galvanized pontoon brackets for a total of six brackets for your tritoon. You will need to buy six pieces of 2x10x10 or 2x12x12 marine-grade wood and gray bunk carpet for your wooden bunks. Again, this gives you three sets of bunks.
If you have cradle beams that are larger than the traditional 4-6 inches tall you can use the universal bunk bracket set. You will need a set of four universal bunk brackets along with two single brackets (please note the single brackets do not come with hardware and you will need to purchase the hardware for the single brackets) and six pieces of marine-grade wood.
How do I space my bunks? The easiest way to measure the placement of your bunks is to look at your trailer and use the measurements that you already know work for your tritoon.
Whether you need to reconfigure the bunks on your existing cradle beam or you are installing your tritoon bunks for the first time, Boat Lift Warehouse has the boat lift parts you need. Visit the Boat Lift Warehouse website to order your tritoon boat lift parts today!
Recent Posts
- Ada gangways
- / Aluminum gangway
- / Boat Lifts
Nov 6th 2023
How to Choose the Right Gangway for Your Needs
Welcome to our guide on picking the right gangway for your needs. Whether you are working in the mar
- / Boathouse
Sep 27th 2023
Boat Lift Replacement Parts
Unfortunately, for a lot of boaters, the boating season is coming to an end. It’s that time of the y
- Boat Accessories
- / Boat lift
- / Boat lift accessories
Jul 27th 2023
Enhance Your Dock Experience with Top-notch Dock Accessories
Your dock is more than just a place to park your boat – it is where your boating adventures begin an
Things to Do in Elektrostal, Russia - Elektrostal Attractions
Things to do in elektrostal.
- 5.0 of 5 bubbles
- 4.0 of 5 bubbles & up
- Good for a Rainy Day
- Good for Kids
- Good for Big Groups
- Adventurous
- Budget-friendly
- Hidden Gems
- Good for Couples
- Honeymoon spot
- Good for Adrenaline Seekers
- Things to do ranked using Tripadvisor data including reviews, ratings, photos, and popularity.
1. Electrostal History and Art Museum
2. Statue of Lenin
3. Park of Culture and Leisure
4. museum and exhibition center.
5. Museum of Labor Glory
7. Galereya Kino
8. viki cinema, 9. smokygrove.
10. Gandikap
11. papa lounge bar, 12. karaoke bar.
- Statue of Lenin
- Electrostal History and Art Museum
- Park of Culture and Leisure
- Museum and Exhibition Center
- Museum of Labor Glory
First refuelling for Russia’s Akademik Lomonosov floating NPP
!{Model.Description}
The FNPP includes two KLT-40S reactor units. In such reactors, nuclear fuel is not replaced in the same way as in standard NPPs – partial replacement of fuel once every 12-18 months. Instead, once every few years the entire reactor core is replaced with and a full load of fresh fuel.
The KLT-40S reactor cores have a number of advantages compared with standard NPPs. For the first time, a cassette core was used, which made it possible to increase the fuel cycle to 3-3.5 years before refuelling, and also reduce by one and a half times the fuel component in the cost of the electricity produced. The operating experience of the FNPP provided the basis for the design of the new series of nuclear icebreaker reactors (series 22220). Currently, three such icebreakers have been launched.
The Akademik Lomonosov was connected to the power grid in December 2019, and put into commercial operation in May 2020.
Electricity generation from the FNPP at the end of 2023 amounted to 194 GWh. The population of Pevek is just over 4,000 people. However, the plant can potentially provide electricity to a city with a population of up to 100,000. The FNPP solved two problems. Firstly, it replaced the retiring capacities of the Bilibino Nuclear Power Plant, which has been operating since 1974, as well as the Chaunskaya Thermal Power Plant, which is more than 70 years old. It also supplies power to the main mining enterprises located in western Chukotka. In September, a 490 km 110 kilovolt power transmission line was put into operation connecting Pevek and Bilibino.
Image courtesy of TVEL
- Terms and conditions
- Privacy Policy
- Newsletter sign up
- Digital Edition
- Editorial Standards
COMMENTS
This homeowner wanted the ability to bunk two different boats on the same lift. Our engineers designed custom bunks for his handmade wooden boat. This delicate boat was supported by the keel and by stanchion pads. The stanchion pads could be moved out of the way to use standard aluminum bunks with his modern powerboat. Example 5.
ShoreMaster's full length aluminum vinyl bunks are constructed using a full length aluminum support "C" channel that is covered with high quality marine-grade vinyl for superior protection and incredible durability. ShoreMaster full length boat lift bunks are available in either 8′ (Fits ShoreMaster 1200 vertical and cantilever PWC ...
November 6, 2017 ·. Catamaran and pontoon owners now have a new option for their lift bunks. Sea Mount is now fabricating custom Catamaran and Pontoon bunks for our lifts, replacement cradles, and can be retrofitted to your existing lift. Our bunks are custom made to your specs from 6061 Aluminum and finished with Trex decking to match your ...
Features a 19-degree angle that securely fits the boat hull when docking. Made from 6061-T6 US aluminum. No rust or wood rot worries with the vinyl pad. The 2.7" x 8" x 12' aluminum bunk work with the 5k to 13k boat lifts and are sold individually. Comes with the hardware to attach to the bunk bracket (bracket not included).
Overview of how we converted a sling boat lift for V-hull to catamaran style lift with bunks
While many marine retailers sell bunks, this application is not well-suited for pontoon bunks. HDPE boat lift bunks are 8-10 times harder than treated lumber and are simply too hard for the aluminum logs of a pontoon or tritoon.Therefore, we advise against purchasing a set of poly bunks for use on your pontoon lift.
UNIVERSAL HULL BUNK KIT. This standard hull bunk kit allows you to add full length carpeted hull bunks to your boat lift and works for lifts up to a 4500 lb capacity. The standard kit works well for boats like runabouts, deck boats, fishing boats, and other v-hull or flat bottom boats. This bunk kit is NOT reccommended for use with ski or ...
mth180. 06-28-2016 06:24 AM. Building Catamaran Lift Bunks. 20 Attachment (s) Hey THT, I just bought a new (to me) catamaran and needed to convert my existing 10k lift into one that could support a catamaran. I searched the forum for a How-To of sorts to lead me in the right direction, but couldn't find anything super useful.
PRICE IS PER BUNK. Size. $211.68. Lunmar's aluminum bunks come with black polyethene bunk pads. Available in 4'', 8", or 10". Best if used with our 834A Aluminum Chock Brackets. Price is for each bunk; two bunks are required. Some bunks are sold for pickup only due to freight. Please call us if you have any questions!
Full Length 14' Aluminum and Vinyl bunk kit by ShoreMaster is designed for use with select ShoreMaster Vertical, Cantilever and Hydraulic hoist with lifting capacities between 3,000 - 6,000 lbs . ShoreMaster aluminum and vinyl bunks are constructed with a full length aluminum "C" channel which is then covered by a marine grade vinyl.
Aluminum Bunks, Mounting Brackets, guide post, ect. Our Aluminum Bunk boards are covered with UV protected vinyl and are adjustable to perfectly fit the contour of your boat.
All RGC Marine Docks and Lifts come with a 15-year limited warranty on aluminum materials and workmanship in freshwater applications. RGC has been manufacturing quality boat lifts and docks in the United States for over 70 years. Downloadable assembly instructions for our pivoting bunks are available in our documentation and manuals section.
A bunk and guide system all-in-one for water depths of 3 feet and greater. Extended bunks begin guiding your pontoon 16″ before entering the lift. Aluminum frame with maintenance-free vinyl guide. Enables you to use your boat lift in shallower water because the bunks lift your boat by the frame instead of the pontoons.
10″ x 12′ Universal Prefabricated Aluminum Bunk. 6061-T6 US Aluminum; Height: 10″ Length: 12′ Width: 2.73″ Black Vinyl Bunk Pad; End Caps; Delivery: Loose Beam/Freight; No rusting or wood rot. **ITEM IS OVERLENGTH- FOR COST OF SHIPPING PLEASE CALL 713-461-9443 ***All canceled orders are subject to a restocking fee, per our terms and ...
Description. The Tritoon Bunk Kit with 4-inch bunks is designed to convert your 10,000 - 13,000 lb 4-piling boat lift into a tritoon boat lift. The 4-inch aluminum bunks are made for an 8-inch I-beam. You will have no rust or wood rot worries with the vinyl pad. Mounting hardware is included.
Custom Stepped Bunks. Mini Mag w/ E-Gears. 12,500 CBX (E-Gear) 15,000 HD (Flat Plate) 2800 Grating Platform. Universal Sail Kit. Low-Profile Boat House Lift. Standard Catamaran Setup . BOAT LIFTS. S MODEL HD MODEL CBX MODEL ... FIND A DEALER. REQUEST QUOTE. REQUEST SERVICE. FAQs. REQUEST SUPPORT Boat Lifts Unlimited Inc. 1901 Betson Court ...
Bunks for boats, pontoon's and tritoons from ShoreStation, ShoreMaster and Craftlander. Call: 866-942-6349 ... Boat Lifts, Docks, Repairs Parts and Accessories! NEW Canopy Covers. SHIP FREE. MENU
Boat Lift Warehouse PWC lift bunk bracket set of 4 with fasteners for attaching to cradle arm . $58.71 Adding to cart… The item has been added. Compare Previous; 1 2 Next; Compare . 902 US-258 South PO Box 798 Snow Hill, NC 28580 Toll Free: 877-468-5438 Hours: Office M-TH 8 am - 5 pm; F 8 am - Noon ...
First S-400 btln, Elektrostal Moscow.
It has been over a year since first being introduced to Limerick based 4-piece Moscow Metro* through their wonderful debut double-A side containing the tracks "Spirit of a City" and "Cosmos" for free, which sounded near perfect in spite of the band only being together for a few months at the time of recording. Now fast-forward 12 months, and as a result of the initial love for the band, they ...
Galvanized. If you have existing wooden bunks you can move your bunks to the middle of your cradle and add two sets of bunks on the outside. You will need one set of 4 pontoon bunk brackets. These are v-shaped brackets that allow you to attach two wooden bunks to each bracket. You will need to buy four pieces of 2x10x10 or 2x12x12 marine-grade ...
1. Electrostal History and Art Museum. 2. Statue of Lenin. 3. Park of Culture and Leisure. 4. Museum and Exhibition Center. 5.
Rosatom's fuel company TVEL has supplied nuclear fuel for reactor 1 of the world's only floating NPP (FNPP), the Akademik Lomonosov, moored at the city of Pevek, in Russia's Chukotka Autonomous Okrug. The supply of fuel was transported along the Northern Sea Route. The first ever refuelling of the FNPP is planned to begin before the end of ...