sailboats great lakes

Bob Reed’s St. Clair Sailboat Center

Centrally located on the western shore of Lake St. Clair, approximately 10 miles north of Detroit.

Serving Great Lakes sailors for 45 years, we are a dealer for Jeanneau and CNB Yachts, plus we have a large selection of brokerage boats.

We are located at Detroit’s largest marine facility, Jefferson Beach Marina, featuring 800 deep water slips, restaurant & a full service facility.

We have placed cookies on your device to help make this website better.

You can use this tool to change your cookie settings. Otherwise, we’ll assume you’re OK to continue.

Some of the cookies we use opens in a new tab/window are essential for the site to work.

We also use some non-essential cookies to collect information for making reports and to help us improve the site. The cookies collect information in an anonymous form.

To control third party cookies, you can also adjust your browser settings opens in a new tab/window .

Lake Superior Yacht Sales

Sailboat & catamaran sales.

Superior Yacht Sales is your local source for brand new Jeanneau sailboats and Lagoon catamarans!

Superior Yacht Sales along with Superior Charters offers a unique opportunity to sail a variety of current Jeanneau and Lagoon boat models. In addition, if you buy a new Jeanneau or Lagoon from Superior Yacht Sales within six months of a demo trip with Superior Charters, receive 100% of your demo boat fees as credit towards the purchase price of your boat (some restrictions apply).  With boat sales continuing to hit record numbers again in 2021, we are seeing a delay in production from the factories, so plan ahead and inquire about your new boat purchase today!

Contact Superior Charters to make your reservation 715.779.5124 or  [email protected] .  

Take a tour of the Jeanneau and Lagoon line of yachts available. 

Jeanneau sailboat listings.

For sailors who take to the open waters such as Lake Superior, Jeanneau offers safe, seaworthy boats without compromise: strong and sturdy in all types of weather, comfortable while cruising, sure when the wind tests the sails and always pleasant at port. Jeanneau is proud of their values; over  60 years of adherence to the true maritime tradition – love of beautiful, fluid lines, use of state-of-the-art technologies, careful attention to functionality, security and respect for nature. These values set Jeanneau apart and enable them to build on their success in France, Europe and around the world.

Learn more about the Jeanneau lineup of sailboats and get all access tours from the Virtual Boat Show!

Sun Odyssey 349

Bareboat Charter the 2015 Sun Odyssey 349 – 3 Cabin Bella

Bareboat Charter the 2022 Sun Odyssey 349 – 2 Cabin  

2022 Jeanneau 349 to arrive in Bayfield in late July 2022!

Sun Odyssey 380

Sun Odyssey 410

Sun Odyssey 440

Bareboat Charter the 2019 Sun Odyssey 440 Guidance

Sun Odyssey 490

Jeanneau Yachts 51

Jeanneau Yachts 54

Jeanneau Yachts 60

Jeanneau Yachts 64

Sun Fast 3300

Sun Fast 3600

For Sale: 2016 Jeanneau Sun Fast 3600

Schedule a showing or plan to charter our other Jeanneau models that are listed for sale.

2019 jeanneau sun odyssey 440, 2015 jeanneau sunfast 3600, lagoon catamaran listings.

Created for family life aboard and long cruises in superb comfort, Lagoon’s practical layout and simple elegance provides just that. Lagoon has been toeing the line of avant-garde since the shipyard’s founding – they think and do things differently. Performance is measured against the test of time and Lagoon’s catamarans are known as much for their longevity and reliability as they are for their pleasurable sailing experience.   Lagoon provides trusted expertise through their global network of more than 86 dealers, who provide a level of after-sales service unlike anything else on the market.    

Explore the entire Lagoon lineup, including the newly launched

Bareboat Charter the 2019 Lagoon 40 Liberty

For Sale: 2019 Lagoon 40

2022 Lagoon 42 just arrived in Bayfield!

Lagoon SIXTY 5

Lagoon SEVENTY 7

13 Great Sailing Destinations on the Great Lakes

The Great Lakes are a hugely popular sailing destination, known for their cruising grounds and fun lakeside locations. When the temperature starts to creep up in Chicago, savvy sailors begin to turn their thoughts to days spent out on the Great Lakes - sailing, sunbathing and socializing in one of the many lakeside communities. This list brings together some of the top sailing destinations on the Great Lakes, so you can get out and enjoy them as soon as the summer hits.

13 Top Sailing Destinations on the Great Lakes:

Saugatuck, lake michigan, door county, lake michigan, erie, lake erie, endymion island, lake ontario, manitoulin island, lake huron, saint ignace island, lake superior, bad river, lake huron, bowers harbor, lake michigan, beaver island, lake michigan, the apostle islands, lake superior, michigan city, lake michigan, mackinac island, lake huron, little presque isle, lake superior.

Read on for more details on each Great Lakes destination to find one that’s right for you… or better yet, try to visit them all!

A brilliant starting point for sailing Lake Michigan. Saugatuck can be found 90 miles northwest of Chicago. The town’s harbor has capacity for over 900 boats, which is enough to demonstrate its popularity as a top Great Lakes destination for sailors. From Saugatuck harbor, it’s a short journey down the Kalamazoo River and into the channel, passing the pier heads and out into the open waters of Lake Michigan.

One of the main draws of Saugatuck is its natural beauty. From stunning views of Lake Michigan stretching to impressive sand dunes and long sandy beaches, this part of the lake is perfect if you’re looking for a picturesque sailing experience. Hike up to Mount Baldhead or ‘Mount Baldy’, an easy 1.8-mile hike, and get a new perspective on the harbor. Saugatuck is also known informally by another name, the Art Coast of Michigan, thanks to the Ox-Bow School of Arts, which is linked to the Art Institute of Chicago. It also has over 30 galleries dotted around the area.

Door County is a haven for sailors, offering scattered islands to explore, on top of the beautiful Door Peninsula itself. The Door Peninsula separates the southern area of Green Bay from Lake Michigan and from there you can sail to Washington Island, Plum Island, Cana Island, and The Grand Traverse Islands.

All these stops are perfect for hiking and the Grand Traverse Islands - Rock Island, Gull Island, Little Gull Island and Gravelly Island - are particularly rich in biodiversity. They remain almost entirely undeveloped so you can find a slice of wilderness just a short sail away. Things to look out for are rare wild orchids, butterflies and bats. The seas in this part of Lake Michigan can get choppy so choose your weather window carefully. However, in the right conditions and especially in the summer, it doesn’t get much more delightful than these sailing grounds.

The peninsula of the Presque Isle State Park provides the city of Erie with a vast natural harbor that has helped it grow into a major port city. Located in Pennsylvania, Erie is an all-round destination for visiting sailors, ideal if you’re also interested in water sports, swimming and scooting around in dinghies.

As it’s a much bigger city than many other locations on this list, Erie also has a range of marina facilities and yacht clubs to choose from, as well as restaurants, museums, water parks and hotels. The lake can get busy in mid-summer so it’s best to go earlier or later in the season to avoid the crowds - June or September are the best options.

The fourth largest of the great lakes, Lake Erie is also the shallowest and the warmest! This makes it a nice choice for swimmers, but sailors should note that the shallow depth can also lead to some impressive waves. Thanks to its clean and nutrient-rich waters, Lake Erie boasts rich biological diversity and fish numbers - this is helped by a rigorous conservation strategy that has helped to rescue Lake Erie from chronic pollution and habitat destruction in recent years.

Formed from ancient mountains, Endymion Island is a captivating sailing destination in Lake Ontario. Connecting New York’s Adirondack Mountains and The Canadian Shield or the Laurentian Plateau, Endymion island has been worn down and chiseled away by natural processes over millions of years to form the flatter landmass sailors can find today.

Endymion Island is included in Canada’s Thousand Islands National Park and is only accessible by boat. There are two public docks on the island and a good number of anchorages available. Unlike the activities and amenities on offer at other Great Lakes destinations, the appeal of Endymion Island is getting lost in a day of sailing around the surrounding islands, seeking out secret hideaways to enjoy the summer months in peace.

If you’re keen to find a more cultural destination in the Great Lakes, choose Manitoulin Island. This island, which covers an area of approximately 80-miles by 40-miles, is known for its art museums and galleries. Visitors can pass many happy hours wandering in and out of the shops and galleries, stopping for lunch or an ice cream cone or two. Little Current is the largest town on the island and it’s just 100 yards from the mainland, across the North Channel of Lake Huron.

With four marinas around the island and a great many more hidden anchorages along its shores, Manitoulin Island has much to offer intrepid sailors out on Lake Huron. However, thanks to the narrower regions of the North Channel the currents can change rapidly, making it a more challenging sail. The interior of Manitoulin Island is also striking with a number of enormous inland lakes, the biggest of which is Lake Mindamoya. The Kagawog River, which flows from Lake Kagawog to the North Channel, forms the beautiful Bridal Veil Falls near the town of Kagawog and is definitely worth a trip.

The largest and deepest of the great lakes, Lake Superior is the most challenging choice of sailing grounds among the Great Lakes. The weather can change quickly, with thick, heavy fog and fierce winds, not to mention the cold! It also happens to be the size of Austria.

Lake Superior is a truly unique sailing destination and Saint Ignace Island is an excellent place to start. One of the largest lake islands in the world, Saint Ignace offers a vast number of secluded coves, friendly campsites and stunning hiking routes. It’s also part of the Lake Superior National Marine Conservation Area. From Saint Ignace Island, you can sail round to Duncan Cove, just south of Saint Ignace Island.

Lake Huron also boasts an enormous number of stunning sailing areas and is a popular destination for many sailors looking to explore the Great Lakes. Bad River is a particularly picturesque part of the lake thanks to its collection of narrow inlets and empty wilderness.

As well as touring by boat, it’s well suited to kayaking and canoeing too. For keen fishermen, the bass, pike and walleye should be enough of a draw. One thing to watch out for around the Bad River area is shallow rocks and reefs so follow your charts and cruising directions carefully.

Known for its calm waters, Bowers Harbor is the perfect place to relax and enjoy the view, look out for Traverse City in the south. This deep, natural harbor is situated north of Power Island in West Grand Traverse Bay. It offers protection from the north and east and makes a great stopping point for picnics and sunbathing.

With a wide range of activities available on land as well as on the water, Bowers Harbor is a nice, varied destination on the Great Lakes. You might like to visit Bowers Harbor Vineyards where you can join tasting sessions and tours of the vineyards. Alternatively, you could play a round of tennis or grab a bite to eat in one of Bower Harbor’s local restaurants. When you fancy a change of scenery, sail on to Suttons Bay for more adventures. One of the best things about Michigan’s Grand Traverse Bay is that it’s about five hours from Chicago and four hours from Detroit, but it has all the drama and vast, empty space that the Northern Great Lakes are famous for.

This evocatively named archipelago, located 32 miles northwest of Charlevoix, was originally known as the land of the beavers by Odawa fishermen. Just 13 miles long and six miles wide, Beaver Island is now known for its welcoming island community, along with excellent fishing, hunting and hiking trails. The largest settlement on the island is the village of St. James, which still keeps its old world charm harking back to the original village established in the 1800s.

Beaver Island is known among fisherman as one of the top locations for fly fishing in Lake Michigan. It’s home to some of the best flats in the Great Lakes for fly fishing giant carp and it’s also an outstanding destination for smallmouth bass. Inland, the island also has four lakes with pan fish, perch, pike and largemouth bass, as well as walleye in Lake Geneserath. However, to avoid overfishing, Beaver Island residents request that if you’re visiting the inland lakes, you release the majority of your catch to preserve their stocks.

Found just off Wisconsin Shore, the Apostle Islands are a group of 21 islands close to the Bayfield Peninsula. This makes Bayfield an easy starting point for sailing between the islands and you can choose your pick of the islands to set up camp and make the most of the spectacular hiking trails crisscrossing through the interior.

This area is also known for its incredible sea caves, formed from the erosion of the iron-rich sandstone bedrock. Hollowed out by the waves, the sea caves punctuate the cliffs of the Apostle Islands, ranging from small dimples to enormous caverns. The caves are best explored by kayak or alternatively, jump into the water and swim for a closer look.

For another big city starting point on the Great Lakes, Michigan City is a popular choice. The annual In-Water Boat Show is one of the largest in the Midwest. Michigan City is also a stop in the Labor Day Tri-State Regatta, which sees sailors race from Chicago to St. Joseph to Michigan City to Chicago - it’s now been running for more than 60 years. It’s not a race for the faint hearted, to compete you’ll need endurance, determination and the wind on your side!

The first thing that strikes visitors about Mackinac Island is its tranquility. Thanks to a ban on motorized vehicles, Mackinac Island benefits from a slower, calmer pace of life. This makes it an ideal location for sailors looking for a lazier afternoon exploring the island after a good morning’s sailing.

The approach to the island involves passing under the Mackinac Bridge. The island can be found in the eastern region of the Strait of Mackinac, the stretch of water separating Lake Huron from Lake Michigan. You can moor your boat at the Mackinac Island State Harbor and venture inland. Visitors can hire bikes and breeze around the island, taking in the sights and stopping to sample some of the famous local fudge!

Twice a year, Mackinac Island becomes a hub for yachts thanks to the 333-mile annual Chicago Yacht Club Race to Mackinac and the Bayview Mackinac Race. The Chicago Yacht Club Race to Mackinac proudly holds the title of oldest annual freshwater distance race in the world, dating back to 1898.

Known as the crown jewel of Lake Superior, Little Presque Isle lies 7 miles northwest of Marquette. With thick forests and empty sandy beaches, this area is fantastically beautiful, even more so because of the rough cliffs that line the shoreline of Lake Superior over an area of 4 miles. These rocks are some of the oldest exposed formations on the lake, dated to around 2.3 billion years old. The bedrock, granitic, is also the rarest bedrock along the Great Lakes shoreline. The natural beauty of this stretch of coast is enough of a reason to visit Lake Superior this summer.

Which of these Great Lakes destinations will you choose?

Leave a comment

Own your first boat within a year on any budget.

A sailboat doesn't have to be expensive if you know what you're doing. If you want to learn how to make your sailing dream reality within a year, leave your email and I'll send you free updates . I don't like spam - I will only send helpful content.

Ready to Own Your First Boat?

Just tell us the best email address to send your tips to:

• BOAT OF THE YEAR
• Newsletters
• Sailboat Reviews
• Boating Safety
• Sailing Totem
• Charter Resources
• Destinations
• Galley Recipes
• Living Aboard
• Sails and Rigging
• Maintenance
• Best Marine Electronics & Technology

Unsalted Island Hopping in the Great Lakes

• By Mike Lee, Photos by Marianne G. Lee
• Updated: July 24, 2014

Great Lakes Sailing

As many good sailing yarns start, the fog had crept up out of nowhere, devouring our chartered 2013 Hunter 40 and making even the bow appear a distant place. It seemed all too cliché, fog engulfing the sailboat with no radar, but that was just the start of the drama. Soon it would be dark, adding to the sudden stress. Our crew, along with those on five other boats behind us in the Unsalted Island Hopping flotilla, had just entered the shipping channel in the Straits of Mackinac. Frequently, 1,000-foot lake freighters funnel through these waters at a pretty good clip. Even on sunny days smart sailors steer clear of them. It would be a long, tension-filled night until we exited the shipping channel at the south end of Gray’s Reef about 27 miles ahead. The Mackinac Bridge loomed ahead of us; at least that’s what the chart plotter was showing, and Mackinac Island was only several miles to the north, making for a good option to ditch. While our three other crewmembers were below getting some rest, the captain and I had a serious discussion about our next move. Decision time. Push on or ditch at Mackinac Island — it was that bad. Four of the boats trailing behind called in to say they had had enough and were headed to the island and a liquid dinner to settle their nerves. As safety was always our first concern, we also concluded the intelligent call was to pull the plug — the fog had trumped us. However, the one boat still behind that hadn’t turned north hailed to tell us he saw our boat on radar. He offered to be our eyes through the soup if we wanted to keep going. Suddenly the decision was easy: Press on.

Shortly thereafter, as if confirming the decision was the right one, the upper component of the fog unexpectedly lifted, while the setting sun illuminated a golden hue on the steel support towers of the Mighty Mac. However, below the bridge, fog was still a solid wall that looked like we were about to sail off the end of the world; it was the point of no return. Motoring under the bridge a short while later, our boat pushed through the curtain, popping out the other side to reveal a whole different world. There were lights on the far shore, red blinking buoys scattered in the distance and stars above, all becoming more visible by the minute. And just like that, the stress began to swirl down the drainpipe as if someone had pulled the stopper.

My wife, Marianne, and I had joined the Unsalted Island Hopping event earlier in the week. “How many islands can one flotilla tag in a week?” That was the challenge thrown down by Great Lakes Sailing Co. of Traverse City, Michigan. Unknown to most, there are plenty of islands on the upper Great Lakes just begging to be explored. Dave Conrad, owner of Great Lakes Sailing Co., has always enjoyed exploring the many islands north of Grand Traverse Bay; so, he wondered, why not turn it into an event? We had our marching orders and were ready to sail.

There are two distinct differences between the islands on the upper Great Lakes and those most anywhere else sailors cruise. One, the water is not salty, or as the local sailors like to say, it’s “unsalted.” It’s a nice feature. And two, there are no crowds. In fact, “crowd” isn’t even the right word, as the lack of any people at all is closer to the mark. Uninhabited also comes to mind when thinking about many of the islands. Surprisingly, as in the warmer cruising waters of the tropics, many of the upper Great Lakes islands have clear, beautiful turquoise water in the sandy shallows. Anchoring for the most part is easy, as there are no rocks to snag.

When Great Lakes Sailing Co. created the event, it wanted to try something different. Why not add new sailors who were studying for their ASA charter certifications to the mix? What a perfect way to get new sailors excited about cruising while checking off the ASA boxes that would allow them to charter boats for themselves. The Unsalted flotilla started off with four privately owned sailboats and four instructor-captained charter boats with students. The fleet was a blend of knowledgeable sailors and sailors eager to learn.

The group was an assorted bunch of enthusiastic people mainly from the Midwest, with some hailing from landlocked locales such as Bloomington, Indiana, and Lansing, Michigan. One fellow, Jerry Hardin, who hails from Dayton, Ohio, sailed his Catalina 400 from Port Clinton, on Lake Erie, to Grand Traverse Bay, Lake Michigan — roughly 500 miles solo — just to join in. Jerry — I like to think of him as “Sailor Jerry” after the rum — claimed the Unsalted Island Hopping was on his route anyway. Over the next two months his plan was to journey to Chicago and back, and the Island Hopping event was the halfway point. Stopping also gave his family the opportunity to jump onboard for the week. To strengthen the image of Midwest mariners, one night Sailor Jerry told the group about the great sea battle on Lake Eire against the British. What? The first thing I did was ask Professor Google, and sure enough, The Battle of Put-in-Bay took place during the War of 1812. It wasn’t a good day for the Brits.

Foggy conditions made for a tense time on approach to the Mackinac Bridge.

With sailing, things almost never go as they are supposed to. Maybe that’s the allure. The weather had its own ideas about the Island Hopping tour, and sent powerful Midwest freight train-like fronts our way even before we left the dock, as if to say, “You really ought to try something else, foolish sailors.” The fleet captains, whose first priority was safety, were wavering about even getting to some of the islands, and considered sending the flotilla to shoreside marinas where they wouldn’t have the worry of dragging an anchor in the middle of the night. Plans changed rapidly until we actually left. Then with a smirk on its face, the weather decided that rather than pound us with fronts we should try a little fog and no wind for a week of gray, damp motoring. Regardless, the Island Hopping was off and running, with our first target north to Beaver Island.

Beaver is a fairly large island by Great Lakes standards. It’s about 6 miles wide by 13 long, with an almost perfectly protected little harbor on the north end that’s surrounded by the only town, St. James. The basin is just big enough to anchor a handful of boats, and our little fleet fit nicely in there, anchored to the sandy bottom with plenty of swing room. The clear water made seeing the bottom easy, but still our boat nailed the only patch of weeds twice, which prevented the hook from holding.

The majority of the island is deep forest with very few homes and even fewer businesses. Remote is the best description I can think of. In 2010 there were approximately 650 year-round residents. I was curious what they did for work because with a two-hour ferry ride across buzz-saw waves, no one is making a daily commute to the mainland — except the guy driving the boat. The harbormaster in St. James said most of the jobs were in construction, building summer homes. Of course that slowed way down in 2008, so much less building is happening these days. Many residents now cater to tourism, which being that far north and in the middle of the lake, is a pastime with a small window of opportunity. This lack of diverse employment tends to keep Beaver Island a remote treasure for the adventurous visitor.

Our next island to conquer was the celebrated Mackinac Island, where cars are not permitted and fresh fudge is a major food group. Anchors came up and our fleet was off. But first, because many of the sailors in our group were training for various ASA certifications, it was time for a quick man-overboard drill while motoring.

Without warning, flotation cushions were flung over the side of each boat while students took the wheel to hone the rescuing skills they had only read about in books. Three of the boats, ours included, started making crazy lopsided circles and figure-eight patterns while trying to recover their fallen comrade, Red Cushion. I can only imagine the comments coming from the powerboaters who were eating breakfast and watched the sailboats scatter about like frightened gazelles. “Crazy sailors. I always knew they weren’t right in the head,” is probably not far off.

After hours of motoring through the fog, the fleet finally completed the passage from Beaver to Mackinac Island. On the way, the ASA couple on our boat wisely took advantage of our extensive motoring and cracked open their books to study.

Finally, after a long day of windless gray, and just before we tied up in the Mackinac marina, the fog lifted. There was still no wind, but there were things to see. The weather was having a good laugh on us, as if to say, “Look at all the great things you missed while you were in the fog.”

After a night on Mackinac, our flotilla targeted the town of Hessel, Michigan, as the next stop. If you know anything about upper Lake Huron geography, you’ll know Hessel does not even remotely resemble an island. Yet because it’s known as the gateway to Les Cheneaux Islands, with 36 islands just beyond the town, we decided it merited a visit. Besides, there were no rules for Unsalted Island Hopping; we were making things up as we went. The weather was making amends by offering wind and sunny skies for the day, allowing us to sail at last.

Les Cheneaux Islands are locally famous for wooden boats and the boathouses they are kept in. While uncommon on big waters of the Great Lakes, in the northwest corner of Lake Huron the traditional boathouse is thriving. They can survive the ravages of Great Lakes storms and the surge of winter ice because the islands here are packed tightly together, giving the feel and protection of the inland waters of the north woods. Our flotilla motored single file through the narrow channels between the islands — the channels are plenty deep and well marked with red buoys — not a problem for our shoal-draft fleet. But it was important everyone paid close attention to “returning” (as in every sailor’s favorite saying: “Red right returning”) because at some point when motoring all the way around an island you are not returning anymore; you’re leaving.

Inclement weather didn’t stop author Mike Lee, left, Paul Davis and Dick Chulski from sailing and having a good time.

After clicking off two more islands in our Hop, the final island night was to be spent anchored off High Island, due west of Beaver. But first the flotilla planned to travel through the night, past Mackinac Island by way of the Straits, under the Mighty Mac bridge, and finish off by exiting through the narrow channel of Gray’s Reef to get to High Island. No big deal; it was sunny, clear and breezy, so this had the makings of a fantastic passage. Three hours from the bridge, I went below to catch a nap before my night watch started. But when I popped up an hour later to check on things, the boat was socked in tight with damp, heavy fog. I’ve sailed in a lot of rough weather, but being blind in the fog is something I’ll always be uneasy with. We did, however, survive the shipping channels without incident, and eventually anchored off High Island and waited for the rest of the fleet to catch up.

High Island feels like it’s from a different time. Although it’s currently uninhabited, a small population called it home until 1940. The only things that currently exist on the island are thick forest and huge, nearly 200-foot-tall sand dunes on the western shore, with one or two hiking trails to get to them.

That final evening, our boat’s crew was invited over for steaks on Sailor Jerry’s Catalina. He had miscalculated their meat consumption-to-refrigeration ratio and something needed to be done. With seven of us all snuggled into the cockpit happily munching on beef, conversation turned to the excitement of motoring through the Straits of Mackinac’s foggy, dark shipping channels. That first night that we were considering bailing for the safety of Mackinac Island, it was Sailor Jerry who had said with confidence that he would guide us through the murk. But tonight, with a sheepish grin on his face, he confessed that the blip they had seen on radar was actually some other boat. They were certain of this fact because 20 minutes after our radio conversation, the blip turned and headed for safety on Mackinac Island. We had run down the highway with our eyes closed.

The weather had had its own idea about how the Unsalted Island Hopping flotilla should play out, and like all trips remembered years down the road, it’s usually the unplanned moments that make it memorable. In my mind, I had envisioned most days with sails full, making our way to three or four islands each day, and landing on them Shackleton style. Instead we had very little sailing, but still managed to step ashore on a few interesting islands, and came away with some good fog stories.

Who says you can only island hop in the tropics?

Mike Lee has been in the sailing industry for 26 years and is the author of a new e-book for young readers, The Boat Thief.

So Now What? by Jen Brett

You’ve taken all of your certification courses and have passed your tests. You want to take your family and friends on a bareboat charter vacation, but you feel that you still could use some support. Or, you’re an experienced sailor but are interested in chartering in a new, more challenging location. If this sounds familiar, consider joining a sailing flotilla. A flotilla brings together several boats sailing independently with their own crews and a head boat with a flotilla leader who knows the area well. The flotilla leader is available to assist with navigation and to offer local cruising information, such as which marina has the best night life or which cove has the best snorkeling.

The American Sailing Association has recently launched a website called FindMyCharter.com. It is designed to be a resource for sailors of all experience levels to find a sailing vacation, from learn-to-sail opportunities to flotillas to bareboat and crewed charters. “After certification, we suggest to students that they consider joining a flotilla so they can increase their comfort and confidence levels before heading out on a bareboat charter,” says Kathy Christensen, membership manager for the ASA. Upcoming flotilla locations include Croatia, the Bahamas and the British Virgin Islands. You can read about Cruising World Deputy Editor Elaine Lembo’s recent experience on an ASA flotilla in the Pacific Northwest .

• More: bay breeze yacht charters , Charter , Destinations , places
• More Destinations

An Oasis in the Middle of the Atlantic

Global Movement of Cruising Boats

Top 20 Cruising Destinations for Your Bucket List

Cruising Panama: A Hidden Gem

The Moorings Expands in Croatia

C-Map Updates North America Charts

New to the Fleet: Italia Yachts 12.98

St. Vincent Court Orders Deportation For Hijacking Suspects

• Digital Edition
• Customer Service
• Privacy Policy
• Terms of Use
• Email Newsletters
• Cruising World
• Florida Travel + Life
• Sailing World
• Salt Water Sportsman
• Sport Fishing
• Wakeboarding

Many products featured on this site were editorially chosen. Cruising World may receive financial compensation for products purchased through this site.

Copyright © 2024 Cruising World. A Bonnier LLC Company . All rights reserved. Reproduction in whole or in part without permission is prohibited.

US: 810-875-1546

[email protected]

10% - 20% OFF MINICAT | FREE SHIPPING ON ALL BOATS

Sailing the Great Lakes

September 15, 2021

The Great Lakes offer sailing enthusiasts of all levels plenty of opportunities to enjoy quality time outdoors. The lakes are very accessible from many regions in both the United States and Canada. Lake sailboats come in a range of styles and sizes, and the best ones are compact and worry-free.

The Great Lakes

This series of interconnected freshwater lakes is unique not just in North America, but in the entire world. They form the largest group of freshwater lakes on the planet, but they provide ocean-style fun, including rolling waves and distant horizons. The lakes are:

• Lake Superior
• Lake Michigan
• Lake Ontario

As a unique freshwater ecosystem, the region is home to plants and wildlife that can be easily enjoyed from lake sailboats. Some of the animals you might expect to see while sailing the great lakes are puffins, salmon, ducks, crabs, and beavers.

The Best Parts About Sailing The Great Lakes

Everyone from beginner to advanced sailors can find The Great Lakes ideal for a perfect day of sailing. These are just some of the many reasons locals and visitors alike enjoy sailing The Great Lakes:

• Many ports and harbors to explore dot the coastlines
• Freshwater sailing is a wonderful experience – the water is clean and the spray is refreshing
• There are no sharks to worry about
• Many natural wonders can be found, from coves and inlets to islands and peninsulas
• The scenery is beautiful
• Many parts of the region are tranquil, perfect for a day of relaxation
• There’s no need to rush or get competitive – leisure exploration is the norm here

Sailboats That Work Best On The Lakes

Because The Great Lakes offer a treasure trove of scenic beauty and natural areas that invite exploration, the best lake sailboats to use here are the ones that are smaller, easier to maneuver, and convenient for hopping on and hopping off.

Pure sailing fun is what these lakes beckon, and one of the best types of sailboats for seeing the lakes up close at your own pace is the MiniCat. This inflatable boat is easy to assemble and a breeze to sail. Both experienced and novice sailors like the performance and maneuverability these lake sailboats offer. 

MiniCat sailboats come in a wide range of sizes and bright colors. Depending on the model, they can fit two to four people comfortably and take anywhere from ten to forty minutes to assemble. They are extremely portable, which means you can drive to your favorite spot with your boat in your car, set up your sailboat in about a half hour (or less), and set sail to your favorite destinations in practically no time.

Additionally, many accessories are available to make the outing even more enjoyable. MiniCat accessories include:

• Additional front trampoline
• Protective cover
• Inflatable seats
• Carbon mast
• Pressure gauge
• Telescopic paddle

Other boats that are fun to take on the lakes include kayaks and paddleboards. Of course, the lakes are home to larger boats, too, including motorboats and yachts. But for accessibility, ease of use, transportability, and sheer fun, you can’t go wrong with a MiniCat.

Don’t Miss These Gems

Some of the unique treasures found on The Great Lakes are not to be missed! When sailing The Great Lakes, be sure to see the following (you’ll have to take many trips and set sail often to see them all):

• Saugatuck, Lake Michigan: A lakeside getaway spot that’s a delight to explore from the water as well as on foot. 
• The Apostle Islands, Lake Superior: A collection of scenic islands that are part of the National Park Service, this destination offers beaches, cliffs, lighthouses, and more.
• Mackinac Island, Lake Huron: The island is home to a state park that’s brimming with natural wonders, from sea caves to forest trails.  
• Bay of Quinte, Lake Ontario: A beautiful, extensive bay to explore, with lots of ports to stop for a bite to eat or a refreshing drink. 
• Kelleys Island, Lake Erie: An island and a village that offers natural areas to see, coastal trails to hike, and great restaurants to try. 

A big part of the fun of sailing The Great Lakes is what you’ll discover on your voyage! Once you get started, you’ll soon find new favorites you’ll want to return to again and again.

Ready To Shop For Lake Sailboats?

If sailing The Great Lakes sounds like the next great adventure you’re ready for, stop by Great Lakes Watercraft to select your perfect sailing vessel. 

As a Michigan-based family company that believes in building relationships, respecting nature, and having grand adventures, we help novice and experienced sailing enthusiasts find the perfect boat for their sailing voyages along the lakes. Get in touch with us to discover the possibilities!

Techwood Digital

Join our mailing list to receive all of our cool updates and exclusive offers!

Use this popup to embed a mailing list sign up form. Alternatively use it as a simple call to action with a link to a product or a page.

Age verification

By clicking enter you are verifying that you are old enough to consume alcohol.

Shopping Cart

Your cart is currently empty..

• Sign In or Register
• Boats for Sale
• Research Boats
• Sell a Boat
• Search Alerts
• My Listings
• Account Settings
• Dealer Advertising
• Great Lakes Sailboat

Great Lakes Sailboat Boats for sale

15 ft Capri Sailboat

Redlands, California

Posted Over 1 Month

Great condition. Includes trailer, sails, lines, mast, boom, main sail + 2 jibs.. Perfect 4 lakes or ocean. Fast and fun, ready to go!! Only $750.00 call to see 909793-3960 REDLANDS

1986 Impulse 26 Sailboat

Mentor, Ohio

1986 Impulse 26 Sailboat Beautiful and Very Well maintained Impulse 26 Sailboat. Powered by a Optional Yanmar Diesel. Trailer is included. Hull Number 18, Built in New Orleans in 1986. Fin Keel w/Spade Rudder This sailboat started out on Lake Lanier (Fresh Water) in Georgia and was then brought up to the Great Lakes. Owners have put a lot of work and money in her for performance and also to make her a solo racer. long halyards and lines to improve and ease a solo sail. Owners just put in a stereo system with new speakers and CD player with auxiliary input for phone or iPod (which has its own battery). She has a new main sail and #1 head sail (2012) and new mail sail cover. The other sails are in good shape. She has 2 other head sails (#2 and a #3) and a spinnaker. She has an inboard motor Yanmar which is very reliable. Painted both the hull and inside in 2012 and added all new running rigging. It is a single spreader 7/8 fractional rig. Also Comes with added deck hardware for an extra halyard, reef points, outhaul, and cunningham for better sail trim when racing. Last year owners did maintenance to the winches which are self-tailing. He also just put a new impeller in it and new hoses for the motor. It has a dripless shaft seal and the boat has never leaked through the shaft. Current Owners purchased the boat in 2010 the previous owner put new life lines and many other improvements like a new tiller extension in 2008. Trailer Was also painted in 2010.

ENDEAVOUR 33 SAILBOAT 1984

Rome, New York

Classic, fast shoal draft cruiser with rich teak interior, AC and heat, and lots of extras. Spacious salon. If you are in the market for your first family sailboat or looking for a vessel to explore the coastal US, then you need to see this sturdy 1984 Endeavour sailboat. Traditional layout, comfortable and ready to explore. Good setup for the solo sailor. She would also make a very nice live aboard! Current yard rent paid until October 2014. Family illness forces sale. SPECIFICATIONS LOA: 32' 7" LWL: 27' 6" Beam: 11' 6" Draft: 4' 6" Displ.: 11,350 lbs. Ballast: 4,600 lbs. enclosed lead Mast Height above DWL: 48' 9" Rigging: Masthead Sloop Sail Area: 539.5 sq. ft. Main Sail Area: 228.15 sq. ft. Fore Sail Area: (100%) 310.5 sq. ft. SA/D: 17.09 B/D: 40.50 % D/L: 244 Hull Speed: 7.3 knots PHRF - Northeast: 156 Designer: Bruce Kelley Fuel Capacity: 36 gallons Fresh Water Capacity: Approx. 56 gallons Holding Tank: 12.5 gallonsACCOMMODATIONS Spacious Saloon with beautiful solid teak doors and cabinetry throughout. Traditional layout in good condition. V-Berth forward. Salon features L-shaped port settee (converts to double) with a fold away table and starboard bench settee. Single quarter berth & navigation table to port. Galley to starboard. · Nav. Station: Flip Top chart table at forward edge of Quarter berth, three drawers, Rolled chart storage · Head: Located aft of the master to port with vanity, holding tank, head, sun shower, bulkhead mirror, three lockers, drawer, fiddled shelf storage and screened port · Teak bulkhead mounted table with hinged extension and bookshelf/cabinet behind. · Blue upholstered settees/berths in good shape · Generous lighting throughout. TV/FM coaxial cable wiring at shelf over hanging locker · Berths: 6 · Headroom: 6' 2" ENGINE & MECHANICAL · Yanmar 3GM30F Diesel, fresh water cooled, professionally and regularly maintained. · Engine hours: 1,625. · Racor fuel filter · Dripless stuffing box · 3-blade bronze prop, serviced · 36 gallon, welded aluminum fuel oil tank HULL & DECK · Solid KlegeCell foam core decks (no balsa to rot), no soft spots anywhere. No hull blisters. · Skeg mounted rudder for directional stability and strength · Anchor roller at bow · Bruce anchor w/ chain, 200’ 5/8” rode in deep bow locker, excellent condition · Secondary Danforth anchor with chain & rode · Teak hand rails · Anodized aluminum toe rails · Propane deck locker, stbd., with aluminum tank, manual & electric shut-off · West Marine propane kettle grill and canvas cover-like new · Outboard motor mount · Custom foam cockpit cushions · S/S swim ladder · Boarding gates P & S · Fenders & dock lines · Cockpit Speakers · Companionway teak boards, refinished, stow in stbd. lazarette storage pockets. · Companionway swing doors, removable (need repair HELM · Edson pedestal w/38" SS destroyer wheel with 2 instrument pods · 5” Danforth compass in SS hood · Teak folding cockpit table · Removable Edson teak drink caddy SAFETY · Type III PFD's · LifeSling · CO Monitor · Fire Extinguishers · Flare kit · 12V Bilge Pump · Manual bilge pump · First Aid Kit SALON · Spacious interior layout with large fold-out table (shelves behind) · Abundant drawer and locker storage throughout. · 10 opening ports & two large overhead hatches · Teak & holly sole in good condition · Several 12v lighting fixtures · 12 volt fan · 1 Wood framed companionway screen · 1 Wood framed hatch screen GALLEY · SS Galley Maid propane stove and oven · Large icebox with shelves · Adler Barbour 12V refrigeration · SS Sink with H/C pressure water · Microwave oven · Flo-Jet 12 Volt electric water pump, demand type with an accumulator tank. · Whale foot operated water pump in the galley (needs mounting). · Beautiful solid teak stove-top/cutting board with green Silestone insert, with storage slot · Built-in plate and utensil storage · Wine glass rack · Cookware and tableware V-BERTH · V-berth 6'6" · 12 V fan & Solar powered vent fan in hatch · 1 Wood framed Hatch screen · 2 drawers, 2 side shelves & cabinet HEAD · Enclosed head with shower & sump pump · SS sink with hot & cold pressure water · Teak cabinets and storage · Holding tank monitor · Holding Tank: 12.5 gallons with Y-valve and pump-out ELECTRONICS · Autohelm with hand-held remote · West Marine VHF580 Radio · Depth Sounder · Knot meter · Aiwa 40 watt Stereo FM/AM/Aux input with 2 interior KLH speakers and 2 cockpit speakers · Mast-mounted TV-FM antenna · Mast-top VHF antenna ELECTRICAL · 12,000 BTU CruisAir Air conditioning / heating · Breaker Panel: 12 volt DC; 110 volt AC · 4 Batteries (2-12V, 2-6V) · Battery isolator · Xantrex 40Watt multistage battery charger · 110 volt 30A Ship-to-shore cable - 50 ft. · Seaward SS water heater, 6 gallon, 115 VAC/ heat exchanger. · 2 Mast-mounted P&S deck lights · Chart table gooseneck light - red · Brinkman Q-Beam 12V Spotlight, 400,000 CP CANVAS · Two-part full-deck awning/sun-shade (a $1,400 item) · Bimini on SS frame · Helm cover · Sail Cover · Winch covers · SS dodger frame-no canvas STANDING RIGGING · Hood roller furling on head stay · SS wire standing rigging & chain plates · Four (4) each port & stbd. shrouds · Keel-stepped aluminum spar-Exc. Cond. RUNNING RIGGING · Two (2) Lewmar No. 43 two speed self-tailing primary winches w/covers. · Two (2) Lewmar No. 8 single speed mast mount halyard winches. · 2 winch handles · Harken 4:1 ball-bearing mid-boom mainsheet traveler, cabin mounted · Hardware in place / sail cover designed for lazy-jack system. Needs lines. · Genoa tracks with twin-sheet Schaeffer blocks, port and stbd. · Dacron braid sheets · Dacron braid halyards, internal & external, outhaul & topping lift · Aft turning (cheek) blocks port & stbd. SAILS · Footless main sail - new and unused · Original main sail · Genoa head sail - roller furling with UV stripe FRESH WATER TANKS · Polypropylene tank mounted below the stbd. settee, 36 gallons · Polypropylene tank located under port side aft quarter berth, est. 20 gallons, w/ separate deck fillSPARES / EXTRAS / OTHER · Includes 5 Hostar stackable jack stands for off-season layup ($1,000 value) · 4 – 10”x10”x2’ Hickory staging blocks · New Beckson port screens · Tool set in drawer · Hatch WindScoop for ventilation · Stern flagstaff & flag · All manuals, incl. Yanmar · 115VAC Vacuum cleaner · New extra odor-resistant hose for sanitary plumbing · Deck brush, cabin brush and dust pan · Boat hook · Custom compact winter cover scaffolding-ready for tarp (shown in photos) · V-belts, engine hoses, hardware, etc. RECENT UPGRADES INCLUDE · Brand new main sail - never used · Epoxy hull re-faring · Cushions covers removed, cleaned & repaired · Compass serviced · Holding tank seal maintenance, cleanout and sanitizing · New shaft zinc · Bottom paint (9/2014) · Hull polish & wax (9/2014) Work Needed: Woodwork around forward port lights in main salon needs to be repaired/replaced. Bright work: hand rails, cockpit table and taffrailNew price reflects work needed on rudder. Recent repair did not work to seal it and there is water inside. SS rudder post is good and rudder seems solid, is probably serviceable but may ultimately need better repair or replacement. Price: US $ 19,500Located in Rome, NY on the Erie Canal (accessible to Lake Champlain, the Atlantic Ocean or the Great Lakes). This vessel is sold AS IS, WHERE IS.Not included / Negotiable: 8.5' Zodiac/West Marine dinghy, RU260, with oars, pump, bag, repair kit, plus 3.3 hp Mercury outboard - excellent. $950New-in-box Lewmar 1000 Pro-Series 12V Windlass, Stainless Steel. $700Pair (2) of new Lewmar Ocean Series 16CST Self-Tailing Winches, Chromed Bronze. $950 Call: 315-733-7305 (H) Text: 315-368-4939 (C) Email: [email protected] Endeavour 33: http://www.endeavourowners.com/boats/e33/e33brochure.pdf http://sailboatdata.com/viewrecord.asp?class_id=1878 http://sailboatdata.com/view_builder.asp?builder_id=27 http://sailboatdata.com/view_designer.asp?designer_id=162 Zodiac/WM RU-260 Inflatable “Roll-Up” Dinghy: https://www.youtube.com/watch?v=Z0FSSffq5zM http://www.inriodulce.com/lostandfound/RU260.html Mercury 3.3 hp Outboard: https://www.youtube.com/watch?v=MLY-tuSCkK4 http://www.mercury-marine.eu/mercury/en/Products/Products.aspx?Model=TwoStroke%203.3 Lewmar Winch 16CST: http://lewmar.com/products.asp?id=8150&lid=25361

Classic, fast shoal draft cruiser with rich teak interior, AC and heat, and lots of extras. Spacious salon. If you are in the market for your first family sailboat or looking for a vessel to explore the coastal US, then you need to see this sturdy 1984 Endeavour sailboat. Traditional layout, comfortable and ready to explore. Good setup for the solo sailor. She would also make a very nice live aboard! Current yard rent paid until October 2014. Family illness forces sale. SPECIFICATIONS LOA: 32' 7" LWL: 27' 6" Beam: 11' 6" Draft: 4' 6" Displ.: 11,350 lbs. Ballast: 4,600 lbs. enclosed lead Mast Height above DWL: 48' 9" Rigging: Masthead Sloop Sail Area: 539.5 sq. ft. Main Sail Area: 228.15 sq. ft. Fore Sail Area: (100%) 310.5 sq. ft. SA/D: 17.09 B/D: 40.50 % D/L: 244 Hull Speed: 7.3 knots PHRF - Northeast: 156 Designer: Bruce Kelley Fuel Capacity: 36 gallons Fresh Water Capacity: Approx. 56 gallons Holding Tank: 12.5 gallonsACCOMMODATIONS Spacious Saloon with beautiful solid teak doors and cabinetry throughout. Traditional layout in good condition. V-Berth forward. Salon features L-shaped port settee (converts to double) with a fold away table and starboard bench settee. Single quarter berth & navigation table to port. Galley to starboard. · Nav. Station: Flip Top chart table at forward edge of Quarter berth, three drawers, Rolled chart storage · Head: Located aft of the master to port with vanity, holding tank, head, sun shower, bulkhead mirror, three lockers, drawer, fiddled shelf storage and screened port · Teak bulkhead mounted table with hinged extension and bookshelf/cabinet behind. · Blue upholstered settees/berths in good shape · Generous lighting throughout. TV/FM coaxial cable wiring at shelf over hanging locker · Berths: 6 · Headroom: 6' 2" ENGINE & MECHANICAL · Yanmar 3GM30F Diesel, fresh water cooled, professionally and regularly maintained. · Engine hours: 1,625. · Racor fuel filter · Dripless stuffing box · 3-blade bronze prop, serviced · 36 gallon, welded aluminum fuel oil tank HULL & DECK · Solid KlegeCell foam core decks (no balsa to rot), no soft spots anywhere. No hull blisters. · Skeg mounted rudder for directional stability and strength · Anchor roller at bow · Bruce anchor w/ chain, 200’ 5/8” rode in deep bow locker, excellent condition · Secondary Danforth anchor with chain & rode · Teak hand rails · Anodized aluminum toe rails · Propane deck locker, stbd., with aluminum tank, manual & electric shut-off · West Marine propane kettle grill and canvas cover-like new · Outboard motor mount · Custom foam cockpit cushions · S/S swim ladder · Boarding gates P & S · Fenders & dock lines · Cockpit Speakers · Companionway teak boards, refinished, stow in stbd. lazarette storage pockets. · Companionway swing doors, removable (need repair HELM · Edson pedestal w/38" SS destroyer wheel with 2 instrument pods · 5” Danforth compass in SS hood · Teak folding cockpit table · Removable Edson teak drink caddy SAFETY · Type III PFD's · LifeSling · CO Monitor · Fire Extinguishers · Flare kit · 12V Bilge Pump · Manual bilge pump · First Aid Kit SALON · Spacious interior layout with large fold-out table (shelves behind) · Abundant drawer and locker storage throughout. · 10 opening ports & two large overhead hatches · Teak & holly sole in good condition · Several 12v lighting fixtures · 12 volt fan · 1 Wood framed companionway screen · 1 Wood framed hatch screen GALLEY · SS Galley Maid propane stove and oven · Large icebox with shelves · Adler Barbour 12V refrigeration · SS Sink with H/C pressure water · Microwave oven · Flo-Jet 12 Volt electric water pump, demand type with an accumulator tank. · Whale foot operated water pump in the galley (needs mounting). · Beautiful solid teak stove-top/cutting board with green Silestone insert, with storage slot · Built-in plate and utensil storage · Wine glass rack · Cookware and tableware V-BERTH · V-berth 6'6" · 12 V fan & Solar powered vent fan in hatch · 1 Wood framed Hatch screen · 2 drawers, 2 side shelves & cabinet HEAD · Enclosed head with shower & sump pump · SS sink with hot & cold pressure water · Teak cabinets and storage · Holding tank monitor · Holding Tank: 12.5 gallons with Y-valve and pump-out ELECTRONICS · Autohelm with hand-held remote · West Marine VHF580 Radio · Depth Sounder · Knot meter · Aiwa 40 watt Stereo FM/AM/Aux input with 2 interior KLH speakers and 2 cockpit speakers · Mast-mounted TV-FM antenna · Mast-top VHF antenna ELECTRICAL · 12,000 BTU CruisAir Air conditioning / heating · Breaker Panel: 12 volt DC; 110 volt AC · 4 Batteries (2-12V, 2-6V) · Battery isolator · Xantrex 40Watt multistage battery charger · 110 volt 30A Ship-to-shore cable - 50 ft. · Seaward SS water heater, 6 gallon, 115 VAC/ heat exchanger. · 2 Mast-mounted P&S deck lights · Chart table gooseneck light - red · Brinkman Q-Beam 12V Spotlight, 400,000 CP CANVAS · Two-part full-deck awning/sun-shade (a $1,400 item) · Bimini on SS frame · Helm cover · Sail Cover · Winch covers · SS dodger frame-no canvas STANDING RIGGING · Hood roller furling on head stay · SS wire standing rigging & chain plates · Four (4) each port & stbd. shrouds · Keel-stepped aluminum spar-Exc. Cond. RUNNING RIGGING · Two (2) Lewmar No. 43 two speed self-tailing primary winches w/covers. · Two (2) Lewmar No. 8 single speed mast mount halyard winches. · 2 winch handles · Harken 4:1 ball-bearing mid-boom mainsheet traveler, cabin mounted · Hardware in place / sail cover designed for lazy-jack system. Needs lines. · Genoa tracks with twin-sheet Schaeffer blocks, port and stbd. · Dacron braid sheets · Dacron braid halyards, internal & external, outhaul & topping lift · Aft turning (cheek) blocks port & stbd. SAILS · Footless main sail - new and unused · Original main sail · Genoa head sail - roller furling with UV stripe FRESH WATER TANKS · Polypropylene tank mounted below the stbd. settee, 36 gallons · Polypropylene tank located under port side aft quarter berth, est. 20 gallons, w/ separate deck fillSPARES / EXTRAS / OTHER · Includes 5 Hostar stackable jack stands for off-season layup ($1,000 value) · 4 – 10”x10”x2’ Hickory staging blocks · New Beckson port screens · Tool set in drawer · Hatch WindScoop for ventilation · Stern flagstaff & flag · All manuals, incl. Yanmar · 115VAC Vacuum cleaner · New extra odor-resistant hose for sanitary plumbing · Deck brush, cabin brush and dust pan · Boat hook · Custom compact winter cover scaffolding-ready for tarp (shown in photos) · V-belts, engine hoses, hardware, etc. RECENT UPGRADES INCLUDE · Brand new main sail - never used · Epoxy hull re-faring · Cushions covers removed, cleaned & repaired · Compass serviced · Holding tank seal maintenance, cleanout and sanitizing · New shaft zinc · Bottom paint (9/2014) · Hull polish & wax (9/2014) Work Needed: Woodwork around forward port lights in main salon needs to be repaired/replaced. Bright work: hand rails, cockpit table and taffrail.Price: US $ 26,500Located in Rome, NY on the Erie Canal (accessible to Lake Champlain, the Atlantic Ocean or the Great Lakes). This vessel is sold AS IS, WHERE IS.Not included / Negotiable: 8.5' Zodiac/West Marine dinghy, RU260, with oars, pump, bag, repair kit, plus 3.3 hp Mercury outboard - excellent. $1,200New-in-box Lewmar 1000 Pro-Series 12V Windlass, Stainless Steel. $700Pair (2) of new Lewmar Ocean Series 16CST Self-Tailing Winches, Chromed Bronze. $950 Call: 315-733-7305 (H) Text: 315-368-4939 (C) Email: [email protected] Endeavour 33: http://www.endeavourowners.com/boats/e33/e33brochure.pdf http://sailboatdata.com/viewrecord.asp?class_id=1878 http://sailboatdata.com/view_builder.asp?builder_id=27 http://sailboatdata.com/view_designer.asp?designer_id=162 Zodiac/WM RU-260 Inflatable “Roll-Up” Dinghy: https://www.youtube.com/watch?v=Z0FSSffq5zM http://www.inriodulce.com/lostandfound/RU260.html Mercury 3.3 hp Outboard: https://www.youtube.com/watch?v=MLY-tuSCkK4 http://www.mercury-marine.eu/mercury/en/Products/Products.aspx?Model=TwoStroke%203.3 Lewmar Winch 16CST: http://lewmar.com/products.asp?id=8150&lid=25361

1960 Chris-Craft Constellation-Great Condition

New Port Richey, Florida

Make Chris-Craft

Model Constellation-Great Condition

In 1970 the original 430 Lincoln motors were replaced with 427 Ford motors. In 1999 the aft deck enclosure was changed to an EZ2CY system in sliding tracks as well as the bottom being sanded smooth and the application of VC-17 paint for improved fuel economy. Clair Shores. Other features include halon fire suppression Bennett trim tabs and a water maker. In 1999 with the new enclosure chromed rail stations and fresh paint on the hull the vessel was judged and awarded Best in its Class award at the Blue Water International Boat Festival. A buyer should instruct his agents or his surveyors to investigate such details as the buyer desires validated. This is not a restoration she has had owners who have cared for her. Throughout the years numerous upgrades and maintenance projects including painting chrome bright work accessories and interior decoration have been completed whenever needed. Boats Motor Yachts 8536 PSN . Clemens MI area who used the boat to vacation with his family in northern Lake Huron Lake Superior and on Lake St. A port side companionway leads below. In 2009 the propellers were replaced. Clair and Erie and often for charitable boat outings and in parades. She has everything you need to get you where you want to go and back home safely. Today the vessel s uniqueness and condition turns heads wherever she is. On deck we start with a teak foredeck with stainless steel bow rail wide teak side decks and wing doors to aft deck. This vessel is offered subject to prior sale price change or withdrawal without notice. These motors provided more horse power than the original motors with replacement parts more readily available. the forward stateroom has upper and lower bunks. In 1997 the motors were changed to the current set of 454 Crusaders with Borg Warner transmissions. Forward and down is a full galley with wraparound cabinets full size refrigerator built-in microwave oven and three-burner range with oven. the vessel was used for vacationing in Lakes Huron St. In 1993 the vessel ownership was transferred to the third owner s son a USCG Master Captain 100 Ton and Licensed Professional Engineer who continues to operate the boat today.In 1995 the navigation electronics were updated to the most up to date equipment at the time including GPS Loran Chart Plotter Auto Pilot and Radar all linked together via SeaTalk. the vessel was occasionally used as a press boat for the Port Huron to Mackinaw sailboat race and various other events. A convertible dinette is to starboard and seats four or sleeps two. Call now and make an appointment to see for yourself what classic boating is all about.  Motivated seller says bring offers! Dimensions Displacement: 38000 Engines Total Power: 320 Tanks Fuel: 410 Fresh Water: 200 Holding: 60 Accommodations Large windows warm wood tones and beige carpet provide a bright and airy interior. Forward is a centerline helm with original gauges Auto Helm tridata depth sounder Raytheon GPS Loran chart plotter radar and VHF radio & hailer. the second owner purchased the vessel in 1965. the first owner was an automotive dealer in the Detroit area and moored the vessel in St. Sweeping bow teak decks wood hull covered helm spacious aft deck and traditional salon make her stand out in any marina. Throughout this vessel s history it has been enjoyed by hundreds of passengers whether it was for an afternoon or on a week s voyage. Three Marine Air reverse cycle HAC units maintain interior comfort and an Onan 10kW generator provides offshore electrical power. the vessel was sold in 1978 to its current owner s family. This greatly increased the usability of the boat. There are three staterooms. the third owner of the vessel was a businessman in the steel fabrication business from the Mt. Twin 1996 Crusader 454XL Engines MSTS Ignition 5000 Series Velvet Drive Trans Four-Blade 24x20 Propellers Bennett Trim Tabs Halon Fire Suppression Onan 14kW Generator Four 30-amp Shore Powers Connections 60-amp Electrical Panel 20-gallon Water Heater Three Marine Air HAC Units Water Maker History This vessel was manufactured in Algonac Michigan purchased new in 1960 and delivered in Detroit by the Gregory Boat Company. Clair. There is a forward head compartment serving both staterooms. the vessel is not a restoration project; rather it has always been cared for in a meticulous manner. the master aft cabin has two full berths. the open salon has large windows beige carpet and warm wood tones providing a comfortable and relaxing living area. When not in use the vessel was summer stored in a covered boat well on the Clinton River in Harrison Township MI and winter stored out of the water in the same boat well. the aft deck has EZ2CY enclosure three bentwood loveseats coffee table and wet bar with refrigerator ice maker and liquor storage. In 1978 the hard top of the vessel was extended. the boat was named Tamba. Forward Guest Stateroom with Upper and Lower Bunks Forward Guest Head Mid-Cabin Stateroom with Offset Upper and Lower Berths Full Galley with Convertible Dinette Open Salon with Sleeper Sofa Twin Easy Chairs Entertainment Center and Refrigerated Wine Storage Master Aft Cabin with Two Full Size Berths and Private Head with Shower Galley Dinette seats four and sleeps two. In 2000 the vessel was awarded the Popular Choice award at the Wallaceburg Antique Motor and Boat Outing. It is important to note that this vessel has never left the fresh water of the Great Lakes and is in the condition that is today due to the its continued care and maintenance and indoor storage. U-Shaped Galley Solid Surface Counter Top Stainless Steel Double Sink Full Size Refrigerator/Freezer Three-Burner Range with Oven Built-in Microwave Oven Bridge Deck Enclosed Centerline Helm Station Aft Deck Lounge with EZ2CY Enclosure Comfortable Seating with Three Bentwood Love Seats and Large Coffee Table Wet Bar with Ice Make and Refrigerator Provide Refreshment Wing Doors to Side Decks Steps Aft to Swim Platform Electronics & Navigation Raytheon 398 GPS & Loran Raytheon 601 Chart Plotter Raytheon R40 Radar Raytheon 202 VHF Radio Raytheon 650 Auto Pilot Danforth Compass Original Gauges Deck & Hull Teak Deck Stainless Steel Bow Rail Fender Racks Teak Deck Lockers with Cushioned Seats Swim Platform Mechanical & Electrical Recent surveys available. the boat is still summer and winter stored in the same Clinton River Boat House as it has been since 1978 keeping it in its pristine condition. Whether you are planning a day on water or a weekend getaway this 50' Constellation is ready to accommodate with three staterooms. Clemens MI area who renamed the boat Arrivederci. the vessel proved to be very convenient while anchoring off shore for long periods of time with its 32 volt systems large water and holding tanks and 10 kilowatt generator. the center stateroom has offset upper and lower berths. This beautiful 50' motor yacht is exceptionally well maintained and ready to cruise. the current owner has used the vessel for vacationing and entertaining with his family and friends in Lakes Huron St. There are two easy chairs a sleeper sofa with coffee table entertainment center and even refrigerated wine storage. Clair and Erie. the aft head compartment has large shower stall. Disclaimer the Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. When not in use the vessel was summer and winter stored in a covered boat well on the Clinton River in Harrison Township MI. This Chris-Craft was re-fitted in 1996 with twin Crusader 454XL engines and is equipped with Groco oil change system Velvet Drive transmission and new four-blade propellers. He was a business man in the flower bulb business from Mt. 1960 Chris-Craft Constellation-Great Condition Location: Harrison Township MI US (LOCATION: Harrison Township MI) This 50' Chris-Craft Constellation is a fresh water time machine with classic features and drop-dead good looks...

Picaroon II Rabl designed sailboat

Watertown, New York

Make Custom Built

Model Picaroon II

Category Daysailer Sailboats

Length 18.0

"Patience" is a Picaroon II sailboat, built in 2006 by James Little of New Brunswick in 2006. This Sam S. Rabl designed sailboat is white cedar strip planking over tamarack frames. She is epoxy coated in and out. She carries a Gaff main and a small jib, totaling 227 ft/2 of sail. Included is a custom built, dual axle trailer with brakes. Patience is currently owned by a professional Great Lakes sailor. Below is a link posted by the previous owner on website DIY Boats

Sailboat -35ft Fiberglass Sloop

Port Hope, Michigan

Make Sparkman Stephens Design Chris Craft

Model CC Caribbean

Category Sloop Sailboats

Length 35.0

Sparkman Stephens designed, hand laid, thick all glass hull and deck. full keel, center cockpit, aft cabin Simple, strong, able to go anywhere - beautifully fast cruiser! True, proven classic design. All new canvas, new custom made cradle Cruise anywhere - Safe and Proud! Always on the Great Lakes! Details on request

1974 Sabre 28-1 Sailboat

Boyne City, Michigan

Length 28.0

This is the boat that started it all for Sabre. It has been a freshwater boat throughout it's life, much of it on Lake Charlevoix in Northern Michigan.New mainsail 2012, new spinnaker 2013, new genoa 2014. Has spinnaker gear. Instruments include Standard Horizon depth, speed, and wind speed and direction. Large (fairly new)Ritchie bulkhead compass. Has Harken MK III roller furling for the jib (works great). Uniden UM525 VHF radio with DSC capability and Boss 612 UA marine stereo with cabin and cockpit speakers. Atomic 4 engine runs great and has been problem free. Has a Simrad TP10 tillerpilot for automatic steering. Danforth style anchor with 150 ft of 3/4 inch rode and chain on a spool. Also has a smaller lightweight "picnic anchor". Includes a 2 burner Homestrand 206 pressurized alcohol stove. This boat has been cruised by a couple throughout the Great Lakes and lightly raced.2-Lewmar 30 self tailing winches, 2-Barlow 20s, 1 Barlow 16 (jib halyard), and 1 Barient 10 (Main and Spinnaker halyards).Shore power and Blue Sea Systems distribution panel.Includes steel cradle.

1989 Nimble Arctic 25 Sailboat

Charleston, South Carolina

Make Nimble

Model Arctic 25

Category Cruiser Motorcycles

Length 25.0

Ted Brewer design, the Arctic is a good looking rugged double-ended sharpie hull with a roomy pilothouse that sleeps 4, easily trailered to expand your favourite cruising areas.You won't find a better trailor-sailor From the Great Lakes to Maine or to the Florida Keys and The Bahamas. Launching and stepping the mast are easy as the mast has a substantial tabernacle, standing on the pilothouse I can push the mast into position. High-tech construction with Divinycell foam core in hull & Deck with vinylester gelcoat, yield a strong blister free unsinkable boat. Bronze opening ports and vents add to a classic charm, a reliable high thrust Yamaha 9.9 hp in a well pushes the boat easily. Rarely on the used marketA classic boat that stands out from the crowd. Bottom painted this monthFantastic shape in and out.1998 Yamaha 9.9 high thrust LOA 26ft LWL 24ft 2" Beam 8ft 3" Draft 2ft 6" fixed keel Displacement 2900-3600lbs Sail Area 240 sq ft tanbark, furling jib 2006 Karavan Dual Axle galvanized trailer

1988 Hunter 26.5 sloop Sailboat

Drummond, Michigan

Make Hunter

Length 26.5

The vessel is in good condition.. It comes with it's own stand. I purchased this vessel in 2008 and have used it in North Channel and surrounding waters. The boat is currently at the Drummond Island Yacht Haven.in Michigan.on it's stand. Specifications: LOA 26.5 Ft, LWL 22.5 ft, Beam 9 ft, Draft 3.6 ft, Displacement 4400 lbs, Ballast wing keel 1800 lbs, Mast hgt. 38.9ft, head room 5.6 ft, Equipment: Main sail 110% Genoa. Roller reefing jIb, storm Jib Danforth Anchor with anchor locker. Built in head with holding tank. Marine TV,TV antenna with rack for TV. AC system with 3 bank charger. Electric portable stove. Also alcohol stove, Microwave oven , stainless steel sink AC plugs throughout ship. DC lights throughout ship. Two 31 Batteries, DC voltage meter, AC circuit breakers DC circuit breakers, Ice chest, Built in boarding ladder. Horseshoe life ring. Life jackets . Electronics: 2 Lowrance HDS 8 inch chart plotters, HD Radar, depth sounder, wind instrument , Horizon fog and hailing instrument. External Speakers fore and aft. VFH radio, all accessible from cockpit. Surveyor told me rudder has a water problem common with this vessel. Each fall I drill holes in bottom of rudder, I have had no problem since. The survey on this Vessel was $12000. I have added: 2 chart plotters, a new compass, Radar, a second depth finder, 3 bank Charging system, an AC system, Hailer, Auto fog horn system, Wind gauge, Roller furling. new Jib, and TV and TV accessories. The new additions are well over $6000 I am using Navionic chips which covers all the Great Lakes and the North channel. I taught Navigation at School Craft College for many years. I feel this is the best chart system on the market as I have the capability of setting up a safe water mark on the chart. So all water 6 feet and deeper is colored white and water shallower is blue. Boat and stand are on Drummond Island. It is buyer's responsibility to pick up here. This boat has 2 chart plotters. If you want a lower price, I am willing to sell it with one chart plotter minus the radar. this price can be negotiated.

Rebel 16 Mark II Sailboat with Aluminum Trailer

Angola, Indiana

Length 16.6'

Stable fiberglass sailing boat carries six people (or 1170 pounds). Includes trailer, full rigging, and TWO suits of sails. One suit of sails is in like new condition, the other set is in very good condition. Serial number 1929 (built in late sixties to early seventies I believe). The centerboard swings up into the cockpit, so you can change the depth to dock in shallow water. The rudder also swivels up if it hits an obstruction. The trolling motor in the photos is not included. There is, however a permanent motor mount on the stern. The boat will take up to a 5hp motor, but my 30lb. thrust trolling motor drives it around just fine. The boat is located on West Otter Lake, Angola, IN. Buyer with the selling price in cash or Pay Pal payment can drive it away. (Trailer takes an 1 7/8" ball hitch.) The following article from Sailing Magazine gives a great description of Rebel sailboats. You can access the original on SailingMagazine.net. Rebel 16 2008 January 8 By Staff This nimble and tough classic is perfect for a daysail or a day of racing This year the boat that holds claim to being America's first production fiberglass one-design will celebrate its 60th birthday. That the boat is still in production makes this milestone that much more remarkable. In 1948, fresh out of the Navy, Ray Greene began building a 16-foot family daysailer out of his Toledo, Ohio, shop using a revolutionary new material called fiberglass. The design of the boat was based on lines drawn by a local high school drawing instructor by the name of Alvin Younquist. With its wide, 6-foot, 7-inch beam and 110-pound steel centerboard the stable little boat known as the Rebel soon became a hit on the Midwest's inland lakes. And while Greene said he never intended to create a racer, thanks to the boat's performance-courtesy of a large 120-square-foot main and 46-square-foot jib on a fractional rig-it wasn't long before a competitive structure was built around the boat. By 1952 a class association had been firmly established and by 1963 the class boasted 138 active members. Not bad. Fleets started popping up across the Midwest, south into Kentucky and all the way down to Texas. Meanwhile, class members could be found sailing the inland lakes of the Eastern Seaboard from New York to Florida. After 25 years of building the Rebel, with more than 3,000 hulls produced, Greene was ready to call it quits and sold the works to a group of Chicago investors. Production of the Rebel continued at a steady pace during the 1970s, and was done under a number of names: Melling Tool Co., Rebel Industries and finally Spindrift One Designs. After Spindrift folded, the Rebel moved to Michigan in 1988 when Nickels Boat Works of Fenton took over with the production of the Mark V model. Nickels continues to build the Rebel, offering buyers a choice of a daysailer version for $9,860 or the optimum racing version for $11,872 less sails and trailer. A stainless steel centerboard now comes standard with the Rebel. Nickels also continues to be a great source for parts and accessories, as well as information, on the Rebel. One tough Rebel While there have been reports of problems with the foam flotation on older boats becoming waterlogged, that has been less of a problem on boats from the 1970s and later. Other than that, a buyer of a used Rebel should find few issues with the condition of this durable little boat. Indeed, boats 25 years and older will still top regatta leaderboards. "They're well made, very rugged boats that will last forever," said Al Vorel, National Rebel Association Commodore, who has been racing the same boat, No. 3914, for almost 20 years. "You don't have to run out every 5 to 10 years to buy a new boat." This is one of the reasons for the longevity of the class. Boats tend to stay in the family, passed down from parent to child, with the younger generations wanting to keep the racing going. "My mother races, and my daughter sometimes races, so there are times we'll have three generations on the course," Vorel said. This also, of course, keeps a lot of boats off the market, and finding a used Rebel can be a bit of a challenge. But thanks to the Internet, it's possible to locate a few sellers. Prices can vary from just under $1,000 for an older boat in need of some work to $3,000 or more for a later model. Buyers can typically expect to pay in the neighborhood of $1,500 for a pre-Nickels-era boat in good shape. We were fortunate enough to find a late 1970s Rebel listed for sale on www.craigslist.org. Better yet, the seller was within trailering distance. The offer on the boat was $1,400, so we drove out to take a look. The boat was well cared for, kept under a roof winters, and showed no structural damage. Other than some algae stains and scuff marks the finish looked good, and all the gear was there, including the main and jib, which the owner said he bought new about seven years ago. We did see some possible issues, including a rusty, pitted centerboard and a wooden rudder that looked to have some rotting. So we offered to pay the full $1,400 if the owner threw in the trailer, which he originally wanted an extra $200 for. The deal was closed and we drove off with the Rebel in tow. Rebel with a cause With the boat parked in our yard the first item of business we wanted to take care of was the rusty centerboard. Nickels offers a stainless steel replacement board, and we could picture how sweet the boat would look with a shiny new stainless fin. Unfortunately, these centerboards run close to $1,000; more than two-thirds the cost of the entire boat. So such an extravagant purchase didn't make much sense. Instead we set about rehabilitating the old board. We removed, with a bit of difficulty, the 110-pound board and set in on sawhorses. The first step was to remove the old paint using paint stripper, then power sanding. We then slathered on some Duro Naval Jelly to remove the rust, wiping down everything with paper towels then finishing up with a clean, acetone-soaked rag. Next, we filled in the pits and hollows with West Marine Surfacing Putty, and sanded everything smooth. We made certain the blade was fair by running a straight edge along the board. We also further faired the rounded leading edge of the board to within the class rule limits, which prohibit tapering less than 1/16th of an inch and more than one inch in from the leading edge. We then primed the board with several coats of Interlux Primocon primer, which when dried we wet sanded with 400-grit paper, and finished with a couple coats of Interlux VC-17m Extra bottom paint. With the centerboard done, we then turned to the rudder. An ice pick determined the wood was beginning to rot near the lower trailing edge. We probably could have rehabilitated the rudder as well, but since we had saved some money by not replacing the centerboard we decided to spring for a new rudder. We opted for a fiberglass blade, supplied by Nickels for $375. This cost covered just the blade, as the original aluminum rudder cheeks and hardware were still in good shape. While we were on the phone with Nickels, we decided to order all new running rigging to replace the weathered lines the boat came with. This included lines for the cunningham, boom vang, centerboard system, as well as sheets and halyards for both main and jib. The total for 112 feet of ¼-inch line and 105 feet of 5/16-inch line came to $100. Next we took a closer look at the standing rigging. The spars showed no defects, and with a bit of metal polish and elbow grease the rotating mast, boom and aluminum whisker pole looked good as new. The 1-by-9 stainless steel shrouds and forestay also showed no visible defects. We did, however, find the diamond stays on the mast to be tuned rather tight. According to the North Sail's One-Design tuning guide for the Rebel, an overly tight diamond can limit fore and aft mast bend, and can even cause negative pre-bend, where the mast bends forward at the tip. Since we want to have a competitive boat, we loosened the diamond tension and will readjust after doing some sea trials. As we said, we ultimately wanted to race our Rebel and didn't want a slow boat. So obviously the 7-year-old suit of sails had to go. This would be our biggest expense, and a new suit of sails would alone exceed the original cost of the boat. A new main and standard jib (a light air jib is also available) from North Sails set us back $1,615, which included $20 for class royalties but not shipping. Certainly this was a blow to our budget, but we rationalized it by thinking about the fun we would be having with some close racing come summer. Our last order of business was getting our bottom clean and smooth. We first scrubbed the hull down with a detergent then wet sanded everything below the rails to a slick surface with 1,200-grit paper. After a rinse and wipe down with the hose and clean towels we were satisfied we had a slick bottom. We finished off by treating all our hardware and moving bits to a little McLube Sailkote spray. We now have what we feel will be a contender on the course for our racing crew of two. Yet, with the roomy Rebel cockpit that can seat six, we're also looking forward to some lazy summer daysailing when friends and family show up. Either way, we'll certainly get our money's worth from this tough but nimble little classic. LOA 16' 1.5" LWL 15' 10" Beam 6' 7.5" Draft 3' 4" Weight 700 lbs, Sail area 166 sq. ft.

2001 J46 sailboat sail boat J-46 sailing cruiser racing fresh water. UPGRADES!

Charlevoix, Michigan

Make J Boats

Length 46.0

Beautiful, generously equipped and meticulously cared for freshwater J46 owned by senior couple. Used only for day sailing and minimal light cruising in northern Lake Michigan, Lake Huron and Lake Charlevoix for only 12 four month seasons (was not launched in 2012 and 2013). Always kept in inside heated storage when not in the water for the four month summer season. It is in pristine condition. J/46 may be the only investment grade sailing yacht of its size not requiring professional crew to sail at designed performance levels…..or to maintain. Two people can easily manage her upwind and down to achieve the same 8 knot passage-making speeds under sail that is possible when motoring with 76hp diesel auxiliary. The joy of sailing the perfect boat is, after all, a goal we believe every owner ultimately seeks. To insure that good sailing days are spent sailing rather than scrubbing and varnishing, J/46 is designed to be virtually maintenance-free. Her exquisite joinerwork is protected from the sun……below decks where it’s beauty can be preserved More photos available in this link: https://docs.google.com/document/d/1QEllizB6x4FKTe3kGwlbjYaLgJMrQEg8x6PdVtIa14Y/pub Factory Options: Refrigeration Package: -Seafrost Mechanical Refrigeration.-Additional Plates & controls for Freezer.-Supplementary 110VAC Shore power Assist. Supplementary Power Package: -Additional 210 amp Lifeline AGM Battery for total of 630 amps for house banks (location is in lieu of nav station bottom drawer).-Heart Freedom 25 Inverter/Charger (in lieu of std ProMariner 30-3 charger).-Heart Echo Charger (to service engine start battery through AC system).-Heart Link 2000 Battery Monitor (for (2) house battery banks).-Heart Link 10 Battery Monitor (for engine battery). Supplementary Plumbing Package: -Vacuflush Forward Head.-Dockside Water Inlet.-Seagull Water Purifier in Galley. Cruising Accessory Package: -Cockpit table.-Companionway Screens Additional Single Options: -ESPAR Diesel cabin heater.-Lewmar 64 CEST Power Primary Winches.-Bolstered Ultra Suede Cushions.-Radar Mast thru deck.-Microwave in galley.-Harken adjustable Genoa car leads.-Rubrail over cove stripe-28” High Pulpits & Stanchions in lieu of std height.-Sea water wash down pump w/faucet in anchor locker.-Hall Spars Windex.-Hall Spars “NO STRIKE’ lightning dissipater.-Hall Spars GAM antenna & cable.-Hall Spars painted carbon fiber whisker pole.-Hall Spar Whisker Pole Track and Car.-Hall Spars 3rd folding mast step.-Hall spars Dutchman mast sheave.-Hall spars Dutchman Halyard.-Flag Halyard & Hardware.- S. S. Turnbuckle Covers (6).-Cockpit Full Glass and Screen Enclosure.-Dodger to Bimini Insert.-Helm Pedestal Cover.-S. S. Grab Rail along aft edge of Dodger.-S. S. Grab Rails port & starboard on Dodger sides.-S. S. Dodger & Bimini supports in lieu of straps.-S. S. Bimini handrails port & starboard.-Power engine oil pump-out system.-Max Prop 3 Blade Feathering Propeller.-Dripless shaft seal.-Memory foam mattress in forward cabin in lieu of std.-Second custom V birth insert for additional standing room.-19” HD flat panel TV and small DVR.-2nd bottom refrigerator door.-Alpine stereo AM/FM w/6 disc CD player & Bose Marine cockpit speakers.-Weems & Plath Brass Ships Clock.-Weems & Plath Brass Barometer.-Variable Speed Cabin fans fore and aft cabins and main salon.-Prime bottom plus VC-TAR plus 2 coats VC-17 anti-fouling paint.-Awlgrip Hull Flag Blue w/Red Boot Stripes.-Patriot American Flag Graphics. Sail Package (Quantum): -Kevlar/Mylar/Dacron Tri Radial Cut full Batten Main & 135% Genoa.-MC6000 105% Cruising Jib.-Antal Mast Cars.-Dutchman Flaking System.-Asymetrical Spinnaker w/deployment bag.-Antal spinnaker Snuffer.-Harken Mark II Roller Furling System. B & G Hydra 2000 Navigator Pack: -Navigator Pack, Hydra 2000, Type 2.-Standard Full Function Display Pack, Hydra 2000.-20/20 Display Pack, Hydra, Green Backlight.-20/20 Display Pack, Hydra, Red Backlight.-Depth Sensor with Bronze Flush Mount Hull Housing.-Speed Sensor with Bronze flush Mount Hull Housing.-Analog display Pack, Apparent Wind Angle, 360 degrees w/cable.-Linear Rudder Position Sensor Pack, w/installation kit for Type 2 Ram.-Pilot Ram Drive Pack, Type 2 w/cables (12Vdc, adjustable rose joint).-Cable, 213 Mast w/bkt, 80ft.-Pin, Quick Release, Pilot.-Edson J46 Tiller Arm. Raytheon Radar/Chart Plotter and Accessories: -Upper Station – 7”Color LCD Pathfinder Radar w/Raychart and 24” 4kw Raydome.-WAAS GPS Antenna.-Cmap NT Northern Michigan.-Cmap NT Lake Huron and North Channel.-Radar Cable Connector (Radar Mast Base).-Edson 3-1/2” Deluxe Mast 144”.-Edson Adapter.-Edson Radar Platform, Deluxe.-Edson Long Antenna Bracket-Starboard and Port.-Edson 28” Antenna Hoop.-Edson 13” Antenna Extension (GPS antenna mount).-Shakespear TV Antenna 2030-G. Communications Options: -ICOM M502 VHF w/ Optional Cockpit HM-127 Remote-12 Volt Pedestal Outlet-Telephone and TV cable cockpit to nav station Safety Equipment: 2 Sospenders inflatable PFD w/harness, lanyard & rearm kit1 Crewfit inflatable PFD w/harness lanyard & rearm kit2 Regular PFD w/harness & lanyard4 Regular PFD6 Throwable floatation cushions2 Jack Lines 45 ft port & starboardI Radar reflector1 Bosun chair1 Throwable Life Sling1 deployable auto inflatable Life Saver Buoy4 Fire extinguishers – various types1 Submersible Hand Held HX460S VHF Marine Transceiver w/ barometer sensor1 Throwable Rescue Line Bag1 Avon 48lb Inflatable dinghy w/ Poly pro towing line, bridle & elect pump – fits in aft cockpit locker1 Honda 2hp 4 cycle dinghy motor & aft pulpit motor mount1 Winslow 6 person Super-Light Offshore Life Raft w/ SEP packed Survival Supplies Inflatable insulated double floor Heavy duty TriPod Arch tubes w/canopySpare parts: water pump impeller, 2 Racor fuel filtersVarious sizes of tapered wood emergency thru hull plugs 1 Handheld compass1 backup Yeoman digitized chart plotter with hand-held Magellan GPSVarious rescue flares as required by Coast GuardLakes Michigan, Huron and North Channel Charts Ground Tackle: 1 44lb Spade anchor w/swivel shackle, 25ft high test 3/8” chain and 250ft 5/8” rode1 Fortress Fx-37 Alum. Anchor w/ 15ft 5/16” chain & 200ft 5/8” rode in deployable anchor bag 250ft 5/8” Line for on-shore anchoring Dock Lines & Bumpers: 3 Taylormade bumpers w/blue covers6 Yale Red Colorline braided 5/8”x40ft dock lines w/Perma Buoy chafe guards Shore Power: 1 50ft 50 amp power cable1 60ft 30 amp power cable1 Adapter 50 amp to 30 amp Maintenance equipment: 1 Universal Pole w/boat hook, 2 brush heads & curve end1 50ft water hose Note: All 4 house batteries and the engine starting battery replaced May 2015 with Lifeline AGM (house) and Optimus (engine) batteries. J/46 Specifications Hull & Deck SCRIMpTM infusion molded sandwich construction using triaxial, biaxial and unidirectional glass reinforcements with Lloyd's and ABS approved end-grained balsa core. (SCRIMpTM is the patented resin infusion molding process of TPI Technologies, Inc.)TPI transferable ten yearwarranty against hull blisters. Interplastic vinylester resin on the outer hull layer.Lead & antimony fixed 9,350 lb., 6.2' draft, and fin/bulb keel bolted to a deep molded stub.White (other light colors are optional) Gel Coat hull with double tapered bootstripe and molded indented cove stripe. White gelcoat deck with choice of five non-skid colors in tones of white, gray and beige.HUIl-to-deck joint bond,ed with 3M 5200 and Plexus MASSO on the transom, side decks are covered with a thru-bolted clear anodized aluminum toe-rail.Two lazarette lockers on fantail, port cockpit seat locker and port utility locker for helmsperson outboard of wheel. Propane locker outboard of wheel to starboard drained and vented overboard with two 10lb aluminum bottles. Molded instrument pods on port and starboard coamings and on wheel pedestal.Molded companionway seahood with integral instrument pod.(3) Oorade boxes molded integrally into deck for ventilating owner cabin, main cabin and forward head area.Molded swim platform with off-center gate and fold-up ladder.Gasketed bow anchor locker and spinnaker storage area with overboard drain.316 stainless handrails on cabin trunk (4) total.GRP molded main structural bulkhead, glassed fore & aft on hull and deck as support for shroud chainplates with single door opening to v-berth cabin.Heavy duty molded structural keel support grid including engine bed, mast step, and longitudinal stiffeners. Fabricated aluminum mast step and engine bed tapping plates molded into structural keel grid.Positive traction nonskid on horizontal deck surfaces. Propulsion & Steering Yanmar 4JH-TE turbq-charged 76 hp, 4 cylinder, diesel engine with fresh water-cooling, dual R~cor fuel filters and 150 amp alternator.Yanmar C-type recessed engine instrument panel in cockpit with Acrylic cover including gauges for tachometer, fuel level, operating hour meter, fresh water temperature, amperage, oil pressure and oil temperature. Morse-type control gear shift and throttle mounted on pedestal.Parallel fuel system with 60 gallons in primary tank below the aft starboard berth, and 30 gallons in secondary tank behind aft bulkhead to starboard. Secondary tank gravity feeds into primary for 90 gallon total capacity.Two blade 20" Max Prop with 1..25" Aquamet shaft.AquaOrive self-aligning thrust bearing to minimize shaft vibration.Ultra Sound Acoustics VO-1 00 insulation in engine compartment.Balanced spade rudder constructed with unidirectional glass and large diameter shaft mounted in Harken composite rudder bearing to exceed ABS requirements.Aluminum emergency tiller.Edson 60" diamond series aluminum wheel with leather grip.Custom molded pedestal with guard and integral binnacle, 5" Ritchie compass, 9" x 12" instrurnent mounting area & Edson thru-shaft wheel brake.(2) Teak helm-station foot braces. Interior Satin varnished cherry bulkheads and furniture panels with cold molded cherry trim, drawer and cabinet faces. Main bulkhead with single opening and recessed cherry paneled door with Mobella lock-sets. Forward and aft heads trimmed in teak.Cherry trimmed vinyl headliner throughout forward, main and aft cabins. Polyurethane teak & holly veneer floor panels with underside and end-grain sealed with epoxy.Choice of interior cushion fabric colors. (ultra-suede or ultra-leather options available)5" layered & bolstered main settee split wrap-around cushions with two-tier split backrests. 4" foam cushions in fwd and aft cabins. Large twin berth forward cabin featuring 4 drawers, 4 lockers, hinge-up bunk tops to maximize storage; hinged V-berth filler; changing seat, hanging locker w/louvered door, and bureau/vanity with 2 drawers. locker. and cabinet above with cherry louvered doors & shelf.Forward head includes vanity with mirrored acrylic slider storage, teak towel rack, mirror storage cabinet below molded sink, enclosed by cherry paneled door (on outer face) and white laminate finish on head side.Stall shower with teak slat bench seat, cabinet locker with mid-height shelf outboard, shower fixture mounted on bulkhead with adjustable shower faucet. Local self-priming pump services shower sump and drains overboard.Pilot berth in main cabin to port with small mid-height convenience shelf at aft end.Two storage cabinets with 'Iouvered doors to ~ccommodate main cabin entertainment center above starboard settee. (2) Book storage shelves between cabinets with removable cherry retainer battens.One large drawer and one locker outboard of starboard settee backrest cushions.Settee backrests of cherry veneer and cherry trim.Varnished cherry wood hull slats in main, aft and V-berth cabins.Cherry main cabin drop-leaf table with removable fiddles, two drawers and internal bottle storage.Large 30 x36 sit-down. forward-facing navigation station with hinged tabletop. Features include; outboard shelf, access to chart storage and sliding organizer tray below table top, cushioned seat of layered bolstered foam. instrument cabinet with (2) large wood panel faces hinged at the bottom for quick access, file storage drawer below nav seat to fit hanging files, binocular & misc. storage cabinet outboard of seat, and series of three utility drawers on inboard tabie support face.Starboard aft cabin with recessed cherry paneled door, hanging locker with louvered door and bureau/vanity with 2 large drawers. hinged footlocker, and cabinet with cherry louvered door & shelf. Additional drawer above engine.Aft head/shower combination accessed via cherry paneled door. wet hanging area outboard. cabinet below molded sink, mirror, (2) teak grab rails and direct access door to lazarette locker area equipped with fore and aft divider. Teak companionway steps cold molded with angled ends & Treadmaster non-skid for safe entrance and exit. Cherry overhead grab rails in main cabin.All drawers and cabinets with polished positive-latch push buttons. Galley "Wheat Matrix" Fountainhead color for counter tops with cold-molded varnished & tapered cherry fiddles.Scandvik polished 8" deep SS double sink recessed below Fountainhead on forward island with deluxe hot/cold pressure-water gooseneck faucet and manual fresh water faucet with whale foot pump. Storage areas in louvered doors below sink for cleaning supplies and garbage pail with flip lid access.6.5 cu.!!. Deluxe icebox located on center island. Features include molded GRP box insulated with Glacier Bay Ultra R vacuum insulation panels and foam top. Organizing shelves & interior light included.3.5 cu.!!. ice box, convertible to optional freezer, located outboard of sink. Featuring molded GRP box with 3-1/2" foam insulation and mounting space for refrigeration cold plates.Three-burner Force 10 propane stove/broiler/oven with thermostat control, patented slide-away oven door recess and S.S. stove bar. Additional storage foot locker below oven.Plate, bowl, cup, and glass storage compartment on bulkhead att of stove.Top access dry good storage compartment below counter top directly outboard of sink.(3) Large cabinets mounted outboard and covered by three louvered cherry doors. Aft two cabinets installed with mid-height shelves. (Optional Microwave replaces middle cabinet door and area).Dual slider cabinet, bin storag8. and AC outlet mounted below cabinets. Flatware drawer, utensil drawer and utility cabinet with mid-height shelf and louvered door under outboard counter. Sink-top cutting-board.Stainless grab post on forward inboard galley corner. Plumbing Hot & cold pressure water system with 12-gallon hot water tank and accumulator tank. Service to (2) heads, forwa~d shower, galley, & swim platform shower.Self-priming direct sump pumps for showers draining into seacocks.Automatic bilge pump with float switch and dedicated panel in nav station wired direct to DC system. 120 gallons total water capacity in (2) custom molded tanks complete with baffles, inspection ports, and secured in place below main cabin settee berths.Raritan PH-2 heads with holding tanks. Overboard "Y"- valve offshore discharge and holding tank pump out systems. Two manually operated bilge pumps, one mounted in the cockpit and another in aft head with hose to reach bilge. (ORC category 2). Electrical Standard system batteries include: (1) group 40 (210 amp) and (2) group 31 (105amp) deep cycle batteries to serve the house, and (1) Optima 1000 (1,100 CCA) battery for dedicated service to the engine. All batteries are Concorde's Lifeline AGM sealed, absorbed glass mat type series.ProMariner ProMatic 30-3 Battery Charger. Balmar 91-150 Alternator and Max Charge external regulator with temperature sensor for altemator.BattJMaxx Automatic Battery System with remote momentary parallel switch near cockpit engine panel. .Master battery switch at n~l.Vstation with 1,2,Both,Off for House batteries and single On/Off switch for engine start battery.Deluxe Bass AC/DC backlit electrical panel w/digital condition meters, circuit breakers, accommodation for optional generator installation and air conditioning systems. Panel accommodates 33 DC breakers (24 occupied w/two spare standard) and 11 AC breakers (9 standard).Navigation, steaming/foredeck, anchor and tri-color masthead lights.50 amp 11OVAC shorepower system with 6 outlets, 50ft shore power cord and Guest galvanic isolator.Bonding system to meet ABYC project E-1.Propane solenoid switch panel in galley.Ten swiveling Imtra stainless halogen reading lamps, halogen overhead lights in main cabin, flexible armed lamp at navigation station, two florescent lights, one in each head.Four Hella variable speed cabin fans over berths. Deck Hardware (2) Lewmar 64CCST self-tailing 2-speed all chrome primary winches with gear ratio of 3.1: 1 in 1 gear and power ratio of 64:1 in 2nd gear located in recessed bases on cockpit coamings. "'(2) Lewmar 54CCST self-tailing 2-speed all-chrome halyard/reef/spinnaker secondary winches on cabin trunk.(2) Lewmar 48CCST self-tailing 2-speed all-chrome mainsheet winches outboard of traveler in recessed bases. (3) Lock-in Harken Speed-Grip 10" winch handles, (2) 8" Speed-Grip handles for mainsheet. Four cockpit mounted PVC winch handle holdersThurston cockpit dodger with roll-up forward window, removable side curtains, stanchion supports and stainless grab bar on aft edge.Thurston deluxe helmsman bimini with stanchion supports & viewing window (same color as dodger).Five white acrylic cockpit cushions for helmsman and cockpit seats.(2) Harken Black Magic 3010 (1OOmm) footblocks for genoa sheets when using dodger, mounted on cockpit coamings aft of primary winctTes. (2) Harken Black Magic 3006 (75mm) double footblocks with lock-off outboard of the primaries for spinnaker sheets and checkstays.(2) Harken Black Magic 3005 (75mm) mainsheet foot blocks wllockoffs mounted on angled pads at winches.2:1 Mainsheet system consisting of (2) Harken 1969 AirBlocks (75mm) mounted on traveler and (1) 3007 AirBlock (100mm) attached to boom bale. Harken 560-S Big Boat mainsheet traveler track with Harken 1939/1935 car w/control blocks for 6:1 purchase led to both sides of cockpit to 1893 track control ends through cockpit side mounted 222 blocks to 150 cam cleats. (2) 168 swivel blocks to adjust traveler from forward or aft side of track.Single rope clutchmounted in cockpit for heads ail furling. Lewmar Concept 2 anchor windlass system with #203 ropelchain gypsy, manual override, 1S0 amp breaker in nav station, hand held control unit mounted in forward deck anchor locker. Gypsy requires 3/8" ACCO G40 or G80 chain and S/8" braided rope.Custom 316 stainless mast collar with 10 bales for halyard and reef lines and forward halyard bar. (9) Schaefer 08-0S stainless halyard and reef blocks wlinvestment cast shackles.(4) Lewmar Superlock double rope clutches, mounted in pairs forward of each secondary winch.(2) Harken 1969 (7Smm) AirBlocks shackled to U-bolts at transom corners for mainsail checkstays.(2) Harken 1969 (75mm) AirBlocks shackled to U-bolts aft on toerail for spinnaker sheets.(2) Clear anodized aluminum "T" tracks (13' x 1.25") for jib/genoa leads. Additional 3' x 1.2S" track mounted outboard of1 00% jib position for outboard lead.(2) Schaefer 32-33UC screw-pin type jib/genoa lead blocks.(2) Schaefer OS-99 snatch blocks for spinnaker twingslor outboard jib/genoa leads.(2) Stainless t-track slider cars.Asymmetric.spinnaker deck gear including: (2) Harken 1969 (75mffi1 Airblocks mounted on "U" bolts near sternpulpit and (1) 1969 75mm AirBlock mounted on anchor roller.White molded flagstaff mounted in 316 SS deck socket on aft deck edge close to centerline with 4 x 6 American flag. aRC Bow pulpit of 316 SS with double rail offshore navigation lights and forward gate.aRC Stern rails of 316 SS w/2 rail split design including a stern boarding gate to starboard and stern light. Tapered 316 SS lifeline stanchions with SS bases mounted to toe rail.Double lifelines heights to meet ORC standards with boarding gates to P&S using Gibb hooks.Padded Sunbrella lifeline covers for each lifeline outboard of helmsman's station w/color to match dodger & bimini. Two 10" bow cleats, two 8" stern cleats, two 8" amidships cleats.Custom designed 316 SS bow roller/stem~ead to accommodate Simpson-Lawrence Delta 35,45 & COR 35,45 and Bruce 45 anchors. (Optional removable anchor roller to port)Seven Lewmar Ocean series articulated, bronze tinted ac,ylic hatches: size 70 on foredeck, size 60 in main cabin, (4) size 12 over forward cabin, aft cabin, shower, and head and (1) size 10 in aft head.White framed Bomar opening ports w/screen~ in cabin trunk and in cockpit walls for aft quarter cabin and head. Acrylic companionway hatch and two-part acrylic offshore drop-boards with inside/outside opening, lockable hasp. Four 12x20 and two 12x24 poly mesh line bags, one foredeck double line-bag. .(4) Vetus 4" dorade cowl ventilators to service forward cabin and head and main cabin. Removable stainless guards for forward dorades.316 SS swim ladder with gray PVC treads mounted on swim platform. SS step with PVC tread mounted on transom. Spars & Rigging Hall Spars carbon fiber mast of pre-preg carbon fiber autoclaved at 80 PSI at 250 deg F. Mast includes double airfoil carbon spreaders, carbon gooseneck, Awlgrip off-white finish, painted black bands, wire runs in conduit, Hall/Antal mainsailJrack with loader and end fittings to accommodate sail maker provided Antal mainsail sliders and/or boltrope. Also included with the mast are; Spartite mast wedge material, offshore tricolor/anchor light, bow and deck light with SS guard andJlag halyard cheek block at masthead and cleat at deck. Hall Spars boom of 6061-T6 aluminum with off-white Awlgrip finish, welded gooseneck fitting, lug for OuikVang internal 12:1 mainsail outhaul with external cleat, bale for mainsheet block and painted black bands. Outboard end to accommodate single line reef to starboard and 2nd clew reef to port. .Hall "J" length carbon fiber whisker pole with 2 bridles and trip line, short track on front of masJ, and two deck mounted retaining clips shipped loose for owner to locate.Navtec continuous rod rigging and N690 style open body turnbuckles with headstay -17 pre-assembled for furling system, backstay -17, uppers -17, intermediates -12, lowers -22.Harken MKIII Unit 2 size furling system with airfoil performance extrusion, corrosion proof spool and drum, tapered torque tube, AirSwivel for reduced weight aloft, cast aluminum Hardcote anodized chafe guard, and all black low stretch New England adjuster line.Hall Rigging package includes; two Technora jib halyards .and one Spectra spinnaker halyard each with Tylaska T-12 SS shackles and flemish eye terminations['2:'1 ',riain halyard of Technora with Wichard #1495 shackl~, XLS Mainsheet and two traveler control adjuster'lines, two XLS-900 Spectra genoa sheets, two Maxibraid taperedSpectra spinnaker sheets, one XLS Dacron spinnaker tack line, single 3/8" Crystalyne checkstays that can beclipped forward when not in use, burgee halyard of white 5/32" Dacron cord. Three reef lines are also included; Tack reef & clew reef #1, together, are one continuous reef line to starboard. Tack reef #2 doubles as cunningham to port. Clew reef #2 is included with it's own dedicated hardware. 2:1 Whisker pole foreguy with Schaefer 504-09 block with snap shackle.Sailtech -17 Long integral hydraulic backstay adjuster. Hall D-30 aluminum Ouik-Vang w/ Harken 30:1 cascading adjuster tackle & powerful stainless return spring to lift boom in light air and support boom with sail furled, eliminating the need for a topping lift.Custom designed 316 SS chainplates, stemhead and backstay tang. Installed Package Options Refrigeration PackageSeafrost Mechanical Refrigeration.Additional Plates & Controls for Freezer Supplementary 11OVAC Shorepower Assist. Supplementary Power PackageAdditional 210 amp Lifeline AGM Battery for total of 630 amps for house banks (location is in lieu of bottom nav station drawer).Heart Freedom 25 Inverter/Charger (in lieu of standard ProMariner 30-3 charger).Heart Echo Charger (to service engine start battery through AC system).Heart Link 2000 Battery Monitor (for (2) house battery banks).Heart Link 10 Battery Monitor (for engine battery). Supplementary Plumbing Package Vacuflush Forward Head. Dockside Water Inlet.Seagull Water Purifier in Galley. Cruising Accessory Package Cockpit Table.Companionway Screens.Espar D5LC heating system with ducting into the two sleeping cabins and main cabin.Lewmar 64CEST Two Speed Electric Primary Winches.UltraSuede or UltraLeather Covered Cushions in Main Cabin (in lieu of standard).Edson Radar Mast Thru-Deck and under-deck mounting platform (for 3.5" diameter mast). Microwave Oven in GalleySea Water Washdown in Anchor Locker.Harken Adjustable Genoa Leads.Many additional photos herehttps://docs.google.com/document/d/1QEllizB6x4FKTe3kGwlbjYaLgJMrQEg8x6PdVtIa14Y/pub Manufacturer Provided Description Great boats don’t happen overnight. Helped by new materials and techniques, they evolve from the joint experiences of designer, builder and owners to become state-of-the-art. J/46 is such a vessel, inheriting the proven hull shape of the J/44, an offshore blue water classic, having won the Fastnet, Sydney-Hobart, NYYC Queen’s Cup and Trans-Atlantic races. J/44 is the only Class of yacht ever to be given its own class start by the Cruising Club of America in the Newport-Bermuda Race. To create the J/46, a foot of sailing length is added for speed; a transom swim/boarding platform for convenience; a carbon fiber mast and low VCG 6.2’ shoal draft keel for more stability; and a resin-infused, composite hull and deck for greater strength. Below decks, the choice was clear, use the same beautifully varnished cherry or teak joiner work, entertainment center and styling so highly acclaimed in our deluxe J/160. J/46 is a maxi-Ditch yacht, the tallest yacht that can fit under the bridges of the Intra-Coastal WWaterway. Yet she is non-intimidating. A high length-to-beam ratio on the waterline of this sea-kindly yacht significantly improves tracking offshore in large waves and makes sail plan balance less critical. J/46 sails with either main or jib only, always responding predictably to a light touch on the helm. Sail power with good stability allows cruising with working jib rather than large genoa. That’s less work for the crew and improved visibility for the person on the helm. J Boats’ unique spinnaker system makes downwind sailing possible for two. A modern asymmetric spinnaker attaches to the top of the anchor roller, is contained within a cockpit-controlled snuffer, and is stored, ready-to-use, in the bow locker. The spinnaker is hoisted to the masthead, 2’ above the headstay intersect, leaving space for the snuffer to shift on a jibe. Jibing is then easy. One simply lets off one spinnaker sheet and pulls in the other.

1982 S2 8.5A 28 foot Sailboat with Inboard Yanmar Diesel - In Racine Wisconsin

Racine, Wisconsin

**** PLEASE NOTE: Because of the relatively low BUY IT NOW price, payment will be due within 24 hours via paypal. I will send you a paypal invoice after a successful "BUY IT NOW" or an accepted offer. Please only buy or offer if you have positive feedback. Your buy it now or offer constitutes a binding agreement to purchase so please ask questions BEFORE clicking "BUY IT NOW" or making an offer. After receiving your payment I will overnight you the title or meet you in person depending on timing and my availability.**** Very Nice S2 8.5A (28ft) for sale in Racine Wisconsin. I'm expecting a second child soon and really don't want to sell this excellent great lakes cruiser. Clean and clear Wisconsin title.Tiller steering. (always my preference)Inboard Yanmar diesel is extremely clean and fuel efficient. Recent full Yanmar service checkout since boat was last launched.Furling headsail in good shape. Newer mainsail in excellent shape.New Raymarine autopilot professionally installed. Shore power and long power cable. Halyards in good shape.New marine head and holding tank (never used). Chainplates recently professionally rebedded by boatyard. Interior in excellent shape.Solid fiberglass hull. All tabbed in joinery in excellent shape. Cored deck with NO soft spots. Very large cockpit.Includes steel cradle as well. I looked at everything in this size and price range in the lower half of lake Michigan for two years and this is the nicest boat I could find by leaps and bounds. Solid turnkey value. Launch is all ready paid for with the boat yard. You can be in the water tomorrow. No better deal can be found on solid and ready to sail Great Lakes cruiser with a clean inboard diesel - it is just time for me to move it along. Currently out of the water at Racine Riverside Marina in Racine, WI. Summer storage is paid through the end of this month and a launch is included in the purchase. If you chose not to launch until next season the storage rates at the Marina for winter are extremely reasonable and the pre-paid launch will still be yours come next summer. Here is a Review from "Practical Sailor" S2 8.5 MeterThe 8.5 is good for cruising the coasts in comfort and style--as long as you like the modern look.When Leon Slikkers founded S2 Yachts in 1973, much of the attention to detail that had previously characterized Slickcraft powerboats—Slikkers’ earlier boatbuilding venture— traveled with him to the new boatbuilding company. In the 13 years S2 sailboats were in production (S2 still makes powerboats), the company produced a variety of modern cruising designs from the board of Arthur Edmunds, all characterized by longish fin keels, freestanding spade rudders, straight sheerlines, and a staggering variety of draft options and cockpit locations. In the early ’80s, S2 reached more for the performance market with the Grand Slam series of small boats, and the 10.3 “offshore racer-cruiser.” These higher performance boats were designed by Scott Graham and Eric Schlageter, well known for their MORC and smaller IOR designs.The S2 8.5 is a 28-footer cast in the company’s traditional mold. Her hull dimensions, sail area, displacement, and general design characteristics put her square in the middle of the modern 28-footers such as the Tanzer 8.5, Newport 28, O’Day 28, and the Pearson 28.The boat’s styling is conventionally modern. She has a fairly straight sheer, fairly high freeboard, and low, raked cabin trunk with dark tinted flush ports. Production of the 8.5 ran from 1981 to 1983. The boat was replaced by the similar S2 8.6, which continued until S2 stopped making sailboats in 1986.ConstructionThe hull of the S2 8.5 is a solid hand layup. Glasswork is excellent, and is noted by owners as one of the main considerations in buying the boat. Gelcoat quality is excellent.Slight roving printthrough is evident, but it is not objectionable. Minor hard spots are visible in the topsides, probably caused by the attachment of interior furniture and bulkheads.The deck molding is cored with end grain balsa, giving a solid feel underfoot as well as providing reasonable insulating properties.S2’s hull-to-deck joint is the basic type that we would like to see adopted throughout the industry. The hull molding has an inward-turning flange, onto which the deck molding is dropped. The joint is bedded in flexible sealant, and through bolted on six inch intervals by bolts passing through the full length slotted aluminum toerail. The joint is also through bolted across the stem.All deck hardware is properly through bolted, although pulpits, cleats, and winches merely use nuts and washers on the underside of the deck, rather than the aluminum or stainless steel backing plates we prefer.Another feature of the hull-to-deck joint is a heavy, semi-rigid vinyl rubrail at the sheerline, quite aptly termed a “crash rubrail” by S2. This will go a long way toward absorbing the shock of the inevitable encounters with docks and the other hard objects that seem to be attracted to the topsides of the typical sailboat. Although this rail is black when the boat is new, it had dulled to a chalky gray on older S2’s we examined.The builder advertises “bronze seacocks on all through hull fittings.” These are not traditional tapered plug seacocks, but are ball valves mounted directly to through hull fittings. A proper seacock—whether it uses a ball valve or a tapered plug—has a heavy flange to allow through bolting to the hull. This is an important safety feature. Should a valve seize, it may become necessary to apply a great deal of leverage to the handle in order to open or close the valve. The deeply threaded through hull stem can easily break under these conditions, and more than one boat has been lost in this manner.We also suggest that seacocks be installed on the cockpit drain scuppers and the bilge pump outlet, both of which may be under water while the boat is sailing. Light air performance would benefit by the fairing in of the through hull fittings, particularly the head intake and discharge, both of which are far enough forward to have a significant effect on water flow past the hull.Ballast is a 3,000 pound lead casting, epoxied inside a hollow keel shell. We prefer an external lead casting bolted to the hull for its shock-absorbing qualities and ease of repair. This preference was reinforced recently when we examined an old Bristol 27 just sold by a friend. The surveyor noticed dampness near the bottom of the leading edge of the keel, which showed slight external damage. Probing the loose putty revealed some abrasion of the glass keel molding. In order to sell the boat, it was necessary to grind away a large portion of the glass at the front of the keel, dry out the ballast, and reglass the lead—a job that took several days of work and cost our friend a fair chunk of money.Much of the boat’s interior structure is plywood, glassed to the hull. Fillet bonding is neat and workmanlike with no rough edges to be found.Chainplates are conventional stainless steel flat bar, bolted to bulkheads and plywood gussets in the main cabin. These are properly backed with stainless steel pads. Due to the fact that the hull is lined throughout with a carpet-like synthetic material, it is not possible to examine the bonding of the chainplate knees to the hull. The stemhead fitting is a stainless steel weldment, through bolted to the deck and hull and reinforced inside the hull with a stainless steel gusset to prevent deflection of the deck from the pull aft of the headstay. We’d like to see a metal backup pad behind this fitting rather than the washers which are used.General construction is thoughtful and well executed, with excellent glasswork, a strong and simple hull-to-deck joint, and reasonably installed hardware and fittings.Handling Under PowerAlthough some early models of the 8.5 used a seven horsepower BMW diesel, the 1982 version employs an eight horsepower Yanmar. These small Yanmars are quite impressive, light in weight and far smoother than the company’s older rockcrushers.Because of the high freeboard and considerable windage of the 8.5, the standard engine is the absolute minimum power plant for the boat. Recognizing this fact, the company offered a 15 horsepower, two-cylinder Yanmar as an option. For another 75 pounds and $1,150, we would want this option on the boat if the ability to get places under power is a real consideration.The extra fuel consumption of the larger engine will scarcely be noticed. The 18 gallon aluminum fuel tank will probably give a range under power of over 250 miles—more than adequate for a 28 foot cruising boat.The fuel tank is located under the cockpit and is securely mounted and properly grounded. There is an easily reached fuel shut off between the engine and tank. Unfortunately, the fuel fill is located in the cockpit sole. Spilled diesel oil turns even the best fiberglass nonskid into an ice skating rink. Fuel fills should be located on deck, where spills can be efficiently washed away.Engine access is via a large removable panel on the inboard face of the quarterberth. This panel lacks any kind of handhold to make it easily removable, which will discourage regular checking of the engine oil. The top companionway step also removes for access, but it’s a long reach to the dipstick.There is no oil pan under the engine. It will be necessary to be very careful when changing oil to keep the bilge clean. We have yet to see anyone change oil and filters on a boat engine without spilling something.With the quarterberth panel removed, access for routine service is excellent. The quarterberth has remarkable headroom over, so that the mechanic will not feel like a trapped spelunker after a half hour of work. Engine removal will require some joinerwork disassembly.Handling Under SailThe S2 8.5 is no slug under sail. Her PHRF rating of 174 to 180 compares very favorably to other boats of her size and type. The Sabre 28, for example, has a rating of 198. The Pearson 28 about 195, and the O’Day 28 about 198.Part of this is no doubt due to the fact that the standard sails on the boat come from the North loft. While North’s OEM sails may not be the vertical cut Mylar-Kevlar wonders that adorn custom boats, they’re a lot better than most.S2 now uses Hall spars. The simple masthead rig is extremely clean, with airfoil spreaders and internal tangs. The boom features an internal outhaul and provision for two internally-led reefing lines, with cam cleats at the forward end of the boom.The deck-stepped mast is mounted in a stainless steel deck plate incorporating plenty of holes for the attachment of blocks. Halyards and Cunningham lead aft along the cabin house top to a pair of Lewmar #8 winches. Lewmar #16s are optional, but hardly necessary.The main is controlled by a six-part Harken rig mounted on the end of the boom, and a Kenyon traveler mounted on the aft cockpit coaming. This will work fine with the tiller-steered version of the boat. With wheel steering, the mainsheet is likely to be a nuisance to the helmsman.Because of the end-of-boom sheeting, a boom vang will be essential for full mainsail control. Ironically, the boat’s drawings show almost mid-boom sheeting, with the traveler mounted on the bridgedeck at the forward end of the cockpit. This is probably a better arrangement, although it heavily loads the center of the boom and requires more sheeting force.Owners of 8.5s have little but praise for the interior of the boat. The cabin has a wide feeling, created by pushing everything outboard. The “chart area” on the plan is a myth, as far as we can tell.Despite the fact that the shrouds are set well in from the rail, the boat lacks inboard headsail tracks. Rather, you are limited to snatch blocks shackled to the toerail track. A six-foot piece of track set inboard of the rail would be a useful addition.Standard headsail sheet winches are two-speed Lewmar #30s. Options include both larger winches and self-tailers, both of which are worth considering for either racing or cruising. The cockpit coamings are wide enough for mounting larger primaries and secondaries.The high-quality rig and sails add to the price of the S2, but they are additions well worth the cost.Deck LayoutThe deck layout of the 8.5 is clean and functional, with no toe stubbers to catch you unawares. There are two foredeck mooring cleats, but no bow chocks. The necessity to lead an anchor line well off the boat’s centerline, coupled with high freeboard forward, is likely to result in a boat which sails around on her anchor or mooring. The 8.5 has a pair of wide stainless steel chafing strips at the bow which will greatly protect the deck from the chafe of the anchor line.The 8.5’s foredeck anchor well is one of the best we’ve seen. It is shallow—just deep enough to hold an anchor and adequate rode. There are double scuppers, which offer less likelihood of clogging. The lid is held on by a full-length piano hinge, and there is a positive latch.The shallow locker well above the waterline means that water is less likely to enter through the scuppers, which can be a real problem with a deep anchor well. When the bow pitches into waves, a deep anchor well can fill with water, and if the scuppers clog with debris, you can find yourself sailing around with several hundred pounds of extra weight in the worst possible position. There is no provision for securing the bitter end of the anchor rode, but a big galvanized eyebolt installed in the well by the owner will solve that one.The running lights leave something to be desired. Their location at deck level just aft of the stem makes them vulnerable to damage when handling ground tackle. We much prefer an international style bicolor mounted on the pulpit, another two feet off the water: easier to see, and out of the way. Wiring for the running lights is exposed in the anchor well, and should be secured out of the way.A recessed teak handrail runs the full length of the cabin trunk, serving the dual function of heavy weather handhold and cabin trim piece. Its shape makes it far easier to oil or varnish than the conventional round handrail, although the wide, flat section seems somewhat awkward after years of grabbing round rails.The 8.5’s cockpit is the maximum size we’d want to see on a boat of this size. The T-shape is designed to accommodate the optional wheel steerer, yielding a somewhat odd layout for the tiller-steered version. A bench seat spans the aft end of the cockpit. Although this makes good seating in port, we doubt that you’d want anyone sitting there under sail: too much weight in the end of the boat. It does make a natural helmsman’s seat for wheel steering.The engine controls and instrument panel are also located at the aft end of the cockpit, and are basically inaccessible to the helmsman of a tiller-steered version.There are two lifting lids in the aft cockpit bench, giving access to a cavernous space under the cockpit. To be useful, dacron bags should be fitted to the inside of these lockers. Then, they’ll be handy stowage for spare sheets and blocks.There are comfortable contoured seats along each side of the cockpit, with a huge locker under the port seat. Although plywood pen boards somewhat separate this locker from the engine space under the cockpit, it would be far too easy for deeply piled junk to get knocked over the board and into the engine. This locker should be partitioned into smaller spaces unless it is to be used exclusively as a sail locker.The battery boxes, fitted at the forward end of the locker, could benefit from plywood or fiberglass lids to keep battery acid off gear which might find its way onto the batteries. The box is designed to take two batteries—one battery is standard—stored in plastic containers. A single lid covering the whole box would be more efficient.The huge cockpit will accommodate up to six for sailing, and eight for in-port partying. The cockpit seat bottoms are contoured, and the cockpit coamings slope outboard for more comfortable seating. However, the seats are both too narrow and too short for sleeping.The forward end of the cockpit is protected by a narrow bridgedeck. However, the cockpit coatings extend a full foot above the level of the bridgedeck, To block the companionway to the level of the top of the coamings will require leaving two of the three drop boards in place when sailing.Although there is moderate taper to the sides of the companionway, making it easier to remove the drop boards, it is still necessary to lift each board about five inches before it can be removed. This is far safer than many tapered companionways, where boards practically fall out if you look at them wrong. The companionway slide is one of the best we’ve seen. It’s a contoured piece of acrylic fitted with a convenient grabrail. It slides easily in extruded aluminum channels, and is fitted with a fiberglass storm hood. As on many boats, the aft cabin bulkhead slopes forward, rendering it impossible to leave the drop boards out for ventilation when it rains.BelowdecksOwners consistently praise the interior design and finishing of S2 sailboats. From looking at the 8.5, it’s pretty easy to see why.There are no exposed interior fiberglass surfaces except the head floor pan molding. The hull and cabin overhead are lined with a carpet-like synthetic fabric. While this will undoubtedly cut down on condensation, we at first wondered how this fabric would hold up over time. Inevitably, the hull liner and even the overhead will get wet. In freshwater areas, this is no problem. The water will eventually evaporate. In salt water, however, wet fabric never seems to dry. Salt draws moisture like a magnet draws steel. Since first seeing this boat, however, we’ve had good experiences with the fabric. Be sure, however, to get a good wet-or-dry vacuum to keep it clean.Interior layout is fairly conventional, with Vberths forward, and immediately aft, a full width head. The head can be closed off from both the forward cabin and the main cabin with solid doors—a real luxury in a boat this size. There is a large hanging locker in the head, and reasonable storage space for toilet articles.The word for the main cabin is “wide,” with the settees pushed as far outboard as they can go. Décor is a little heavy on the teak for our taste, but it is one of the better coordinated interiors we have seen. S2 had a good interior decorator.A fold-down dining table seats four. When folded against the bulkhead, it is held in place by a single latch, which makes us nervous.Neither settee is full length. The foot of the port settee runs under the galley counter, making it long enough for sleeping, although your feet may feel a little claustrophobic in the tiny footwell.The starboard settee is an unusual configuration. The aftermost 12" of the settee folds up to form an arm rest, leaving a gap between the end of the settee and the head of the quarterberth.Inexplicably, this gap is referred to on the accommodation plan as a “charting area,” although there is neither a standard nor an optional chart table. It’s sort of like the designer ran out of energy before completing the interior design.Over the non-existent “charting area” is the best electrical panel we’ve seen on a 28 foot boat. The panel has a locking battery switch, battery test meter, and a panel with room for 14 circuit breakers, although only half are installed on the standard boat.The space is welcome, since with the proliferation of marine electronics most electrical panels are woefully inadequate.Most quarterberths tend to induce claustrophobia. That of the 8.5 is more likely to exacerbate any tendencies you might have to agoraphobia. At last, a quarterberth which will not give you a concussion when you sit bolt upright in the middle of the night after your neighbor drags down on you in a wind shift.The standard main cabin sole is carpet-covered fiberglass. For an additional $325, teak and holly was available for the traditionalist. We’d want it. Unfortunately there is no access to the bilge in the main cabin. None. This is inexcusable, and could be dangerous. A few hours with a saber saw should solve this rather basic problem.The galley is workable and accessible, with no awkward posturing required to do the dishes. The sink gets an A+. It is a full nine inches deep, is large enough to take a frying pan, and mounted close to the centerline.In contrast, the icebox gets a C-. It is larger than normal on a boat of this size, but it drains to the bilge, has a poorly insulated top, and a tiny, uninsulated hatch without a trace of a gasket. Boo.Because of limited counter space, the two burner Kenyon alcohol stove is mounted athwartships, rather than fore and aft. This means that the stove cannot be gimballed, and that it is necessary to reach across the inboard burner to reach the outboard one. Given the fact that countertop gimballed stoves are usually dangerous, the lack of gimballing doesn’t bother us much. What does bother us is that if you want to upgrade the stove to something more functional, the limited space allocated will stretch your ingenuity.A fold down table at the end of the galley counter gives additional counter space, but it must be left up in order to use the port settee for sleeping.Roominess, excellent execution, and good color coordination are trademarks of the interiors of all S2s, and the 8.5 fits well into this enviable tradition.ConclusionsThe S2 8.5 is a good boat for cruising the Great Lakes or any coast in comfort and a certain amount of style. Her appearance may be a little modern for traditionalists, with her straight sheer and European-style cabin windows.Pricey? Yes, but when you look at the things that go into the boat—the rig, good sails, and a comfortable, well finished interior—the price may seem a bit less painful. You still pay for what you get.

Catalina 30' sailboat,new sails and atomic4 inboard, tall rig.tiller,cradle.

Penn Yan, New York

This 1978 C 30 Catalina was made for light ocean cruising, not just bay sailing, but probably not trans- oceanic sailing. The interior is in remarkably good condition with no midew,mold, oil stains etc. Has an alcohol stove top (needs new gaskets) and ice box ,sleeps six in three different areas.Almost new Harstick sails included main ,half jib, 360 full jib and spinnaker with pole.Large anchor with 20' heavy chain.Teak interior trim, head with shower,storage closet and pennisula galley,good head room.Boat comes with solid steel cradle good enough to ship on.Currently at anchor on Keuka Lake, the boat is kept in Hammondsport over winter at a cost of $450( this includes out and in haul and storage of the cradle through the sailing season). Marina has the capability to transport this boat, nearby Seneca lake has access to the Barge canal and therefore the Great Lakes and the Atlantic (drive train would need repair for the canal as no sailing allowed).The inboard as is is fine for leaving and returning to anchorage.(30-45 minutes at a time).Boat has the tall rig, a tiller and deep keel,sails upwind great ,These boats are one of the best and have outsold all other boats this size combined! There is a support group. I have to sell as I am moving to Florida and can't manage to get it there.Please call me before making an offer at 315-729-8120.

1978 Ranger Yachts 33R

Port Huron, Michigan

Make Ranger Yachts

Category Cruiser

Posted 3 Weeks Ago

This 1978 Ranger 33R sailboat appears in great shape for a vessel this age. The seller did a long list of upgrades 2-3 years ago, and she's ready for new sailing adventures. We're told all systems work as they should. Looking for offers! Stock #371031 Well maintained 1978 Ranger 33R! Very well equipped and ready to sail! Check out this 1978 Ranger 33R sailboat! The Ranger Yacht division of Jensen Marine was created in 1969 to build performance-oriented boats designed by Gary Mull. She's good-looking, well-balanced, and sails well on all points of sail. She has a bright, airy interior, plus a comfortable cockpit, and is easily converted from racer to cruiser and back again with minimal effort. Today, after all these years after their introduction, Ranger 33s are still popular as both easy-sailing club racers and bargain cruisers. The interior of the Ranger 33 is quite livable for two people, and even for four for short cruises. The boat has sleeping accommodations for 6 with a galley and dinette There's 6' 2" of headroom on the centerline in the main cabin. The headroom is fairly constant throughout the boat, as the top of the cabin is parallel to the cabin sole. Electronics consists of B&G Zeus3 9 Multi-function Display (chartplotter) touch screen with SailSteer software, B&G Triton display, B&G WS320 wireless wind instrument, B&G Ship-to-shore radio with AIS receiver and MMSI, plus Standard Horizon handheld radio with spare lithium battery The boat has an enclosed head with rebuilt hoses and a new holding tank in 2021. The Atomic 4 now has electronic ignition, an electronic fuel pump, a Moyer Marine water pump, and a new 22 Gallon fuel tank A few other nice features include StackPack for Main Sail, Headsail sock, Helm cover, multiple sets of sheets, Martec 12x6 folding prop and cradle Win races or cruise the Great Lakes, this Ranger will get you on the water without breaking bank Reason for selling is moving on to something else.

Narrow Results

Current search reset all.

• Keyword: great lakes sailboat
• Catalina (2)
• Nordic Tugs (2)
• C&C Yachts (1)
• Chris Craft (1)
• Chris-Craft (1)
• Custom Built (1)
• J Boats (1)
• Laguna Yachts (1)
• Macgregor (1)
• Newbridge Boats (1)
• Pearson (1)
• Ranger Yachts (1)
• Sparkman Stephens Design Chris Craft (1)
• Cruiser Boats (4)
• Sloop Sailboats (3)
• Cruiser (2)
• Cruiser Motorcycles (2)
• Daysailer Sailboats (2)
• Racer Boats (2)
• Sailboats (2)
• Trawler Boats (2)
• Motor Yachts (1)
• Michigan (16)
• New York (5)
• Florida (4)
• California (3)
• Pennsylvania (3)
• Indiana (2)
• Connecticut (1)
• Ontario (1)
• South Carolina (1)
• Wisconsin (1)
• POP Yachts (2)
• Search Title Only
• Has Picture
• Include Sold Listings

Showcase Ads

1988 Ocean Master 27’ Center Console

Portland, ME

1981 Morgan 382

2000 Island Hopper Certified Dive Boat USCG

Conch Key, FL

2016 Boston Whaler 230 Vantage

Daly City, CA

2017 Crownline 264 CR

San Antonio, TX

2011 Monterey M3

Chattanooga, TN

2015 Boston Whaler 240 Dauntless

New Orleans, LA

Create Alert

Please, name this search

Select Interval

Alert Successfully Created

CALL NOW  | 219-730-9414

PRECISION YACHT SALES

Where passion meets the water. experience the difference., we know boating. get to know us..

     At Precision Yacht Sales, we value connection, honesty, reliability, and commitment above all. Our clients’ needs and best interests are the heart of everything we do. Our team is built upon talented and skilled professionals within the boating community, but also are experienced boaters themselves. We believe this is a key component  of what sets us apart. We don’t just work within the community—we are a part of the community and we take great pride in that.

     We understand the “why” in our work, which helps us to operate at our highest level of performance and efficiency.  We put our passion and expertise into every transaction. We set a high bar and will always strive to exceed expectations because YOU, our client, deserves the best experience when it comes to buying or selling a boat. 

Professional Services

At our yacht brokerage, we pride ourselves on our personalized approach. Our team of highly knowledgable and experienced brokers will work with you every step of the way to ensure that your experience is smooth, stress-free, and tailored to your specific needs. Whether you're buying your first yacht or selling your tenth, we're here to help you navigate the complex world of yacht transactions. 

Finding and purchasing a boat that meets your wants and needs is an exciting, but sometimes stressful time. Our goal is to make this transaction as smooth as possible while exceeding all your expectations. With our expertise, once we learn what it is you are looking for, finding your dream boat is simply our mission. 

Selling your boat on your own requires a great deal of time and effort. Let our boating experts professionally market your boat and provide the assistance and resources you need. Our mission is to take the stress away from the selling process while providing you with the highest selling price for your boat. 

This page uses frames, but your browser doesn't support them.

Best Sailboats For Lakes

Last Updated by

Daniel Wade

December 28, 2023

Lake sailing is a popular recreational activity, and it's easy to get started. But which sailboats are best for freshwater lakes?

The best sailboats for lakes are the Optimist dinghy, the Sunfish racing sailboat, the Herreshoff 12 1/2, the West Wight Potter 15, the West Wight Potter 19, and the Cal 20 sloop.

In this article, we'll review six of the best small sailboats for cruising on lakes. Additionally, we'll go over the qualities to look for when choosing a lake sailboat, along with how to choose the right boat size for your sailing destination.

We sourced the information in this article from boat design and identification guides along with our experience sailing American lakes.

Table of contents

‍ What Makes a Sailboat Good for Lakes?

There are a few things that most lake sailboats have in common. For one, they're trailerable—and thus enable the owner to pull them out of the water and store them in a reasonably small space. They must be light enough to fit on a trailer and also have a centerboard or swing keel and collapsible mast.

Additionally, they must be light and nimble on the water and handle well. Lakes don't have consistent wind like oceans do, so lake sailboats must be able to utilize small amounts of wind but also contend with the occasional gust. In a way, lake sailboats have to be more carefully designed than larger ocean-going boats.

The largest lake sailboats have a small cabin with a berth and a place for a stove and possibly a sink. These small cabin cruisers are ideal for camping, and they're the best type of lake sailboat for large lakes and extended cruising.

Smaller recreational boats have open tops and are easy to sail. Their small size makes them relatively safe and also easy for beginners to handle. Many of them are filled with positive flotation foam, which makes them virtually unsinkable. These are the best kinds of open-top boats for lakes.

There's a difference between a practical lake sailboat and a fine lake sailboat. Classic sailboats are considered fine lake sailboats in the sense that they're valuable and fun for experienced sailors. These vessels are less suitable for beginners and recreational sailors, as they require skill to operate and maintain.

The best kind of lake sailboat for most people is a medium-sized lightweight fiberglass sailboat. These boats have been produced by various manufacturers in many configurations, and tens of thousands still exist on lakes and rivers around the country.

Do Lake Sailboats Have to Be Small?

Not necessarily—it all depends on the size of the lake and the intentions of the sailor. Full-size ocean-going sailboats can be found on some of the nation's bigger lakes, such as Lake Michigan and even Lake Cumberland.

But in most cases, the size of lake sailboats is limited to about 22 to 25 feet. A boat in this size range can sail anywhere that ski boats and pontoon boats can operate.

Best Sailboats for Small Lakes

Small lakes have the least flexibility when it comes to sailboat selection, and for obvious reasons. Thankfully, there are tons of great small sailboats that work well on small lakes. Plus, these sailboats can be carried by a couple of people and stored in a garage. Here are two of the best sailboats when navigational space is limited.

1. Optimist "Opti" Dinghy Sailboat

The Optimist is one of the most popular youth and instruction sailboats ever built. It's small, lightweight, and (almost) impossible to capsize under normal circumstances. The boat itself is basically a fiberglass (or wooden) box with a slanted bow and a centerboard.

The Optimist dinghy measures 7 feet 9 inches long and 3 feet 8 inches wide. It weighs just 77 pounds dry and has a 7-foot aluminum mast. It utilizes a spirit rig, which is a simple two-spar system that reduces the height of the mast.

The centerboard, mast, and tiller come off with little effort, and the vessel is essentially unsinkable. This makes it perfect for kids and teenagers who don't know how to sail or for smaller adults who just want a cheap little sailboat to cruise around the lake.

Optimist dinghies are remarkably easy to sail and offer a great platform for learning the basics of tacking, windward sailing, and sailboat recovery. They're available widely on the used market, as over 150,000 have been produced over the years. Plus, it's a popular racing boat, and hundreds of them show up for regattas around the world.

2. Sunfish Sailboat

The Sunfish is the ideal upgrade from an Optimist, and it's much more suitable for adults. Sunfish sailboats are designed for racing, and they're significantly larger than sailing dinghies. They require more skill to operate, but they're a ton of fun on the water and easy to master.

The Sunfish is designed for a crew of one or two adults, though it can be easily operated by just one. The hull is 13 feet 9 inches long and 4 feet 1 inch wide, and it weighs 120 pounds dry. In other words, two adults can easily lift this boat in and out of the water, and it's small enough to navigate small lakes.

The Sunfish has a lateen sail, which is an ancient design that's easy to rig and reduces mast height. For its size, the Sunfish has a very large sail area. This makes it efficient in light winds but also quite squirrelly in gusts. However, careful attention can prevent capsizing—and capsizing the Sunfish isn't actually a big deal. Simply stand on the centerboard, grab the boat and lean back to right the vessel.

Sunfish are common on the used market, as thousands have been produced since 1943. You can still buy a new one from Laser Performance for under $5,000, and used Sunfish are available for much less.

Best Sailboats for Medium-Sized and Large Lakes

People who want to sail on large lakes have a ton of flexibility in the kind of boat they use. Some people sail small sailboats, like the Sunfish or the Optimist, near shore in large lakes. However, large lakes can also accommodate much bigger boats with better accommodations, up to and including full-size cabins. Here are the best sailboats for large lakes.

1. Herreshoff 12 1/2

{{boat-info="/boats/herreshoff-12-12"}}

The Herreshoff 12 1/2 is a beautiful classic boat with incredible handling capabilities and excellent efficiency. The Herreshoff 12 1/2 is essentially a pocket ship, as the hull is designed in the same way that classic full-size ocean-going sailboats were.

The Herreshoff 12 1/2 features a full-length displacement keel and a spacious cockpit, as there's no centerboard trunk in the way. It's also remarkably stable and suitable for use in dodgy weather. This vessel is open-cockpit and doesn't include a cabin, though some people use a boom tent to go camping aboard.

Despite being similar in length to the Sunfish, this vessel is not even in the same class. It's a full gaff rig and includes a headsail and traditional rigging. More experience is required to operate one of these sailboats, as it's a scaled-down version of a full-size cruising boat.

However, once you learn to operate the pulleys, you'll find that sailing a Herreschoff 12 1/2 is a joy in almost all wind conditions. It's small enough to use on medium-sized lakes and to tow on a trailer, and it's stable enough for comfortable and safe sailing for the entire family. Four adults can sit aboard, and it can be piloted by just one.

If you're looking for a beautiful and classic lake sailboat with ocean-going seaworthiness, it's tough to go wrong with a Herreschoff 12 1/2. These vessels are available on the used market starting around $5,000 to $10,000, and most of them can be found in New England.

2. West Wight Potter 15

{{boat-info="/boats/west-wight-potter-15"}}

The West Wight Potter 15 is a fiberglass trailerable sailboat that was designed to be safe, fun, and easy to transport. These vessels are designed for stability, and they're unsinkable thanks to positive floatation foam. Additionally, the West Wight Potter 15 is one of the smallest sailboats you can buy with a cabin.

This 15-foot boat uses a Bermuda rig, similar to what you'll find on the vast majority of large recreational sailboats. The mast and standing rigging was designed to be extremely easy to deploy and stow, making it a great weekender for low-stress operation.

Additionally, the West Wight Potter 15 has a very shallow draft and a centerboard, making it suitable for beaching at the lake. West Wight Potter sailboats have very few unnecessary metal parts, and thus they're extremely light. Most standard full-size cars and trucks can tow this vessel without trouble.

The West Wight Potter 15 was produced until recently, and there are hundreds on the used market that you can purchase. Prices fluctuate widely, but a West Wight Potter 15 in usable condition can be found for $3,500 to $15,000.

3. West Wight Potter 19

{{boat-info="/boats/west-wight-potter-19"}}

If you're looking for a larger centerboard cruiser with better accommodations, then the West Wight Potter 19 is an excellent choice. This vessel follows the basic design principles of the West Wight Potter 15, but the cabin is much more spacious. Additionally, the rigging sets up and disassembles just as easily.

The West Wight Potter 19 is an extremely comfortable and safe boat, and it's a wonderful little pocket cruiser for extended lake trips. Additionally, the cabin is spacious enough for two adults to sleep comfortably, and there's room for a stove, a sink, and a portable head.

The West Wight Potter 19 is trailerable and lightweight. It has a centerboard, which allows the owner to reduce its draft from several feet down to just a few inches. A vessel like this can last for years in freshwater, and they're popular for saltwater cruising as well.

The West Wight Potter 19 is also quite affordable. Due to its popularity, you can find one in excellent condition for between $5,000 and $12,000 in many areas. These boats are also remarkably seaworthy, as one individual sailed his from San Francisco to Hawaii—over 2,000 nautical miles of open ocean. In other words, you'll be safe and comfortable on the lake.

{{boat-info="/boats/cal-20"}}

The Cal 20 is a classic sailboat that has been around for decades, and it's one of the most popular 'big' boats on America's freshwater lakes. It's a cruising sloop that measures about 20 feet in length and features a cabin with a unique flush deck.

The Cal 20 is much more typical of large coastal and ocean-going sailboats, and it's operated in exactly the same way. It has a tall Bermuda rig with traditional controls, so it's a great platform to practice sailing full-sized boats.

The Cal 20 features a small cabin with basic amenities, such as a sink, a place for a camp stove, a portable toilet, and a V-berth. Additionally, it's exceptionally water-tight for a boat of its kind, so it can be left in the berth year-round without serious problems.

Cal 20 sailboats are extremely robust. There's no flimsy material anywhere aboard, as they're designed for saltwater cruising and racing. They have a large sail plan which makes it easy to sail in light winds, and they're stable enough to make handling easy in the occasional gust.

The Cal 20 can be found in abundance on the used market, with prices as low as $2,000 for a functional and leak-free boat. The best places to look for Cal 20 sailboats are on the West Coast, but they can be found inland as well.

Related Articles

I've personally had thousands of questions about sailing and sailboats over the years. As I learn and experience sailing, and the community, I share the answers that work and make sense to me, here on Life of Sailing.

by this author

Best Sailboats

Most Recent

What Does "Sailing By The Lee" Mean?

October 3, 2023

The Best Sailing Schools And Programs: Reviews & Ratings

September 26, 2023

Important Legal Info

Lifeofsailing.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon. This site also participates in other affiliate programs and is compensated for referring traffic and business to these companies.

Similar Posts

Affordable Sailboats You Can Build at Home

September 13, 2023

Best Small Sailboats With Standing Headroom

Best Bluewater Sailboats Under $50K

Popular posts.

Best Liveaboard Catamaran Sailboats

Can a Novice Sail Around the World?

Elizabeth O'Malley

June 15, 2022

4 Best Electric Outboard Motors

How Long Did It Take The Vikings To Sail To England?

10 Best Sailboat Brands (And Why)

December 20, 2023

7 Best Places To Liveaboard A Sailboat

Get the best sailing content.

Top Rated Posts

Lifeofsailing.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon. This site also participates in other affiliate programs and is compensated for referring traffic and business to these companies. (866) 342-SAIL

© 2024 Life of Sailing Email: [email protected] Address: 11816 Inwood Rd #3024 Dallas, TX 75244 Disclaimer Privacy Policy

SCHWARTZ & CO.

Yacht sales.

WE ARE A BOUTIQUE INTERNATIONAL YACHT SALES ORGANIZATION LOCATED IN THE GREAT LAKES REGION

New construction.

Featured Central Listing

2006 American Tug 41

Featured co-brokerage listing.

2020 Summit 54 Motoryacht

Selected recent transactions.

The Great Patriotic War Memorial

Most Recent: Reviews ordered by most recent publish date in descending order.

Detailed Reviews: Reviews ordered by recency and descriptiveness of user-identified themes such as wait time, length of visit, general tips, and location information.

Also popular with travelers

The Great Patriotic War Memorial, Lyubertsy

• (0.63 mi) Elite Hotel
• (0.64 mi) Neon Hotel
• (8.40 mi) Park Inn by Radisson Izmailovo Moscow
• (0.80 mi) Inn Spa Zona 4 Komnaty
• (0.82 mi) Mechta
• (0.10 mi) SanPol
• (0.41 mi) Sushi Master
• (2.19 mi) AnderSon
• (0.68 mi) Jazz Cafe
• (0.55 mi) SushiFast

Turn Your Curiosity Into Discovery

Latest facts.

3 TopRated Sites To Boost Your TikTok and Instagram Following

5 Detailed Facts About Medical Cannabis

40 facts about elektrostal.

Written by Lanette Mayes

Modified & Updated: 02 Mar 2024

Reviewed by Jessica Corbett

Elektrostal is a vibrant city located in the Moscow Oblast region of Russia. With a rich history, stunning architecture, and a thriving community, Elektrostal is a city that has much to offer. Whether you are a history buff, nature enthusiast, or simply curious about different cultures, Elektrostal is sure to captivate you.

This article will provide you with 40 fascinating facts about Elektrostal, giving you a better understanding of why this city is worth exploring. From its origins as an industrial hub to its modern-day charm, we will delve into the various aspects that make Elektrostal a unique and must-visit destination.

So, join us as we uncover the hidden treasures of Elektrostal and discover what makes this city a true gem in the heart of Russia.

Key Takeaways:

• Elektrostal, known as the “Motor City of Russia,” is a vibrant and growing city with a rich industrial history, offering diverse cultural experiences and a strong commitment to environmental sustainability.
• With its convenient location near Moscow, Elektrostal provides a picturesque landscape, vibrant nightlife, and a range of recreational activities, making it an ideal destination for residents and visitors alike.

Known as the “Motor City of Russia.”

Elektrostal, a city located in the Moscow Oblast region of Russia, earned the nickname “Motor City” due to its significant involvement in the automotive industry.

Home to the Elektrostal Metallurgical Plant.

Elektrostal is renowned for its metallurgical plant, which has been producing high-quality steel and alloys since its establishment in 1916.

Boasts a rich industrial heritage.

Elektrostal has a long history of industrial development, contributing to the growth and progress of the region.

Founded in 1916.

The city of Elektrostal was founded in 1916 as a result of the construction of the Elektrostal Metallurgical Plant.

Located approximately 50 kilometers east of Moscow.

Elektrostal is situated in close proximity to the Russian capital, making it easily accessible for both residents and visitors.

Known for its vibrant cultural scene.

Elektrostal is home to several cultural institutions, including museums, theaters, and art galleries that showcase the city’s rich artistic heritage.

A popular destination for nature lovers.

Surrounded by picturesque landscapes and forests, Elektrostal offers ample opportunities for outdoor activities such as hiking, camping, and birdwatching.

Hosts the annual Elektrostal City Day celebrations.

Every year, Elektrostal organizes festive events and activities to celebrate its founding, bringing together residents and visitors in a spirit of unity and joy.

Has a population of approximately 160,000 people.

Elektrostal is home to a diverse and vibrant community of around 160,000 residents, contributing to its dynamic atmosphere.

Boasts excellent education facilities.

The city is known for its well-established educational institutions, providing quality education to students of all ages.

A center for scientific research and innovation.

Elektrostal serves as an important hub for scientific research, particularly in the fields of metallurgy, materials science, and engineering.

Surrounded by picturesque lakes.

The city is blessed with numerous beautiful lakes, offering scenic views and recreational opportunities for locals and visitors alike.

Well-connected transportation system.

Elektrostal benefits from an efficient transportation network, including highways, railways, and public transportation options, ensuring convenient travel within and beyond the city.

Famous for its traditional Russian cuisine.

Food enthusiasts can indulge in authentic Russian dishes at numerous restaurants and cafes scattered throughout Elektrostal.

Home to notable architectural landmarks.

Elektrostal boasts impressive architecture, including the Church of the Transfiguration of the Lord and the Elektrostal Palace of Culture.

Offers a wide range of recreational facilities.

Residents and visitors can enjoy various recreational activities, such as sports complexes, swimming pools, and fitness centers, enhancing the overall quality of life.

Provides a high standard of healthcare.

Elektrostal is equipped with modern medical facilities, ensuring residents have access to quality healthcare services.

Home to the Elektrostal History Museum.

The Elektrostal History Museum showcases the city’s fascinating past through exhibitions and displays.

A hub for sports enthusiasts.

Elektrostal is passionate about sports, with numerous stadiums, arenas, and sports clubs offering opportunities for athletes and spectators.

Celebrates diverse cultural festivals.

Throughout the year, Elektrostal hosts a variety of cultural festivals, celebrating different ethnicities, traditions, and art forms.

Electric power played a significant role in its early development.

Elektrostal owes its name and initial growth to the establishment of electric power stations and the utilization of electricity in the industrial sector.

Boasts a thriving economy.

The city’s strong industrial base, coupled with its strategic location near Moscow, has contributed to Elektrostal’s prosperous economic status.

Houses the Elektrostal Drama Theater.

The Elektrostal Drama Theater is a cultural centerpiece, attracting theater enthusiasts from far and wide.

Popular destination for winter sports.

Elektrostal’s proximity to ski resorts and winter sport facilities makes it a favorite destination for skiing, snowboarding, and other winter activities.

Promotes environmental sustainability.

Elektrostal prioritizes environmental protection and sustainability, implementing initiatives to reduce pollution and preserve natural resources.

Home to renowned educational institutions.

Elektrostal is known for its prestigious schools and universities, offering a wide range of academic programs to students.

Committed to cultural preservation.

The city values its cultural heritage and takes active steps to preserve and promote traditional customs, crafts, and arts.

Hosts an annual International Film Festival.

The Elektrostal International Film Festival attracts filmmakers and cinema enthusiasts from around the world, showcasing a diverse range of films.

Encourages entrepreneurship and innovation.

Elektrostal supports aspiring entrepreneurs and fosters a culture of innovation, providing opportunities for startups and business development.

Offers a range of housing options.

Elektrostal provides diverse housing options, including apartments, houses, and residential complexes, catering to different lifestyles and budgets.

Home to notable sports teams.

Elektrostal is proud of its sports legacy, with several successful sports teams competing at regional and national levels.

Boasts a vibrant nightlife scene.

Residents and visitors can enjoy a lively nightlife in Elektrostal, with numerous bars, clubs, and entertainment venues.

Promotes cultural exchange and international relations.

Elektrostal actively engages in international partnerships, cultural exchanges, and diplomatic collaborations to foster global connections.

Surrounded by beautiful nature reserves.

Nearby nature reserves, such as the Barybino Forest and Luchinskoye Lake, offer opportunities for nature enthusiasts to explore and appreciate the region’s biodiversity.

Commemorates historical events.

The city pays tribute to significant historical events through memorials, monuments, and exhibitions, ensuring the preservation of collective memory.

Promotes sports and youth development.

Elektrostal invests in sports infrastructure and programs to encourage youth participation, health, and physical fitness.

Hosts annual cultural and artistic festivals.

Throughout the year, Elektrostal celebrates its cultural diversity through festivals dedicated to music, dance, art, and theater.

Provides a picturesque landscape for photography enthusiasts.

The city’s scenic beauty, architectural landmarks, and natural surroundings make it a paradise for photographers.

Connects to Moscow via a direct train line.

The convenient train connection between Elektrostal and Moscow makes commuting between the two cities effortless.

A city with a bright future.

Elektrostal continues to grow and develop, aiming to become a model city in terms of infrastructure, sustainability, and quality of life for its residents.

In conclusion, Elektrostal is a fascinating city with a rich history and a vibrant present. From its origins as a center of steel production to its modern-day status as a hub for education and industry, Elektrostal has plenty to offer both residents and visitors. With its beautiful parks, cultural attractions, and proximity to Moscow, there is no shortage of things to see and do in this dynamic city. Whether you’re interested in exploring its historical landmarks, enjoying outdoor activities, or immersing yourself in the local culture, Elektrostal has something for everyone. So, next time you find yourself in the Moscow region, don’t miss the opportunity to discover the hidden gems of Elektrostal.

Q: What is the population of Elektrostal?

A: As of the latest data, the population of Elektrostal is approximately XXXX.

Q: How far is Elektrostal from Moscow?

A: Elektrostal is located approximately XX kilometers away from Moscow.

Q: Are there any famous landmarks in Elektrostal?

A: Yes, Elektrostal is home to several notable landmarks, including XXXX and XXXX.

Q: What industries are prominent in Elektrostal?

A: Elektrostal is known for its steel production industry and is also a center for engineering and manufacturing.

Q: Are there any universities or educational institutions in Elektrostal?

A: Yes, Elektrostal is home to XXXX University and several other educational institutions.

Q: What are some popular outdoor activities in Elektrostal?

A: Elektrostal offers several outdoor activities, such as hiking, cycling, and picnicking in its beautiful parks.

Q: Is Elektrostal well-connected in terms of transportation?

A: Yes, Elektrostal has good transportation links, including trains and buses, making it easily accessible from nearby cities.

Q: Are there any annual events or festivals in Elektrostal?

A: Yes, Elektrostal hosts various events and festivals throughout the year, including XXXX and XXXX.

Was this page helpful?

Our commitment to delivering trustworthy and engaging content is at the heart of what we do. Each fact on our site is contributed by real users like you, bringing a wealth of diverse insights and information. To ensure the highest standards of accuracy and reliability, our dedicated editors meticulously review each submission. This process guarantees that the facts we share are not only fascinating but also credible. Trust in our commitment to quality and authenticity as you explore and learn with us.

Share this Fact: