small aluminum catamaran

• News & Events

Handcrafted. Custom. Catamarans.

Island Hopper

NEW MODEL - The perfect family boat is here. Doesn’t matter if you like pulling up to sandbar parties, cruising around a lake, or nosing up on an island, the Island Hopper will provide everyone with a fun time on the water.

NEW MODEL - This shallow draft Bay Boat will get you everywhere you want to go. With an in-class leading amount of deck space, there is more than enough room to carry duck decoys, beach bags, and comfortably enjoy the water with your whole crew.

22SF Catamaran

A popular model throughout the Southeast, these smooth-riding catamarans are equally capable of taking the family for a joy ride or cutting through some chop in the ICW.

25SF Catamaran

Available with single or twin motors, the 25SF can make getting offshore a breeze. A spacious boat that is easy to maneuver and capable of going anywhere on the water.

29SF Catamaran

This catamaran can be customized for any boater. If you prefer a sunset cruise in the river, or you want to spend all day bringing in Wahoo, this cat can be customized for whatever you desire.

32SF Catamaran

Used by fishermen and fire departments in the Southeast, our 32’ catamaran gives you plenty of space for all your charter guests.

35SF Catamaran

Our largest boat gives you the size and range for any type of fishing, anywhere you want to go. Customize this with an upper station and a huge coffin box.

Aluminum Hulls

At twice the strength of fiberglass, our lifetime guaranteed aluminum hulls will provide you with a supremely maneuverable boat that can travel faster and with less draft, all while providing a safe boating experience.

Catamaran Design

Catamaran hulls provide a softer, more stable ride with exceptional efficiency all while providing optimal deck space due to wider beams. The lower center of gravity will give you a ride with the least impact.

2 Decades of Experience

A track record of over two decades of building custom aluminum boats ensures that you will be getting the boat you deserve. Boats built by artisans dedicated to delivering the perfect vessel for you.

Built by Artisans

The Cape Fear Cats team of artisans is invested in seeing your boat all the way through from design to delivery. Our in-house welders, fabricators, riggers, and painters are able to build your boat 100% on site.

We craft all of our 100% aluminum boats to your specific design. Our commercial strength hulls will provide you a top of the line boating and fishing experience.

F I R S T    I N    C A T A M A R A N S

• 1-360-457-5752

• RecPro | Recreational
• PaxCat | Passenger
• LabCat | Survey
• Landing Craft

move beyond ordinary with brix marine

LIMITED AVAILABILITY – BOOKING 2025 DELIVERIES NOW

join the legacy

FEATURED BOAT

3814-ctc offshore, latest brix videos, safety. stability. speed., efficient. spacious. safe., stable. strong. ergonomic., 4wd of the sea, first in catamarans, discover our boats.

RECREATIONAL

Walk-around or full width cabin

Join the BRIX legacy with a recreational cat built to professional standards. Be it for fishing or cruising, each custom RecPro is distinctly tailored for adventure.

TOUR, FERRY, DIVE

Customize For Diving, Whale Watching Or Luxury

BRIX Marine’s PaxCats deliver reliability and comfort for the most memorable excursions. Choose the sweetest ride on the water for up to 49 passengers and beyond.

SURVEY, RESEARCH

Workboat’s Top-10 Significant Boats Of 2019

BRIX provides the most capable boats under 50′ in the marine science industry. Outfit with equipment such as a knuckle boom crane, an A-frame, or the versatile BRIX HYPR-Arm.

ABOUT BRIX MARINE

has earned a solid reputation for pioneering and crafting the world’s most rugged aluminum catamarans and workboats since 1991.

The company was founded in Canada and moved to Port Angeles, WA in 2001. We gained new ownership under Bryton Marine Group in 2017, which fortified the company’s focus on our Core Values and strategic plan for our future.

“Our team has developed strong momentum with our boat portfolios and customers. As we look to the future, BRIX Marine will honor the legacy we have built and move beyond to deliver exceptional custom boats,” said Perry Knudson, Managing Director.

BRIX literally means the scientific measure of sweetness in liquid. This translates well to the high-performance boats the company is known for. “BRIX is more than a sweet riding hull,” said Knudson. “Our custom projects begin with the first communication and the relationship continues after the boat is delivered. BRIX is committed to an owner-centric approach.”

BRIX Marine has another important target. “We want to be the best place to work in our community,” said Knudson. BRIX employs master level craftsmen in the disciplines required to build welded aluminum boats. The company invests in defining career paths and training employees to gain the skills needed to advance in their fields.

The BRIX team will broaden and diversify its portfolio of welded aluminum boats, known as being “first in cats.” The newly redefined custom recreational portfolio is in high demand, and BRIX Marine is bringing this same innovative approach to other key markets.

“Our luxury water taxi designs are raising the standards for passenger vessels as seen with the recent launch for Liberty National Golf Club. The research vessel  Bob & Betty Beyster  we delivered in 2019 earned a Workboat Magazine award as a Significant Boat of the Year. That design is reshaping our research vessel line-up,” commented Perry Knudson. “We have a lot of exciting things on the horizon. This new identity represents who we are and where we’re going.”

Your Vision. Our Expertise.

We believe solutions exist to unique vessel demands, and we provide solutions to our clients every day, giving them the best possible opportunity to succeed on the water.

Let’s build your boat.

Our Core Values

• Quality Craftsmanship
• Financial Responsibility
• Accountability

SOME OF OUR VALUED CLIENTS

The best heavy gauge aluminum catamaran in it’s class!

• LENGTH OVERALL : 30′ Without Motors / Bow Pulpit
• HULL ENTRY : 50°
• TRANSOM DEADRISE : 16°
• BEAM : 11′
• BOTTOM : 107″
• TRANSOM : .250
• SIDES : 59″
• FUEL CAPACITY : 240 gallons
• DRY WEIGHT : 8920 lbs. Without Motors
• MAX HORSEPOWER : 600 hp.

• Reverse pilothouse Windshield Design
• Offshore Motor Bracket With Full Length Swim Step Platform and Welded Aluminum drain plugs
• Stainless Steel Fasteners Throughout
• Welded Bow Eye and Transform Eyes
• Welded Rope Cleats
• Over-built one piece, 3/8 thicker keel bar for superior keel strength, weld protection and boat life
• Limited lifetime hull warranty to the original purchaser
• High duality marine paint interior with clear coat, one color matching exterior marine paint with clear coat.
• Fully Welded Alaskan Bulkhead (optional)
• Sliding Cabin door
• Optional side entry sliding door
• Reversed Chines
• Welded self bailing deck
• Instrument panel with easy wiring access
• spare switches wired into the circuit breaker
• Aft battery tray with 3-way battery switch
• Navigation /Anchor lights
• High capacity bilge pump W/ float switch
• 12V Electrical outlet on dash
• Reversed windshield for superior visibility and increase room
• 360 degree walk around cabin design
• Large, oversized transform fish box (optional)
• (2) Large in deck fish boxes
• Walk through transform door
• Non extruded build, plate-plate Welded construction
• Full length side trays
• Cuddy area for marine head and storage

Built for a lifetime

Aluminum boats built with every detail engineered, designed, and executed with dedication. ACI Boats builds welded aluminum catamarans and monohulls for recreational and commercial use. Our boats are built to last a lifetime.  

We are founded on generations of boat building experience. ACI Boats is owned and operated by Cory Armstrong, and backed by a team of skilled craftsmen and women. When choosing a boat builder, quality and trust is everything– ACI boats delivers with a safe, and comfortable vessel that you can rely on.

Pybus Point Lodge is proud to announce the official launching of two brand new, catamaran style, fishing and touring boats from ACI Boats. This is the second time we’ve had the pleasure of working with ACI and once again, they exceeded our expectations. Since we run a premium fishing and adventure lodge, we don’t just have to worry about our boats being safe and functional–we also have to make sure that our boats have the style and comfort that our guests expect.

ACI Boats is thrilled to announce the official award of a $3 million dollar contract with American Samoa’s Departmant of Commerce for four “Super Alia” commercial fishing vessels. All four boats will be manufactured at ACI Boats’ facility in Port Townsend, WA. The vessels themselves will be 38’x14’ semi-displacement catamarans, designed by ACI Boats and Coastwise Marine Design. The first of the four vessels, to be completed in Fall/Winter 2022, will be used as a training platform for boat owners, captains, and deckhands. The following three boats, will be completed over the course of 18 months and will then be available for lease by the American Samoa Dept. of Commerce, intended to support the growth and safety of the local fishing fleet.

ACI Boats launches it’s first CatLander in it’s line of CatLander landing crafts. Built for the Jamestown Sklallam tribe in Washington State, the CatLander7500 will be used as a spill response support vessel by the tribe.

• Yachting World
• Digital Edition

Garcia Explocat 52 review: A go-anywhere aluminium catamaran

• February 23, 2021

The new go-anywhere Garcia Explocat 52 offers an enticing combination of space, pace and rugged construction. Rupert Holmes tested the new boat for Yachting World and felt it's clear she has the potential to make easy 250 mile days in the right conditions.

Product Overview

Manufacturer:, price as reviewed:.

In recent years there have been two clear trends in serious long-term cruising yachts. Firstly catamarans have become mainstream, to the extent that professional racing sailors talk of ‘buying a catamaran’ for cruising with their families – a monohull doesn’t even enter the equation.

This trend can also be seen in ARC (Atlantic Rally for Cruisers) entries, where multihulls are increasingly common. In 2020 they accounted for 28% of the total fleet and a much higher proportion of new boats and more recent designs.

The second trend is the rapidly growing popularity of rugged metal expedition yachts. Aluminium is favoured for this as it offers good strength and stiffness without a weight penalty, especially for yachts over a critical size. That’s why many top-end racing yachts were built of aluminium before composites dominated that scene.

This is a boat that’s capable of effortlessly eating miles on a long passage. Photo: Jérôme Houyvet/Garcia Yachts

It was, therefore, surely only a matter of time before someone married these two concepts to create an aluminium expedition catamaran. Cherbourg-based Garcia Yachts has been building metal boats for almost 50 years, including Jean Luc Van Den Heede ’s 36.15 MET, in which he scored a podium finish in the inaugural Vendée Globe Race in 1989.

Equally Garcia needs no introduction as a front-runner in the development of expedition yachts, thanks to the success of the Exploration 45 that was developed with ARC founder Jimmy Cornell eight years ago. What’s less well known is that the Explocat 52 is by no means Garcia’s first aluminium catamaran.

A pair of 43-footers 15 years ago were followed by the SC48, one of which consistently posted some of the fastest passage times in the 2017/18 World ARC .

As part of the Grand Large Yachting group Garcia was also able to draw on considerable expertise from Outremer and Gunboat for its latest model, while naval architecture is by Pierre Delion, who also drew the SC48.

The Explocat 52 is therefore the product of a highly knowledgeable development team and has already attracted plenty of attention, including nomination for the 2021 European Yacht of the Year awards.

The core concept for the Explocat 52 is a robust, safe long-range yacht that offers good passagemaking speeds. A high level of comfort, both at sea – even in inclement weather – and in harbour was also a key requirement, and the boat had to be capable of being handled by a couple.

Go anywhere?

While a key marketing message for Garcia’s monohulls is ‘Nowhere you can’t go’, the company accepts this won’t apply as literally to the Explocat 52, even though the boat’s impressive speed potential will enable routing around a lot of bad weather.

Explocat 52, the ultimate aluminium exploration catamaran by Garcia Yachts

The problem is, unlike being knocked down in a monohull, capsizing a multihull is always catastrophic. There are parts of the world, especially at high latitudes in the southern hemisphere, or out of season in the north, where it could be impossible to route around potentially dangerous weather. Nevertheless, the boat is intended to stretch the boundaries that are sensible for exploring the globe with a catamaran, allowing owners to sail a lot further north and south than might be prudent with existing designs.

Rugged construction is also a benefit when venturing off the beaten track in tropical waters. If anything goes wrong while exploring a poorly-charted lagoon, for instance, a fibreglass boat may be in grave danger. Many foam sandwich hulls have surprisingly thin outer skins, which can make the structure vulnerable to abrasion, whether from coral or a concrete quay.

By contrast, the thinnest plating of the Explocat 52 is 5mm, which increases through 8, 10 and 12mm thicknesses, before reaching an enormously reassuring 14mm at the bottom of the hulls. The boat has framing of up to 14mm and is structurally engineered to eliminate flexing between the hulls.

A substantial keel with a long chord length is welded to the bottom of the hulls. They are marginally deeper than the rudders, which offers some protection, as well as providing a firm base on which to dry out on a beach. At the same time the key elements that have made Garcia’s Exploration monohulls so successful are incorporated.

These include fore and aft watertight bulkheads and upstands for through-hull fittings that enable all seacocks to be above the waterline. A skeg ahead of the saildrives and rudders provides good protection, while the rudders are large enough to offer redundancy in the event of one being lost. In addition, the top aft corner of the rudders have a sacrificial zone designed to eliminate risk of the blade puncturing the hull, or becoming jammed, if it hits an obstruction with enough force to bend the stock.

What about weight? Are metal multihulls uncommon because they’re simply too heavy? As with aluminium monohulls, where the material offers better strength/weight ratios for larger boats, around 14m/46ft overall length seems to be a transition point for catamarans.

Below that composite boats will always be lighter, but above that length aluminium is lighter for equivalent rigidity than a composite structure that doesn’t use exotic materials. At 18.9 tonnes lightship displacement the Explocat is therefore in the same league as other cruising catamarans of a similar size and indeed lighter than some.

Substantial built-in attachment points for shorelines are found at the waterline of each bow for use in extreme conditions, plus attachment points aft for a drogue

Interestingly, it’s also a similar figure to that of the Exploration 52 monohull, yet the Explocat offers a large amount of extra space and 35% more sail area. Maximum payload is a useful five tonnes. But how does that translate on the water?

Rapid exploration

Our test took place from Cherbourg on a gloriously sunny late November day, with a gusty and shifty southerly breeze varying from 7-19 knots.

It’s immediately clear the Explocat 52 picks up and sails at speeds that belie its displacement, putting it in a different league to other expedition yachts of similar length, especially when reaching.

Broad reaching at 120° TWA with full main and Code 0 in 16 knots of true wind we cruised comfortably at 10 knots, reaching an unfussed maximum of 11.8 knots, with the boat still feeling rock steady.

When the breeze picked up to 19 knots, at the design limit for the Code 0, we furled it and continued with the Solent jib instead, losing only a couple of knots of boat speed. By the time we turned upwind the wind had eased significantly, which gave a good test in conditions that can challenge cruising yachts.

Article continues below…

Boreal 52 boat test – The sailor’s off-roader

If ‘off-road’ or ‘off-piste’ were categories in sailing, the Boréal 52 would be among the top contenders. From the brushed…

Garcia Exploration 52 test: The sailing equivalent of a 4×4 off-roader

If you were to take your partner or family to some of the world’s most remote waters, exploring the oceans…

In just seven knots of true wind we made 5.3 close-hauled, rising to 6.2 in 9 knots of breeze. Maximum upwind speed was 9 knots in 15 knots of true wind. However, these numbers can’t be achieved if pinching – the boat likes to be sailed fast and free, with tacking angles of at least 105°. This is hardly a surprise for a boat of this style that’s sufficiently fast to have a big impact on apparent wind angles.

Even in light airs the Explocat is surprisingly nimble in tacks, showing no hint it might miss stays, or slow enough for steering to be difficult until speed is regained on the new tack. Obviously the steering has less feel than a lightweight monohull, but there’s enough feedback for it to feel reasonably responsive and enjoyable to helm.

The shifty and gusty offshore winds were ideal for figuring out the boat’s capability across a range of wind strengths, but the mostly flat water meant we didn’t see the boat performing in a more agitated sea state.

Pete Goss – another massively experienced high-profile Garcia owner – has sailed the boat in more lively conditions. Even fully powered up he reported the lee shrouds remaining tight and there was no telltale creaking of furniture below decks, indicating no deflection of the structure despite the high loads. “It’s incredible how fast she is,” Goss says. He was also impressed by how nimbly the boat tacks.

Cockpits and steering

Much thought has gone into optimising the deck layout. The core vision is for key operations to take place in the safety and shelter of the aft cockpit. The only exceptions are preparing the main for use and hoisting/dropping spinnakers and reaching sails.

We conducted our test in south-east to south-west winds of 7-19 knots, in flat water

As standard the helm station is offset to starboard at the front of the aft cockpit. It has a two-position swinging wheel, which provides an all-round view over the top of the coachroof in its upper position. When swung inboard and lower, the helmsman gains shelter from the hard top, while being able to see forward through the bridgedeck cabin windows.

However, at the request of the owner the first boat has twin outboard helm stations. Before sailing it I’d expected to prefer this arrangement, but didn’t warm to it. Granted, you can steer from the windward side, with a good view of the jib, but the headsail luff will also be visible from the higher of the standard steering positions.

The key problem with the twin wheels is the coachroof creates a large blind spot on the other side of the boat. This has potential to create issues when manoeuvring in confined quarters such as a marina or when bailing out of an anchorage in an unexpected squall.

Mainsheet and traveller are handled right aft on the crossbeam, while the headsail, staysail and kite sheets, plus furling lines, are handled by electric Lewmar 65 winches on each side of the cockpit. Plenty of large rope bins and bags help keep lines nicely ordered.

The rig has twin headstays, with a marginally overlapping furling Solent jib on the main forestay, plus a self-tacking furling staysail. This runs on a neat Dyneema strop, instead of a more conventional but unnecessarily expensive and heavy track.

Combined with furling spinnakers and reaching sails it’s an excellent configuration that takes the hassle out of changing gear to suit widely different conditions.

The square-top mainsail has a Dyneema strop that pulls the ‘gaff’ forward to the mast track without any need for complex hooks, making it as easy to use as pin-head sails. A fuse attaching one of the mainsheet blocks to the boom is intended as a capsize prevention device if the boat is over pressed.

When the fuse blows the strop joining the block to the boom extends by two metres, immediately depowering the sail. The idea of the forward cockpit is to provide a protected position for a lookout when sailing in ice and for anchor handling. It also doubles as a well ventilated area for relaxation when at anchor in warmer climes.

It’s generally easy to move around on deck and there are decent steps at a gentle gradient between the various different levels. I also liked the cork deck – it looks surprisingly good, has great grip and is a more environmentally friendly option than teak.

There’s plenty of stowage, both in small lockers in the cockpit benches and in cavernous sail lockers at the front of each hull.

Davits are rated to take a 500kg RIB, allowing a substantial, powerful tender to be carried.

Temperature control

Alongside the rugged exterior is supremely comfortable and well thought out accommodation.

This, of course, isn’t a boat where it would be appropriate for the distinction between interior and exterior living spaces to be all but eliminated, as it is for many recent designs intended solely for hot climates. Nevertheless, the standard specification has a drop-down window each side of the door between the saloon and aft cockpit. This will help to open the saloon to the aft cockpit and improve ventilation in warm weather.

The saloon is comfortable, bright and airy, yet also has practical sea-going elements

For colder parts of the world an air extraction system vents moist and stale interior air without needing to open hatches.

The main forward saloon windows are also equipped with demisters. In the same vein, dedicated lockers for foul weather gear and boots have mechanical ventilation and heating. These features make sailing in cold and damp regions far more civilised, yet are addressed by disappointingly few manufacturers.

The aluminium shell is lined with up to 76mm of high density foam, which provides excellent thermal and acoustic insulation. As a result the boat is impressively quiet inside when under way – in the saloon you can barely hear the engines, even at cruising speed, and the high bridgedeck – it’s 85cm above the water – means we experienced no slapping of waves.

Insulation of this standard is expensive to install and doesn’t show up on photographs. Yet yachts create a cacophony of noise in heavy weather. Effective sound proofing is therefore a critical element in creating a comfortable environment, while the thermal insulation will be a benefit whether in the tropics or the Arctic.

As you’d expect, the saloon is very bright and airy, with a good almost all-round view.

The navstation forward on the port side, next to the watertight door to the forward cockpit

The biggest drawback in this respect is at the navstation, forward on the port side, as the mast support and starboard forward mullion obscure some of the view.

Also to port is a big galley that offers plenty of secure worktop space, with low fiddles, and masses of stowage. The test boat had additional fridge and freezer space in the starboard hull. Garcia says more than half its customers choose electric cooking and this boat has a microwave, electric oven and induction hob.

The company has its roots in custom boatbuilding and offers several choices for fitting out the hulls, with options for 6-10 berth arrangements, including a classic owner’s layout. The aft cabins have natural light through two hull windows, a wide aft window to the cockpit, plus opening ports aft and overhead.

If you enjoyed this….

Yachting World is the world’s leading magazine for bluewater cruisers and offshore sailors. Every month we have inspirational adventures and practical features to help you realise your sailing dreams. Build your knowledge with a subscription delivered to your door. See our latest offers and save at least 30% off the cover price.

Garcia’s longstanding knowledge of creating rugged go-anywhere yachts has enabled the yard to produce one with a very enticing combination of space, pace and rugged construction. It also benefits from a high standard of finish, attention to detail and many neat touches. It’s clear the boat has the potential to make easy 250 mile days in the right conditions. At the same time it has sufficient tankage and stowage for supplies, spares and tools to give a high level of autonomy for extended periods. The owner of the first boat intends voyaging to Svalbard and, with another seven boats on order, it’s unlikely to be long before we see Explocats in many more far-flung and interesting parts of the globe.

• Design Advantage
• Jobs & Careers

THE ALL AMERICAN DIFFERENCE

Whether it’s a high speed catamaran passenger ferry, a monohull cruise boat, or a government research vessel, we know each of our operator’s needs are unique..

This is why we do not conform their objectives to fit existing designs. We work on every detail of the mission of each vessel prior to production, to ensure the most operator-friendly, fuel-efficient, and best performing vessel in its class. All American Marine is at the forefront of aluminum vessel design and manufacturing. Our team is committed to guiding you through each step of the process, and we deliver great value on a vessel that is truly unique to its specific application.

Government Contracts:

Duns #: 86-731-6010 cage#: 3fpe7.

Innovation is at our core whether it’s building North America’s first hydrogen fuel cell-powered commercial vessel or fuel-efficient & long-range survey vessels.  Our experience building the most technologically advanced vessels in the business serves our operators first and foremost.

There’s no “one-size-fits-all” solution on the water, and that’s why each of our vessels is truly unique to our operator’s mission. Our holistic design/build approach serves our operators in the short and long term in a vessels overall value.

Recognized for our craftsmanship and high quality, our  history of repeat customers knows that once a vessel is delivered, we stand by that vessel for years to come. You call? We answer. We stand by the quality of our vessel’s long-term performance and quality.

(360) 647-7602

Work and patrol.

Whether it’s for the LA Port Police or the Texas Game Wardens, AAM has built the toughest and most innovative vessels required for their class.

Research and Survey

From university research & survey to offshore wind support vessels, see how AAM is building the most advanced boats for all of our operators’ needs.

Pilot Boats

This unique catamaran design incorporates Teknicraft’s hydrofoil supported hull with industry leading maneuverability.

Hybrid Vessels

It’s happening on our roads and we know we won’t be able to rely on fossil fuels forever, that’s why AAM is on the leading edge of the decarbonization trend.

Passenger Ferries

From high-speed catamarans with hydrofoil technology to hybrid electric monohulls, we’re building the future of transportation.

Dinner Cruise Vessels

AAM is excited about this growing sector, and we look forward to customizing more vessels for this unique application.

STATE-OF-THE-ART Facility

Approximately 85 miles North of Seattle, All American Marine’s production facility is located along the Northern shore side of Bellingham Bay in Bellingham, Washington. In early 2017, AAM moved into the brand new, purpose-built 57,000 square foot boat construction facility located on Squalicum Harbor, allowing for multiple vessels of varying sizes to be in construction simultaneously with staggered production schedules.

TESTIMONIALS

“All American builds the highest quality vessels and offers the best value overall value in the country. When we visited their state-of-the-art facility and saw the rapid progress and the quality of work on our first boat, we decided to go ahead and build two vessels.”

“We chose All American Marine based on their experience and skillset in building such highly customized research vessels, vessels that are in service throughout North America. This new best-in-class vessel will provide an unmatched platform for our continued focus on performing to the most stringent offshore survey specifications in the world, whether that is for nautical charting or for subsea exploration to support offshore wind development.”

We are very pleased with the team All American Marine has put together to deliver this unique vessel and are eager for our guests to experience San Francisco Bay from the silent decks of the Enhydra [this fall]. We see the propulsion configuration on the Enhydra as phase one in our move toward the full electrification of our fleet. Stay tuned for phase two.

Working with the All American Marine team from start to finish went beyond expectations, and their commitment to detail and excellent project management throughout the process was the difference maker.

A successful partnership is one that accomplished the goals of all parties and concludes with superior results. King country citizens will be the beneficiaries of these quality vessels for years to come. Thank you to AAK, Teknicraft and King County.

“All American Marine worked with us to refine our goals, build a second, proven vessel that met those goals, and then delivered. In fact, despite building two boats during the midst of a global pandemic, they delivered both boats on time and on budget. This new vessel, with its capacity, comfort, and speed is revolutionizing the fleet for Major Marine Tours. Our customers truly enjoy the spacious and accessible deck spaces when viewing whales and glaciers, particularly the stadium bow viewing area.”

The vessel is definitely a game-changer for the Texas Game Wardens. Our key mission is to make sure the Texas maritime border is safe. The fact of the matter is, there’s not an off the shelf vessel available that meets the daily needs of law enforcement, particularly for long-range vessels. Each step of the way All American listened to us, understood our mission, and in conjunction with Teknicraft, designed and built a vessel that has all the versatility we need to be successful on the water.

KEEP IN TOUCH

To stay in the know about what AAM is up to, whether it’s current builds and new projects, upcoming launches, or industry news, don’t forget to follow our blog , check us out on Facebook and Instagram (@allamericanmarineinc), or shoot us a note and say hello!

All American Marine Launches Another Research Vessel for NOAA

All American Marine (AAM), together with NOAA, are proud to announce the launch of RV GANNET for NOAA Gray’s Reef National Marine Sanctuary (GRNMS). GRNMS is located 19 miles off Sapelo Island, Georgia, and is one of 15 marine sanctuaries and monuments that make up the U.S. National Marine Sanctuary System. This research vessel was constructed inside AAM’s state-of-the-art facility on Bellingham Bay. The vessel is a 52’ x 19’ semi-displacement aluminum catamaran hull that was developed by Nic de Waal of Teknicraft Design in Auckland, New Zealand. The vessel is based on the proven design elements found in the recently commissioned More

All American Marine has Delivered an Innovative Research Vessel for the University of Hawai’i at Mānoa

All American Marine (AAM) together with the University of Hawai’i at Mānoa are proud to announce the delivery of an innovative research vessel, on behalf of the Hawai’i Institute of Marine Biology (HIMB). This state-of-the-art research vessel, IMUA, is a 68.5’ x 25’ semi-displacement aluminum catamaran hull that was developed by Nic de Waal of Teknicraft Design in Auckland, New Zealand. The vessel contains proven design elements found in the recently commissioned and successful research vessels “Blue Manta” and “Shearwater” built for BlueTide Puerto Rico and Duke University, respectively. The vessel was constructed to US Coast Guard (USCG) standards and will operate More

AAM Delivers Unique Ocean Tour and Dive Vessel for Hawaii Dolphin Tours

All American Marine (AAM) is proud to have delivered a unique, highly customized vessel for Hawaii Dolphin Tours based in Honolulu, Hawaii. This vessel is a 50’ x 17’ semi-displacement aluminum catamaran hull developed by Nic de Waal of Teknicraft Design in Auckland, New Zealand. The vessel was constructed in AAM’s state-of-the-art facility on Bellingham Bay and is starting operations this week in Oahu. This new vessel will add capacity to Hawaii Dolphin’s range of snorkel and tour vessel trips. The 70-passenger vessel “Poseidon” was constructed to USCG (US Coast Guard) Subchapter T regulations and is fuel efficient at cruising speeds as More

ELEVATE YOUR EXPERIENCE

BEST OF BOTH WORLDS, HYBRID SOLUTIONS, FUEL SAVINGS

This equilibrium maintains speed when needed, ensuring secure passages, optimal operational economy, unwavering reliability, and zero-fuel serenity at anchor. 

The ocean connection bestows tranquility, adventure, and sustenance, fostering personal well-being and a vibrant lifestyle.

CUSTOM CATAMARAN ALUMINIUM YACHTS

Discover the ultimate in custom catamaran aluminium yachts with Cosmopolitan Yachts. Our passion for excellence shines through in every detail, from the cutting-edge hybrid diesel/electric propulsion system to the meticulous construction using top-grade materials and state-of-the-art technologies.

At Cosmopolitan Yachts, we take pride in delivering superior build quality and attention to every detail, ensuring unmatched durability, performance, and luxury. Our custom catamaran aluminium yachts are designed to excel in any environment, with marine-grade aluminium construction that provides strength, sturdiness, and resistance to corrosion for sailing in any water conditions.

Whether you’re looking for a silent electric boat or speeds of over 26 knots, our custom catamaran aluminium yachts offer ultimate flexibility in power and fuel efficiency. And with advanced hull forms and superior bow height, you’ll enjoy comfortable sailing even in seas exceeding 1.75m.

Embark on a journey of a lifetime with a custom catamaran aluminium yacht from Cosmopolitan Yachts. Let us help you bring your dream yacht to life with our superior build quality, attention to detail, and passion for excellence. Contact us today to start creating the perfect yacht for your needs and make unforgettable memories on the water.

HYBRID-ELECTRIC, HYDROGEN AND FUTURE BIOFUEL AND BIOGASES

At Cosmopolitan Yachts, we’re committed to creating custom catamaran yachts with the latest in propulsion technology. Our hybrid diesel/electric propulsion system offers ultimate flexibility in power and fuel efficiency,but we don’t stop there. We’re also exploring the use of hydrogen and biofuels as a more sustainable alternative for yacht propulsion and all our yachts are classified as “Hydrogen-Ready”. Hydrogen yachts or the use of biofuels and biogas could be the future of yachting, offering an even cleaner and more sustainable, self-sufficient energy source for powering your yacht.

Our dedication to sustainability and innovation means that we’re always looking for ways to reduce our impact on the environment while still delivering unparalleled performance and luxury. With the combined integration of the most advanced electric and hybrid technologies and, with the use of the next generation of fuels such as hydrogen, solar, biogas or biofuels,we can offer the perfect propulsion system to meet todays.

DISCOVER OUR YACHTS

New journeys await.

Discover the ultimate in durability and performance with our catamaran yacht range, designed to excel in any environment. with a robust aluminium construction and hydrid diesel/electrical propulsion system to make the most of the best technological advancements without any compromises.

THE WAY FORWARD

Equipped with either a conventional diesel or a hybrid diesel/electric propulsion system installed in both hulls, each with dual power inputs. This grants Cosmopolitan Yachts the ability to operate silently and emission-free as an electric boat at lower speeds, while still achieving speeds of over 26 knots. Complete redundancy and future proof.

A MAJOR IMPROVEMENT

To create the ultimate catamaran yacht, we have meticulously crafted every aspect with a keen eye for detail, to provide unparalleled performance and luxury. Our yachts are constructed using top-grade materials and state-of-the-art technologies, ensuring durability, comfort, and efficiency.

SUPERIORLY BUILT

The use of high-quality marine aluminium in our yachts not only provides strength and sturdiness but also ensures resistance to corrosion, making it perfect for sailing in various water conditions.

EXCEPTIONALLY DESIGNED WHIT A MAJOR IMPROVEMENT

We believe that every yacht should be a masterpiece, crafted with passion and dedication. Our commitment to quality and attention to detail is reflected in every yacht we build.

UNMATCHED COMFORT

The most spacious interiors, complete with luxurious to create an unforgettable sailing experience. The modern exterior design pays meticulous attention to every detail, including the placement of windows and other features that provide maximum comfort and offer breathtaking views of the surrounding water.

The yacht’s advanced hull form and superior bow height work in tandem to ensure comfortable sailing, even in seas exceeding 1.75m.

• MILITARY PEDIGREE
• NEWS & MEDIA

THE ULTIMATE EXPRESSION OF PERSONAL INDEPENDENCE

Introducing Metal Shark Yachts. These highly advanced, industrial-grade oceangoing vessels defy convention while enabling a new level of worry-free exploration and adventure. Our all-aluminum, American-made catamarans offer global range and deliver self-sustaining independence for months on end, putting the world within reach. We invite you to explore the many benefits of these unique expedition vessels.

Our efficient catamaran hull designs deliver nearly twice the efficiency of a comparable monohull yacht, allowing you to cruise at 10 knots comfortably, cross oceans at 17 knots, and exceed 23 knots at sprint speed, all at efficient fuel burns with epic ranges.

Our knifelike catamaran hulls and wide stance reduce vertical ship motion and latitudinal rolling while underway, while a high tunnel and nacelle eliminate wave slamming. Integrated active ride control mitigates both roll and pitch. Use a stemmed wine glass at sea!

Stay at anchor for days, weeks, or months at a time, in comfort and safety, with an unmatched level of autonomy. Our enhanced stability, coupled with massive ground tackle and solar power, combine to create a solid, stable, self-sustaining island of independence.

A Metal Shark Yacht's wide catamaran footprint results in far more usable deck space, opening up myriad possibilities for entertainment areas as well as ample storage space for tenders, toys, and cargo. With a Metal Shark Yacht, you can take it all with you.

A key benefit of our catamaran hull design is a significant reduction in draft compared to conventional monohull vessels. Anchor in 8' of water, safely traverse the small cuts between islands, or let the boat dry out on the hard, without worry. Nothing hurts it.

Unlike traditional yachts with their dark interiors and limited views, a Metal Shark Yacht's elevated, open spaces and floor-to-ceiling windows give the feel of a luxury penthouse while allowing an immersive connection with the surrounding environment. See where you're going. Enjoy the view!

MODEL RANGE

M30 • 30 meters / 100', m48 • 48 meters / 158', m70 • 70 meters / 231'.

Professional BoatBuilder Magazine

An aluminum expedition catamaran.

By Dieter Loibner , Apr 5, 2022

With 110′ LOA, a 35′ beam, and 45′ (33.5m, 10.6m, and 13.7m) of bridge clearance, the H-2 catamaran seeks to make a case for U.S. custom boatbuilding.

Hauling toys beyond the horizon is the raison d’être for a rugged go-anywhere catamaran designed and built in the U.S., a notable exception in the world of big yacht projects.

Gunboat might have left town, but there’s another big catamaran under construction in its old facility in Wanchese, North Carolina. It’s called H-2 , short for Hippocampus 2 , a stout 110-footer (33.5m) that liberally and intentionally quotes from the expedition/workboat vernacular. It’s built from aluminum and was conceived to go to the back of the beyond, where adventure beckons and Vessel Assist doesn’t operate. Aside from commodious and cushy accommodations, the boat offers grid autonomy, ocean-crossing range, and cargo capacity to match the mission of hauling a 26 ‘ (7.92m) tender, a 17 ‘ (5.8m) skiff, a two-person submarine, a four-seat ATV on the main deck, and a small helicopter on the flight deck aft.

The boat was commissioned by Brian Schmitt, 67, a real  estate executive in the Florida Keys, who pilots his own plane to commute to the Bahamas, where he keeps Hippocampus , his current 57 ‘ (17.37m) cold-molded wood/epoxy catamaran. I asked him about the jump from 57 ‘ to 110 ‘ . “I never thought I’d have the ability to do that in my own boat until probably the last few years,” he replied, adding that “it would be 120 ‘ [36.58m] if I had to do it today.”

Its predecessor, Hippocampus, built in wood/epoxy, was launched in 2003. At 57′ (17.37m), it is about half as long as H-2, but with 22,500 miles under its keels, it was a useful starting point for designing the new vessel.

Wearing shorts and a shirt with the new boat’s name and logo to our meeting, Schmitt talked openly about his project, which he manages as attentively as his real estate brokerage with 130 agents. Communication is his thing, responding to e-mail questions in near real time (in ALL CAPS) and talking to contractors directly. No project manager.

A passionate diver who habitually explores remote and exotic locales, Schmitt said he was happy with the first Hippocampus , which has three staterooms and cruises at 15 knots on twin 370-hp Yanmars. “It was the vehicle that got our 17 ‘ tender wherever we needed it.” But running the little boat 60 or 70 miles a day lost its charm. “One of the things I wanted was a twin-engine tender that would have more room for dive gear. That ended up being a 26 ‘ Calcutta, so I needed a bigger mother ship.”

With accelerating climate change, the carbon footprint of ships and large yachts is under scrutiny, but hydrocarbons still win when speed, range, and payloads are priorities. While H-2 doesn’t break the mold there, Schmitt pointed to the project’s virtues as a U.S. domestic build. “You can’t complain about global warming when you’re flying around in your G500 jet that’s contributing more CO2 emissions than anybody else in the world,” he said. “You can’t complain about all the boats being built in Germany, The Netherlands, and Italy, and then go buy a boat [there].” Schmidt wanted to build locally, keeping jobs and money in the U.S. Besides, he noted, this approach simplified communications and enabled him to personally check on progress during COVID. Perhaps most importantly, he could pick a team of trusted and compatible mates to turn his dream into a boat.

The vast build hall left vacant when Gunboat left Wanchese, North Carolina.

He selected John Marples, a fellow pilot, inventor, and multihull specialist for the design and Felix Herrin to build H-2 . Both men had worked for him on Hippocampus , and their familiarity helped when meeting today’s challenges, such as damaging trade tariffs that drove up aluminum prices, and a pandemic that killed millions, wreaked havoc on global supply chains, and caused labor shortages in industrial sectors. These factors have conspired to delay H-2 ’s launching by roughly two years and counting.

Advantage Aluminum

A key decision early on was to build in aluminum, which promised a robust structure but required extra steps to deal with corrosion and noise mitigation. “Construction was reduced to something simple—a V-bottom deadrise model, stretched out,” Marples explained. “There wasn’t any benefit to round bilges on an aluminum boat. You’d have to add internal structure to support the flat panels, and it drives the cost and difficulty of construction way up. We’re talking about a speed-to-length ratio of 2 or less, which is not a big deal. His current boat would do a speed/length of about 3, so the extra length means that you’re never really pushing the boat that hard, so shape was not a huge consideration.”

Marples and Herrin go back at least three decades to their mutual acquaintance with naval architect and boatbuilder Dave Dana, who assisted Marples with the hull design for Admiral Pete , a catamaran passenger ferry still serving Puget Sound. Herrin works with different construction materials, but having built crew boats for Petróleos de Venezuela (PDVSA) at Sea Force in Palmetto, Florida, he has spent considerable time with aluminum.

Taking a break during IBEX 2021 are builder Felix Herrin (left) and owner Brian Schmitt. H-2 is their second joint project with designer John Marples.

The structural components on H-2 are 5083-H32 alloy aluminum plate and extrusions of 6061-T6 alloy. Scantlings, materials, and weldment comply with the American Bureau of Shipping’s (ABS) 2016 design guidelines for pleasure motoryachts. Hulls and wing structures have transverse frames and bulkheads spaced on 36 “ (0.91m) centers. Those frames are supported by substantial centerline vertical keels (CVKs) welded atop twin 3 “ x 8 “ (76mm x 203mm) solid extruded-aluminum-bar keels. Intermediate subframes in the forward and aftermost hull compartments strengthen the hulls for operating in ice. Schmitt indicated he wants to traverse the Northwest Passage. For the same reason, there’s 3⁄8 “ (10mm) plate running the length of the boat above and below the waterline.

The topside and underwing plating is primarily ¼ “ (6mm), with areas of 5⁄16 “ (8mm) to strengthen slamming zones in the bow. The main deck plating is also 1/4 “ while the foredeck plate is specified at 5⁄16 “ . The bottom plating is 5⁄16 “ in the aft two-thirds of the hull and 3⁄8 “ forward. “We built all the frames and bulkheads first, then scarfed together the keel sections [and] lined those up on the bunks that we built on,” Herrin explained. “We welded the CVK on top of the keel, then started installing frames.”

Hulls and wing structure have transverse frames and bulkheads on 36″ (0.91m) centers. The hulls are supported by centerline vertical keels.

Herrin said he changed aluminum suppliers midway through the project, sourcing from Bayou Metal Supply , an ISO 9001:2015–certified distributor in Slidell, Louisiana. “We sourced the material from Greece and from domestic suppliers,” said Taylor Smith, who handles Bayou’s sales. Tariffs, he said, did not slow down business much, but the aluminum cost more. “Felix sent cut files. We had the material in inventory, we cut it, processed it on a router, and shipped it on time. Everything flowed well.”

Naval and structural engineering and detailing was contracted out to Van Gorkom Yacht Design in Portsmouth, Rhode Island. “My first responsibility was looking at structures,” Geoff Van Gorkom said. “Given that this is an aluminum yacht, we can do literally all the structures in 3D and have all the metalwork precut before it came into the yard. All the frames and longitudinals and all the primary structure were precut, which saved huge amounts of time.” Van Gorkom said he uses Rhino 3D and some of the numerous modules such as Orca 3D for hydrostatics and hydrodynamics, and 2D AutoCAD to produce construction details.

Helping save time and money, 3D-modeling allowed frames, longitudinals, and the primary structure to be cut before being sent to the building site.

Van Gorkom observed that H-2 is not a fussy high-performance vessel that needs minimum weight to achieve maximum speed. Besides ABS guidelines that address torsional loads in catamaran structures, he also consulted A.L. Dinsenbacher’s paper “A Method for Estimating Loads on Catamaran Cross-Structure” ( Marine Technology , Vol. 7, No. 4, October 1970) to estimate load conditions in beam and quartering seas. “This is going to be a very stiff boat. It’s going to be a very strong boat simply because it has to be, and that was one of the criteria that Brian put out there right from the very start of the project. The boat is sturdy and stout, a strong expedition yacht.”

Van Gorkom also engineered the setup for a folding deck crane housed under a flush hatch in the helideck on the port side to launch and retrieve the two-man submarine or the ATV. “It’s basically an enclosure that opens up, so the crane extends out,” he explained. “It comes up on a telescoping pipe to swing out and pick up something from the side of the boat.” It required support from beams on each side of the crane and cutting a slot in the helideck for the lifting bridle so the loads can move inboard or outboard. On the starboard side, the 5,500-lb (2,492-kg) Calcutta tender is an even heavier load moved by twin overhead beam cranes. The 17 ‘ Twin Vee is launched and retrieved from the foredeck with a 2,500-lb-capacity (1,153-kg) crane.

Catamarans are known to be weight-sensitive, so how will H-2 handle the weight of all the toys and high superstructure? The arch over the flybridge is 33 ‘ (10.05m) above waterline, Van Gorkom confirmed. “Add another 10 ‘ [3.05m] for the radar, mast, etc., so a comfortable bridge clearance would be around 45 ‘ [13.7m].” Marples conferred with Van Gorkom about the effect of the added weight on the center of gravity, which was deemed “almost imperceptible,” Marples remembered. A quick calculation suggests that a 5,500-lb deck load is equal to only 1.57% of a full-load displacement given as 350,000 lbs (158,550 kg).

High Power, Low Noise

Van Gorkom hired engineers at HydroComp to evaluate the design’s hydrodynamics and propulsion systems, including the influence of hull-shape parameters and demi-hull spacing on resistance. HydroComp also offered a speed-power prediction to aid with engine selection and recommended optimum shaft rpm and propeller parameters. Technical director Donald MacPherson, who prepared the report, outlined the process and findings: “Particularly interesting for this project was the use of its novel analytical distributed volume method [ADVM] for the vessel’s resistance modeling. This 2D technique (between parametric methods and CFD) uniquely allows for assessment of the influence of local sectional area curve regions (such as ‘shoulders’ or inflections) in wave-making drag. It also directly evaluates the effects of catamaran hull spacing.” HydroComp helped optimize the hulls by identifying the regions that contribute most to wave-making drag, and securing a 3% reduction in total drag at the design speed by making what MacPherson called “very minor changes to the immersed volume distribution.”

Rob Ayers works on the installation of the starboard engine’s Evolution Marine Shaft System that will be fitted with a 36″ (0.91m) five-blade propeller.

That simulation was mapped to benchmark performances of four similar catamarans, and the process was run for two design variants, followed by a propulsion simulation for partial-load conditions. The hull-spacing study concluded that the originally designed 35 ‘ (10.7m) beam remained suitable despite the boat being 20 ‘ (6.1m) longer than originally drawn. The chosen propulsion system comprises two MTU 10V 2000 M96, 1505-mhp diesels with ZF 3000 flange-mounted marine gears, providing an estimated top-speed range of 20–22 knots, cruising speeds of 12–15 knots, and 10–13 knots for long-range voyaging. Actual performance will be established during sea trials.

The recommended propeller specifications developed by HydroComp were for five-blade models with 36 “ dia­meters. HydroComp applied Prop­Elements, a wake-adapted propeller-analysis tool, to determine the advisability of installing a nozzle or shroud to restrict transmission of pressure pulses to the hull and to create a more uniform inflow. This would reduce interior noise but would increase appendage drag and power demand. Schmitt said he will wait to see if cavitation or prop noise is an issue before making a final decision.

He invested heavily in noise and vibration mitigation, knowing that an aluminum boat won’t provide the natural sound-dampening of a wood/epoxy structure like that of his first Hippocampus . Consulting with Soundown of Salem, Massachusetts, Schmitt wanted to replicate what worked well on his old boat, starting with the Evolution Marine Shaft System, in which the prop shaft runs in an oil-filled tube and uses roller and needle bearings instead of standard water-lubricated bearings. “You have a lot less shaft noise, but one of the primary benefits of an integral thrust bearing is that it transmits all the thrust directly into the hull, as opposed to pushing on the gearbox or the engine and gearbox combination,” said Sam Smullin, Soundown’s marketing and quality assurance manager. “It allows for a much softer engine mounting, so you reduce the noise from the shaft itself and get a much quieter engine installation, which reduces structure-borne noise.” Because of the relative weight sensitivity of catamarans, Smullin said, “it’s particularly important to do a really good job on the driveline.” His father, Joseph Smullin, president of Soundown and J&A Enterprises Inc., an engineering firm for noise and vibration control, estimated that this could reduce driveline noise levels by 5 dBA to 10 dBA compared to a conventional system.

Clemente Perez, one of Herrin’s build crew, works on the interior. The extensive sound and thermal insulation includes foam sprayed into the cavities.

Soundown also looked at the two 38-kW Northern Lights gensets, which have double-isolation mounts to reduce structure-borne noise. The firm also recommended structural changes to ensure that the mount foundations were as stiff as possible.

Energy from propulsion or generator engines invariably transmits to the boat structure and then resonates through big, flat panels like bulkheads, decks, ceilings, and liners, causing the familiar vibrating rattle. To dampen those vibrations, Herrin said he used Roxul, a lightweight, semi-rigid stone-wool insulation for fire resistance and sound control. His crew also sprayed cavities with Dow Froth-Pak, a quick-cure polyurethane foam for thermal insulation, and installed Sylomer (a microcellular PUR-elastomer) between the structural components and the floors, walls, and panels. “We glued the Sylomer, which is kind of a spongy foam, to the structure of the boat, and then the plywood of the subfloors and walls are glued to that,” Herrin explained, adding that this created a floating interior without any fasteners.

The plywood, called QuietCore, is a composite sandwich panel comprising marine plywood skins and an acoustic damping layer that converts acoustic energy into small amounts of heat that are dissipated. Soundown claims that an 18mm (0.7 “ ) QuietCore bulkhead can reduce noise transmission by up to 10 dBA, an audible reduction 50% greater than with regular marine plywood of equal thickness.

Electricity for a Small Town

Going off grid on H-2 does not mean anyone will suffer, as long as the electrical system keeps powering the boat’s myriad house loads—hydraulic Maxwell windlasses and thrusters; a Webasto air-conditioning system; two full-size stand-up freezers, two refrigerator freezers, and two under-counter refrigerators in the galley, all by Vitfrigo; Krüshr compactors for recyclables and garbage; Headhunter sewage-treatment system; Alfa Laval fuel-polishing system; two FCI watermakers; a complete set of Garmin navigation electronics with full redundancy; and a Böning vessel control and monitoring system.

Two Northern Lights 38-kW gensets are the heart of H-2’s AC system, which also includes a 37-kW Atlas inverter to connect to shore power in foreign ports.

Much of the AC side was designed and specified by Ward’s Marine Electric in Fort Lauderdale, Florida, in cooperation with OceanPlanet Energy of Woolwich, Maine, and principal Bruce Schwab, who helped design and integrate the DC components. “Today there’s a big trend in the industry to use shore-power converters as inverters and superlarge lithium-ion battery banks to provide power, at least temporary power, for major loads like air-conditioning, chiller plants, and things like that,” said Ward Eshleman, chairman of Ward’s Marine Electric. “So, rather than using only smaller inverters and synchronizing them and stacking to get additional kW, the trend for the larger vessels is to use shore-power converters as inverters. There is an inverter bus in the main switchboard.”

True to its go-anywhere mission, H-2 was fitted with an Atlas 37-kW inverter to connect to shore power in places that do not serve 60 Hz, 240V single-phase power. “We can take anything from 90V to 400V and pretty much anything from below 50 Hz to the 60 Hz and single- or three-phase,” Herrin explained.

Eight GTX24V315A-F24 lithium-ion batteries from Lithionics are split between a house bank that can run all DC loads for at least 24 hours, and an emergency bank to operate critical DC loads—display screens, radios, nav lights—for 24 hours. The boat is equipped with 10 Solara Ultra-S 160W panels paralleled in two groups of five each, connected to two Victron SmartSolar MPPT 100/50 solar controllers to charge the house bank. Given enough sunshine, solar and battery power should be “capable of running lights and refrigeration but not air-conditioning or heating,” Schmitt said. “Since we will likely spend most of our time in the tropics, we did not believe that solar power alone could do the job we needed.”

OceanPlanet Energy specified four Victron Buck-Boost DC-DC converters, two for each engine, to help charge the house bank from the starter batteries without having to modify the engines’ stock alternators, which would have voided the warranty. “The converters activate based on the input voltage from the starting batteries,” Schwab explained. “With lower rpm, the alternators would not produce enough current to feed both converters without the starting-battery voltage dropping, turning the converters off. Then the voltage will rise, the converters turn on again, drop the voltage, turn off…over and over. Staggering the input voltage cut-in, hopefully starting the converters one at a time, will more smoothly supply power to the house bank across the engine/alternator rpm range.”

OceanPlanet Energy specified the DC system including DC/DC converters and hefty battery banks to power house loads and critical electronics.

There are two 4,500-watt 240V split-phase engineroom-ventilation fans connected to two Victron Quattro 5-kW 24V inverter-chargers configured for 240V/120V split-phase AC loads. They can accept AC inputs from two sources (shore power or generators) and automatically connect to the available source. “In the event of a grid failure or power disconnect, they take over the supply to the connected AC loads by inverting from the Lithionics house-battery bank,” Schwab said.

“It’s more complicated than that,” according to Herrin. “Typically, we’re going to be operating with the A-bus and the B-bus tied together, so we can power everything with one generator. The B-bus actually passes current through the Victron inverter-chargers on its way to the load. We have the ability to split the A-bus and the B-bus and run the A-bus on one generator and the B-bus on the other in the few instances we’re exceeding the capacity of one of the generators. If we lose both generators, then the essential loads are still going to be carried,” meaning engine vents or water pumps.

Redundancy and emergency backups also figured largely in the deliberations of John McKay, manager of the Switchgear Systems Division at Ward’s Marine Electric and point man for this project.

One of his challenges was limiting the voltage drop in the estimated 53 ‘ (16.2m) cable run between engines, which in an emergency allows the starboard engine to be started from the port battery and vice versa. “For a starter group, you can allow a 20% voltage drop,” McKay said and noted that starting the engines requires 720 amps, while the gensets needed only 200 amps. “I was keeping the 720-amp current between 7% and 11% voltage drop, getting up to some pretty good-sized copper. Some sections of the run were 240mm2 [500MCM] cable.” Knowing that the boat is capable of going to high latitudes, McKay recalled his youth and the frigid winter mornings in Massachusetts, “where you can crank a diesel all day long at a low rpm, and it’ll never start. You just need to turn it over one or two times at a higher rpm, and it’ll be running. So, I was making certain that the starter was going to crank at the highest rpm possible and not lose it all to voltage drop.”

Protecting Assets and Finishing the Job

No matter how fast or how far H-2 will travel, corrosion caused by galvanic current between dissimilar metals, by stray currents or by electric fault, is an enemy that needs to be kept in check. That’s the calling of Ted Schwartz, who runs Electro-Guard (Mount Shasta, California). He’s one of the country’s foremost experts on cathodic protection, and also served on ABYC’s E2 Cathodic Protection Project Technical Committee.

“We designed the system and supplied all the equipment and steered them through the installation,” Schwartz said. It’s a 15-amp impressed-current-cathodic-protection (ICCP) system, model 715 A-2, with three anodes and two reference cells. Regarding the boat’s Evolution shaft system with driveshafts running inside an oil-filled tube, Schwartz said: “It was a real challenge because you can’t actually make contact with the propeller shaft on the inside of the boat.” He consulted with Soundown and found a solution. “At the coupling on the inboard end of the tube, a bit of the shaft stuck out through the seal,” Swartz said. “There’s this coupling that Soundown built that fastens to the shaft, and we asked them to provide a surface on that coupling where we could put our silver slip rings on [to provide an electrical connection] to protect props and shafts.”

Every anode can deliver up to 5 amps of current using its own current controller that receives a signal from the main controller, which determines exactly how much current each anode will put out. The entire system consists of three anodes, three current controllers, the main controller, and a separate monitoring station connected to the controller by signal cable. Later, Schmitt also ordered a backup system employing aluminum sacrificial anodes.

On catamarans, the company installs a reference cell aft near the prop of each hull, and an anode on the aft section of each hull, and one anode amidships on the inboard side on one hull.

Chromate, two layers of epoxy, copious amounts of fairing compound, and various primers rendered the surface fair and ready for a yacht-quality paint job.

At the time of this writing, the vessel had been shot with chromate and two layers of epoxy before approximately 500 gal (1,893 l) of fairing compound and 325 gal (1,230 l) of various primers rendered the surface fair and ready for a yacht-quality Alexseal paint job with 35 gal (132.5 l) light ivory, 24 gal (91 gal) stark white, and 2 gal (7.6 l) cordovan gold. Parallel to the exterior, construction was on the home stretch with installation of the crew quarters and the saloon overhead. On the systems side, pressure checks were performed for hydraulics and plumbing.

Since H-2 is a much larger and more complex vessel than the original Hippocampus , with a multitude of systems that need to be managed, monitored, and maintained, I was curious how many crew Schmitt was planning to hire to help run his new boat. He said he consulted with captains and headhunters, and “the consensus is three or possibly four at most. I just completed my 100-Ton Masters and will build time on the new boat as well. We won’t charter and are not accustomed to being cooked for or served or having our beds made and all that. So mostly I’m looking for a qualified captain and engineer to maintain the systems.”

Little surprise that a hands-on operator like Schmitt does not want to cede too much of the game he loves to play. But as big, bold, and broad-shouldered as H-2 will be when she finally emerges from the old Gunboat shed in Wanchese, the proud owner is quick to remind anyone that it’s still “a vehicle to get the toys wherever.”

H-2 : The Designer’s View

H-2 ’s owner, the adventurous Brian Schmitt, has dived into deep caves to see submerged caverns, hand-fed large sharks that would normally view him as food, and spent years in his off-time exploring Caribbean archipelagos in Hippocampus, his current 19-year-old 57 ‘ (17.4m) power catamaran. Nearing retirement age, he gave the order for his “ultimate” yacht.

The foldable hydraulic deck crane to launch and retrieve a two-man electric submarine or an all-terrain vehicle required cutting a slot in the helicopter deck for the lifting bridle.

The first talk about the new design was between the owner, the builder, and me. As we discussed the mission of the boat, it became clear that it would fall into the category of expedition vessel with more guest staterooms, more range, and more room for equipment than his old boat. Brian defined the function of the vessel as a carrier for a 26 ‘ (7.92m) twin-outboard catamaran, an outboard skiff, a small car, and a small helicopter, which needed a flight deck. This vessel was to be used with family and guests while also serving as an operations base for outbound travel by air, land, or sea.

Aside from commodious accommodations, a key requirement was comfortable motion on rough seas. This was to be a catamaran, like his current boat, which offers extensive real estate afloat in a seagoing vessel. The only restriction for the new design was a beam no greater than 35 ‘ (10.6m) to fit the largest Travelift.

The trade-off for overall beam width involves room versus roll motion. A wider catamaran responds more quickly to roll in seaways but with less amplitude, whereas a narrower beam rolls more slowly with slightly more amplitude. The slower roll is preferable as long as overall roll stability is maintained. Roll in catamarans is unlike roll in single-hulled vessels. Because the vessel is supported by two buoyancy chambers (hulls) with distance between them, motion has little to do with roll inertia, but rather with response of the hulls to the seaway. Each hull responds to a passing wave independently by heaving (up/down) and rolling, which is a circular motion around the center of gravity (CG) that translates to lateral motion when standing above the CG, especially high up on the bridge. Power catamarans, unlike sailing catamarans, do not require wide hull spacing to generate righting moment (to support a sail plan), so they can have closer hull spacing, which still preserves sufficient stability, slows wave-response roll characteristics, and takes up less space in port.

One of the expected routes for this vessel is the Northwest Passage over the top of North America. Boats venturing there can expect floating ice, so we added thicker hull plating at the waterline and an ice-separation chamber on the cooling water intakes. We also designed the hull to give the propeller protection by positioning it behind a deep canoe-stern afterbody with no exposed shaft. A rudder horn, below the propeller extending aft from the hull, adds support for the rudder and protection for the prop. This configuration is useful as a hedge against the possibility of grounding. In fact, this boat can be careened on the beach between tides if necessary for repairs. The hull includes a strong, deep, vertical keel structure that allows for blocking anywhere along its length.

Speed and range became the largest determinates of the design. A maximum range of 4,000 miles at 15 knots (enough to cross the Atlantic Ocean) was proposed. Catamarans are easily driven at modest speeds due to lack of significant wave resistance by narrow hulls. A preliminary speed prediction analysis showed that we would be in the ballpark with about 1,400 hp (1,050 kW) and 5,000 gal (18,925 l) of diesel per hull. The final installed fuel capacity is 12,500 gal (47,313 l).

The general arrangement plan shows crew quarters in the hulls, three guest cabins, office, saloon, and galley on the main deck and owner’s suite on the bridge deck level.

A totally new design normally goes through a lengthy proposal and critique cycle between designer and client, especially if the client is knowledgeable and involved. The vessel’s first iteration started at 90 ‘ (27.43m) LOA, but it became evident that it needed more length to relieve a number of ills. After adding 10 ‘ (3.05m) we saw improvements, but it wasn’t until the 110 ‘ (33.5m) length proposal that we felt all the requirements had been satisfied: more slender hull shape, more open interior space, and better placement of machinery and tankage. The flight deck for the helicopter became larger, and the forward superstructure fairings gave the boat a sleeker look. And at 110 ‘ we achieved an efficient length versus waterline beam ratio that reduced wave drag and fuel consumption at the target cruise speed.

While beam remained at 35 ‘ , lightship displacement increased significantly to 230,000 lbs (104,190 kg). Accommodations now include crew quarters for four persons in the bows; three double guest cabins and a ship’s office forward; a large saloon amidships with adjacent galley, and a dive and a storage locker aft on the main deck. The upper deck is arranged with a full-width-bridge steering station forward, protected by a Portuguese bridge, and a master stateroom with en suite bathroom aft. The flight deck extends aft of the master stateroom. Access to the upper deck is by either a staircase from the foredeck, an interior staircase adjacent to the ship’s office, or by stairs from the starboard side deck.

The largest variable weight on the boat is fuel, so the tankage is located amidships to minimize its influence on trim. Engine and machinery rooms aft of the tankage take up the remaining spaces all the way to the transoms. Other amenities include a utility area aft of the crew quarters port side with storage and washing machines, and a walkway through the tank spaces and enginerooms to the boarding decks at each transom. Another late addition is the flying bridge to aid with shallow-water operation by improving the vantage point to see coral heads and other obstructions. Its protective bimini serves as a mounting platform for lights and antennae.

—John R. Marples

Read more Construction , Design , Drawing Board , Yards articles

• CNC Construction on the Rise

How computer-aided design and software-controlled manufacturing technologies have reshaped custom and semi-production boatbuilding.

Hull Vane: A Wing With Benefits

Typically, military ships are designed and built for specific missions, not to curb their carbon footprint. However, if the Dutch navy serves as an example, that is about to change…. Read more »

Reid Bandy, the Carbon Minimalist

Reid Bandy designs and builds a stripped-down superefficient carbon fiber sportfisherman.

Recent Posts

• Learn Electrical Systems from Nigel Calder
• PRO-SET Epoxy Named an Official Supplier for New York Yacht Club American Magic, Challenger for the 37th America’s Cup
• Marine Trade Education News
• Sea Hawk Paints’ Colorkote is ‘reinventing the art of antifouling’
• Companies (82)
• Construction (105)
• Design (156)
• Drawing Board (8)
• Education (24)
• Environment (15)
• Events (20)
• Materials (48)
• Obituary (17)
• People/Profiles (46)
• Products (16)
• Propulsion Systems (30)
• Racing (15)
• Repair (37)
• Rovings (313)
• Short Cuts (3)
• Sponsored Partner News (13)
• Systems (80)
• Task Sheet (1)
• Uncategorized (26)
• Wood to Glass (7)

ProBoat.com Archives

Cruise, Play, Stay

With all the comforts of home, arrowcat brings back the 20' center console, a unique design, understand why.

Enjoy your boat year-round and stay warm and dry during cooler weather or overnight trips, while also having a comfortable and private space to retreat for whenever you need a break. Here are a few reasons why an ArrowCat power cat is an excellent boat to consider.

A Catamaran Boat

Catamarans have two hulls, which provide more stability in the water. They are less likely to roll or pitch, which means they offer a more comfortable ride, especially in rough conditions and for people who are prone to seasickness.

Power catamarans are typically more fuel-efficient than monohull boats of the same size. It requires less energy and yields more performance per HP. The two hulls create little to no drag or resistance to get on plane, resulting in greater fuel economy. Allowing for longer journeys with fewer refueling stops. 

Power catamarans have a shallow draft which means they can navigate in diverse cruising grounds – beaches, islands, rivers, channels, and coastal areas with limited water depth. 

An Express Cruiser

Cabin boats are designed with comfortable sleeping quarters and living spaces. They feature a sleeping space with a bed, a galley with a stove, sink, and refrigerator, and a head with a shower and toilet.

Cabin boats provide protection from the elements, such as wind, sun, and rain. This allows for comfortable cruising in a variety of weather conditions, as well as providing a haven during storms

Express cruisers are designed for efficient and fast navigation, offering higher speeds compared to traditional cruising boats. They usually have powerful engines that enable them to cover long distances quickly, making them ideal for day trips or weekend getaways.

Powered By Outboard Motors

Outboard motors can provide excellent performance and speed. They can often reach higher speeds than inboard motors of the same horsepower.

Outboard motors have a simple and standard design and are relatively easy to install, they do not require additional components such as a transmission, propeller shaft, couplings, and struts, that inboard engines do. They are easily assessable and cost less to maintain than inboard motors because they are mounted outside at the rear of the boat.

Outboard motors are often designed with features that make them easy to maneuver. For example, they can be tilted or rotated to provide precise control and handling in tight spaces and shallower waters.

ArrowCat Power Catamarans

The outboard powered express cruising catamaran.

ArrowCat Express Cruisers are designed from the ground up to maximize comfort, performance, durability, and fuel efficiency, making them a better choice for both in-shore and off-shore family cruising. We build our powercats with your safety and enjoyment in mind, designing our signature interior cabin so that you’re not limited by the outside elements, but rather have the ability to enjoy your vessel at any given time, regardless of weather or location. Superior construction, optimized performance, economy, and safety can be found in every ArrowCat we make.

Explore Our 32' & 42' Signature Cabin Models

Perfect for offshore and inshore cruising, long distance and overnight trips, cold off seasons and hot boating seasons, and much more. The ArrowCat 32-foot and 42-foot models provide an exciting and versatile experience on the water. Explore to see which one could best suit your boating lifestyle.

ArrowCat 320 Coupe

Express Cruiser Catamaran Hull Planing Hull Design Twin Outboard Motors Standard Layout: 2 Cabins/ 1 Wet Head Trailerable Optional Tower Upgrade LOA: 31′ 2″/9.50 meters Beam: 10’/3.05 meters Draft: 20″/.508 meters

ArrowCat 420 Coupe

Express Cruiser Yacht Catamaran Hull Planing Hull Design Twin Outboard Motors Standard Layout: 2 Cabins/ 1 Full Head LOA: 41′ 9″/12.73 meters Beam: 14′ 9″/4.5 meters Draft: 18″/.46 meters

ArrowCat 420 Flybridge

Express Cruiser Yacht Catamaran Hull Planing Hull Design Twin Outboard Motors Standard Layout: 2 Cabins/ 1 Full Head LOA: 41′ 9″/12.78 meters Beam: 14′ 9″/4.5 meters Draft: 20″/.5 meters

Smooth, Fast, And Stable Ride

Talk To One Of Our Sales Experts To Schedule A Sea Trial & Experience The Feel For Yourself

Privacy Policy

13 Best Small Catamarans For Cruising 2024

The best small catamarans for cruising are affordable and comfortable, making great sailboats for a number of different purposes. If you’re looking for the best small catamarans to start your cruising life then look no further!

When searching for a catamaran for our adventures we scoured the internet for any and all information we could find on just about every size, shape, and model!

Although in the end, we opted for a bigger catamaran, in the hopes of having more family and friends on board, we did heavily research the best small catamarans as an option.

Each small catamaran has different pros and cons. As with every sailboat, there will be compromises, but hopefully, this post will help you firm up what you’re really looking for in a multihull and find the right smaller catamaran for you!

Here are what we consider the best small cruising catamarans out there, costing anywhere from $40,000 to $300,000. You can also read up on the average costs of sailboats here.

Why choose a small catamaran for cruising?

The downsides to small multihulls for cruisers

The best small catamarans for ocean sailing

The best small catamarans for coastal cruising

Why Choose A Small Catamaran For Cruising?

The main advantage to choosing a small catamaran for cruising has to be the cost. Not only are smaller sailboats cheaper to buy initially, but they are also cheaper to maintain and to dock in marinas or dry storage.

Why buy a small catamaran over a monohull? This isn’t the post to go into the pros and cons of multihulls vs monohulls, but a few of the main reasons you might prefer to buy a small cat over a bigger, cheaper monohull is the living space and the comfort underway and at anchor.

Living on a sailboat is very different from taking the boat out for a sporty sail every now and again. Having a catamaran over a monohull means you won’t be heeling or rolling at anchor half as much, you can leave out your coffee cup, and you have the space you need to spread out a little.

A small catamaran will enable the more comfortable lifestyle you’re seeking at a more reasonable price tag. So what’s not to love about small cruising multihulls?

The Downsides To Small Multihulls For Cruisers

Of course, just with everything in sailing, there are always compromises to be made when it comes to small multihulls.

One of the biggest downsides for cruisers is the weight issue smaller catamarans present. You won’t be able to carry half as much as you would on a larger catamaran or monohull, which might be a problem if you live onboard full time.

The other negative is that smaller boats usually aren’t quite as seaworthy as larger ones. You might find you’re limited to coastal cruising if you choose a small catamaran, so make sure you have your cruising intentions in mind before you buy.

Another big thing to look out for when it comes to choosing the right small cat for you, is the bridge deck clearance. This is often worse on smaller catamarans, and can cause nasty slamming in any sort of sea, both when sailing and at anchor.

With these downsides in mind, we’ve split this post into the best small catamarans for ocean sailing and the best for coastal cruising. Obviously this is a little subjective, as many people have sailed around the world in much smaller and less seaworthy vessels!

The Best Small Catamarans For Ocean Cruising

#1 wharram tiki.

• Suitable for: Bluewater sailing
• Fixed Keels
• Draft (max): 2.08′
• Engines: Single outboard, though some versions have twin inboards
• Price: Roughly $100,000

We have lusted after the Wharram catamarans since our adventures began and would have opted for one of these if we had found one for sale this side of the pond.

Designed by the legendary James Wharram, these small multihulls are pretty unique. They are based on the Polynesian catamaran design, and the plans enable you to self-build these boats if you have the time, money, and space for a project of this magnitude.

If you aren’t keen on taking on a project then you can commission a boat builder to complete the design for you, or buy one second-hand. The advantages of having one made yourself are that you can tweak things to your personal taste, and you can even contact the Wharrams themselves to see if they can adjust the designs for individual requests.

The Wharram catamarans have a lot of charm dues to their traditional design, and the old-fashioned appeal continues inside the boat too. You won’t find the same huge hull space as some of the modern design catamarans now have, but the outside entertainment space is perfect for entertaining.

These small catamarans don’t have an inside space across the hulls, so all of your inside living space is below. If you’re used to monohulls then this won’t be a problem but if you like the idea of a galley-up then these boats aren’t for you.

Wharram catamarans, especially the Tiki 38, have great reputations as around the world, bluewater boats. They have fantastic bridge deck clearance so slamming is minimum and they sail well.

Most models have a double cabin and two singles, a galley, a head, and a small salon area below. They are smaller catamarans than many newer 38ft multihulls but this does make them more affordable.

A big appeal for us was the fact these boats are designed to be self-made. Although a secondhand model could potentially come with a lot of problems (get a decent survey before you buy!) it does mean that almost everything onboard can be self-fixed. This is a huge bonus if you plan on sailing your small catamaran around the world.

Another thing we loved about these smaller catamarans is the fact they have outboard engines, which we felt would be easier to maintain and replace if necessary. This is a personal choice though so consider this before you get your heart set on one!

One of the downsides to the Tiki 38 is that there aren’t many of them around. These are unique boats and they don’t come on the market frequently. When they do, they tend to be scattered all over the world so you’ll have to be prepared to travel to find one!

#2 Prout Snowgoose 37 : Small Catamaran For Ocean Cruising

Prout catamarans are a popular choice for cruisers, and you’ll find many owners who have circumnavigated in them. The Snowgoose is no exception. Prout no longer exists as a company, as it was bought by Broadblue in the 90s.

Broadblue still makes catamarans today, and they have very similar features to the original Prouts, though obviously they are far fancier and have all the benefits of a more modern design!

The Snowgoose is a great small multihull to go for as you get quite a lot of space inside and out. We weren’t sure about the berth in the salon area, but it might make a great space for a baby or small child while underway!

The compromise in the Prout Snowgoose is the bridge deck clearance and this was something that put us off these smaller cruising catamarans. A low bridge deck clearance makes the boat slam in waves, both at anchor and underway.

#8 PDQ 36 : A Small Catamaran Without Too Much Slamming

• Suitable for: Bluewater
• Draft (max): 2.82′
• Engines: Twin inboard or outboard
• Price: Over $100,000

These small catamarans have an excellent reputation among cruisers because of their solid build and use of decent materials. They come with either outboard engines for coastal cruising or inboard engines designed to withstand offshore use.

If you like the sound of the PDQ 32 but need a little more room then you’ve got that here! It’s also a boat that people have crossed oceans in, though you might want to consider something more tried and tested like the Prout Snowgoose or the Wharram if you’re planning longer ocean sails.

The boat has three cabins, a galley, salon and head, but there’s a more spacious feel compared to the smaller model. Again, the bridge deck clearance is good so you shouldn’t experience too much slamming.

#9 Lagoon 380 : One Of The Most Popular Small Multihulls

• Fixed keels
• Engines:  twin diesel engines
• Price:  from $100,000, used

The Lagoon 380 is one of the most popular catamarans out there, and you’ve probably already spotted a lot of them in your search! This is a great option if modern cats appeal to you, as it’s pretty ‘with the times’ as far as smaller catamarans go!

There are lots of different layouts of this boat available all over the world. Some were built for charter with numerous berths and others were commissioned for couples or families with differing cabin and head options.

This is a proven catamaran from a reputable company, but obviously with so many of these boats out there, they come in a range of conditions. Make sure you get a thorough survey done before purchase!

Lagoon 37 TPI

• Draft (max): 4′
• Engines: Twin inboard diesels 
• Price: Over $100,000 USD 

This is the smallest catamaran built by Lagoon, and unfortunately there aren’t many of them out there. These boats were built mainly for the charter market, and have a smaller rig than some similar sized catamarans.

There are two big queen-size forward doubles port and starboard and a smaller double in the starboard hull aft. The galley and salon are designed to be simple and timeless, with none of the fancy trims you’ll find in the newer Lagoons.

As this boat was intended for charter it probably wouldn’t make a great ocean-going vessel. For starters, it isn’t designed to carry too much in the way of provisions. That’s not to say it won’t be a suitable bluewater boat with a few tweaks. Sailors who have circumnavigated in them have increased sail area and added folding props to get more speed from the vessel.

#11 Catalac 9M/30

• Draft (max): 2.5′
• Engines:  two outboard engines or one diesel engine
• Price:  from $50,000

The Catalac 9M is a little different to a lot of the catamarans on this list, as it was built for sailing in the North Sea! This is a great small catamaran for anyone wanting a boat built to be safe!

The bridge deck clearance is reasonable but the boat is light, which can make it more prone to slamming. The unique feature of this small sailboat is the hard dodger, designed as somewhere safe and dry to stand in bad weather.

It sails well, though like a lot of catamarans there is technique involved in getting it to tack smoothly. Once you’ve got the hang of though, this boat will make good speeds for its size.

The Best Small Catamarans For Coastal Cruising

• Suitable for: Coastal
• Draft (max): 3.62′
• Engines: Twin inboard
• Price: Up to $300,000 for a newer model

The Mahe 36 is the smallest of the Fountaine Pajot range, and these small catamarans can go for a heafty budget if you find a newer model!

This tiny multihull packs a lot into a small space, and because of its modern features, you’ll feel like you’re in a much bigger boat when you step aboard.

This boat is a fast mover, with an ok bridge clearance and some attractive upgrades compared to their last small catamaran design. Most notably the full-length hard top bimini which has the reviewers raving!

If you have the money to splash out on a newer, more expensive small catamaran then this should definitely be on your list to consider! Although they come with a large price tag, these small catamarans are considerably cheaper new than some of the bigger models.

#4 Gemini 105Mc (34ft)

Suitable for: Coastal cruising Centreboards Draft (max): 5′ Engines:  Single inboard Price:  from $80,000

The Gemini 105Mc is still in production in the US, which speaks to its popularity. Obviously if you buy new you’ll pay a much higher price! This is one of the smallest catamarans on the list, but it’s still a great option for coastal cruising (or some have even successfully completed ocean passages on them in relative comfort).

For a small multihull this boat sails pretty well and is fast for a coastal cruiser. The living space is decent with good headroom. It has two double cabins and a master bedroom, and the interior finishes are nice too.

A big negative to this boat is the bridge deck clearance which really isn’t amazing, but as we said at the start, there’s always a compromise! This is a sporty-looking little catamaran that’s a good contender for the top smallest catamarans out there!

#5 EndeavourCat 36

Suitable for: Coastal cruising Fixed keels Draft (max): 3′ Engines:  two inboard Price:  from $100

Designed and built by Endeavour Catamaran, these American built boats are great cruising catamarans. A big advantage to this little multihull is that it will fit into most monohull slips, so if you anticipate using marinas a lot then this might be the small catamaran for you!

This isn’t a slow boat, and owners report speeds of 8-9 knots. Bear in mind though that the narrow beam does make it less suitable for any offshore passages. It has good interior space with 6′ standing headroom throughout, three double cabins, and a decent-sized galley below. The salon area can seat 6 people comfortably.

This cat is great for single-handed sailors, as all the lines lead to the cockpit and the main and jib are completely self-tacking.

#6 Prout Event 34

Suitable for: Coastal/bluewater Fixed keels Draft (max): 2.72′ Engines:  Single inboard Price:  from $30,000

These multihulls are quite hard to find, but if you like the Snowgoose but are on a tighter budget then they might be just what you’re looking for. They share lots of features with the Snowgoose and look very similar, only smaller!

There are three cabins, one head, a salon, and a galley, only they are rather squeezed in compared to the larger model. Personally, we thought there was plenty of space for a smaller sailboat but it’s worth seeing them in person if you’re keen on this model.

They do have the same downsides as the Snowgoose though, with limited headroom and low bridge deck clearance. These boats are known for their slamming!

Coastal Engines:  twin outboards Price:  from $80,000, used

The PDQ 32 is a great budget option catamaran and should be cheap(ish) to buy second hand and maintain. With two outboards that are easy to replace on a smaller budget, you’re looking at some of the usual pinch points on a boat becoming a lot more affordable!

This small catamaran only has two cabins, so sleeps less than a lot of the boats on this list, but it is roomier than you’d imagine inside with a decent galley and salon area. It has decent bridge deck clearance so shouldn’t slam too much in any waves.

This isn’t a boat for longer passages as it is a little small (and perhaps underpowered) to face serious weather. If you’re searching for something to potter around in then this is a fun boat to sail and live in!

#12 Dean 365

Crew Application Freebie

Exactly what you need to write to get accepted as sailboat crew, and some top tips to help you have the adventure of a lifetime!

You have successfully joined our subscriber list.

• Suitable for: Coastal cruising
• Draft (max): 3′
• Engines:  one or two inboard
• Price:  from $45,000, used

These South African catamarans are great little coastal cruising catamarans that are hard to come by anywhere other than South Africa!

They’re pretty tiny, but have enough space for a galley, 3 or 4 cabins, and 1 or 2 heads. Some of the designs even have a bathtub, which speaks of their liveaboard suitability rather than their sail performance!

These boats are some of the smallest multihulls on this list, so don’t expect much in terms of headroom or bridge deck clearance. That being said, if you’re looking for a tiny catamaran to live on and you are prepared to compromise on sailing ability then these are a solid choice.

We have heard that the build quality can vary somewhat with these multihulls, so make sure you do some solid research and get a good surveyor when buying one of these. If you get a good version then they can make really solid boats.

#13 EndeavourCat 30

Suitable for: Coastal cruising Fixed keels Draft (max): 2.1′ Engines:  single or twin outboard Price:  from $70,000

This is a boat built for comfort over all else, so if you’re looking for a budget catamaran to live in then take a look at the endeavourcat 30. Some people don’t like the boxy design, but we quite liked how it looked in the water. I guess it’s personal taste!

This sailboat has two double cabins, a decent sized galley and salon for the size of the boat, and a head. The bridge deck clearance is low so that’s something to bear in mind before you buy, but the headroom is good (another reason why this would make a good liveaboard catamaran).

Hopefully this has given you some inspiration when searching for small catamarans for cruising, and helped you to find your dream boat!

We’re passionate about helping people live this incredible cruising lifestyle, so if you’re planning your dream liveaboard life make sure you check out our guide on how to run away to sea, with everything you could possibly need to know before, during, and after starting this adventure of a lifetime!

Similar Posts

How to Make Money While Living on a Sailboat

101 Awesome Boat Puns And Yacht Captions For Instagram 2024

Cobb bbq review: the best bbq for sailing.

7 Large Cockpit Sailboats: When Size Matters

The Best Hot Chocolate Recipe For Sailing!

13 Best Sailing Lifejackets 2024

Such small mention of probably the best catamaran for overall cruising, focusing on ease of helming, speed and livability. Simple rig, great ergonomic features, style and definitely a pedigree on the water. The FP Mahe duo! Sea proven. Most delivered on their own bottoms from France. Wide beams and light. Beautiful interior arrangements and easy to maintain. I’m confused about so little mention of probably the best entry level and beyond real cruiser out there.

You forgot the edelcat 35. Great boats, and have circumnavigated!

I wonder why Broadblue 346 is not on the list.

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

• Search Search Hi! We’re Emily, Adam and Tiny Cat, liveaboard sailors travelling the world on our 38ft sailboat and writing about it as we go. We hope we can inspire you to live the life you’ve always dreamed, whether that’s exploring the world or living a more simple way of life in a tiny home. Find out more. Patreon
• Privacy Policy

Semi-custom Catamarans

About falcon boats, with decades of experience in composite design, tooling, manufacturing, and naval architecture, the falcon team in 2019 decided it was time to build and brand our own line of unique power semi-custom catamarans..

VACUUM INFUSION BENEFITS: Controlling costs during the build process without compromising the integrity, utilizing state-of-the-art composites, infusing the build of each hull, deck, and components throughout the entire build.  A significantly stronger assembly versus heavy hand lamination.

Related Video

Excitement, Performance, & Comfort comes standard.

From years of experience in repairing, running, and building other brands of boats, the Falcon team knew they could develop a superior product.  We have developed layouts, features, and improved manufacturing technology that result in a build quality that sets Falcon Boats apart. People who really use their boats will appreciate the difference!

Get started with Falcon!

Quick links

• Skip to primary navigation
• Skip to main content
• Skip to footer

Inspired in Kodiak Tailored Professional Design Built in Alaska

Alaskan aluminum power catamarans, llc.

Specializing in building aluminum, hydrofoil assist, outboard powered catamarans

Alaskan Aluminum Power Catamarans specializes in the design and building of aluminum, hydrofoil assist, outboard powered catamarans; producing a welded aluminum boat specifically designed for operating in our rugged Alaskan environment. Each of our boats is influenced by a lifetime Alaskan resident who has spent most of his life both commercially fishing and sport fish guiding around Kodiak. They are designed by an accomplished naval architect specializing in hydrofoil assist catamarans, and each boat is built here in Alaska by a team well versed in fabricating within Alaska’s Commercial Fishing and Sport Boating industry.

The catamaran-style hull is well known for its stability, extra width, and fuel efficiency. However, the asymmetrical hulls on our boats recognize that the water inside a catamaran’s tunnel is different from the water displaced on the outboard sides of the boat when underway. This design helps to further improve on the catamaran idea; preparing for and mitigating chop entering the tunnel for a smoother ride at speed, as well as minimizing drag, increasing fuel efficiency, and range.

Our hydrofoil further improves that catamaran concept and acts like an airplane wing securely fixed between the hulls, providing several inches of lift to the entire boat on plane. Lifting the boat reduces the wetted surface, thereby reducing drag, increasing fuel efficiency, speed, and range. Lifting the boat also increases the distance between the water’s surface and tunnel, further softening and improving the ride in chop. Our hydrofoils are designed and placed to maximize lift at practical cruising speeds and anticipate a variety of load conditions.

Cabin and deck layout are easily customizable and easily tailored to suit your specific tastes and goals for your vessel. We are very happy to work with you and include our own personal experiences and suggestions as we help to create your ideal platform; whether you are a charter captain looking for a layout specific to your clients needs, a remote cabin owner interested in hauling material and supplies, or any normal Alaskan looking to take family and friends out for a day or week of fun. These decisions aren’t new to us and we enjoy helping tailor this technology to your application.

PO Box 888 Kodiak, AK 99615 Phone: (907) 891-8534 MyBoat@AlaskanCatamarans.com Facebook Instagram

• Oyster Barges
• House Boats

Offshore Fishing Boats

40′ Razor Cat

© Copyright 2024 | Website Design by Firefly Marketing Solutions | All Rights Reserved

Be Bold. Be Antifragile.

Don't miss another video, subscribe to our channel

Alubat [al.u.bat] noun | Aluminium Bateau | Aluminum Boat

Open House at Alubat

Join us at the Alubat boatyard in Les Sables d’Olonne, France for our Open House this coming May 31 to June 1 and get on board a new OVNI 370 and OVNI 430.

Amazing 43-ft Aluminum Sailboat

Full-time cruisers Roberta and Duca stopped by to visit us during the La Rochelle Boat Show for a tour of the NEW Ovni 430.

The ‘Small’ Huge Sailboat

Tour of the new Ovni 370 with Duca and Roberta on their YouTube channel Odd Life Crafting.

Aluminum Sailboat Misconceptions

“I have a friend, who knows a guy, who has a cousin, that bought an aluminum boat, and after a week in the marina the bottom fell out of her”.

Alubat Pricing

How Much Does a Well-Equipped Alubat Ovni Cost? Find out how we price the Ovni range of aluminum sailboats for the serious off-shore cruiser.

OVNI 490 Preview

The 490 shares some of the hallmarks of the Ovni range: shaft drive, full sailplan, centerboard, and spacious interior with a raised salon layout.

50 years of sailing excellence!

FIGARO nautisme | by François Tregouet

Half a century old and still thriving, Alubat, the Vendée-based shipyard, is not content with just being one of the world’s benchmarks in ocean cruising with its iconic Ovni yachts. Instead, with the enthusiasm of youth, it is preparing to launch three new monohulls over the next two years.

Link to read article [PDF]

STRENGTH ACROSS THE FULL RANGE OF ALUBAT SAILBOATS

The new generation OVNI 370 with an inverted bow for improved performance and expanded the interior volume.

The new generation OVNI 430 with an inverted bow for improved performance and expanded the interior volume.

The OVNI 450 stands out from the OVNI range and maintains a traditional cabin top styling.

What sets the OVNI 490 apart are the protected pilot house and twin engines. 

Designing and building aluminum boats for blue water sailing. ​

The  Alubat shipyard  has been designing and building aluminum boats for blue water sailing since 1973. With more than 1,600 yachts built and with 50 years of expertise in metal work and carpentry, Alubat has unparalleled experience in the aluminum sailboat market.

Discover More

Aluminum is green

By having the ability to beach your boat, inspecting and servicing your yacht becomes less daunting than having to haul out.

beach your boat

Go places where other sailboats can't.

Centerboard advantages, navigate shallow water.

From the turquoise waters of the Bahamas to the Alaskan ice fields, a lifting keel gives you the peace of mind to navigate in shallow water. 

The centerboard doesn’t sacrifice performance or safety, in fact, it can enhance performance when it comes to downwind sailing. 

Another advantage of a centerboard is the expanded possibilities to find docking in marinas that would otherwise be too shallow for a fixed keel sailboat.

Without the limitations of fixed keel boats, your cruising opportunities can take you through the maze of Europe’s ancient canals and the historic North American waterways.

The centerboard can be lifted manually or by using a hydraulic system.

traverse canals

Owners sharing experiences from around the world.

CIGALE 15 QR

ALUBAT AMERICA

ALUBAT SHIPYARD

TRAVEL BOOKS

@ 2024 Alubat America. All rights reserved.

• Spill Response
• Munson Built

A Seaworthy Investment

Munson Sport Boats are available in mono-hull or catamaran designs with your choice of propulsion including outboard, sterndrive or waterjet in either gas or diesel. We include a host of unique features as well as a long list of options that transform your Munson Sport Boat into the perfect tool for the demanding activities that you love.

Our clients say it best…

“The functionality and rough water performance of my new 30′ x 10′ is nothing less than superb.”

Read Full Testimonial

Model: 23-28 Sport

Pompano, FL: This nicely finished 23’ sport model is built for fun in the sun. Features include stand up paddle board racks, port & starboard side doors, bow door dive ladder, Flexiteek synthetic teak decking, 15 gallon fresh water washdown system, Yeti cooler, and underwater transom lights. Electronics include a Garmin 7212 plotter with radar, sounder, sat. weather, AIS, auto pilot, VHF and Kenwood KDC stereo with bluetooth and SiriusXM radio.

Specifications

Model: 23-29 Sport

Blakely Island, WA: Located in Washington’s San Juan Islands, Blakely Island is a small private island only accessible by boat or plane. The 23’ K2 is used to transport her owner and guests to and from their island home. Outfitting includes downriggers, crab pot puller, side boarding door and roof mounted kayak racks. The cabin includes seating for four, forced air heater, stereo and Garmin radar/plotter/sounder.

Model: 24-34 Sport

Ketchikan, AK: M/V Paige Two transports her owners and guests to and from their remote island cabin in Southeast Alaska. Outfitting includes seating for 4 passengers, pot hauler, kicker motor, downrigger mounts, rod holders, fish cleaning table, Raymarine plotter/sounder, VHF, cell phone booster antenna, spot light, and trailer.

Model: 24-38 Sport

Dubai, UAE: The Palm Islands add over 78 kilometers to the Dubai coastline. This 24’ Munson is used to service a luxury home on the outer Crecent Island, which forms an 11 km long breakwater. Outfitting includes foredeck seating for 6 passengers, aft cockpit seating for 6 passengers, side boarding door, flip out bow door ramp, and trailer.

Model: 24-45 Sport

Klawock, AK: Located on the west coast of Prince of Wales Island, Klawock is home to the first salmon cannery and oldest salmon hatchery in Alaska. The 24’ Valhalla Boat was built to take advantage of the exceptional fishing and hunting in the area. Options include a bow control station, side boarding door, kicker bracket and trim tabs. The cabin incorporates a Webatso forced air cabin heater and seating for persons.

Model: 25-20 Sport

Anacortes, WA:   This nicely finished 25’ Munson is used to comfortably transport her owners and guests to and from their island home.   The cabin is outfitted with seating for 6 persons, cabin heater, Fusion stereo with subwoofer and a porta-potti.   Additional options include a side boarding door, dive ladder, 6 rod holders and downrigger mounts. Dual Garmin navigation displays, a Flir 364 infrared camera and Zipwake dynamic trim interceptors complete the package.

Model: 26-2 Sport

Camano Island, WA: M/V Miss Tuffy II is the private sport fishing boat of a Camano Island resident. The wheelhouse features forced air heat, teak effect decking and a refrigerator. A head compartment with flushing head can be accessed from an interior wheelhouse door. To make the boat easy to clean and slip resistant, Line-X deck coating was applied to all walking surfaces. The single Volvo D4 power plant offers great fuel economy and range.

Model: 28-1 Sport

Bar Harbor, ME: The Munson line is very popular among island residents. Transporting cargo and passengers to island properties is usually the main purpose of their boats, but we understand that our owners like to do more than just commute. This Munson can haul building materials in the morning and scout great kayak and hiking spots in the afternoon. Special features include Line-X deck coating, kayak storage racks, and diesel cabin heat.

Model: 28-40 Sport

Kodiak, AK: Ugak Bay provides world class saltwater fishing for silver, king and pink salmon, halibut, lingcod and a variety of rock fish. AlpenView Lodge maintains a variety of boats to access these fisheries, the pride of which is the Captain K. The open back wheelhouse features a head compartment. Fishing equipment includes a rocket launcher rod rack, down rigger mounts, and a davit with 12V pot puller. Rod storage is provided by an overhead roof locker.

Model: 28-43 Sport

Sinclair Island, WA: Sinclair Island is located 5 miles north of Anacortes, WA. The island is about 1.5 square miles and is home to only a few private residents. M/V Home Run transports her owners to and from their island home. The wheelhouse features bronze windshield tint, a galley cabinet with fresh water sink, portable head, and a bench seat locker that converts to a berth. A motion-sensing vessel intruder alarm was installed to protect Home Run while in port.

Model: 28-50 Sport

Eliza Island, WA:   Located in Bellingham Bay, Eliza Island is a small private island with a population of 10 residents that is only accessible by boat or plane.  M/V Selkie comfortably transports her owners and guests to and from their island home.  The walk-through cabin is outfitted with seating for six passengers, forced air cabin heater, tinted windows and head compartment.  The main decks, bulwarks and gunwales are finished with Line-X non-skid coating.

Model: 28-68 Tender

The Netherlands: This 28’ Catamaran Tender was built to service a Damen Exploration Yacht. Outfitting includes a unique low profile roof top lifting system, port and starboard boarding doors, removable tow post, fuel transfer pump, fresh water wash down with shower wand, stereo, Garmin navigation suite, flip out pedestrian ramp on the bow door, 12v LED spot light, dive bottle rack, dive ladder, interceptor trim tabs,12v anchor windlass and hydraulic jack plates.

Model: 28-71 Sport

Guemes Island, WA: This 28’ Packcat is used to enjoy all that the San Juan Islands have to offer. A Steelhead Marine crane with wireless controls allows for easy deployment of a Highfield aluminum hull dinghy from the cabin roof. Twin Honda 250’s are installed with Optimus 360 joystick controls with station hold capability. The pilot and co-pilot seats are installed on AirWave suspension bases. Additional outfitting includes a porta-potti, Scotty downriggers, davit with 12V windlass, cabin heater, SeaDek marine flooring, stereo and mooring bridle.

Model: 30-2 Sport

Edmonds, WA: Fishing is the name of the game in the Munson family. Moored in the same marina where Bill Munson got his start in 1963 is his fishing battlewagon, the Munson Express. The aft deck is outfitted with a bait station, 12v downriggers and rod storage. A 50 Hp center-mount kicker controlled by the aft station delivers precise trolling speeds. The wheelhouse features and enclosed head, wrap around settee, and a full galley cabinet.

Model: 30-37 Sport

Ketchikan, AK: Southeast Alaska is home to many Munson landing craft including this 30’ Sport model. Outfitting includes a 10’ long walk-though cabin with seating for 6 passengers, head compartment, galley, forced air cabin heater, 12V wash down pump, rod holders, downrigger mounts, fish cleaning table, side boarding door, davit with pot puller, anchor pulpit with 12V windlass, Garmin radar/plotter/sounder and triple axle trailer.

Model: 30-54 Sport

Anacortes, WA: M/V Serenity Now is used to comfortably transport its owners and guests to and from their island summer home. The full width cabin includes seating for six passengers, Webatso cabin heater, galley, microwave and head compartment. Additional outfitting includes a bow mooring bridle, 12V downriggers, fish cleaning table, davit with pot puller, Fusion stereo and SeaDek flooring. Port and starboard side doors make boarding from the dock easy.

Model: 30-55 Sport

LaConner, WA: M/V High End Hooker is a first class sport fishing machine. The cabin has a large galley, overnight accommodations and head compartment with shower. The aft cockpit incorporates 2 fish holds, downriggers, tackle storage and cleaning station. The bow is outfitted with a Maxilift M110 deck crane with Hydro-Slave pot puller. Additional outfitting includes a 12V anchor windlass, side boarding door, SeaDek flooring and vinyl hull wrap.

Model: 32-2 Sport

Maple Island, MI: True to its name the Maple Express is an island transport vessel between Maple Island and the mainland on Lake Michigan. Twin 350hp Yamaha V8's and a top speed of 52 mph keep transit time to a minimum and the enclosed cabin with forced air cabin heat, convertible settee and porti-potti keep comfort to a maximum. A 12v stern anchor capstan and pulpit were included to allow for beach anchoring at remote destinations.

Model: 32-11 Sport

Pte. Adolfo Lopez Mateos, B.C.S, Mexico: The Lopez Sportsman's Lodge offers visitors shallow water fly fishing trips and blue water game fishing trips. They chose a Munson Catamaran as the platform for their charter company because it offers rough water stability combined with a shallow draft. The Baja Californian is a serious fishing machine. The aft house back is home to a chest freezer powered by roof mounted solar panels and the front of the house features a full width bait tank

Model: 32-21 Sport

Pasagshak Bay, AK: Go Get'Em was designed as an overnight-capable sport fisherman. The cabin is outfitted with a head compartment, hot water shower, full galley, forced air cabin heat and convertible settee to allow her owners to explore parts of Alaska that cannot be reached on day trips. On deck, downrigger mounts, a 12v lifting davit/pot puller and rocket launcher fishing rod holders make Go Get'Em a serious fishing machine.

Model: 32-30 Sport

Sitka, AK: Ocean Lure Charters operates the 32’ Dayna Joy as a six pack charter boat.   Special features include a bow control station, large underdeck fish hold and freshwater   washdown system.   The walk through cabin incorporates seating for six passengers, head compartment, galley with sink, Webatso forced air cabin heater and Fusion stereo.   Garmin navigation electronics are installed at the pilot and co-pilot stations.

Model: 32-42 Sport

Marathon, FL: The Florida Keys boasts some of the best boating activities anywhere.  This 32’ Munson is set up to enjoy all that the area offers, including fishing, diving, kayaking and paddle boarding.  Outfitting includes comfortable seating for 12 passengers, full size head compartment, galley cabinet with sink, live bait tank, insulated fish hold, tow post and lifting davit.  Other options include side dive doors, dive ladder, dive bottle racks, and hydraulic jack plates for shallow water operations.

Model: 32-47 Sport

Shaw Island, WA: M/V Jocko Clark is used to comfortably transport its owners and guests to and from their island summer home. The walk through cabin includes seating for six passengers, Webatso cabin heater, and galley with sink, stove and refrigerator. Additional outfitting includes an aft control station, downriggers, davit with pot puller and bow deck seat lockers. Port and starboard side doors make boarding from the dock easy. Lewmar clear overhead hatches provide natural lighting inside the cabin.

Model: 32-49 Sport

Afognak Island, AK: Located northwest of Kodiak Island, Hodge’s Afognak Island Lodge offers world-class fishing and hunting. Their 32’ Munson is designed to take advantage of the pure Alaska wilderness experience. The walk through cabin includes seating for six passengers, Webatso cabin heater, head compartment and galley. Additional outfitting includes an aft control station, downriggers, davit with pot puller, underdeck fish hold and cleaning table. A Steelhead ES-1000 crane was installed on the cabin roof to facilitate launching & retrieving a Highfield hard bottom dinghy with 9.9 HP outboard. Twin Suzuki 250 outboards were installed with Optimus 360 joystick controls with station hold capability.

Model: 34-2 Sport

Hoonah, AK: The M/V Humdinger is an overnight sport fishing boat in Southeast Alaska. The offset wheelhouse offers an enclosed head compartment with hot water shower, convertible settee and a galley cabinet. A trunk cabin forward of the main console provides sleeping for two. Fishing equipment includes three 12v downrigger mounts and rocket launcher style rod rack. A forward helm station lets fisherman control the boat within arm's reach of the gear.

Model: 34-24 Sport

Port Alsworth, AK: The M/V Jay Hammond is in service at the Samaritan's Purse Foundation lodge in western Alaska. The lodge offers sightseeing, fishing and kayaking opportunities free of charge to wounded military servicemen and women and their spouses. Designed to be wheelchair accessible extra wide cabin doors and fold away seating were integrated into the wheelhouse. Other features include forced air cabin heat and kayak racks on the wheelhouse roof.

Model: 34-43 Sport

San Juan Islands, WA: M/V Kittiwake is used to enjoy all that the San Juan Islands have to offer. Twin Volvo D4-260 HP diesel inboards easily provide a 25-30 knot cruise for travelling long distances. The open stern cockpit provides lots of room to fish and seat passengers. Volvo joystick controls make her easy to maneuver in tight quarters. Additional outfitting includes a side boarding door, hydraulic bow door, davit for pulling pots, Garmin radar/plotter/sounder and SiriusXM Bluetooth stereo.

Model: 36-6 Sport

Lake Baikal, Russia: Lake Baikal is the world’s deepest freshwater lake measuring over 5000 feet deep and stretching over 400 miles. This 36’ Munson sport boat is built to take advantage of the many unique recreational opportunities Lake Baikal offers. The large cabin is equipped with seating for 8 persons, galley with sink, stove, microwave and refrigerator, head compartment and opening skylight roof hatch. Additional outfitting includes seating for 8 in the aft cockpit, sun loungers in the bow deck and hydraulic bow door system.

Model: 36-11 Sport

Stuart Island, BC: Fisherman’s Landing & Lodge lies between northern Vancouver Island and the British Columbia Coast and is only accessible by boat or float plane. Their 36’ Munson is set up for sportfishing charters with seating for 6 passengers, overnight accommodations for two, head compartment with hot water shower, galley with sink, stove and refer, aft control station, side boarding doors, davit with pot puller, 12V bow thruster and SeaStar Optimus 360 joystick control system.

Model: 38-19 Sport

Key Largo, FL: This 38’ Munson is used as a private sports boat in Southern Florida. The 12’6” long walk around cabin is outfitted with seating for 6 passengers, galley with sink, stove and refrigerator, head compartment with shower, air conditioning, and Garmin 7616 radar/plotter/sounder. Additional outfitting includes a 5kw generator, tow post, engine guard, rod holders, anchor windlass, side dive doors, davit and washdown pump.

“In my lifetime, few products have truly exceeded my expectations. I’m guessing that this is true for most of us. Your PACKCAT is one of them. The functionality and rough water performance of my new 30′ x 10′ is nothing less than superb. I thought I’d have to give up some comfort and handling in trade for beachable cargo hauling capability. However, I am delighted with every aspect of this vessel’s performance in nasty, real world conditions. Your claims are true, if not understated. I now own a boat that is superbly built and a pleasure to operate. Your team’s professionalism and pride are reflected in your product! I’ve never worked with a finer group of people.”

Murray LaConner, Washington