- Foil School
- Wing Foil Boards
- Wing Foiling Accessories
- SUP Paddles
- SUP Accessories
- Windsurfer LT
- Windsurfing Boards
- Windsurfing Sails
- Windsurfing Booms
- Windsurfing Masts
- Windsurfing Accessories
- Windsurfing Harnesses
- Wing Foiling
- Wind Foiling
- SUP Foiling
- Foil Assist
- Foiling Accessories
- Ex-Demo / Clearance
- Ball Bearing Blocks 15-21mm
- Ball Bearing Blocks 29-30mm
- Ball Bearing Blocks 38-40MM
- Ball Bearing Blocks 50-60MM
- All Purpose and Plain Bearing Blocks
- Ratchet Blocks
- Exit and Lead Blocks
- High Load and Wire Blocks
- Deck Organisers
- Sheaves and Springs
- Low Friction Guides
- Parrel Beads
- Stic-It Pads
- Jammers and Clutches
- Swivel Cleats
- Cleat Accessories
- Drain Bungs
- Inspection Ports
- Grip & Tapes
- Spar and Spinnaker Pole Fittings
- Tillers and Extensions
- Rudder Fittings
- Trapeze Fittings
- Boom Fittings
- Selden Mast Fittings
- Heel Plugs & Steps
- Sheave Boxes
- Spreaders & Associated Parts
- Selden Spinnaker Pole Fittings
- Rig Tension Gauge
- I-Beam Track
- Wind Indicator
- Winch Handles and Accessories
- Standard Top Winches
- Self Tailing Winches
- Spar Sections & Spinnaker Poles
- Hobie Kayaks
- Hobie Sailboat
- Hobie Eclipse Pedalboards
- Kayak Accessories
- ILCA (Laser)
- Dinghy Covers
- North Sails
- Dinghy Clothing
- Wet Weather Clothing
- Hats, Helmets and Bags
- Casual and Crew Wear
- Clothing Accessories
- Anchor Rope
- Chain & Shackles
- Fenders & Floats
- Boat Hooks & Oars
- Bow Rollers & Bollards
- Compasses & Navigation
- Batteries & Boxes
- Switches & Connectors
- Fish Finder
- Outboard & Fuel Fittings
- Hinges & Hatches
- Canopy Fittings
- Ladders & Handles
- Navigation Lights & Accessories
- Resin & Modifiers
- Skin Fittings & Connections
- Hose Clamps
- Pumps & Accessories
- Double Braid
- Spectra and Dyneema
- Prestretched & Veclock
- Rope Accessories
- Safety Equipment
- Mast Sections
- Spinnaker Poles
- Trailer Accessories
- Balustrade Fittings
Yacht Rigging
- Balustrade & Rigging Tools
- The Sail Loft
- Available Boats
- One Design Parts
- Inflatable Repairs
- Gill Marine
- North Actionsports
BINKS MARINE has a rigging and manufacturing department which specialises in mast rigging for all boat types.
We also have a mobile service trailer.....
Binks Mobile service trailer is professionally set up with our brand new roll swaging machine and all the equipment we need to service yachts large and small.
Our qualified Riggers are very experienced and work efficiently with mast either in the boat or we can crane out depending on the client's requirements.
What we do:
- Replace Standing rigging all size boats - either in column or crane out sections
- New Mast sections
- Australian distributor for Selden Masts
- Running rigging replacement and rope splicing
- Rigging inspection inc reports for insurance companies
- Mast tuning
- Headsail furling Systems (Selden Furlex, Profurl, Reefit etc)
- Installation or pack down of boat for transport
- Architectural systems
- Agents for North Sails
- Sail repair and covers
We can custom make spars, beach dollies and trailers, and modify or custom-make fittings.
Whatever the job give us a call or send us a Customer Enquiry, we're sure to be able to help.
We stock a large range of Stainless Steel wire including 1x19, 7x19 and Dyform wire in various sizes
We can offer hand swaging or roll swaging for wire rope up to code 12 or you can hire a hand tool to do the job yourself.
Mast/Rig inspections
Our expert staff can give your spar a complete overhaul and inspect to see if there is rigging that needs replacing. All our rigging staff has experience in all types of boat rigs and all materials used are top-grade stainless steel. With our new Mobile rigging trailer, we can swage on the job with the mast left in the boat or can crane it out. We supply detailed Rigging reports for all the Insurance companies.
Furling System installations
Our rigging division has installed many different types of furling systems. We can supply and install various brands for any size yacht. Contact us if you would like more information about furling systems available. We sell all the major brands including Selden Furlex, Profurl and Reefit
Lifelines & Wire Rope fabrications
If you need wire fabrications for lifelines or others we can make wires to any requirements. We supply and install various types of balustrading, for more information check out our balustrading page.
Halyards & Splicing
Our riggers can splice almost any type and size of rope, including eye splicing, rope to rope, rope to wire and rope tapering.
Added to your cart:
Hurricane Marine Hobart
- Boat Set Up
- Project Management
- Shipwrights
Welcome to Hurricane Marine – We are your marine specialists
Hurricane Marine is a Hobart based marine services company that works throughout Tasmania, Australia and the world. Our experienced team has a diverse range of skills and knowledge to assist in any task. From slipping and detailing, shipwright works, rigging and splicing to marine salvage we can put a plan together to get you back on the water again.
Hurricane Marine is located in Prince of Wales Bay in the heart of Tasmania’s marine precinct. We have facilities at both the CleanLift Marine and Prince of Wales Marine Complex. This gives us access to deep water berths, hard stand area, undercover work areas, cranes, forklifts; you name it we can make it happen and help get you back on the water again.
Shipwrights with great workmanship using only quality materials. Based at Oyster Cove Marina, Kettering, Tasmania
- Our Services
Some of services we provide
Traditional techniques, paint & varnish, rigging & rope splicing, traditional caulking, hull scraping & antifouling, gelcoat repairs, insurance quotes & repairs, club marine risk assessments.
We are quality shipwrights located in Kettering, Tasmania. Our team will work with you to tailor a solution for your individual needs, whether that be traditional techniques for the wooden boat enthusiast, modern techniques required for the latest in marine craft, or anything in between. No job is too big or too small for our multi-talented team of boat builders. You can be certain that all work will be performed to a high standard and looking exceptional.
RM Marine began in 2010 with Rod Mennitz, a local shipwright trained by the last of the traditional shipwrights with 20 plus years experience. Rod identified a demand in the market for quality workmanship and his passion drove him to deliver a service that is truely the best for your treasured vessels. Rod also holds current Master 5 and MED3 commercial skipper certificates and has extensive experience in offshore sailing, scuba diving and commercial fishing.
Get in touch with us today to discuss your project
To have a chat about what we can do for you, please contact Rod on 0428 507 420 . Or alternatively, you can complete the following inquiry form.
© 2024 RM Marine.
ABLE MARINE
Able Marine Shipwrights
Painting Solutions
Full Rigging and Repairs
Boat Building
WEBASTO HEATERS
VETUS MAXWELL
Fibreglass Repair
Able Marine - Shipwrights of Kettering.
61 ferry road, kettering, tas : 0429 174 168 or 0418 301 929), our services.
Paint solutions
Everything you need in one place
Recent work.
Hull respray
Sam and Angelo did a great job respraying my boat. It looks as good as new and is finished in a quality two pack enamel which will last many years.
Assist with Refitting
The guys let me tie my boat up near their workshop and helped me find and fit a second hand anchor winch. I couldn’t have done it without them.
New Engine Installation
Thank you Able Marine for your professional installation of a new 50 hp marine diesel engine in Pandora. The job was done on time, on budget with quality workmanship. I could not find fault with the job, and communication was great.
Window Replacement
The Severn has big windows and when it came time to replace them I turned to Able Marine. The secure berthing in front of their workshop coupled with their many years of expertise guaranteed the job was done to world class standards and at a fair price.
Installers of
- COVID-Safe Travel in Tasmania
AT YOUR SERVICE
Yacht Services Tasmania offers comprehensive, shore-based solutions for yachts of all sizes and purposes from your family cruiser to the luxury superyacht. Our team provides invaluable local knowledge and connections to ensure that crew and guests are thoroughly equipped to truly engage and enjoy their travels around Tasmania.
At your service for a seamless experience during your time in Tasmania, YST is your one point of contact in handling all your yachting needs and is your first port of call.
Convenience
Yacht agency.
Providing services that relate to the passage requirements of your yacht from carefully planned cruising permits and the safe navigation in Tasmanian waters to port operations such as customs clearance, biosecurity and marina formalities. We can assist in the quick turnover of your vessel with laundry and cleaning to be charter ready.
We offer many other services such as continued business operations whether it is a venue space for meetings or local phone/data connectivity to courier services of important documents or ship spare parts. We also provide support with any medical assistance for guests and crew.
ENTRY REQUIREMENTS
VESSEL INFORMATION
CRUISING PERMITS
BUSINESS SERVICES
MARINA FORMATLITIES
MEDICAL ASSISTANCE
LAUNDRY AND CLEANING
Entry Requirements
Vessel Information
Cruising Permits
Business Services
Marina Formalities
Medical Assistance
Laundry and Cleaning Services
PROVISIONING
With close connections to producers and suppliers to source locally grown products we provide extraordinary goods and services that can be transported to your vessel anywhere on the island.
From galley equipment and tableware; to customised bed linen and towels; to native floral arrangements for charters; to chandlery supplies for the deck or engineering departments.
FOOD AND BEVERAGE ESSENTIALS
SHIP CHANDLERY
LOCAL PRODUCE STRAIGHT FROM FARM
DINING AND TABLEWARE
UNIFORM, LINEN AND TOWELS
INTERIOR AND GALLEY EQUIPMENT
DECK SUPPLIES AND MAINTENANCE
ELECTRICAL PARTS
Food and Beverage Essentials
Local Produce Straight From Farm
Deck Supplies and Maintenance
Interior and Galley Equipment
Dining and Tableware
Ship Chandlery
Uniform, Linen and Towels
Electrical Parts
Our concierge services are designed to cater to your specific requirements. We develop personalised itineraries and activities that fit your lifestyle and budget. Anything from guided tours and hikes, or relaxing spa treatments, to booking a luxurious shore-side stay in a five-star hotel or a hidden keep for total privacy.
Enjoy the convenience and luxury of local knowledge as we share our tips on where to go for wellness and health to invigorate the body and soul whether it is of quiet reflection such as yoga or a massage or staying strong with a crossfit class or mountain biking.
EVENT PLANNING
RESTAURANTS AND ENTERTAINING
MEDIA SERVICES
TRIP PLANNING AND ITINERARIES
SECURITY OPERATIONS
SHORE-SIDE STAYS, LUXURY ACCOMMODATION, HIDDEN GETAWAYS AND KEEPS
HEALTH AND BEAUTY
GROUND AND AIR TRANSPORT/ TRANSFERS
OUTDOOR ACTIVITIES
COURIER, MAIL AND FREIGHT FORWARDING
HELICOPTER AND SEAPLANE TOURS
COURIER, MAIL AND FREIGHT
Our concierge services are designed to cater to your specific requirements. We develop personalised itineraries and activities that fit your lifestyle and budget. Anything from guided tours and hikes, relaxing spa treatments, to booking a luxurious shore-side stay in a five-star hotel or a hidden keep for total privacy.
Restaurants and Entertainment
Trip Planning and Itineraries
Event Planning
Media Services
Outdoor Activities
Health and Beauty
Ground and Air Transport/ Transfers
Helicopter and Seaplane Tours
Courier, Mail and Freight
Security Operations
Shore-side Stays, Luxury Accommodation, Hidden Getaways and Keeps
MAINTENANCE
A local network of suppliers and contractors, we have the best people on hand to assist, maintain and repair any issue that may arise. Bunkering and lubricants are on offer at competitive prices.
BUNKERING- FUEL AND LUBRICANTS
SPARE PARTS AND EMERGENCY REPAIRS
CARPET AND UPHOLSTERY
ELECTRICS AND ENGINEERING
PEST CONTROL AND WASTE REMOVAL
SAFETY EQUIPMENT
BUNKERING FUEL AND LUBRICANTS
Bunkering Fuel and Lubricants
Spare Parts and Emergency Repairs
Carpentry and Upholstery
Electrics and Engineering
Safety Equipment
Pest Control and Waste Removal
WOULD YOU LIKE MORE INFORMATION?
Ian Brett Spar's & Rigging
Boat & yacht equipment, ian brett spar's & rigging opening hours in mt stuart.
- Attract more customers by adding more content such as opening hours, logo and more
- Remove your competitors from this page
Boat & Yacht Equipment
Radio Communications Equipment & Service
Surveyors--Cargo & Marine
Electronics Manufacturing Equipment & Supplies
Plastics Products Manufacturers & Wholesalers
Marine Consultants
- About Yellow Pages
- Order or cancel your book
- Terms of use
- Get a free listing
- Digital marketing solutions
- Business hub
- myYellow login
ONE OF AUSTRALIA'S LARGEST YACHT MAST PROVIDERS
View our list of Products and Services
Check our latest news, get in touch with us.
IF YOU HAVE ANY QUESTIONS, DO NOT HESITATE TO CONTACT US
- Riggtech – Yacht & Architectural Rigging
- Riggtech Bosun’s Locker
- Rope and Splicing
- Standing Rigging / Rig Inspections
- Spar Building, Servicing & Painting
- Custom Fabrication
- Balustrading
- Shade Structures
- Architectural Gallery
- Yachting Gallery
- Supplier’s / Agencies
- Online Shop
Standing Rigging Inspections, Maintenance and Replacement
Standing Rigging Inspections – One part of sailboats and yachts that must be inspected, maintained, or even replaced when necessary is the standing rigging. It is comprised of fixed lines, wires, or rods that are designed to support each mast or bowsprit on sailing vessels. These specific components likewise reinforce the spars against increased loads when wind interacts with the sails.
Standing Rigging Inspections
A Standing Rigging Inspection must be done first to check the condition of the standing rigging, as issues with the standing rigging if not fix correctly and quickly can result in the mast falling down. When conducting inspections, you can easily identify components that require repairs and replacements.
Normally, the replacement of standing rigging should be done every 10 years. Generally, insurance companies today require the standing rigging be replaced approximately every 7-10 years, depending on how often, or how far the yacht is sailed, they may require the rigging to be replaced earlier than 7 years. (Check with your insurance company, as policies may vary) Insurance companies also commonly request a professional rigging inspection and survey of the yacht when a used boat is sold or if a new policy is to be obtained. If the standing rigging is in excess of 7-10 years, most insurance companies will not insure the yachts rigging.
When carrying out standing rigging inspections, you must start at the masthead. Looking closely for any signs of corrosion, cracks, or breaks of any kind in the standing rigging (ei. In the wire, terminal ends, rod, toggles, pins, backing plates etc.) as you are slowly lowered down the mast. When we conduct rigging inspections, we check over all mast and sailing components, all the way down to the chainplates. Other components that must be checked for any damages or performance issues include swivels, back and forestay fittings, tang plates and toggle fittings, shrouds, swaged terminal ends, mainsail track, spreaders, turnbuckles, chainplates, blocks, running rigging, sheaves, and spars etc.
Riggtech recommends getting an annual professional rigging inspection to check over all sailing components to ensure smooth and precise sailing, regardless of the conditions you’ll face.
Maintenance
Whether you are a racer or cruiser, it is important to maintain your yacht. Here are some parts of rigging that need to be checked and ways on how to maintain them. You can do it yourself or if you don’t have the time, we can do it for you!
- Halyard Swivels : Oiling halyard swivels makes releasing clips or removing twists in rope easier and smoother. (Purchase Harken OneDrop from our online shop)
- Sail Tracks : To make hoisting and lowering sails easy and smooth, it is a good practice to spray the tracks or bolt rope with some lubricant, we recommend Harken Sailkote. It is a silicon spray that stays extremely slippery after it dries. Head to our online shop to purchase some!
- Furler Bearings : Greasing furler bearings is quick and easy and makes furling sails in and out a breeze. Make sure to drop the sail to grease the bearings in the swivel and in the drum.
- Sheaves : Sheaves in the mast, on the deck or in blocks should be oiled, so they run smoothly, preventing corrosion and seizure of the bearings or sheaves. (Purchase Harken OneDrop from our online shop)
- Split Pins and Split Rings : Checking split pins and split rings is important to prevent clevis pins from falling out and leading to catastrophic failures. Checking for sharp edges in these is also important to prevent the sail from catching and potentially ripping. We recommend using amalgamating tape, electrical tape or silicon for protection and prevention.
Replacement
The most efficient and cost-effective way to replace the standing rigging to a yacht is to remove the entire mast and rigging from the yacht. This way you can do all the stays at the same time, you can make the pairs the same lengths and it is also much easier to check over the whole mast and make any repairs and replacements where needed. At Riggtech we make sure we replace every standing rigging component from the top pins to the bottom pins, so there isn’t any weak link.
The alternative is replacing the standing rigging while the mast is in the boat, we do not recommend this, as you have to support the rig systematically as you de-tension, remove, make and replace individual stays to the mast. This is a very time-consuming process, because it involves a lot of mast climbing, making individual stays and tensioning and de-tensioning, it can also be extremely dangerous if you don’t know what you’re doing.
Components that have either corroded or have obtained huge cracks and damages should be replaced right away to avoid compromising the whole standing rigging. If you want to know more about its inspection, maintenance, and replacement, feel free to contact us at Riggtech .
Optimized by: Netwizard SEO
Recent Posts
- Harken Ball Bearings: High-Performance Options for Marine Applications
- Clearing Boat Holding Tanks: ProPower Tank Treatment as The Main Solution
- Rocna Stainless Steel Anchors from Riggtech Helps Ensure Safe and Sound Mooring
- Ronstan Soft Shackles and How They Redefine Boat Rigging Connections
- Harken Marine Grip Tape Available at Riggtech: Navigate the Deck Safely
- Harken Winch Grease: Maintain Winch Parts for Optimal Efficiency
- RescueME AIS MOB Devices: Ensure Safety in Maritime Emergencies
- TefGel Available at Riggtech: Preventing Galling and Corrosion
- Musto Sailing Footwear Available at Riggtech: Navigate the Seas in Style
- Harken Winch Grease Available at Riggtech: Optimise Winch Performance
Riggtech Bosun’s Locker Newport:
[email protected] (02) 9997 2382
Royal Prince Alfred Yacht Club 9 /16 Mitala Street, Newport NSW 2106, Australia
Riggtech Pty. Limited:
[email protected] (02) 9997 8100
Royal Prince Alfred Yacht Club 2 /16 Mitala Street, NEW PORT BEACH, NSW 2106, Australia
- Architectural
- Shipping & Returns
- Terms & Conditions
Copyright © 2024 Riggtech. All Rights Reserved.
Web Design by: Netwizard Design
DOYLE SAILS TASMANIA
ABOUT THIS LOFT Doyle Sails Tasmania was originally established in 1964 as “Peter Johnston’s Sailmakers” by Peter Johnston in Sullivan’s Cove. The company quickly developed a reputation for quality, service and building strong relations with the marine industry in Tasmania. The company is now owned and operated by Nick Dineen and Brian Moroney, after working for the Johnston family as managers for many years.
After many successful years trading as Peter Johnston Sailmakers the loft joined Fraser Sails which eventually transitioned to the worldwide Doyle group. Doyle Sails Tasmania has always been committed to building the highest quality sails (in house) using the latest technology and materials available. Partnering with the Doyle group enables Doyle Tasmania to work with the best lofts, sail designers and membrane manufacturers in the industry. We have developed a close working relationship with Doyle group which ensures Tasmanian customers of the highest of quality of sail design and membranes, whilst still building the sails here in Tasmania.
FACILITIES Our loft is a full manufacturing facility ideally located in the iconic “Muirs Boatyard”, on the water front between the Sydney to Hobart finish line and two of Tasmania’s largest yacht clubs. Doyle Tasmania on site services include, sailmaking, marine cover, rigging, shade sails and chandlery. We are arguably the largest sailmaking operation in Tasmania and our staff include qualified sailmakers with up to 45 years’ experience. We have a strong commitment to training new apprentices, ensuring the future of our company and sailmaking in Tasmania.
Over the decades Doyle Tasmania's clients have had success in everything from one design national titles, club pennants, offshore races, local and global passage making. Doyle Tasmania looks forward to building relationships with new and existing clients and helping sailors of all forms to achieve their goals.
ADDRESS Muirs Boatyard, 44 Napoleon Street, Battery Point, Hobart, Tasmania 7004, Australia
TELEPHONE +61 3 6225 6707
EMAIL Send us a message
MEET THE TEAM
Nick Dineen Managing Director & Sales Consultant +61 407 936 544 [email protected]
Brian Moroney Director & Chandlery Manager +61 3 6225 6707 [email protected]
Sam Edmunds Northern Tasmania Sales Consultant +61 419 327 998 [email protected]
DOYLE COVERS Doyle sails Tasmania cover team is committed to building the highest quality marine and general covers using the highest quality materials available. Products include Boom bags, boom covers, boom tents, dodgers, Bimini’s custom sheet bags and wind screen covers. Material include Weathermax, Sunbrella, Strata glass, Ferrari, Tenara threads.
DOYLE CHANDLERY Need boat bits, come and check out our shop. Doyle Sails Tasmania’s ship chandlery was established in 2016 to compliment the growing range of services at Muirs boatyard. Our chandlery manager (Brian Moroney) has worked in the ship chandlery business for over 15 years and can advise on anything from the top of the mast to the bottom of the keel. We stock Selden, Furlex, Almast, Harken, Ronstan, Lewmar, Whichard Karver, IRB ropes, Marlow ropes, Slam, Red Paddle Co, BLA, RWB Basham, International Paints and epoxy’s, Hempel paints, 316 fastenings.
DOYLE SHADE SAILS Trust your next job to experienced, local and qualified sailmakers backed by leading international sail making group. Doyle Sails Tasmania has a long and successful history of supplying engineered premium fabric Sails, outdoor umbrellas, structures and services to the Tasmania community. We offer a range of products that include: permanent membrane structures, umbrella’s, shade sails and café blinds. Doyle Sails Tasmania shade products are constructed from the highest quality materials, ensuring that our sails are durable, long lasting and pleasing to the eye. Additional products available include our range of architectural umbrellas. These visually pleasing, permanent wind rated structures provide safe year round weather protection and are available with a variety of finished options. Also available are a variety of professional services including: Structural design of shade products, Engineering and certification, Shade auditing, Fabric testing
DOYLE INDUSTRIAL Projects large or small, Doyle Tasmania has been producing industrial canvas and PVC products for Tasmanian industry for decades. We produce on time to specification anything from: membrane roofs, straps, mesh filter nets, bags, tarps, screens, heavy duty covers, webbing nets, dive vests, dive parachutes, compressor covers. Our recent clients include: Richardson Divine Marine, Taylor Bros Engineering, Incat, CSIRO, Australian Antarctic Division, Apco Engineering, ASD Diving, Offshore Unlimited, Tasmanian Shipping Supplies, Forestry Tasmania.
DOYLE RIGGING We are able to help you get your rig right, with options from full replacement of running rigging, mast tuning, sales of Selden Masts, Booms, Spin poles and sprits. We also sell rigging hardware, furling equipment, rope and provide splicing services, wire swaging and crimping.
Custom sheets and braces Lazy jacks. Lifelines and jackstays. Mooring lines. Tender lifting bridles. Architectural rigging. Balustrading
Connection denied by Geolocation Setting.
Reason: Blocked country: Russia
The connection was denied because this country is blocked in the Geolocation settings.
Please contact your administrator for assistance.
Hanse 430E Piong Bokunani Just Listed
Used yachts for sale, sail monohulls 40ft > 50ft, hanse boats for sale, hanse 430e boats for sale.
Lone sailor 20 miles off Cornish coast rescued
A sailor has been rescued after he was unable to control his yacht due to rigging issues 20 miles (32km) off the Cornish coast.
Sennen Cove lifeboat was sent to the sailor at 01:40 GMT on Sunday.
He was north west of Longships Lighthouse and was unable to control the vessel, the RNLI said.
The Sennen lifeboat crew found the yacht and began towing it to Newlyn before swapping the tow with the Penlee lifeboat at 07:00, two miles (3.2km) from the harbour.
The RNLI said the crew had to reconnect the tow twice but arrived safely in the harbour by 11:00.
A spokesperson for the RNLI Penlee Lifeboat Station said: "The yacht skipper was very appreciative of the assistance provided by both lifeboat crews and Falmouth Coastguard.
"He also very much enjoyed a sausage sandwich and coffee at the RNLI’s Penlee Lifeboat Station."
- Phone was my lifeline, man rescued by RNLI says
- RNLI volunteers celebrate 200 years of saving lives
- Rescued yachtsman very lucky - lifeboat coxswain
IMAGES
COMMENTS
We specialise in rigging replacement and new installations. Able Marine - Shipwrights of Kettering. 61 Ferry Road, Kettering, TAS : 0429 174 168 or 0418 301 929)
Rigging. For many yachts the rig is its engine room. It requires regular servicing and maintenance just like your car or boat engine would. Our masts and rigging are often left out in the elements 24/7 and need to be checked and cared for regularly. We are to preform a variety of rigging tasks to keep you out on the water doing what you love.
NSW. The guy that had the Free-range Sailing YouTube channel and circumnavigated Australia in his Clansman 30 two years ago seemed extremely knowledgeable. He re-rigged with dyneema in Tasmania during a lengthy comprehensive refit down there and a number of their episodes are dedicated to the assistance of Peter Greig a rigger there.
With our new Mobile rigging trailer, we can swage on the job with the mast left in the boat or can crane it out. We supply detailed Rigging reports for all the Insurance companies. Furling System installations Our rigging division has installed many different types of furling systems. We can supply and install various brands for any size yacht.
Welcome to Hurricane Marine - We are your marine specialists. Hurricane Marine is a Hobart based marine services company that works throughout Tasmania, Australia and the world. Our experienced team has a diverse range of skills and knowledge to assist in any task. From slipping and detailing, shipwright works, rigging and splicing to marine ...
Rigging & Rope Splicing. Traditional Caulking. Hull Scraping & Antifouling. Gelcoat Repairs. Insurance Quotes & Repairs. Club Marine Risk Assessments. Get in Touch. About Us RM Marine. We are quality shipwrights located in Kettering, Tasmania. Our team will work with you to tailor a solution for your individual needs, whether that be ...
Able Marine - Shipwrights of Kettering. 61 Ferry Road, Kettering, TAS : 0429 174 168 or 0418 301 929)
We are a yacht agency formed to support captains, managers, owners and crew in assisting with the increasing demands of managing yachts. Based in Hobart and covering the entire state and islands of the Furneaux Group, King, Bruny and Maria. At your service for a seamless experience during your time in Tasmania, YST is your one point of contact ...
AT YOUR SERVICE. Yacht Services Tasmania offers comprehensive, shore-based solutions for yachts of all sizes and purposes from your family cruiser to the luxury superyacht. Our team provides invaluable local knowledge and connections to ensure that crew and guests are thoroughly equipped to truly engage and enjoy their travels around Tasmania.
Ian Brett Spar's & Rigging Boat & Yacht Equipment - Mt Stuart, Tasmania, 7000, Business Owners - Is Ian Brett Spar's & Rigging in Mt Stuart, TAS your business? Attract more customers by adding more content such as opening hours, logo and more - Yellow Pages® directory
Allyacht Spars Australia has been involved in the yacht rigging business since its establishment in the mid 1970's. Since that time AYS has come to be one of Australia's largest yacht mast providers. Over the years AYS has evolved to incorporate the latest in ideas and technologies available to Australian and Asian marine industry.
Standing Rigging Inspections - One part of sailboats and yachts that must be inspected, maintained, or even replaced when necessary is the standing rigging. It is comprised of fixed lines, wires, or rods that are designed to support each mast or bowsprit on sailing vessels. These specific components likewise reinforce the spars against increased loads
Hobart: 6272 8000 Launceston: 6337 8455. We are the proud members of: Lifting Equipment - Sales & Servicing. Tas Lifting Sales & Servicing have a skilled staff of 16. We service the state of Tasmania with 3 sales representatives, 2 based in Hobart to service the South and the East Coast. The sales rep in Launceston services Launceston, the West ...
Northern Tasmania Sales Consultant. +61 419 327 998. [email protected]. DOYLE COVERS. Doyle sails Tasmania cover team is committed to building the highest quality marine and general covers using the highest quality materials available. Products include Boom bags, boom covers, boom tents, dodgers, Bimini's custom sheet bags and wind screen ...
hamma Regatta Yacht Rigging Fittings - Tas Lifting - Tasmania Lifting Equipment. Hobart: 6272 8000. Launceston: 6337 8455. hamma Regatta Yacht Rigging Fittings. hamma™ Regatta Turnbuckle Toggle-Swage Bronze Body (Available for either Metric or Imperial Wire)
ANTHONY OTTO 'LITTLE FISH' Everything Marine Australia. The Boat Works provides outstanding facilities and support for the yacht cruising community. The staff and tradespeople are friendly and extremely competent and the facilities are excellent including the BBQ area, air conditioned lounge, courtesy cars and free shower and laundry ...
Fairlie Riggers -Our Story. John McColgan - Master Rigger - began an apprenticeship in 1979 and completed his training in 1983. John worked on various projects for the Royal Navy while employed with BAE Systems based in Glasgow. His role was to manufacture rigging warrants which included guard wires, flight deck nets, lifelines, mooring ropes ...
Hobart: 1 Lampton Avenue, Derwent Park, TAS 7009Launceston: 279 Invermay Road, Invermay, TAS 7248Cambridge: 4/2 Railway Court, Cambridge, TAS 7170. Australian Boating Supplies - Chandlery. Brierley Marine Tasmania has a highly skilled staff of 16 and is Tasmanian owned and operated since 1986. We service the whole of Tasmania with three sales ...
C/O Motor Yacht Club of Tasmania 1 Ford Parade Lindisfarne TAS 7015 AUSTRALIA. Call Now ... hard stands, all marine trades (electricians, mechanics, painters, riggers, boat builders) and marine surveyors. Contact Steve Taylor 0400 934 974 or 03 6267 4259. 8 USED BOATS for Sale Sail Monohulls Power Boats Trailer Boats Power Recent Sales Used ...
Ronstan rigging screws. Sail. 6 of these SS to suit up to 50 ft yacht. Never been used cost over $400 each. Buy 6 for $600 post. $600. Orford, TAS. 16/01/2024.
Custom built by Mick Drake, Triabunna, Tasmania. 48' 7" - 14.80m. 2012. Thalassa is a canoe stern fishing boat. Her lines were drawn by G Thyer based on North Sea Trawlers. She was first launched in…. Gosford NSW, New South Wales. AU $425,000 Expressions of interest View Listing.
Royal Yacht Club Of Tas, Sandy Bay, Hobart. Region. Tasmania. Registration. 2801. Rego Expiry. 31/12/2024. Designer. Judel / Vrolik & Co. Builder. Hanse Yachts, Germany ... The 2023 insurance survey report states that the spars and standing rigging appear in excellent condition and have been inspected by riggers. Deck Gear. Twin (Carbon Fibre ...
rigging yacht Tasmania Clear all. 38ft Roberts Steel Cruiser/Yacht. Single Hull; 38 ft; Roberts; For Sale, 38 ft steel cruiser, 4 bunk forward cabin, 1 double aft, spacious midship and galley, 65 hp Perkins engine, just serviced, runs well, 4 lts/hr@ 7kts. New garmin gps combo, new batterys. 8k sand blast and paint job on hull.
Organised crime bosses and career criminals face losing their ill-gotten flashy cars and yachts under Victorian law reforms.
A sailor has been rescued after he was unable to control his yacht due to rigging issues 20 miles (32km) off the Cornish coast. Sennen Cove lifeboat was sent to the sailor at 01:40 GMT on Sunday.